Synthesis of poly(methacrylate)s containing 4-hydroxybenzoate functional groups

Synthesis of poly(methacrylate)s containing 4-hydroxybenzoate groups as the functional groups was carried out. First, a methacrylate monomer having 4-benzyloxybenzoate group was prepared. Then, free-radical copolymerization of the monomer with methyl methacrylate in various feed ratios initiated by AIBN was demonstrated to give copolymers, followed by deprotection of the benzyl groups, giving rise to the desired polymers containing 4-hydroxy benzoate groups.     

Robust isocratic liquid chromatographic separation of functional poly(methyl methacrylate)

The separation of telechelic poly(methyl methacrylate) (PMMA) prepolymers based on the number of end-groups under critical liquid chromatography (LC) conditions has been studied using a bare-silica column, which can interact with polar functional groups. The critical solvent compositions for non-functional, mono-functional and bi-functional PMMAs were determined in normal-phase LC using mixtures of acetonitrile and dichloromethane (DCM) of varying composition as the mobile phase. The telechelic prepolymers were successfully separated according to hydroxyl (OH) functionality (with zero, one, or two OH groups, respectively) under the critical conditions, in which fast (5 min), base-line separations were obtained independent of molecular weight. Changing the column temperature, flow rate, and mobile-phase composition within a certain range did not affect the functionality separation. Therefore this isocratic LC separation method is quite robust. Evaporative light-scattering detector (ELSD) calibration curves were used for the quantitative analysis of functional PMMA prepolymers.     

Isospecific polymerizations of alkyl methacrylates with a bis(alkyl)Yb complex and formation of stereocomplexes with syndiotactic poly(alkyl methacrylate)s

Yb[C(SiMe₃)₃]₂ initiates the living polymerization of methyl methacrylate (MMA) at −78°C to give the polymer with M_n of 51.0×10⁴ (M_w/M_n=1.1) and high isotacticity (97%) in a quantitative yield. Mixing of the acetone solution of resulting polymer (M_n=16.3×10⁴) with the acetone solution of syndiotactic poly(MMA) (M_n=15.7×10⁴) prepared by the (C₅Me₅)₂SmMe(THF) initiator produces desired stereocomplex in high yield bearing very high T_m whose tensile modulus is higher than the respective isotactic and syndiotactic poly(MMA)s. Yb[C(SiMe₃)₃]₂ also generated isotactic (98%) poly[2-(dimethylamino)ethyl methacrylate] (DMEMA), and (C₅Me₅)₂SmMe(THF) affords the syndiotactic (97%) polymer in high yields. The combination of isotactic poly(MMA)-block-poly(DMEMA) (97/3) and syndiotactic poly(MMA)-block-poly(DMEMA) (97/3) provides the amphiphathic stereocomplex. In sharp contrast to the catalysis of Yb[C(SiMe₃)₃]₂ in toluene, the addition of THF or HMPA resulted in the formation of syndio-rich poly(MMA).     

Local free volume and structural relaxation studied with photoisomerization of azobenzene and persistent spectral hole burning in poly(alkyl methacrylate)s at low temperatures

The final extent of trans‐to‐cis photoisomerization of an azobenzene probe in various amorphous polymers has been used in previous studies for estimating local free volume and its fluctuation in polymer solids. However, there have been few studies on what kinds of molecular motion cause the fluctuation of local free volume at low temperatures. The onset of local structural relaxation (molecular motion) can be observed with temperature cycling experiments in persistent spectral hole burning (PSHB). Thus, in the present article, the fluctuation of local free volume observed in trans‐to‐cis photoisomerization of azobenzene is related to the local structural relaxation observed in PSHB for poly(alkyl methacrylate)s with various ester groups, i.e., methyl (PMMA), ethyl (PEMA), n‐propyl (PnPMA), isopropyl (PiPMA), and isobutyl (PiBMA) groups. In the final cis fraction, rapid decrease, from 20 to 4 K in PEMA, PnPMA, and PiPMA, and from 86 to 20 K in PiBMA, is observed. These temperature regions of the rapid decrease in final cis fraction in these polymers agree well with those where the hole width in PSHB temperature cycling experiments begins to increase for the same polymers. For example, PEMA begins its ester ethyl group rotation at 17 K, which was primarily observed with PSHB, causing the drastic decrease in final cis fraction of azobenzene from 20 to 4 K. The final cis fractions at 4 K for these poly(alkyl methacrylate)s reflect the intrinsic sizes of the local free volume, except in the case of PMMA, and are compared with the reported results of positron annihilation lifetime measurements. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3098–3105, 2000     

