Junction barrier Schottky rectifier with an improved P-well region

<正>A junction barrier Schottky（JBS） rectifier with an improved P-well on 4H-SiC is proposed to improve the V_F-I_R trade-off and the breakdown voltage.The reverse current density of the proposed JBS rectifier at 300 K and 800 V is about 3.3×10^-8 times that of the common JBS rectifier at no expense of the forward voltage drop.This is because the depletion layer thickness in the P-well region at the same reverse voltage is larger than in the P⁺ grid,resulting in a lower spreading current and tunneling current.As a result,the breakdown voltage of the proposed JBS rectifier is over 1.6 kV,that is about 0.8 times more than that of the common JBS rectifier due to the uniform electric field.Although the series resistance of the proposed JBS rectifier is a little larger than that of the common JBS rectifier,the figure of merit（FOM） of the proposed JBS rectifier is about 2.9 times that of the common JBS rectifier.Based on simulating the values of susceptibility of the two JBS rectifiers to electrostatic discharge（ESD） in the human body model（HBM） circuits,the failure energy of the proposed JBS rectifier increases 17%compared with that of the common JBS rectifier.     

Study of 4H-SiC junction barrier Schottky diode using field guard ring termination

This paper reports that the 4H-SiC Schottky barrier diode, PiN diode and junction barrier Schottky diode terminated by field guard rings are designed, fabricated and characterised. The measurements for forward and reverse characteristics have been done, and by comparison with each other, it shows that junction barrier Schottky diode has a lower reverse current density than that of the Schottky barrier diode and a higher forward drop than that of the PiN diode. High-temperature annealing is presented in this paper as well to figure out an optimised processing. The barrier height of 0.79 eV is formed with Ti in this work, the forward drop for the Schottky diode is 2.1 V, with an ideality factor of 3.2, and junction barrier Schottky diode with blocking voltage higher than 400 V was achieved by using field guard ring termination.     

New GaN Schottky barrier diode employing a trench on AlGaN/GaN heterostructure

A new GaN Schottky barrier diode employing a trench structure, which is proposed and fabricated, successfully decreases a forward voltage drop without sacrificing any other electric characteristics. The trench is located in the middle of Schottky contact during a mesa etch. The Schottky metal of Pt/Mo/Ti/Au is e-gun evaporated on the 300 nm-deep trench as well as the surface of the proposed GaN Schottky barrier diode. The trench forms the vertical Au Schottky contact and lateral Pt Schottky contact due to the evaporation sequence of Schottky metal. The forward voltage drops of the proposed diode and conventional one are 0.73 V and 1.25 V respectively because the metal work function (5.15 eV) of the vertical Au Schottky contact is considerably less than that of the lateral Pt Schottky contact (5.65 eV). The proposed diode exhibits the low on-resistance of 1.58 mΩ cm² while the conventional one exhibits 8.20 mΩ cm² due to the decrease of a forward voltage drop.     

The barrier-height inhomogeneity in identically prepared Ni/n-type 6H-SiC Schottky diodes

The effective barrier heights and ideality factors of identically fabricated Ni/n-type 6 H-SiC Schottky diodes (23 dots) have been calculated from their experimental forward bias current–voltage (I–V) and reverse bias capacitance–voltage (C–V) characteristics. A statistical study related to the experimental barrier heights (BHs) and ideality factors of the diodes has been made. The effective Schottky barrier heights (SBHs) and ideality factors obtained from the I–V and C–V characteristics have differed from diode to diode. The BHs obtained from the I–V characteristics varied from 0.85 to 1.03 eV, the ideality factors varied from 1.13 to 1.40 and the BHs from C^-2–V characteristics varied from 1.10 to 1.70 eV. The experimental BH and ideality factor distributions obtained from the I–V characteristics are fitted by a Gaussian function, and their mean values are found to be 0.92±0.04 eV and 1.29±0.08 eV, respectively. The lateral homogeneous SBH value of 1.16 eV for the Ni/n-type 6H-SiC diodes has been calculated from a linear extrapolation of the effective barrier heights to n_if=1.03. PACS 79.40.+z; 73.40.Sx; 73.30.+y; 71.20.Nr     

