Anti-stokes luminescence of Zn<Subscript>0.6</Subscript>Cd<Subscript>0.4</Subscript>S solid solutions with adsorbed organic dye molecules and few-atom silver clusters

For microcrystals of Zn_0.6Cd_0.4S with adsorbed molecules of a number of organic dyes, we have observed sensitized anti-Stokes luminescence excited by radiation with wavelengths in the range 610–750 nm and flux density 10¹⁴–10¹⁵ photons/cm²·sec. The positions of the bands in the excitation spectra for such luminescence match those of the absorption spectra for the adsorbed dye molecules, which is evidence in favor of a cooperative mechanism for its appearance. We have shown that enhancement of the anti-Stokes luminescence is possible when silver atoms and few-atom clusters appear on the Zn_0.6Cd_0.4S surface in addition to the dye molecules. We hypothesize that its excitation in the latter case occurs as a result of two-photon optical transitions. These transitions occur sequentially, with transfer of an electron or the electronic excitation energy from the dye molecules to silver atoms and few-atom clusters adsorbed on the surface of Zn_0.6Cd_0.4S, creating deep localized states in the bandgap with photoionization energies 1.80–2.00 eV. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 5, pp. 617–621, September–October, 2007.     

Anti-Stokes luminescence of microcrystals of AgCl0.95I0.05 solid solutions with adsorbed organic dye molecules

We have studied the effect of the characteristic features of aggregation of some organic dye molecules during adsorption on the parameters of low-temperature sensitized anti-Stokes luminescence (SASL) in microcrystals of AgCl_0.95I_0.05 solid solutions. We have demonstrated the possibility in principle of varying the position of the maximum in the SASL excitation spectrum and its intensity by varying the concentration of the dye molecules deposited on the surface of the AgCl_0.95I_0.05 microcrystals. We have observed that the intensity of SASL excitation for these samples increases as different types of dye aggregates form on their surface. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 5, pp. 592–596, September–October, 2006.     

VUV luminescence of Er<Superscript>3+</Superscript> ions in LiYF<Subscript>4</Subscript> and BaY<Subscript>2</Subscript>F<Subscript>8</Subscript> crystals

Vacuum ultraviolet luminescence of Er³⁺ ions in LiYF4 and BaY₂F₈ crystals has been investigated. It is revealed that under excitation by 193 nm radiation from an ArF excimer laser the interconfigurational 5d–4f radiative transitions in Er³⁺ ions are observed. It is shown that from the LiYF₄:Er crystal only the spin-forbidden luminescence (λ = 165 nm) is detected, whereas both the spin-forbidden (λ = 169 nm) and spin-allowed (λ = 160.5 nm) components are observed from the BaY₂F₈:Er crystal.     

Thermoelectric properties of Pb<Subscript>0.22</Subscript>Sn<Subscript>0.78</Subscript>Te<Ge> solid solution

Temperature dependences of thermoelectric parameters of the Pb_0.22Sn_0.78Te〈Ge(0.5 at%)〉 solid solution in the temperature range 140–440 K are investigated with the purpose to determine the perspectiveness of these solutions as a material for thermoelements.     

Preparation and characterization of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> nanorod by low heating solid state coordination method

Cathode material LiMn₂O₄ nanorod was prepared by annealing of the mixed precursor which was synthesized by low heating solid state coordination method using lithium acetate, manganese acetate and oxalic acid as starting materials. The structures and morphologies of the LiMn₂O₄ nanorod were investigated as a function of annealing temperature and time. The results showed that all samples in different annealing temperatures and time have the same spinel structure. The higher the annealing temperature is, the more complete the crystal structure forms, and the larger the particle size is. In addition, the electrochemical properties of the LiMn₂O₄nanorod were studied in this paper.     

Structural relaxation of Zr<Subscript>41</Subscript>Ti<Subscript>14</Subscript>Cu<Subscript>12.5</Subscript>Ni<Subscript>10</Subscript>Be<Subscript>22.5</Subscript> bulk metallic glass under high pressure

Zr₄₁Ti₁₄Cu_12.5Ni₁₀Be_22.5 bulk metallic glass (BMG) is annealed at 573 K under 3 GPa and its structural relaxation is investigated by X-ray diffraction, ultrasonic study, compression as well as sliding wear measurements. It is found that after the ZrTiCuNiBe BMG sample was annealed under high pressure, the mechanical properties were improved. Moreover, theBMG with relaxed structure exhibits markedly different acoustic properties. These results are attributed to the fact that relaxation under high-pressure results in a microstructural transformation in the BMG.     

