Modification of composites of block copolymers–gold nanoparticles with enzymes and their characterization by electrochemical techniques

In this work, the poly(styrene-vynil pyridine) block copolymer was used as a porous pattern to study the electrodeposition of gold inside the pores, as a new method to obtain gold nanoparticles. The porous pattern left by the copolymer film onto a conductive glass surface was characterized by atomic force microscopy (AFM), evidencing pores of 30 nm diameter. After the electrodeposition, 30 nm diameter gold nanoparticles were obtained and they were characterized by cyclic voltammetry (CV) and AFM, and then used to study the adsorption of glucose oxidase enzyme. The adsorption process of glucose oxidase on gold nanowires was investigated by CV and electrochemical impedance spectroscopy. The morphological and capacitance results indicate that the block copolymer–gold nanoparticle composite seems to be a good candidate to design biosensors and immunosensors.     

Cholesterol effects on vesicle pools in chromaffin cells revealed by carbon-fiber microelectrode amperometry

Cell–cell communication is often achieved via granular exocytosis, as in neurons during synaptic transmission or neuroendocrine cells during blood hormone control. Owing to its critical role in membrane properties and SNARE function, cholesterol is expected to play an important role in the highly conserved process of exocytosis. In this work, membrane cholesterol concentration is systematically varied in primary culture mouse chromaffin cells, and the change in secretion behavior of distinct vesicle pools as well as pool recovery following stimulation is measured using carbon-fiber microelectrode amperometry. Amperometric traces obtained from activation of the younger readily releasable and slowly releasable pool (RRP/SRP) vesicles at depleted cholesterol levels showed fewer sustained fusion pore features (6.1 ± 1.1% of spikes compared with 11.2 ± 1.0% for control), revealing that cholesterol content influences fusion pore formation and stability during exocytosis. Moreover, subsequent stimulation of RRP/SRP vesicles showed that cellular cholesterol level influences both the quantal recovery and kinetics of the later release events. Finally, diverging effects of cholesterol on RRP and the older reserve pool vesicle release suggest two different mechanisms for the release of these two vesicular pools.     

Oxidation‐induced the Formation of Vesicles from Ferrocene Derivative Superamphiphiles

The stimuli‐responsive vesicles were prepared via electrochemical oxidation on the mixture solution of ferrocenylmethyl‐trimethylammonium iodide (FcMI) and sodium deoxycholate (NaDC). The vesicle structure and morphology are characterized respectively by transmission electron microscopy (TEM), dynamic light scattering (DLS) and atomic force microscopy (AFM). The vesicle shells can be clearly observed by TEM with the thickness ranging from several to several tens of nanometers and their outer diameters at the range of 50‐200 nm. The formation of vesicular structures is also supported via AFM measurements, and the ratio of the diameter and height of the nanospheres was estimated to be ca. 10, indicating the shell collapse. The obtained results are significant for the preparation of smart supramolecular aggregates.     

Influence of nanotopography on phospholipid bilayer formation on silicon dioxide

We have investigated the effect of well-defined nanoscale topography on the 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) lipid vesicle adsorption and supported phospholipid bilayer (SPB) formation on SiO2 surfaces using a quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM). Unilamellar lipid vesicles with two different sizes, 30 and 100 nm, were adsorbed on pitted surfaces with two different pit diameters, 110 and 190 nm, as produced by colloidal lithography, and the behavior was compared to results obtained on flat surfaces. In all cases, complete bilayer formation was observed after a critical coverage of adsorbed vesicles had been reached. However, the kinetics of the vesicle-to-bilayer transformation, including the critical coverage, was significantly altered by surface topography for both vesicle sizes. Surface topography hampered the overall bilayer formation kinetics for the smaller vesicles, but promoted SPB formation for the larger vesicles. Depending on vesicle size, we propose two modifications of the precursor-mediated vesicle-to-bilayer transformation mechanism used to describe supported lipid bilayer formation on the corresponding flat surface. Our results may have important implications for various lipid-membrane-based applications using rough or topographically structured surfaces.     