Ti/4H-SiC肖特基势垒二极管抗辐射特性的研究

本文采用γ射线、高能电子和中子对Ti/4H-SiC肖特基势垒二极管(SBD)的抗辐射特性进行了研究.研究发现对于γ射线和1 MeV电子辐照,-30 V辐照偏压对器件的辐照效应没有明显的影响.经过1 Mrad(Si)的γ射线或者1×l0¹³ n/cm²的中子辐照后,Ti/4H-SiC肖特基接触都没有明显退化;经过3.43×10¹⁴ e/cm²的1 MeV电子辐照后Ti/4H-SiC的势垒高度比辐照前轻微下降,这是由于高能 关键词： 碳化硅 肖特基 辐照 偏压     

Temperature-dependent characteristics of 4H-SiC junction barrier Schottky diodes

The current-voltage characteristics of 4H-SiC junction barrier Schottky(JBS) diodes terminated by an offset field plate have been measured in the temperature range of 25-300 C.An experimental barrier height value of about 0.5 eV is obtained for the Ti/4H-SiC JBS diodes at room temperature.A decrease in the experimental barrier height and an increase in the ideality factor with decreasing temperature are shown.Reverse recovery testing also shows the temperature dependence of the peak recovery current density and the reverse recovery time.Finally,a discussion of reducing the reverse recovery time is presented.     

Comparison of electrical characteristic between AlN/GaN and AlGaN/GaN heterostructure Schottky diodes

Ni/Au Schottky contacts on AlN/GaN and AlGaN/GaN heterostructures are fabricated.Based on the measured current–voltage and capacitance–voltage curves,the electrical characteristics of AlN/GaN Schottky diode,such as Schottky barrier height,turn-on voltage,reverse breakdown voltage,ideal factor,and the current-transport mechanism,are analyzed and then compared with those of an AlGaN/GaN diode by self-consistently solving Schrdinger’s and Poisson’s equations.It is found that the dislocation-governed tunneling is dominant for both AlN/GaN and AlGaN/GaN Schottky diodes.However,more dislocation defects and a thinner barrier layer for AlN/GaN heterostructure results in a larger tunneling probability,and causes a larger leakage current and lower reverse breakdown voltage,even though the Schottky barrier height of AlN/GaN Schottky diode is calculated to be higher that of an AlGaN/GaN diode.     

High-temperature current conduction through three kinds of Schottky diodes

Fundamentals of the Schottky contacts and the high-temperature current conduction through three kinds of Schottky diodes are studied. N-Si Schottky diodes, GaN Schottky diodes and AlGaN/GaN Schottky diodes are investigated by I--V--T measurements ranging from 300 to 523~K. For these Schottky diodes, a rise in temperature is accompanied with an increase in barrier height and a reduction in ideality factor. Mechanisms are suggested, including thermionic emission, field emission, trap-assisted tunnelling and so on. The most remarkable finding in the present paper is that these three kinds of Schottky diodes are revealed to have different behaviours of high-temperature reverse currents. For the n-Si Schottky diode, a rise in temperature is accompanied by an increase in reverse current. The reverse current of the GaN Schottky diode decreases first and then increases with rising temperature. The AlGaN/GaN Schottky diode has a trend opposite to that of the GaN Schottky diode, and the dominant mechanisms are the effects of the piezoelectric polarization field and variation of two-dimensional electron gas charge density.     

