自由群的直积的检验元素的注记

本文研究了自由群的直积的检验元素,通过对直积的自同态的分解,得到了直积中的元素为检验元素的充分必要条件,改进了O'neill和Turner的结果.此外,构造了两类具体的检验元素.     

乘方的指数与其幂的位数的关系

为了探究乘方的指数与其幂的位数的关系,定义了几个有关的新概念,并且证明了两个关于乘方以及进制进位的定理,由此建立起关于乘方以及进制进位的理论体系,其中包括进位理论中判定乘方的指数与其幂的位数是否存在周期规律的判别法,以及进位规律的求解法和四条相关的性质.     

Lindelf的工作与Chaplygin的工作的互补性

运用Vakonomic模型导出Lindel f方程 ,表明Lindel f的工作与Vakonomic模型相吻合 ;运用Chetaev模型导出Chaplygin方程 ,表明Chaplygin的工作与Chetaev模型相吻合·　在此基础上 ,通过改进Chaplygin方程和Lindel f方程的表示形式 ,实现了从Lindel f方程向Chaplygin方程的合理过渡和从Chaplygin方程向Lindel f方程的合理的过渡·　最后 ,给出一个典型实例·　结果表明 ,正如Vako nomic模型与Chetaev模型是互补的一样 ,Lindel f的工作与Chaplygin的工作也是互补的·     

一元二次方程根的判别式的应用

<正>一元二次方程根的判别式是初中数学的重要内容,本文以近年中考中所考查的题型为例,归纳整理如下,供同仁们参考.一、求待定字母的取值范围(1)已知方程根的情况,求待定字母的取值范围例1若关于x的方程(k-1)x2+2(k)^(1/2)x+1=0有两个不相等的实数根.求k的獉獉取值范围.析解由题意"方程有两个不相等的实数獉獉根"可知:该方程是一元二次方程,且Δ>0,即     

树的最大特征值的上界的一个注记

设T是一个树,V是T的顶点集．记dv是υ∈V的度,△是T的最大顶点度．设υ∈V且dw=1．记k=ew+1,这里ew是w的excentricity．设δj′= max{dυ:dist(υ,w)=j},j=1,2,…,k-2,我们证明和这里μ1(T)和λ1(T)分别是T的Laplacian矩阵和邻接矩阵的最大特征值．特别地,记δo′=2．     

函数的商的不定积分

本文给出了函数的商的不定积分公式,揭示了该公式的应用方法.     

计算Hamilton矩阵特征值的一个稳定的有效的保结构的算法

提出了一个稳定的有效的保结构的计算Hamilton矩阵特征值和特征不变子空间的算法,该算法是由SR算法改进变形而得到的。在该算法中,提出了两个策略,一个叫做消失稳策略,另一个称为预处理技术。在消失稳策略中,通过求解减比方程和回溯彻底克服了Bunser Gerstner和Mehrmann提出的SR算法的严重失稳和中断现象的发生,两种策略的实施的代价都非常低。数值算例展示了该算法比其它求解Hamilton矩阵特征问题的算法更有效和可靠。     

有趣的圆的膨胀和收缩

向平静的湖面投入一颗石子,形成水波纹,这水波纹构成以投入点为圆心的一族同心圆,给我们以点膨胀为圆的最好形象.反之如图1,⊙O的半径OA=r,让⊙O的半径逐渐缩小,形成一族同心圆,当⊙O的半径r趋近于零时,⊙O收缩为一点O,因此,把点看成半径长为零的圆.     

抛物线上的点列构成的多边形的面积问题

引理设Pn,Pn＋d,Pn＋2d,…,Pn＋（k-1）d是抛物线y=ax^2＋vx＋c（a,b,c为常数,a≠0）上的点列（注：本文用只表示函数图象上横坐标为t的点）,则k边形Pn＋dPn＋2d…Pn＋（k-1）d的面积S与n无关（即与点列的起始位置无关）,     

含有共轭三键的高聚物的掺杂机制的探讨

本文从实验事实出发,对含有共轭三键的共轭高聚物——聚丁二炔的掺杂及电导的特点进行了详细的分析;对聚丁二炔晶体掺杂的机制进行了初步的探讨;从结构相变的角度出发,提出了一个掺杂模型,并从能量的角度估算了由于掺杂引起链段结构改变所需的能量,较好地解释了聚丁二炔晶体掺杂未取得成功的原因.     

拟阵Q6与W4可F-线性表示的构造

对拟阵Q6与W4可F-线性表示的构造进行了研究.用E(G)在R上的链群F0(G,R)表示G的圈拟阵M(G);用松弛拟阵M的极小圈超平面X的方法得到拟阵M'.得到主要结果为:(i)用链群表示了M(K4),M(W4);(ii)用松弛极小圈超平面的方法从M(K4)构造了Q6,从M(W4)构造了W4,找出了W4可线性表示的所有...     