Analysis of amino acids and proteins using a poly(methyl methacrylate) microfluidic system

Plastic microchips are very promising analytical devices for the high-speed analysis of biological compounds. However, due to its hydrophobicity, their surface strongly interacts with nonpolar analytes or species containing hydrophobic domains, resulting in a significant uncontrolled adsorption on the channel walls. This paper describes the migration of fluorescence-labeled amino acids and proteins using the poly(methyl methacrylate) microchip. A cationic starch derivative significantly decreases the adsorption of analytes on the channel walls. The migration time of the analytes was related to their molecular weight and net charge or pI of the analytes. FITC-BSA migrated within 2 min, and the theoretical plate number of the peak reached 480,000 plates/m. Furthermore, proteins with a wide range of pI values and molecular weights migrated within 1 min using the microchip.     

Miscibility and interactions of polystyrene/polyolefine and polystyrene/poly(n-alkyl methacrylate) mixtures in dilute xylene solutions

The miscibility and intermolecular interactions between polystyrene (PS) and poly(ethylene-co-propylene) (EPC), as well as between PS and long-chain poly(alkyl methacrylates) (PAMA), namely, poly(dodecyl methacrylate) (PDDMA) and poly(octadecyl methacrylate) (PODMA), in dilute xylene solutions at 30 °C were studied. Investigated polymers are widely used as rheology modifiers, i.e. viscosity index improvers and pour point depressants for lubricating mineral oils. The specific and reduced viscosities of two- and three-component polymer solutions as well as intrinsic viscosities and Huggins’ parameter values were determined as functions of the polymer mixture composition and overall polymer concentration. The reduced viscosity was found to be linearly dependent on the overall polymer concentration. The observed viscosities of polymer mixtures were intermediate to those of the mixture constituents; the values decrease in the order: EPC > PS > PAMA. The specific viscosities of all the polymer mixtures obtained as the experimental results and calculated applying the Catsiff-Hewett and Krigbaum-Wall theoretical equations were considered. Since all the polymer/polymer pairs showed the negative viscometric interaction parameter values (Δb₁₂ < 0), the PS/EPC and EPC/PAMA mixtures were found to be immiscible. The observed repulsive molecular interactions originate from the differences in polymer composition and molar masses. This conclusion was supported by calculations employing the group contribution approach of Coleman, Graf and Painter. The calculated values of interaction parameters for (co)polymer blends, Λ₁₂, were 5.47, 6.42 and 13.1 J cm⁻³ for PS/PDDMA, PS/PODMA and PS/EPC, respectively.     

Effects of ceramic filler in poly(vinyl chloride)/poly(ethyl methacrylate) based polymer blend electrolytes

Effects of nano-ceramic filler titanium oxide (TiO₂) have been investigated on the ionic conductance of polymeric complexes consisting of poly(vinyl chloride) (PVC)/poly(ethyl methacrylate) (PEMA), and lithium perchlorate (LiClO₄). The composite polymer blend electrolytes were prepared by solvent casting technique. The TiO₂ nanofillers were homogeneously dispersed in the polymer electrolyte matrix and exhibited excellent interconnection with PVC/PEMA/PC/LiClO₄ polymer electrolyte. The addition of TiO₂ nanofillers improved the ionic conductivity of the polymer electrolyte to some extent when the content of TiO₂ is 15 wt%. The addition of TiO₂ also enhanced the thermal stability of the electrolyte. The changes in the structural and complex formation properties of the materials are studied by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) techniques. The scanning electronmicroscope image of nano-composite polymer electrolyte membrane confirms that the TiO₂ nanoparticles were distributed uniformly in the polymer matrix.     