Investigation on structural characteristics of PVDF–AgCF<Subscript>3</Subscript>SO<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocomposite solid polymer electrolyte system

There has been an increasing interest towards the incorporation of nanosize ceramic fillers in polymer electrolytes. Solid polymer electrolytes based on polyvinylidene fluoride (PVDF), silver triflate (AgCF₃SO₃), and x wt% of aluminum oxide (Al₂O₃) nanopowders (where x = 1, 3, 5, and 10, respectively) have been prepared using solution casting technique. The structural characteristics of these thin film specimens were studied using Fourier transform infrared (FTIR) and X-ray diffraction (XRD) patterns at room temperature. The appearance of new absorption bands and gradual shifts observed in some characteristic peaks confirmed the complex formation between polyvinylidene fluoride and silver triflate. Furthermore, the addition of nanosized filler Al₂O₃ has also indicated the interaction of the filler with the polymer salt complex. The XRD patterns obtained for all these samples in the 2θ range 10° to 70° showed the amorphous nature of these samples. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, December 7–9, 2006.     

Hyperfine structure in EPR spectra of the catalytic system TiCl<Subscript>4</Subscript> + Al(i-C<Subscript>4</Subscript>H<Subscript>9</Subscript>)<Subscript>3</Subscript>

In an EPR study of the catalytic system TiCl₄ + Al(i-C₄H₉)₃ in toluene and isopentane in TiCl₄/oligopiperylene + Al(i-C₄H₉)₃ in toluene, we have observed a dependence of the linewidth of the hyperfine structure on the mobility of the complex in solution. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 2, pp. 174–177, March–April, 2007.     

Phase transition in Pd<Subscript>40</Subscript>Ni<Subscript>10</Subscript>Cu<Subscript>30</Subscript>P<Subscript>20</Subscript> bulk metallic glass under HP &; HT

The phase transitions in Pd₄₀Ni₁₀Cu₃₀P₂₀ bulk metallic glass (BMG) have been studied under high pressure and high temperature (HP & HT) by X-ray diffaction measurements with synchrotron radiation source. We found that the BMG underwent a phase transitions of amorphous-crystalline-amorphous at 10 GPa upon heating. The parallel experiments were carried out at 7 GPa, while we did not observe the amorphous-crystalline-amorphous transitions by increasing temperature. Quenching the melted BMG at 7 GPa, it was found that the phase crystallized from the melt differed from the primary phase crystallized from the starting amorphous solid upon heating suggesting there existed a distinct mechanism in two cases.     

Preparation of TiO<Subscript>2</Subscript>-coated LiCo<Subscript>1/3</Subscript>Ni<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> by electrostatic self-assembly method and its properties

A precursor of TiO₂–LiCo_1/3Ni_1/3Mn_1/3O₂ was prepared by electrostatic self-assembly method. The final product was obtained by heating the precursor at 400–450 °C for 4–6 h in air. X-ray diffraction (XRD), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), and electrochemical tests were used to examine the structural, morphology, elementary valence, and electrochemical characteristics. XRD indicated that the TiO₂-coated material can be indexed by α-NaFeO₂ layered structure, which belongs to hexagonal-type space group R3m. XPS results confirmed the existence of TiO₂ compound on the surface of the coated sample. The SEM image showed that the material had spherically porous morphology with the uniform size about 6 μm. The initial charge–discharge capacity of the TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ material was 168.8/160.0 mAh/g. After 60 cycles, the discharge capacity of the TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ sample was 147.0 mAh/g, and the coulombic efficiency was 94.0%. Compared with the uncoated sample, the electrochemical performance of TiO₂-coated LiCo_1/3Ni_1/3Mn_1/3O₂ was improved.     

Effect of isoelectronic impurities K<Superscript>+</Superscript> and I<Superscript>−</Superscript> on luminescence of CsBr:Eu<Superscript>2+</Superscript> crystals

We have investigated the photoluminescence (PL) and photostimulated luminescence (PSL) spectra at 300 K to study the effect of isoelectronic impurities K⁺ and I⁻ on the formation and energy structure of Eu²⁺-V_Cs isolated dipole centers and aggregate centers in the form of single crystals of CsEuBr₃ in CsBr:Eu²⁺ single crystals. We have shown that K⁺ and I⁻ impurities in a concentration of 5 mol% do not have a substantial effect on the energy spectrum of isolated dipole centers in CsBr:Eu²⁺ single crystals and the processes for the formation of such centers during growth of CsBr:Eu single crystals from the melt by the Bridgman method. We have established that in Cs_0.95K^0.05Br:Eu²⁺, more favorable conditions are realized for the formation of aggregate centers than in CsBr:Eu²⁺ and CsBr^0.95K^0.05Br:Eu²⁺ single crystals. So in order to improve the storage properties of phosphors based on CsBr:Eu²⁺, in particular for increasing the efficiency of PSL excitation, it is expedient to dope them with K⁺ impurity in a concentration up to 5 mol%. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 5, pp. 627–630, September–October, 2007.     