4H-SiC肖特基二极管的电荷收集特性

针对极端环境下耐辐照半导体核探测器的研制需求,采用耐高温、耐辐照的4H碳化硅(4H-SiC)宽禁带材料制成肖特基二极管,研究了该探测器对241Am源粒子的电荷收集效率。从电容-电压曲线得出该二极管外延层净掺杂数密度为1.991015/cm3。从正向电流-电压曲线获得该二极管肖特基势垒高度为1.66 eV,理想因子为1.07,表明该探测器具备良好的热电子发射特性。在反向偏压高达700 V时,该二极管未击穿,其漏电流仅为21 nA,具有较高的击穿电压。在反向偏压为0~350 V范围内研究了该探测器对3.5 MeV 粒子电荷收集效率,在0 V时为48.7%,在150 V时为99.4%,表明该探测器具有良好的电荷收集特性。     

Trapezoid mesa trench metal-oxide semiconductor barrier Schottky rectifier: an improved Schottky rectifier with better reverse characteristics

An improved structure of Schottky rectifier,called a trapezoid mesa trench metal-oxide semiconductor (MOS) barrier Schottky rectifier (TM-TMBS),is proposed and studied by two-dimensional numerical simulations.Both forward and especially better reverse I-V characteristics,including lower leakage current and higher breakdown voltage,are demonstrated by comparing our proposed TM-TMBS with a regular trench MOS barrier Schottky rectifier (TMBS) as well as a conventional planar Schottky barrier diode rectifier.Optimized device parameters corresponding to the requirement for high breakdown voltage are given.With optimized parameters,TM-TMBS attains a breakdown voltage of 186 V,which is 6.3% larger than that of the optimized TMBS,and a leakage current of 4.3×10 6 A/cm 2,which is 26% smaller than that of the optimized TMBS.The relationship between optimized breakdown voltage and some device parameters is studied.Explanations and design rules are given according to this relationship.     

Temperature-dependent characteristics of 4Hben SiC junction barrier Schottky diodes

The current-voltage characteristics of 4H-SiC junction barrier Schottky (JBS) diodes terminated by an offset field plate have been measured in the temperature range of 25-300 ℃. An experimental barrier height value of about 0.5 eV is obtained for the Ti/4H-SiC JBS diodes at room temperature. A decrease in the experimental barrier height and an increase in the ideality factor with decreasing temperature are shown. Reverse recovery testing also shows the temperature dependence of the peak recovery current density and the reverse recovery time. Finally, a discussion of reducing the reverse recovery time is presented.     

High-Power GaN Electronic Devices

Gallium Nitride (GaN) and related materials (especially AlGaN) recently have attracted a lot of interest for applications in high-power electronics capable of operation at elevated temperatures and high frequencies. The AlGaInN system offers numerous advantages. These include wide bandgaps, good transport properties, the availability of heterostructures (particularly AlGaN/GaN), the experience base gained by the commercialization of GaN-based laser and light-emitting diodes and the existence of a high growth rate epitaxial method (hydride vapor phase epitaxy, HVPE) for producing very thick layers or even quasisubstrates. These attributes have led to rapid progress in the realization of a broad range of GaN electronic devices. Al_xGa_1-xN (x=0 ～.25) Schottky rectifiers were fabricated in a lateral geometry employing p⁺-implanted guard rings and rectifying contact overlap onto an SiO₂ passivation layer. The reverse breakdown voltage (V_B) increased with the spacing between Schottky and ohmic metal contacts, reaching 9700 V for Al_0.25Ga_0.75N and 6350 V for GaN, respectively, for 100-µm gap spacing. Assuming lateral depletion, these values correspond to breakdown field strengths of <9.67×10⁵ Vcm^?2, which is roughly a factor of 5 lower than the theoretical maximum in bulk GaN. The figure of merit (V_B)²/R_ON, where RON is the on-state resistance, was in the range 94 to 268 MWcm^?2 for all the devices. Edge-terminated Schottky rectifiers were also fabricated on quasibulk GaN substrates grown by HVPE. For small-diameter (75?µm) Schottky contacts, Vs measured in the vertical geometry was ～700?V, with an on-state resistance (RON) of 3?mΩcm², producing a figure-of-merit V_B ²/R_ON of 162.8?MW-cm^?2. GaN p-i-n diodes were also fabricated. A direct comparison of GaN p-i-n and Schottky rectifiers fabricated on the same GaN wafer showed higher reverse breakdown voltage for the former (490?V vs. 347?V for the Schottky diodes), but lower forward turn-on voltages for the latter (～3.5?V vs. ～5?V for the p-i-n diodes). The forward I-V characteristics of the p-i-n rectifiers show behavior consistent with a multiple recombination center model. The reverse current in both types of rectifiers was dominated by surface perimeter leakage at moderate bias. Finally, all of the devices we fabricated showed negative temperature coefficients for reverse breakdown voltage, which is a clear disadvantage for elevated temperature operation. Bipolar devices are particularly interesting for high current applications such as microwave power amplifiers for radar, satellite, and communication in the l～5?GHz range, powers >l00?W, and operating temperatures >425°C. pnp Bipolar Junction Transistors and pnp Heterojunction Bipolar Transistors were demonstrated for the first time. For power microwave applications, small area self-aligned npn GaN/AlGaN HBTs were attempted. The devices showed very promising direct current characteristics.     