Preparation and proton conductivity of acid-doped 5-aminotetrazole functional poly(glycidyl methacrylate)

Proton conducting polymer membranes have become crucial due their applications in fuel cells as source of clean energy. In this work, we synthesized poly(glycidyl methacrylate) (PGMA) by conventional free radical polymerization of GMA using azobisisobutyronitrile (AIBN) as initiator. PGMA was modified with 5-aminotetrazole by ring opening of the epoxide group. The composition of the polymer was studied by elemental analysis (EA) and the structures were characterized by FT-IR and solid ¹³C NMR spectra. Thermogravimetry analysis (TG) and differential scanning calorimetry (DSC) were employed to examine the thermal stability and homogeneity of the materials, respectively. Polymers were doped with H₃PO₄ at several stoichometric ratios. The effect of doping on the proton conductivity was studied via impedance spectroscopy. Maximum proton conductivity of acid-doped PGMA-aminotetrazole was found to be 0.01 S/cm at 150 °C in the anhydrous state.     

Analyses of synthetic antioxidants by capillary electrochromatography using poly(styrene-divinylbenzene-lauryl methacrylate) monolith

In this study, several organic polymer-based monoliths prepared by single step in situ copolymerization of styrene- and methacrylate ester-based monomers (styrene (S), divinylbenzene (DVB) and lauryl methacrylate (LMA)) were developed as stationary phases of capillary electrochromatography (CEC) for the analyses of synthetic antioxidants. These monoliths were characterized by examining the SEM image, IR spectrum, and measuring the pore size, surface area, conversion yield, and thermal decomposition temperature. The polymerization procedure was optimized by varying the reaction temperature, the reaction time, and the LMA-styrene ratio. The LMA-styrene ratio had the most significant influence on the peak symmetry of butylated hydroxyanisole (BHA) and 2, 6-di-tert-butyl-4-methyl phenol (BHT), the latter being greatly affected by excessive peak tailing in the poly(S-DVB) monolith. It showed that the interaction between the poly(S-DVB) monolith and the antioxidant (BHT or BHA) was significantly altered by the insertion of LMA. Compared with the best HPLC and CE methods previously reported, this proposed CEC method provides a comparable separation ability for the five antioxidants analyzed. This study demonstrates that the potentiality of poly(S-DVB-LMA) monolith as stationary phase, especially for CEC system, because of high thermal stability and good column reproducibility.     

Terpolymerization of methyl methacrylate, poly(ethylene glycol) methyl ether methacrylate or poly(ethylene glycol) ethyl ether methacrylate with methacrylic acid and sodium styrene sulfonate: determination of the reactivity ratios

Materials bearing ionic monomers were obtained through free radical terpolymerization of methyl methacrylate (MMA), poly(ethylene glycol) methyl ether methacrylate (PMEM) or poly(ethylene glycol) ethyl ether methacrylate (PEEM) with methacrylic acid (MA) and sodium styrene sulfonate (NaSS). The reactions were carried out in dimethyl sulfoxide using azobis(isobutyronitrile) as initiator. The reactivity ratios of the different couple of monomers were calculated according to the general copolymerization equation using the Finnemann-Ross, Kelen-Tüdos and Tidwell-Mortimer methods. The values of the reactivity ratios indicate that the different monomer units can be considered as randomly distributed along the chains for terpolymerizations of MMA, PMEM or PEEM with MA and NaSS. The average composition of the comonomers in the different terpolymers were calculated, showing a good agreement between the experimental and theoretical compositions. The instantaneous compositions are constant until about 70% of conversion. For higher conversions, the insertion of ionic monomers increases or decreases according to the system studied.     