Influence of the sample orientation in Sn<Subscript>2</Subscript>P<Subscript>2</Subscript>S<Subscript>6</Subscript> crystals on the hydrostatic piezoelectric coefficients

The influence of the sample orientation on the effective value of the hydrostatic piezoelectric coefficients d _h ⁽ⁱ⁾ of Sn₂P₂S₆ crystals has been studied. The hydrostatic piezoelectric coefficients d _h ⁽¹⁾ and d′ _h ⁽³⁾ , were measured, d _h ⁽¹⁾ =(244±3) pC/N and d′ _h ⁽³⁾ =(92±1) pC/N. The hydrostatic piezoelectric coefficient d _h ⁽³⁾ for orthogonal axis system was calculated to be d _h ⁽³⁾ =(87±2) pC/N. The, optimal orientation of the sample has been found as (Xy l)−20°-cut. Maximal value of the effective hydrostatic piezoelectric coefficient d _h ⁽¹⁾ equals 260 pC/N. Double rotated samples were also studied. The orientation of the samples insensitive to the pressure has been found. The theoretical mean value of hydrostatic piezoelectric coefficient (d _h ) _mean corresponding to randomly oriented Sn₂P₂S₆ grains in a poled composite has been calculated to be (d _h ) _mean =136 pC/N.     

One-step synthesis of colloidal Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> and γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles at room temperature

A facile room-temperature synthesis has been developed to prepare colloidal Mn₃O₄ and γ-Fe₂O₃ nanoparticles (5 to 25 nm) by an ultrasonic-assisted method in the absence of any additional nucleation and surfactant. The morphology of the as-prepared samples was observed by transmission electron microscopy. High-resolution transmission electron microscopy observations revealed that the as-synthesized nanoparticles were single crystals. The magnetic properties of the samples were investigated with a superconducting quantum interference device magnetometer. The possible formation process has been proposed.     

Surface morphology of PrBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7-δ</Subscript> single crystals after the long-lasting high-temperature reduction

The results of the detailed scanning electron microscopy study of PrBa₂Cu₃O_7-δ single crystals after the long-lasting high-temperature post-growth treatment are reported. The presence of the unstable decomposition products on the crystal surface indicates that the onset of superconductivity must be related to the structural transformations in the bulk (approximately 20% of the total volume of the examined crystals). The time-dependent character of the superconductivity in the Pr-123 crystals could be attributed to the migration of defects in the Pr−Ba sublattice from the bulk toward the surface.     

Synthesis of ZnAl<Subscript>2</Subscript>O<Subscript>4</Subscript>/α-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> complex substrates and growth of GaN films

With the solid phase reaction between pulsed-laser-deposited (PLD) ZnO film and α-Al₂O₃ substrate, ZnAl₂O₄/α-Al₂O₃ complex substrates were synthesized. X-ray diffraction (XRD) spectra show that as the reaction proceeds, ZnAl₂O₄ changes from the initial (111)-oriented single crystal to poly-crystal, and then to inadequate (111) orientation. Corresponding scanning electron microscope (SEM) images indicate that the surface morphology of ZnAl₂O₄ transforms from uniform islands to stick structures, and then to bulgy-line structures. In addition, XRD spectra present that ZnAl₂O₄ prepared at low temperature is unstable at the environment of higher temperature. On the as-obtained ZnAl₂O₄/α-Al₂O₃ substrates, GaN films were grown without any nitride buffer using light-radiation heating low-pressure MOCVD (LRH-LP-MOCVD). XRD spectra indicate that GaN film on this kind of complex substrate changes fromc-axis single crystal to poly-crystal as ZnAl₂O₄ layer is thickened. For the single crystal GaN, its full width at half maximum (FWHM) of X-ray rocking curve is 0.4°. Results indicate that islands on thin ZnAl₂O₄ layer can promote nucleation at initial stage of GaN growth, which leads to the (0001)-oriented GaN film.     