“运价”为负的运输模型计算机求解问题的处理

为解决一些计算机软件求解"运价"既有正值又有负值运输模型时"不可求解"的问题,本文采用"运价同额增减法"决策模型转换的方法,将原模型的"运价"全部转换为正值后再用计算机软件求解,并分别编写了EXCEL求解模板和求解程序对该方法的计算加以印证。结果表明,采用该方法求解得出的最优解(最优决策方案)与原模型求得的最优解完全一样,而最优值(最优决策效果)减去虚增(或加上虚减)的部分就是原模型的最优值。采用这种方法能成功地解决一些计算机软件"不可求解"的问题。     

Existence and Regularity for Dynamic Viscoelastic Adhesive Contact with Damage

A model for the dynamic process of frictionless adhesive contact between a viscoelastic body and a reactive foundation, which takes into account the damage of the material resulting from tension or compression, is presented. Contact is described by the normal compliance condition. Material damage is modelled by the damage field, which measures the pointwise fractional decrease in the load-carrying capacity of the material, and its evolution is described by a differential inclusion. The model allows for different damage rates caused by tension or compression. The adhesion is modelled by the bonding field, which measures the fraction of active bonds on the contact surface. The existence of the unique weak solution is established using the theory of set-valued pseudomonotone operators introduced by Kuttler and Shillor (1999). Additional regularity of the solution is obtained when the problem data is more regular and satisfies appropriate compatibility conditions.     

Numerical method of mixed finite volume-modified upwind fractional step difference for three-dimensional semiconductor device transient behavior problems

Transient behavior of three-dimensional semiconductor device with heat conduction is described by a coupled mathematical system of four quasi-linear partial differential equations with initial-boundary value conditions. The electric potential is defined by an elliptic equation and it appears in the following three equations via the electric field intensity. The electron concentration and the hole concentration are determined by convection-dominated diffusion equations and the temperature is interpreted by a heat conduction equation. A mixed finite volume element approximation, keeping physical conservation law, is used to get numerical values of the electric potential and the accuracy is improved one order. Two concentrations and the heat conduction are computed by a fractional step method combined with second-order upwind differences. This method can overcome numerical oscillation, dispersion and decreases computational complexity. Then a three-dimensional problem is solved by computing three successive one-dimensional problems where the method of speedup is used and the computational work is greatly shortened. An optimal second-order error estimate in L² norm is derived by using prior estimate theory and other special techniques of partial differential equations. This type of mass-conservative parallel method is important and is most valuable in numerical analysis and application of semiconductor device.     

Regularisierung schlecht gestellter Probleme durch Projektionsverfahren

Summary The numerical solution of ill-posed problems by projection methods is considered. Regularization is carried out simply by choosing an optimal discretization parameter. It is shown by asymptotic estimates and by numerical examples that this kind of regularization is as efficient as the method of Tikhonov and Phillips.

     

Weber problems with mixed distances and regional demand

We consider a location problem where the distribution of the existing facilities is described by a probability distribution and the transportation cost is given by a combination of transportation cost in a network and continuous distance. The motivation is that in many cases transportation cost is partly given by the cost of travel in a transportation network whereas the access to the network and the travel from the exit of the network to the new facility is given by a continuous distance.      

Automation and group structures in certain economic adjustment mechanisms

It is shown that the economic adjustment mechanism developed by Hurwicz and his associates has the structure of automata. It is then shown that certain price adjustment mechanisms, having an acceptability condition, impose a group structure upon the automaton. This condition is a bilinear invariance implied by a budget constraint. Then the automaton is defined by a subgroup, depending on agents' tastes, technologies and strategies, and by the representations of the subgroup imposed by the automaton.     

Completeness theorem for topological class models

A topological class logic is an infinitary logic formed by combining a first-order logic with the quantifier symbols O and C. The meaning of a formula closed by quantifier O is that the set defined by the formula is open. Similarly, a formula closed by quantifier C means that the set is closed. The corresponding models are a topological class spaces introduced by Ćirić and Mijajlović (Math Bakanica 1990). The completeness theorem is proved. This research was supported by the Ministry of Science, Technology and Development, Republic of Serbia, through Mathematical Institute, under grant 144013.     

货运列车的编组调度问题的研究

对于货运列车的编组调度问题,建立了以压缩中时和增加运量为双目标、多约束的0-1规划模型,采用逐步紧缩中时约束的方法得到了问题一的调度方案.在此基础上对装载特别物资的车辆施加更强的中时约束得到了问题二的调度方案.提出了列车匹配系数的概念并建立了列车最优配对原则,根据该原则对列车进行优化编组得到了问题三的调度方案.基于问题二的数据转换处理得到了问题四的调度方案.     

Mixed Method for Compressible Miscible Displacement with Dispersion in Porous Media

Compressible miscible displacement of one fluid by another in porous media is modelled by a nonlinear parabolic system. A finite element procedure is introduced to approximate the concentration of one fluid and the pressure of the mixture. The concentration is treated by a Galerkin method while the pressure is treated by a parabolic mixed finite element method. The effect of dispersion, which is neglected in [1], is considered. Optimal order estimates in L2 are derived for the errors in the approximate solutions.