Penetration of living cell membranes with fortified carbon nanotube tips

We have fabricated robust nanosurgical needles suitable for single cell operations by modifying multiwalled carbon nanotube (MCNT)-terminated atomic force microscopy (AFM) tips. Extra-long MCNT AFM tips were prepared and fortified with molecular layers of carbon to overcome mechanical instabilities and then coated with an outer shell of gold to promote chemical versatility. The terminal diameters of the final fabricated tips were approximately 30-40 nm, and the MCNT probes were several micrometers in length. We illustrate the capability of these modified MCNT tips to carry nanoparticulate payloads and to penetrate the plasma membrane of living pleural mesothelial cells at the smallest indentation depths (100-200 nm) and lowest penetration forces (100-200 pN) currently reported for these procedures.     

纳米孔阵列阳极氧化铝膜的制备和表征

本文通过在0℃、0.5mol·L^-1的草酸溶液中阳极氧化高纯铝片的方法制得了阳极氧化铝(AAO)膜，并用扫描电子显微镜(SEM)和原子力显微镜(AFM)对AAO膜的形貌和结构进行了表征。结果表明，阻挡层AAO膜中大小一致的膜胞在铝/氧化铝界面上排成六方形阵列;有孔层AAO膜中含有高度有序的纳米孔阵列和膜胞阵列，并且孔的直径和膜胞的尺寸都具有较窄的分布。另外，考察了阳极氧化电压对膜胞尺寸、孔径大小、孔密度和膜胞密度的影响，表明在一定的电压范围内，膜胞和孔径都随电压的升高而增大，而孔密度和膜胞密度却随电压的升高而减小。     

Lanthanide-containing polymer nanoparticles for biological tagging applications: nonspecific endocytosis and cell adhesion

We describe the synthesis and characterization of element-encoded polystyrene nanoparticles with diameters on the order of 100 nm and a narrow size distribution. Individual particles contain ca. 10(3) chelated lanthanide ions, of either a single element or a mixture of elements. These particles were effectively internalized by nonspecific endocytosis into three cell lines associated with human leukemia. Using an assay based upon ICP-MS detection, we could monitor quantitatively cell adhesion induced by cell differentiation of THP-1 cells in response to phorbol ester stimulation (PMA) in single cell type or mixed cultures.     

纳米电极时空分辨监测单个PC12细胞多巴胺量子释放

细胞作为有机体结构与生命活动的基本单位 ,在生命体内的新陈代谢和信息传递等方面起着关键作用 .而细胞受激释放是其参与生命活动的形式之一 ,在整个生命活动中起着非常重要的作用 ,不正常的细胞释放会导致生物体功能紊乱 ,以致产生各种疾病 .对细胞释放进行研究在神经生物学、生物化学、临床、病理和药学等多个学科领域中都具有非常重要的意义[1] .由于细胞的超微体积以及胞内单个囊泡量子释放发生的时间是毫秒级的 ,因此需要一种快速灵敏检测的手段才能对胞内释放情况进行实时监测 .对于多巴胺、肾上腺素、去甲肾上腺素及五羟色胺等具有…     

Phospholipids as an alternative to direct covalent coupling: surface functionalization of nanoporous alumina for protein recognition and purification

Anodic aluminum oxide (AAO) substrates with aligned, cylindrical, non-intersecting pores with diameters of 75 nm and depths of 3.5 or 10 μm were functionalized with lipid monolayers harboring different receptor lipids. AAO was first functionalized with dodecyl-trichlorosilane, followed by fusion of small unilamellar vesicles (SUVs) forming a lipid monolayer. The SUVs' lipid composition was transferred onto the AAO surface, allowing us to control the surface receptor density. Owing to the optical transparency of the AAO, the overall vesicle spreading process and subsequent protein binding to the receptor-doped lipid monolayers could be investigated in situ by optical waveguide spectroscopy (OWS). SUV spreading occurred at the pore-rim interface, followed by lateral diffusion of lipids within the pore-interior surface until homogeneous coverage was achieved with a lipid monolayer. The functionality of the system was demonstrated through streptavidin binding onto a biotin-DOPE containing POPC membrane, showing maximum protein coverage at 10 mol% of biotin-DOPE. The system enabled us to monitor in real-time the selective extraction of two histidine-tagged proteins, PIGEA14 (14 kDa) and ezrin (70 kDa), directly from cell lysate solutions using a DOGS-NTA(Ni)/DOPC (1:9) membrane. The purification process including protein binding and elution was monitored by OWS and confirmed by SDS-PAGE.     