衬底温度对PLD法生长的Mg0.05Zn0.95O薄膜结构和发光特性的影响

用脉冲激光沉积(PLD)法在不同温度的Si(111)衬底上成功制备了c轴择优取向的Mg_005Zn_095O薄膜.通过X射线衍射(XRD)和光致发光谱(PL)研究了衬底温度对Mg_005Zn_095O薄膜结构和发光特性的影响,探讨了薄膜的结晶质量与发光特性之间的关系.结果表明,在衬底温度为450℃时生长的Mg_005Zn_095O薄膜具有很好的c轴取向和较强的光致发光峰.室温下分别用激发波长为240,300和325nm的氙灯作为激发光源得到不同样品的PL谱,分析表明紫外发光峰和紫峰来源于自由激子的复合辐射且发光强度与薄膜的结晶质量密切相关,蓝绿发光峰与氧空位有关.此外,探讨了衬底温度影响紫外光致发光峰红移和蓝移的可能机理. 关键词： 005Zn_095O薄膜')" href="#">Mg_005Zn_095O薄膜 PLD 衬底温度 光致发光     

Inelastic neutron scattering and lattice dynamics of NaNbO<Subscript>3</Subscript> and Sr<Subscript>0.70</Subscript>Ca<Subscript>0.30</Subscript>TiO<Subscript>3</Subscript>

NaNbO₃ and (Sr,Ca)TiO₃ exhibit an unusual complex sequence of temperature- and pressure-driven structural phase transitions. We have carried out lattice dynamical studies to understand the phonon modes responsible for these phase transitions. Inelastic neutron scattering measurements using powder samples were carried out at the Dhruva reactor, which provide the phonon density of states. Lattice dynamical models have been developed for SrTiO₃ and CaTiO₃ which have been fruitfully employed to study the phonon spectra and vibrational properties of the solid solution (Sr,Ca)TiO₃.      

Microstructures, surface bonding states and room temperature ferromagnetisms of Zn0.95Co0.05O thin films doped with copper

Zn_0.95−xCo_0.05Cu_xO (ZCCO, where x = 0, 0.005, 0.01 and 0.015) thin films were deposited on Si (1 0 0) substrates by pulsed laser deposition technique. Crystal structures, surface morphologies, chemical compositions, bonding states and chemical valences of the corresponding elements for ZCCO films were characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and X-ray photoelectron spectroscopy (XPS). XRD and FESEM results indicate that crystallite sizes of the highly (0 0 2)-oriented ZCCO films slightly decrease with increasing Cu content. When the Cu content increases from 0 to 0.015, Zn 2p_3/2, Co 2p, Cu 2p_3/2 and O 1s peaks of the ZCCO film shift towards higher or lower binding energy regions, and the reasons for these chemical shifts are investigated by fitting the corresponding XPS narrow-scan spectra. Both in-plane and out-of-plane magnetization-magnetic field hysteresis loops of the ZCCO films reveal that all the films have room temperature ferromagnetisms (RTFMs). The conceivable origin of the RTFM is ascribed to the combined effects of the local structural disorder resulted from (Co²⁺, Cu²⁺, Cu¹⁺)-cations which substitute Zn²⁺ ions in the ZnO matrices, ferromagnetic coupling between coupled dopant atoms caused by Co²⁺ (3d⁷4s⁰) and Cu²⁺ (3d⁹4s⁰) spin states, and exchange interactions between the unpaired electron spins originating from lattice defects induced by Cu doping in the Zn_0.95Co_0.05O matrices.     

Thermophysical study of structural phase transitions in Na<Subscript>0.95</Subscript>Li<Subscript>0.05</Subscript>NbO<Subscript>3</Subscript> solid solution

Temperature dependences of specific heat C_p(T) and coefficient of thermal expansion ;(T) for Na_0.95Li_0.05NbO₃ sodium-lithium niobate ceramic samples are investigated in the temperature range of 100–800 K. The C_p(T) and α(T) anomalies at T₃ = 310 ± 3 K, T₂ = 630 ± 8 K, and T₁ = 710 ± 10 K are observed, which correspond to the sequence of phase transitions N ? Q ? S(R) ? T2(S). The effect of heat treatment of the samples on the sequence of structural distortions was established. It is demonstrated that annealing of the samples at 603 K leads to splitting of the anomaly corresponding to the phase transition Q → R/S in two anomalies. After sample heating to 800 K, the only anomaly is observed in both the C_p(T) and ;(T) dependence. Possible mechanisms of the observed phenomena are discussed.     

Study of structural phase transitions in YBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>6+δ</Subscript> by x-ray photoelectron spectroscopy

We have used x-ray photoelectron spectroscopy to investigate the charge state of oxygen found in the basal structural plane of YBa₂Cu₃O₆+γ.. We have observed a change in this state after thermal treatment, with a transition to the adjacent structural phase region. We have shown that changes in the charge state of oxygen can be used as an indicator of structural changes occurring in YBa₂Cu₃O₆+δ.. We have found that the rate of structural relaxation yttrium barium cuprate depends on the amount of structural water it contains. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 2, pp. 195–198, March–April, 2007.