Thermogravimetric analysis of poly(alkyl methacrylates) and poly(methylmethacrylate-g-dimethyl siloxane) graft copolymers

The thermal stabilities of various poly(alkyl methacrylate) homopolymers and poly(methyl methacrylate-g-dimethyl siloxane) (PMMA-g-PSX) graft copolymers have been determined by thermogravimetric analysis (TGA). As expected, the thermal stabilities of poly(alkyl methacrylates) were a function of the ester alkyl group, and polymerization mechanism. In particular, thermally labile linkages, which result from termination during free radical or nonliving polymerization mechanisms, decrease the ultimate thermal stabilities of the polymers. However, graft copolymers, which were prepared by the macromonomer technique with free radical initiators, exhibited enhanced thermal stability compared to homopolymer controls. A more complex free radical polymerization mechanism for the macromonomer modified polymerization may account for this result. © 1994 John Wiley & Sons, Inc.     

Transition from miscibility to immiscibility in blends of poly(methyl methacrylate) and styrene-acrylonitrile copolymers with varying copolymer composition: a DSC study

The glass transition and the structural relaxation processes have been studied in blends of poly(methyl methacrylate) (PMMA) and styrene-acrylonitrile (SAN) copolymers with different acrylonitrile (AN) contents. The 50/50 wt.% blend of PMMA with the SAN copolymer containing 30 wt.% of AN is immiscible, while blends with copolymers containing between 13 and 26 wt.% of AN are miscible. Thus the upper limit of miscibility is between 26 and 30 wt.% of AN. The temperature dependence of the relaxation times of the conformational rearrangements of polymer chains around the glass transition have been determined in the blends and pure components by modelling DSC thermograms obtained after different thermal histories in each sample. The slope in the Arrhenius diagram logτ vs 1/T around the glass transition temperature is significantly smaller in the blend which is closer to the upper limit of miscibility than in the other miscible blends in which SAN copolymer contains less AN. The change of slope can be ascribed to a distribution in the glass transition temperatures of the different rearranging regions, reflecting the appearance of a microheterogeneity in the blend that cannot be detected as a double glass transition in the blend.     

Novel study on the liquid crystalline behavior of poly(methacrylate)s with biphenyl side groups

We report the synthesis and characterization of a series of liquid crystalline polymers substituted with the 4′-methoxybiphenyl-4-yloxy group. The spacer length is varied from 4–8 methylene units. The materials are characterized by polarized light microscopy, differential scanning calorimetry, and X-ray analysis. All homologues show highly ordered phases. Additionally, the butylene polymer shows a broad nematic mesophase. For the first time, the narrow nematic phase of the hexylene homologue could be confirmed experimentally. X-ray analysis of the polymers made exact assignments of the low temperature phases possible, thus giving access to the analysis of the arrangement of the mesogenes within the layers. The pentylene homologue shows a distinct deviation from the behavior of the other polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2669–2679, 1998     

Radiation degradation of poly(arylene ether ketone)s

The resistance of five poly(arylene ether ketone)s with related chemical structures to degradation by ionizing radiation has been studied by ESR spectroscopy and yields of volatile products. All of the polymers showed high resistance to radiation with low yields of radicals after irradiation in vacuum at 77 K (when up to 84% of the radicals were identified as radical anions) and much lower yields at 300 K. The yields of volatile products were much less than reported for poly(arylene sulfone)s [1, 2]. Methyl substitution on a main-chain aromatic ring decreased the radiation resistance, but methane only comprised 10% of the volatile products from the methyl-substituted polymers. A polymer containing an isopropylidene group in the main chain and a substituent aromatic carbonyl showed significantly decreased radiation resistance. Extremely low radical yields were obtained after irradiation in air at 300 K, contrary to many polymers. XPS analysis showed an increase in C–O bonds on the surface after irradiation in air.     