F-Actin reassembly during focal adhesion impacts single cell mechanics and nanoscale membrane structure

Focal adhesions play an important role in cell spreading,migration,and overall mechanical integrity.The relationship of cell structural and mechanical properties was investigated in the context of focal adhesion processes.Combined atomic force microscopy(AFM) and laser scanning confocal microscopy(LSCM) was utilized to measure single cell mechanics,in correlation with cellular morphology and membrane structures at a nanometer scale.Characteristic stages of focal adhesion were verified via confocal fluorescent studies,which confirmed three representative F-actin assemblies,actin dot,filaments network,and long and aligned fibrous bundles at cytoskeleton.Force-deformation profiles of living cells were measured at the single cell level,and displayed as a function of height deformation,relative height deformation and relative volume deformation.As focal adhesion progresses,single cell compression profiles indicate that both membrane and cytoskeleton stiffen,while spreading increases especially from focal complex to focal adhesion.Correspondingly,AFM imaging reveals morphological geometries of spherical cap,spreading with polygon boundaries,and elongated or polarized spreading.Membrane features are dominated by protrusions of 41-207 nm tall,short rods with 1-6 μm in length and 10.2-80.0 nm in height,and long fibrous features of 31-246 nm tall,respectively.The protrusion is attributed to local membrane folding,and the rod and fibrous features are consistent with bilayer decorating over the F-actin assemblies.Taken collectively,the reassembly of F-actin during focal adhesion formation is most likely responsible for the changes in cellular mechanics,spreading morphology,and membrane structural features.     

Formation and stability of a suspended biomimetic lipid bilayer on silicon submicrometer-sized pores

We report the fabrication of a thin silicon membrane with an array of micrometer and submicrometer pores that acts as a scaffold for suspending a lipid bilayer. We successfully deposited a lipid bilayer by the Langmuir-Blodgett method on a synthetic silicon membrane bearing arrays of pores with sizes of 1000, 650, and 300 nm. Topographic images obtained by AFM showed a suspended lipid film spanning the pores, whatever the pore size. Higher stability of bilayers supported on smaller pores was shown by AFM characterization. These results represent an important first step to creating a biomimetic environment to study cell membrane dynamics and/or in developing a biosensor.     

Pushing the size limits in the replication of nanopores in anodized aluminum oxide via the layer-by-layer deposition of polyelectrolytes

We report on the successful replication of the smallest pores in anodized aluminum oxide (AAO) via the layer-by-layer (LBL) deposition of polyelectrolytes to date to yield free-standing, open nanotubes with inner and outer diameters (±2σ) down to 37 ± 4 and 52 ± 19 nm, respectively. This work is based on the fabrication of defined arrays of highly regular nanopores by anodic oxidation of aluminum. Pores with pore diameters between 53 ± 9 and 356 ± 14 nm and interpore distances between 110 ± 3 and 500 ± 17 nm were obtained using an optimized two-step anodization procedure. 3-(Ethoxydimethylsilyl)propylamine-coated pores were replicated by alternating LBL deposition of poly(styrenesulfonate) and poly(allylamine). The detrimental adsorption of polyelectrolyte on the top surface of the template that typically results in partial pore blocking was eliminated by controlling the surface energy of the top surface via deposition of an ultrathin gold layer. The thickness of the deposited LBL multilayer assembly at the pore orifice agreed to within the experimental error with the thicknesses measured by variable angle spectroscopic ellipsometry and atomic force microscopy (AFM) for layers assembled on flat substrates. The selective dissolution of the alumina template afforded free-standing, open polymer nanotubes that were stable without any cross-linking procedure. The nanotubes thus obtained possessed mean outer diameters as small as 52 nm, limited by the size of the AAO template.     

