Kinetics and mechanism of oxidation of hydroxylamine by tetrachloroaurate(III) ion

The oxidation of H₂NOH is first-order both in [NH₃OH⁺] and [AuCl₄ ^–]. The rate is increased by the increase in [Cl^–] and decreased with increase in [H⁺]. The stoichiometry ratio, [NH₃OH⁺]/[AuCl₄ ^–], is 1. The mechanism consists of the following reactions.

Kinetics and Mechanism of the Reduction of Enneamolybdonickelate(IV) by Arsenite

The kinetics and mechanism of the reduction of enneamolybdonickelate(IV) by arsenite in aqueous acid solution was studied by spectrophotometry. The reaction rate increases with increasing concentrations of H⁺ and with temperature. The associated rate law is: . The rate constants and activation parameters of the rate-determining step were evaluated. A mechanism related to this reaction was proposed.     

Solubility of Rhodochrosite (MnCO3) in NaCl Solutions

The solubility of rhodochrosite (MnCO₃) at 25°C under constant carbon dioxide partial pressure p(CO₂) was determined in NaCl solutions as a function of ionic strength I. The dissolution of MnCO₃(s) for the reaction

Mechanism of the catalyzed by cysteine electroreduction of the insoluble in water cobalt(II) salt as a component of carbon paste electrode

The mechanism of the Co(II) catalytic electroreduction of water insoluble CoR₂ salt in the presence of cysteine was developed. CoR₂ = cobalt(II) cyclohexylbutyrate is the component of a carbon paste electrode. Electrode surface consecutive reactions are: (a) fast (equilibrium) reaction of the complex formation, (b) rate-determining reversible reaction of the promoting process of CoR(Ac⁺) complex formation, (c) rate-determining irreversible reaction of the electroactive complex formation with ligand-induced adsorption, and (d) fast irreversible reaction of the electroreduction. Reactions (a,b) connected with CoR₂ dissolution and reactions (c,d) connected with CoR₂ electroreduction are catalyzed by . Regeneration of (reactions “b,d”) and accumulation of atomic Co(0) (reaction “d”) take place. Experimental data [Sugawara et al., Bioelectrochem Bioenergetics 26:469, 1991]: i _a vs E (i _a is anodic peak, E is cathodic accumulation potential), i _a vs , and i _a vs pH have been quantitatively explained.     

Solubility of Oxygen in Some 1-1, 2-1, 1-2, and 2-2 Electrolytes as a Function of Concentration at 25°C

The solubility of oxygen has been measured in a number of electrolytes [(LiCl, KCl, RbCl, CsCl, NaF, NaBr, NaI, NaNO₃, KBr, KI, KNO₃, CaCl₂, SrCl₂, BaCl₂, Li₂SO₄, K₂SO₄, Mn(NO₃)₃)] as a function of concentration at 25°C. The solubilities, mol (kg-H₂O)^–1, have been fitted to a function of the molality m (standard deviation < 3mol-kg^–1)

Kinetics and mechanism of oxidation of the chromium(III)-DL-aspartic acid complex/periodate reaction. Evidence for iron(II) catalysis

The kinetics of oxidation of the chromium(III)-DL- aspartic acid complex, [CrIIIHL]+ by periodate have been investigated in aqueous medium. In the presence of Fe^II as a catalyst, the following rate law is obeyed:

System Zn–Rh–O: heat capacity and Gibbs free energy of formation using differential scanning calorimeter and electrochemical cell

The standard molar Gibbs free energy of formation of ZnRh₂O₄(s) has been determined using an oxide solid-state electrochemical cell wherein calcia-stabilized zirconia (CSZ) was used as an electrolyte. The oxide cell can be represented by: . The electromotive force was measured in the temperature range from 943.9 to 1,114.2 K. The standard molar Gibbs energy of formation of ZnRh₂O₄(s) from elements in their standard state using the oxide electrochemical cell has been calculated and can be represented by: . Standard molar heat capacity C ^o _p,m(T) of ZnRh₂O₄(s) was measured using a heat flux-type differential scanning calorimeter in two different temperature ranges, from 127 to 299 and 307 to 845 K. The heat capacity in the higher temperature range was fitted into a polynomial expression and can be represented by: . The heat capacity of ZnRh₂O₄(s), was used along with the data obtained from the oxide electrochemical cell to calculate the standard enthalpy and entropy of formation of the compound at 298.15 K.     