Nanostructured poly(urethane)s and poly(urethane-urea)s from reactive solutions of poly[styrene-b-butadiene-b-(methyl methacrylate)]-triblock copolymers

Poly[Styrene-b-Butadiene-b-(Methyl Methacrylate)], SBM triblock copolymers have been incorporated in different polyurethane, PU formulations in order to prepare nanostructured materials. Macrodiols used for PU synthesis were based on a central bis-phenol A, BPA unit with two hydroxyl-terminated oligo(oxypropylene), BPA-PO_x or oligo(oxyethylene), BPA-EO chains with varying lengths. The initial solubility of the three blocks and the rheological behavior of the solutions in macrodiols and also in two diisocyanates, isophorone diisocyanate, IPDI, and 1,3-xylylene diisocyanate, XDI have been first characterized. The PMMA block is the most soluble and its role during the reaction is to stabilize the initial nanostructure or to control the reaction-induced microphase separation.Block copolymers can be dissolved first in the macrodiol, or preferably in the diisocyanate. With BPA-PO_x and low SBM content (<10 wt%), transparent linear or crosslinked PU with well dispersed triblock nanoparticles have been prepared, depending on the molar mass of the macrodiol and on the concentration of diblock SB impurities present in the triblock. For high SBM concentrations (>50 wt%), a twin screw extruder had to be used for the blending. Under well-defined conditions, transparent linear PUs and linear segmented polyurethane-ureas have been prepared.This study confirms that for designing a nanostructured material from a reactive mixture with a triblock additive, one block, called “the nanostructuring block” has to remain soluble up to the end of the reaction.     

Hemoglobin binding from human blood hemolysate with poly(glycidyl methacrylate) beads

Metal-chelating affinity beads have attracted increasing interest in recent years for protein purification. In this study, iminodiacetic acid (IDA) was covalently attached to the poly(glycidyl methacrylate) [PGMA] beads (1.6 μm in diameter). Cu(2+) ions were chelated via IDA groups on PGMA beads for affinity binding of hemoglobin (Hb) from human blood hemolysate. The PGMA beads were characterized by scanning electron microscopy (SEM). The PGMA-Cu(2+) beads (628 μmol/g) were used in the Hb binding-elution studies. The effects of Hb concentration, pH and temperature on the binding efficiency of PGMA-Cu(2+) beads were performed in a batch system. Non-specific binding of Hb to PGMA beads in the absence of Cu(2+) ions was very low (0.39 mg/g). The maximum Hb binding was 130.3 mg/g. The equilibrium Hb binding increased with increasing temperature. The negative change in Gibbs free energy (ΔG°<0) indicated that the binding of Hb on the PGMA-Cu(2+) beads was a thermodynamically favorable process. The ΔS and ΔH values were 102.2 J/mol K and -2.02 kJ/mol, respectively. Significant amount of the bound Hb (up to 95.8%) was eluted in the elution medium containing 1.0 M NaCl in 1 h. The binding followed Langmuir isotherm model with monolayer binding capacity of 80.3-135.7 mg/g. Consecutive binding-elution experiments showed that the PGMA-Cu(2+) beads can be reused almost without any loss in the Hb binding capacity. To test the efficiency of Hb depletion from blood hemolysate, eluted portion was analyzed by fast protein liquid chromatography. The depletion efficiency for Hb was above 97.5%. This study determined that the PGMA-Cu(2+) beads had a superior binding capacity for Hb compared to the other carriers within this study.     

Methyl methacrylate in poly(methyl methacrylate)--validation of direct injection gas chromatography

Gas chromatography (GC) was investigated for the determination of residual methyl methacrylate (MMA) in heat-processed poly(methyl methacrylate) (PMMA) denture base material emphasizing recovery and validation. Standard solutions of MMA and emulsion-polymerized PMMA in dichloromethane were analysed, before and after distillation by a room-temperature air stream into a liquid nitrogen trap, and in the presence of PMMA by direct injection. Quantitative NMR analysis using dimethyl sulphoxide as internal calibration standard in deuterated chloroform solutions provided validation. Good concordance was observed between results under all conditions; no problems arose from direct injection of PMMA solution for GC. Good straight line responses in log-log plots were generally observed. For GC and MMA: log-log calibration curve (slope: 0.9552 +/- 0.0051, r2: 0.9992, n = 32) indicated some non-linearity (t = 8.875, p approximately 4 x 10(-10)). Distillation gave slope: 0.9751 +/- 0.0213 (NS versus unity; t = 1.172, p > 0.25). For PMMA solutions, distillation (r2: 0.9301) gave greater scatter than direct injection (r2: 0.9704). For NMR: log-log plot of calculated versus actual MMA (slope: 0.9363 +/- 0.0157, r2: 0.9969, n = 13) again indicated non-linearity (t = 4.0682, p = 0.0019). PMMA solutions gave slope: 0.9477 +/- 0.0328, r2 = 0.9858 (NS versus unity; t = 1.5941, p = 0.13). Determination of MMA in PMMA by GC is recommended.     