Electric field breakdown of lateral-type Schottky diodes formed on lightly doped homoepitaxial diamond

The reverse current of lateral-type Schottky diodes fabricated on p-type homoepitaxial diamond was analyzed by changing the distance between Schottky and Ohmic electrodes and the metal materials in the Schottky electrodes. The maximum electric field at breakdown was 0.56 MV cm⁻¹ for the Au Schottky contact and less than 0.26 MV cm⁻¹ for the Al Schottky contact. The breakdown voltage depended on the electrode distance when the diamond surface was revealed in vacuum, whereas the Schottky diodes sustained the applied voltage of 500 V, corresponding to 0.69 MV cm⁻¹, after covering of the diamond surface with an insulating liquid. Diamond surface protection is an indispensable technique for fabrication of high-voltage Schottky diodes based on diamond.     

Study and optimal simulation of 4H-SiC floating junction Schottky barrier diodes’ structures and electric properties

This paper stuides the structures of 4H-SiC floating junction Schottky barrier diodes. Some structure parameters of devices are optimized with commercial simulator based on forward and reverse electrical characteristics. Compared with conventional power Schottky barrier diodes, the devices are featured by highly doped drift region and embedded floating junction layers, which can ensure high breakdown voltage while keeping lower specific on-state resistance, and solve the contradiction between forward voltage drop and breakdown voltage. The simulation results show that with optimized structure parameter, the breakdown voltage can reach 4.36 kV and the specific on-resistance is 5.8 mΩ·cm2 when the Baliga figure of merit value of 13.1 GW/cm2 is achieved.     

太赫兹源场致发射电子源

通过粒子模拟(PIC)软件模拟计算了在ps级别下二极与三极结构碳纳米管场致发射的电流密度与电子注聚焦性能。阳极电压在2 kV时,二极结构下电流密度达到1.85 A/cm2;三极结构下,栅压700 V时发射电流密度达到2.3 A/cm2,且在一定的三极结构参数与电极电压下,可以获得较好的电子注聚束效果。通过碳纳米管二极管发射实验,获得了6.6 A/cm2的发射电流密度,总发射电流达到52.1 mA,可以为太赫兹器件提供连续发射的电子注。     

Ni/4H-SiC肖特基势垒二极管的γ射线辐照效应

对制备的Ni/4H-SiC肖特基势垒二极管（SBD）进行了γ射线辐照试验,并在辐照过程中对器件分别加0和-30?V偏压.经过1?Mrad（Si）总剂量的γ射线辐照后,不同辐照偏压下的Ni/4H-SiC肖特基接触的势垒高度和理想因子没有退化,SiC外延层中的少子寿命也没有退化.辐照后器件的反向电流下降,这是由于器件表面的负界面电荷增加引起的.研究表明,辐照偏压对Ni/4H-SiC SBD的辐照退化效应没有明显的影响. 关键词： 碳化硅 肖特基 辐照效应 偏压     

n,p柱宽度对超结SiGe功率二极管电学特性的影响

结合SiGe材料的优异性能与超结结构在功率器件方面的优势,提出了一种超结SiGe功率二极管.该器件有两个重要特点:一是由轻掺杂的p型柱和n型柱相互交替形成超结结构,取代传统功率二极管的n^-基区;二是阳极p⁺区采用很薄的应变SiGe材料.该二极管可以克服常规Si p⁺n^-n⁺功率二极管存在的一些缺陷,如阻断电压增大的同时,正向导通压降随之增大,反向恢复时间也变长.利用二维器件模拟软件MEDICI仿真 关键词： 超结 锗硅二极管 n p柱宽度 电学特性     