Thermodynamic studies on Pr2TeO6

The standard Gibbs energy of formation of Pr₂TeO₆ $ (\Updelta_{\text{f}} G^{^\circ } \left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} ,\;{\text{s}}} \right)) $ was derived from its vapour pressure in the temperature range of 1,400–1,480 K. The vapour pressure of TeO₂ (g) was measured by employing a thermogravimetry-based transpiration method. The temperature dependence of the vapour pressure of TeO₂ over the mixture Pr₂TeO₆ (s) + Pr₂O₃ (s) generated by the incongruent vapourization reaction, Pr₂TeO₆ (s) = Pr₂O₃ (s) + TeO₂ (g) + ½ O₂ (g) could be represented as: $ { \log }\left\{ {{{p\left( {{\text{TeO}}_{ 2} ,\;{\text{g}}} \right)} \mathord{\left/ {\vphantom {{p\left( {{\text{TeO}}_{ 2} ,\;{\text{g}}} \right)} {{\text{Pa}} \pm 0.0 4}}} \right. \kern-0em} {{\text{Pa}} \pm 0.0 4}}} \right\} = 19. 12- 27132\; \left({\rm{{{\text{K}}}}/T} \right) $ . The $ \Updelta_{\text{f}} G^{^\circ } \;\left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} } \right) $ could be represented by the relation $ \left\{ {{{\Updelta_{\text{f}} G^{^\circ } \left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} ,\;{\text{s}}} \right)} \mathord{\left/ {\vphantom {{\Updelta_{\text{f}} G^{^\circ } \left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} ,\;{\text{s}}} \right)} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}}} \right. \kern-0em} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}} \pm 5.0} \right\} = - 2 4 1 5. 1+ 0. 5 7 9 3\;\left(T/{\text{K}}\right) .$ Enthalpy increments of Pr₂TeO₆ were measured by drop calorimetry in the temperature range of 573–1,273 K and heat capacity, entropy and Gibbs energy functions were derived. The $ \Updelta_{\text{f}} H_{{298\;{\text{K}}}}^{^\circ } \;\left( {{ \Pr }_{ 2} {\text{TeO}}_{ 6} } \right) $ was found to be $ {{ - 2, 40 7. 8 \pm 2.0} \mathord{\left/ {\vphantom {{ - 2, 40 7. 8 \pm 2.0} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}}} \right. \kern-0em} {\left( {{\text{kJ}}\,{\text{mol}}^{ - 1} } \right)}} $ .     

Kinetics and mechanism of osmium(VIII)-catalyzed oxidation of hypophosphite by hexacyanoferrate(III) in aqueous alkali

The kinetics of osmium(VIII)-catalyzed oxidation of hypophosphite with hexacyanoferrate(III) in alkaline medium has been studied. The rate is independent of the concentration of the oxidant. The order with respect to hydroxide ion is variable. Rate law (1) conforms with the experimental observations.

Configuration and conformation of substituted 1,3,2-dioxaarsenanes

The configuration and conformations often 2-, 4-, and 5-substituted 1,3,2-dioxaarsenanes were studied from their PMR spectra. Inversion of the shielding constants of protons in the 4, 6, and 5 positions and of methyl groups in the 5 position was established, and the axial orientation of the As-Cl and As-OR bonds, the equatorial orientation of the 4-CH₃ group, and the chair conformation of the six-membered heteroring were proved. The anisotropies of the diamagnetic susceptibility were estimated for the first time: and (dipole approximation); and (nondipole approximation). The cyclic torsion angle (= 58°) as found for 2-chloro-1,3,2-dioxaarsenane by the R-factor method. Conclusions regardiwng the conformation of the ring and substituents were confirmed by a study of the specific effect of an aromatic solvent on the position of the resonance lines.Communication I from the series Investigation of the Stereochemistry of Organic Arsenic Compounds by NMR Spectroscopy.Deceased.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 4, pp. 457–463, April, 1973.     