Production of poly(methyl methacrylate) particles by dispersion polymerization with mercaptopropyl terminated poly(dimethylsiloxane) stabilizer in supercritical carbon dioxide

Poly(methyl methacrylate) (PMMA) particles were produced by dispersion polymerization of methyl methacrylate in the presence of mercaptopropyl terminated poly(dimethylsiloxane) (MP-PDMS) in supercritical carbon dioxide at about 30 MPa for 24 h at 65 °C. The particle diameter could be controlled in a size range of submicron to micron by varying MP-PDMS concentration. The MP-PDMS worked as not only a chain transfer agent but also a colloidal stabilizer, which was named tran stab.Part CCLI of the series Studies on suspension and emulsion     

Biofouling-resistance expanded poly(tetrafluoroethylene) membrane with a hydrogel-like layer of surface-immobilized poly(ethylene glycol) methacrylate for human plasma protein repulsions

In general, it is a challenge to control the highly polar material grafting from the chemically inert Teflon-based membrane surface. This work describes the surface modification and characterization of expanded poly(tetrafluoroethylene) (ePTFE) membranes grafted with poly(ethylene glycol) methacrylate (PEGMA) macromonomer via surface-activated plasma treatment and thermally induced graft copolymerization. The chemical composition and microstructure of the surface-modified ePTFE membranes were characterized by Fourier transform infrared spectroscopy (FT-IR), contact angle, and bio-atomic force microscopy (bio-AFM) measurements. Biofouling property of the modified membranes was evaluated by the measurements of the plasma protein (γ-globulin, fibrinogen, or albumin) adsorption determined using an enzyme-linked immunosorbent assay (ELISA). In general, the hydrophilicity of the surface of ePTFE membranes increases with increasing the grafting degree of the copolymerized PEGMA. The highly hydrated PEGMA chain on the resulting ePTFE membranes was found to form a surface hydrogel-like layer with regulated coverage in aqueous state, which can be controlled by the content of PEGMA macromonomer in the reaction solution. The relative protein adsorption was effectively reduced with increasing capacity of the hydration for the PEGMA chain grafted on the ePTFE membrane surface. From both results of protein adsorption and platelet adhesion test in vitro, it is concluded that the PEGMA-grafted hydrophilic ePTFE membranes could provide good biofouling resistance to substantially reduce plasma protein and blood platelet fouling on the membrane surface in human body temperature.     

Plasticizer-assisted bonding of poly(methyl methacrylate) microfluidic chips at low temperature

As an important phthalate plasticizer, dibutyl phthalate (DBP) was employed to decrease the bonding temperature of poly(methyl methacrylate) (PMMA) microfluidic chips in this work based on the fact that it can lower the glass transition temperature of PMMA. The channel plates of the PMMA microchips were fabricated by the UV-initiated polymerization of prepolymerized methyl methacrylate between a silicon template and a PMMA plate. Prior to bonding, DBP solution in isopropanol was coated on PMMA covers. When isopropanol in the coating was allowed to evaporate in air, DBP was left on the PMMA covers. Subsequently, the DBP-coated covers were bonded to the PMMA channel plates at 90 °C for 10 min under pressure. The channels in the complete microchips had been examined by optical microscope and scanning electron microscope. The results indicated that high quality bonding was achieved below the glass transition temperature of PMMA (∼105 °C). The performance of the PMMA microfluidic chips sealed by plasticizer-assisted bonding has been demonstrated by separating and detecting ionic species by capillary electrophoresis in connection with contactless conductivity detection.