Growth of InSe:Mn semiconductor crystals by Bridgman–Stockbarger technique and analysis of electron irradiation effects on Sn/InSe:Mn Schottky diodes

Mn-doped p-InSe semiconductor crystals were grown by Bridgman –Stockbarger technique. The crystals were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and fabricated Sn/InSe:Mn Schottky diodes. The current–voltage (I–V) and capacitance–voltage (C–V) measurements of diodes were investigated to determine the response of devices to electron irradiation with 9?MeV energy and 1.2?×?10¹⁰?e^??cm^?2 dose. After irradiation, the ideality factor and barrier height of the Sn/InSe:Mn Schottky diode were determined as 1.66 and 0.85?eV, respectively. Before irradiation, they were determined as 1.37 and 0.90?eV, respectively. It has been concluded that the radiation with high energy may contribute to form defects at the interface of the Sn/InSe:Mn device.     

Effect of annealing on the electronic parameters of Au/poly(ethylmethacrylate)/n-InP Schottky diode with organic interlayer

A thin poly(ethylmethacrylate) (PEMA) layer is deposited on n-InP as an interlayer for electronic modification of Au/n-InP Schottky structure. The electrical properties of Au/PEMA/n-InP Schottky diode have been investigated by current–voltage (I–V) and capacitance–voltage (C–V) measurements at different annealing temperatures. Experimental results show that Au/PEMA/n-InP structure exhibit a good rectifying behavior. An effective barrier height as high as 0.83 eV (I–V) and 1.09 eV (C–V) is achieved for the Au/PEMA/n-InP Schottky structure after annealing at 150 °C compared to the as-deposited and annealed at 100 and 200 °C. Modified Norde's functions and Cheung method are also employed to calculate the barrier height, series resistance and ideality factors. Results show that the barrier height increases upon annealing at 150 °C and then slightly decreases after annealing at 200 °C. The PEMA layer increases the effective barrier height of the structure as this layer creates a physical barrier between the Au metal and the n-InP. Terman's method is used to determine the interface state density and it is found to be 5.141 × 10¹² and 4.660 × 10¹² cm^?2 eV^?1 for the as-deposited and 200 °C annealed Au/PEMA/n-InP Schottky diodes. Finally, it is observed that the Schottky diode parameters change with increasing annealing temperature.     

Characterization of vertical Au/β-Ga_2O_3 single-crystal Schottky photodiodes with MBE-grown high-resistivity epitaxial layer

High-resistivity β-Ga_2O_3 thin films were grown on Si-doped n-type conductive β-Ga_2O_3 single crystals by molecular beam epitaxy(MBE).Vertical-type Schottky diodes were fabricated,and the electrical properties of the Schottky diodes were studied in this letter.The ideality factor and the series resistance of the Schottky diodes were estimated to be about1.4 and 4.6×10~6 Ω.The ionized donor concentration and the spreading voltage in the Schottky diodes region are about4×10~(18)cm~(-3) and 7.6 V,respectively.The ultra-violet(UV) photo-sensitivity of the Schottky diodes was demonstrated by a low-pressure mercury lamp illumination.A photoresponsivity of 1.8 A/W and an external quantum efficiency of8.7 ×10~2%were observed at forward bias voltage of 3.8 V,the proper driving voltage of read-out integrated circuit for UV camera.The gain of the Schottky diode was attributed to the existence of a potential barrier in the i-n junction between the MBE-grown highly resistive β-Ga_2O_3 thin films and the n-type conductive β-Ga_2O_3 single-crystal substrate.