Improvement of the electrochemical properties of “as-grown” boron-doped polycrystalline diamond electrodes deposited on tungsten wires using ethanol

The electrochemical properties of boron-doped diamond (BDD) polycrystalline films grown on tungsten wire substrates using ethanol as a precursor are described. The results obtained show that the use of ethanol improves the electrochemistry properties of “as-grown” BDD, as it minimizes the graphitic phase upon the surface of BDD, during the growth process. The BDD electrodes were characterized by Raman spectroscopy, scanning electronic microscopy, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The boron-doping levels of the films were estimated to be ∼10²⁰ B/cm³. The electrochemical behavior was evaluated using the and redox couples and dopamine. Apparent heterogeneous electro-transfer rate constants were determined for these redox systems using the CV and EIS techniques. values in the range of 0.01–0.1 cm s⁻¹ were observed for the and redox couples, while in the special case of dopamine, a lower value of 10⁻⁵ cm s⁻¹ was found. The obtained results showed that the use of CH₃CH₂OH (ethanol) as a carbon source constitutes a promising alternative for manufacturing BDD electrodes for electroanalytical applications.     

Investigations of the distribution of elements in phases present in G-AlMg5Si cast alloy with EDX/WDX spectrometers and AES

Summary The mechanical properties of the most aluminium alloys depend strongly on their chemical composition, casting methods and the heat treatment. Alloys of the type G-AlMg₅Si are known for good corrosion resistance and mechanical properties at elevated temperatures. Under the trade mark Hydronalium (Hy 511) they are used for the production of cylinder heads for air-cooled Diesel engines. To obtain better chemical characteristics, titanium is added to the alloy. This paper deals with the results obtained during investigations about the distribution of elements in the binary eutectic Mg₂Si and the ternary eutectic as well as with the distribution of titanium in samples of Hy 511, obtained during casting of cylinder heads. Studies of the distribution of the elements were performed using EDX/WDX spectrometers, and the distribution of titanium was studied also with Auger electron spectroscopy.     

The Second Dissociation Constant of Carbonic Acid in Ethanol–Water Mixtures from 5 to 45°C

The determination of the second dissociation constant of carbonic acid K ₂ in 5, 15, and 25 mass% ethanol—water mixed solvents has been made using cell of the type:

Mixed-Valence 24-Vanadophosphate Decorated with Six RuII(dmso)3 Groups: [{RuII3(dmso)9PVV11VIVRuIIIO37(OH)3}2]8?

The mixed-valence 24-vanadophosphate (1) has been synthesized and characterized in the solid state by IR, magnetism, EPR, XPS, and elemental analysis. Single-crystal X-ray analysis was carried out on (Na-1), which crystallizes in the triclinic system, space group , with a = 17.168(3) ?, b = 18.1971(14) ?, c = 20.1422(13) ?, α = 114.753(3)°, β = 99.390(4)°, γ = 95.124(4)°, and Z = 2. Polyanion 1 has an unusual, open structure composed of 2 Ru^IIIO₆ octahedra, 2 V^IVO₆ octahedra, 14 V^VO₅ square-pyramids, 8 V^VO₄ tetrahedra, and 2 PO₄ tetrahedra which are all directly linked via edges and corners. The outer surface of 1 is decorated with six Ru^II(dmso)₃ groups. XPS studies on Na-1 confirm the presence of 2 Ru^III and 6 Ru^II as well as 22 V^V and 2 V^IV centers. Magnetic susceptibility data on Na-1 show that the V^IV–Ru^III pairs are coupled antiferromagnetically, with J ₁ = −13 K and J ₂ ∼ −3 K. We did not detect any peak in our EPR measurements on Na-1, thus supporting the conclusion that Na-1 is diamagnetic in its ground state. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users. In Memoriam Prof. F. A. Cotton     

On the charge storage mechanism at RuO<Subscript>2</Subscript>/0.5 M H<Subscript>2</Subscript>SO<Subscript>4</Subscript> interface

Comparative study of capacitative properties of RuO₂/0.5 M H₂SO₄ and Ru/0.5 M H₂SO₄ interfaces has been performed with a view to find out the nature of electrochemical processes involved in the charge storage mechanism of ruthenium (IV) oxide. The methods of cyclic voltammetry and scanning electron microscopy (SEM) were employed for the investigation of electrochemical behavior and surface morphology of RuO₂ electrodes. It has been suggested that supercapacitor behavior of RuO₂ phase in the potential E range between 0.4 and 1.4 V vs reference hydrogen electrode (RHE) should be attributed to double-layer-type capacitance, related to non-faradaic highly reversible process of ionic pair formation and annihilation at RuO₂/electrolyte interface as described by following summary equation:

Thermodynamics of Solutions of Trimethyl Aluminum and Trimethyl Gallium with Tetramethyl Tin

The enthalpies and entropies of evaporation of Al(CH₃)₃–Sn(CH₃)₄and Ga(CH₃)₃–Sn(CH₃)₄solutions were determined. It was established that solvates are formed in these systems and that the dissociation energies of specific interactions in them change in the following order: (10.3) > > > (4.08 kJ mol^–1), (6.52) > (5.14) > > (4.08 kJ mol^–1).     

Photoelectrode characteristics of an organic bilayer in water phase containing a redox molecule

We have recently reported that the organic bilayer of 3,4,9,10-perylenetetracarboxyl-bisbenzimidazole (PTCBI, n-type semiconductor) and 29H,31H-phthalocyanine (H₂Pc, p-type semiconductor), which is a part of a photovoltaic cell, acts as a photoanode in the water phase (Abe et al., ChemPhysChem 5:716, [2004]); in that case, the generation of the photocurrent involving an irreversible thiol oxidation at the H₂Pc/water interface took place to be coupled with hole conduction through the H₂Pc layer, based on the photophysical character of the bilayer. In the present work, the photoelectrode characteristics of the bilayer were investigated in the water phase containing a redox molecule , where the photo-induced oxidation and reduction for the couple were found to take place at the bilayer. The photoanodic current involving the oxidation efficiently occurred at the interface of H₂Pc/water, similar to the previous example. In the view of the voltammograms obtained, it was noted that there are pin-holes in the H₂Pc layer of the bilayer, leading to a cathodic reaction with at the PTCBI surface especially in the dark; that is, the band bending at the PTCBI/water interface can essentially be reduced by applying a negative potential [e.g., < ∼ 0 V (vs Ag/AgCl)] to the PTCBI, when the cathodic reaction may take place through the conduction band of the PTCBI. Moreover, under that applied potential condition of irradiation, the photogenerated electron carrier part can move to the PTCBI surface, thus enhancing the reduction of .     

Nonlinear magneto-optical effects and photomagnetism of electrochemically synthesized molecule-based magnets

This article describes novel optical functionalities such as photomagnetic effects and magnetization-induced second harmonic generation (MSHG) in several cyano-bridged metal assemblies. Single crystal- and film-types of a cyano-bridged Cu–Mo bimetallic assembly, , were electrochemically prepared. When this compound was irradiated with light, spontaneous magnetization with a Curie temperature (T _C) of 23 K was observed. Electrochemically prepared Fe^II[Cr^III(CN)₆]_2/3·5H₂O thin film, which was a ferromagnet with T _C=21 K, showed photoreduced magnetization. This photomagnetism is due to the change of ferromagnetic coupling between Fe^II and Cr^III. MSHG was observed in Cs^ICo^II[Cr^III(CN)₆]·0.5H₂O. This -type Prussian blue analog-based magnet is proven to be a piezoelectric ferromagnet, i.e., condensed matter with both piezoelectric and ferromagnetism. This MSHG is due to the coupling between a piezoelectric structure of and ferromagnetism with a T _C of 46 K.

Inner-sphere oxidation of a ternary dipicolinatochromium(III) complex involving a malonic acid co-ligand