Atomic force microscopy of microvillous cell surface dynamics at fixed and living alveolar type II cells

Scanning probe techniques enable direct imaging of morphology changes associated with cellular processes at life specimen. Here, glutaraldehyde-fixed and living alveolar type II (ATII) cells were investigated by atomic force microscopy (AFM), and the obtained topographical data were correlated with results obtained by scanning electron microscopy (SEM) and confocal microscopy (CM). We show that low-force contact mode AFM at glutaraldehyde-fixed cells provides complementary results to SEM and CM. Both AFM and SEM images reveal fine structures at the surface of fixed cells, which indicate microvilli protrusions. If ATII cells were treated with Ca²⁺ channel modulators known to induce massive endocytosis, changes of the cell surface topography became evident by the depletion of microvilli. Low force contact mode AFM imaging at fixed ATII cells revealed a significant reduction of the surface roughness for capsazepine and 2-aminoethoxydiphenyl-borate (CPZ/2-APB)-treated cells compared to untreated control cells (Rc of 99.7 ± 6.8 nm vs. Rc of 71.9 ± 4.6 nm for N = 22), which was confirmed via SEM studies. CM of microvilli marker protein Ezrin revealed a cytoplasmic localization of Ezrin in CPZ/2-APB-treated cells, whereas a submembranous Ezrin localization was observed in control cells. Furthermore, in situ AFM investigations at living ATII cells using low force contact mode imaging revealed an apparent decrease in cell height of 17% during stimulation experiments. We conclude that a dynamic reorganization of the microvillous cell surface occurs in ATII cells at conditions of stimulated endocytosis.     

Sub-100 nm patterning of supported bilayers by nanoshaving lithography

Sub-100 nm wide supported phospholipid bilayers (SLBs) were patterned on a planar borosilicate substrate by AFM-based nanoshaving lithography. First, a bovine serum albumin monolayer was coated on the glass and then selectively removed in long strips by an AFM tip. The width of vacant strips could be controlled down to 15 nm. Bilayer lines could be formed within the vacant strips by vesicle fusion. It was found that stable bilayers formed by this method had a lower size limit of approximately 55 nm in width. This size limit stems from a balance between a favorable bilayer adhesion energy and an unfavorable bilayer edge energy.     

Modulation of cyanobacterial photosystem I deposition properties on alkanethiolate Au substrate by various experimental conditions

We present results from atomic force microscopy (AFM) images indicating various experimental conditions, which alter the morphological characteristics of self-assembled cyanobacterial PS I on hydroxyl-terminated self-assembled alkanethiolate monolayers (SAM/Au) substrates. AFM topographical images of SAM/Au substrates incubated in solutions containing different PS I concentrations solubilized with Triton X-100 as the detergent reveal large columnar aggregates (～100 nm and hence, much taller than a single PS I trimer) at high PS I concentrations. Depositions from dilute PS I suspensions reveal fewer aggregates and relatively uniform surface topography (～10 nm). Confocal fluorescence microscopy analysis of fluorescently tagged PS I deposited on to SAM/Au substrates using electric field and gravity driven techniques reveal preliminary indications of directionally aligned PS I attachments, besides corroborating a uniform monolayer formation, for the former deposition method. The complex attachment dynamics of PS I onto SAM substrates are further investigated from the AFM images of PS I/SAM/Au substrates prepared under different experimental conditions using: 1) PS I isolated as monomers and trimers 2) adsorption at elevated temperatures, and 3) different detergents with varying pH values. In each of the cases, the surface topology indicated distinct yet complex morphological and phase characteristics. These observations provide useful insight into the use of experimental parameters to alter the morphological assembly of PS I on to SAM substrates en route to successful fabrication of PS I based biohybrid photoelectrochemical devices.     

原子力显微镜对中性粒细胞与K562细胞超微结构及机械性能的探测

采用原子力显微镜在纳米尺度下对正常中性粒细胞与白血病细胞株K562细胞的表面形貌及细胞的硬度、粘附力进行定性定量分析.结果表明,相比正常中性粒细胞的平均粗糙度(Ra=5.31±1.52 nm),K562细胞的超微结构更为复杂,细胞表面平均粗糙度显著升高(Ra=26.54±8.01 nm).此外,细胞的生物机械特性也有显著差别:中性粒细胞的硬度为9.5±1.3 kPa,AFM针尖与中性粒细胞的非特异性粘附力为135±23.4 pN;K562细胞的硬度为3.0±0.8 kPa,AFM针尖与K562细胞的非特异性粘附力为95±15.6 pN.AFM在单细胞水平上的探测表明,中性粒细胞和K562细胞的超微结构和机械特性均有明显差异.通过对细胞表面超微结构和力学特性的探测可以诊断慢性粒细胞白血病,原子力显微镜有望成为临床肿瘤诊断的工具.     

Assessment of functional changes in nanoparticle-exposed neuroendocrine cells with amperometry: exploring the generalizability of nanoparticle-vesicle matrix interactions

Using two of the most commonly synthesized noble metal nanoparticle preparations, citrate-reduced Au and Ag, the impacts of short-term accidental nanoparticle exposure are examined in primary culture murine adrenal medullary chromaffin cells. Transmission electron microscopy (TEM), inductively coupled plasma atomic emission spectroscopy (ICP-AES) and Alamar Blue viability studies revealed that nanoparticles are taken up by cells but do not decrease cell viability within 48 hours of exposure. Carbon-fiber microelectrode amperometry (CFMA) examination of exocytosis in nanoparticle-exposed cells revealed that nanoparticle exposure does lead to decreased secretion of chemical messenger molecules, of up to 32.5% at 48 hours of Au exposure. The kinetics of intravesicular species liberation also slows after nanoparticle exposure, between 30 and 50% for Au and Ag, respectively. Repeated stimulation of exocytosis demonstrated that these effects persisted during subsequent stimulations, meaning that nanoparticles do not interfere directly with the vesicle recycling machinery but also that cellular function is unable to recover following vesicle content expulsion. By comparing these trends with parallel studies done using mast cells, it is clear that similar exocytosis perturbations occur across cell types following noble metal nanoparticle exposure, supporting a generalizable effect of nanoparticle-vesicle interactions.     

Mechanical Properties of Poly(dimethylsiloxane)-block-poly(2-methyloxazoline) Polymersomes Probed by Atomic Force Microscopy

Poly(dimethylsiloxane)-block-poly(2-methyloxazoline) (PDMS-b-PMOXA) vesicles were characterized by a combination of dynamic light scattering (DLS), cryogenic transmission electron microscopy (cryo-TEM), and atomic force microscopy imaging and force spectroscopy (AFM). From DLS data, a hydrodynamic radius of ～150 nm was determined, and cryo-TEM micrographs revealed a bilayer thickness of ～16 nm. In AFM experiments on a silicon wafer substrate, adsorption led to a stable spherical caplike conformation of the polymersomes, whereas on mica, adsorption resulted also in vesicle fusion and formation of bilayer patches or multilayer stacks. This indicates a delicate balance between the mechanical stability of PDMS-b-PMOXA polymersomes on one hand and the driving forces for spreading on the other. A Young's modulus of 17 ± 11 MPa and a bending modulus of 7 ± 5 × 10(-18) J were derived from AFM force spectroscopy measurements. Therefore, the elastic response of the PDMS-b-PMOXA polymersomes to external stimuli is much closer to that of lipid vesicles compared to other types of polymersomes, such as polystyrene-block-poly(acrylic acid) (PS-b-PAA).     

孔结构对活性炭吸附水溶液中铅离子的影响

选取三种表面化学性质相近的活性炭(AC),通过等温吸附实验考察活性炭对水溶液中铅离子的吸附性能,利用扫描电子显微镜(SEM)观察活性炭的表面微观形貌,通过低温(77 K)液氮吸附测定活性炭的比表面积和孔容,并分别以密度泛函理论(DFT)和Barrett-Joyner-Halenda (BJH)法计算微孔和中孔的孔径分布.结果表明:选用的三种活性炭AC1、AC2、AC3在比表面积和总孔容上呈依次下降的趋势,但表面开放孔均匀分布的AC2,具有最高的饱和吸附量,孔结构类似颗粒堆积孔的AC3,具有与表面开放孔分布集中的AC1相近的饱和吸附量;通过对孔结构与吸附量的关联分析可知,在活性炭吸附铅离子的过程中, 0.4-0.6 nm的孔是有效吸附孔, 10.5-20.6 nm、20.6-55.6 nm、5.2-10.5 nm三个区间的孔则会对吸附产生阻碍作用.     

探索脑化学——纳米电化学监测单细胞、单囊泡、突触间隙释放化学信号分子及形貌分析

针对已有的微米及纳米电化学监测单囊泡、单突触及突触间隙释放, 扫描电化学显微镜用于单细胞释放前后形貌变化的定量分析, 微流控与阵列电极集成芯片, 用于细胞灌注培养及监测释放化学信号分子的研究工作进行了评述. 同时, 对近几年此领域的前沿研究进行了简要评论, 并对其未来发展提出了一些新的观点.