The oxidation of a ternary complex of chromium(III), [Cr^III(DPA)(Mal)(H₂O)₂]^?, involving dipicolinic acid (DPA) as primary ligand and malonic acid (Mal) as co-ligand, was investigated in aqueous acidic medium. The periodate oxidation kinetics of [Cr^III(DPA)(Mal)(H₂O)₂]^? to give Cr(VI) under pseudo-first-order conditions were studied at various pH, ionic strength and temperature values. The kinetic equation was found to be as follows: \( {\text{Rate}} = {{\left[ {{\text{IO}}_{4}^{ - } } \right]\left[ {{\text{Cr}}^{\text{III}} } \right]_{\text{T}} \left( {{{k_{5} K_{5} + k_{6} K_{4} K_{6} } \mathord{\left/ {\vphantom {{k_{5} K_{5} + k_{6} K_{4} K_{6} } {\left[ {{\text{H}}^{ + } } \right]}}} \right. \kern-0pt} {\left[ {{\text{H}}^{ + } } \right]}}} \right)} \mathord{\left/ {\vphantom {{\left[ {{\text{IO}}_{4}^{ - } } \right]\left[ {{\text{Cr}}^{\text{III}} } \right]_{\text{T}} \left( {{{k_{5} K_{5} + k_{6} K_{4} K_{6} } \mathord{\left/ {\vphantom {{k_{5} K_{5} + k_{6} K_{4} K_{6} } {\left[ {{\text{H}}^{ + } } \right]}}} \right. \kern-0pt} {\left[ {{\text{H}}^{ + } } \right]}}} \right)} {\left\{ {\left( {\left[ {{\text{H}}^{ + } } \right] + K_{4} } \right) + \left( {K_{5} \left[ {{\text{H}}^{ + } } \right] + K_{6} K_{4} } \right)\left[ {{\text{IO}}_{4}^{ - } } \right]} \right\}}}} \right. \kern-0pt} {\left\{ {\left( {\left[ {{\text{H}}^{ + } } \right] + K_{4} } \right) + \left( {K_{5} \left[ {{\text{H}}^{ + } } \right] + K_{6} K_{4} } \right)\left[ {{\text{IO}}_{4}^{ - } } \right]} \right\}}} \) where k ₆ (3.65 × 10^?3 s^?1) represents the electron transfer reaction rate constant and K ₄ (4.60 × 10^?4 mol dm^?3) represents the dissociation constant for the reaction \( \left[ {{\text{Cr}}^{\text{III}} \left( {\text{DPA}} \right)\left( {\text{Mal}} \right)\left( {{\text{H}}_{2} {\text{O}}} \right)_{2} } \right]^{ - } \rightleftharpoons \left[ {{\text{Cr}}^{\text{III}} \left( {\text{DPA}} \right)\left( {\text{Mal}} \right)\left( {{\text{H}}_{2} {\text{O}}} \right)\left( {\text{OH}} \right)} \right]^{2 - } + {\text{H}}^{ + } \) and K ₅ (1.87 mol^?1 dm³) and K ₆ (22.83 mol^?1 dm³) represent the pre-equilibrium formation constants at 30 °C and I = 0.2 mol dm^?3. Hexadecyltrimethylammonium bromide (CTAB) was found to enhance the reaction rate, whereas sodium dodecyl sulfate (SDS) had no effect. The thermodynamic activation parameters were estimated, and the oxidation is proposed to proceed via an inner-sphere mechanism involving the coordination of IO₄ ^? to Cr(III).     

Molecular Structure and Conformation of p-Bis(trimethylsilyl)benzene: A Study by Gas-Phase Electron Diffraction and Theoretical Calculations

The molecular structure and conformation of p-bis(trimethylsilyl)benzene have been investigated by gas-phase electron diffraction, ab initio MO calculations at the HF/6-31G*, MP2(f.c.)/6-31G*, and B3LYP/6-31G* levels, and MM3 molecular mechanics calculations. The calculations indicate the syn- and anti-coplanar conformations, with two bonds in the plane of the benzene ring, to be energy minima. The perpendicular conformations, with two bonds in a plane orthogonal to the ring plane, are transition states. The two coplanar conformers have nearly the same energy with a low interconversion barrier, 0.3–0.5 kJ mol^–1. The calculated lengths of the and bonds differ by only a few thousandths of an angstrom, in agreement with electron diffraction results from molecules containing either or bonds. The geometrical distortion of the benzene ring in p-bis(trimethylsilyl)-benzene may be described by superimposing independent distortions from each of the two SiMe₃ groups. The electron diffraction intensities from a previous study (Rozsondai, B.; Zelei, B.; Hargittai, I. J. Mol. Struct. 1982, 95, 187) have been reanalyzed, imposing constraints from the theoretical calculations, and using a model based on a 1:1 mixture of the two coplanar conformers. The effective torsion angles of the SiMe₃ groups may indicate nearly free rotation. Important geometrical parameters from the present electron diffraction analysis are , and . While the mean bond lengths are virtually the same from the previous and present analyses, the new ipso angle is in better agreement with the MO calculations [HF, 116.9° MP2(f.c.), 117.1° B3LYP, 116.9°].