Solvent-Free One-Pot Synthesis of Sulfonephthaleins from Saccharin and Phenols

Sulfonephthaleins can be synthesized in a single pot from saccharin and phenol via the in situ formation of 2-sulfobenzoic anhydride, followed by its reaction with phenol using H₂SO₄ as the condensing agent, in the absence of any solvent. This solvent-free synthesis is more economical and environmentally benign.     

新型红色荧光粉Sr3Al2O6的合成和发光性能研究

稀土金属离子激活的多铝酸盐发光材料，在可见光区具有较高的量子效率犤１～４犦，充分显示出这类荧光发光材料，在高效节能、环保、电光源与新一代可见光显示器领域的应用前景犤４～９犦。特别是SrAl２O４∶Eu２＋的持续发光现象的发现犤２，３犦，激起了对以稀土金属离子为激活剂，碱土铝酸盐为基质的长余辉无机发光材料体系的兴趣。研究表明其发光强度和余辉时间是传统硫化物发光材料的十倍以上，利用其长余辉储光－发光特性，有望开发新型发光油漆、涂料、发光陶瓷、发光塑料、薄膜、发光纸、发光纤维犤４犦。早在七十年代，荷兰菲利…     

Thermal decomposition of cobalt nitrato compounds: Preparation of anhydrous cobalt(II)nitrate and its characterisation by Infrared and Raman spectra

The thermal decomposition of Co(NO₃)₂·6H₂O (1) as well as that one of NO[Co(NO₃)₃] (Co(NO₃)₂·N₂O₄) (2) was followed by thermogravimetric (TG) measurements, X-ray recording and Raman and IR spectra. The stepwise decomposition reactions of 1 and 2 leading to anhydrous cobalt(II)nitrate (3) were established. In N₂ atmosphere, cobalt oxides are finally formed whereas in H₂/N₂ (10% H₂) cobalt metal is produced. Rapid heating of cobalt(II)nitrate hexahydrate causes melting (formation of a hydrate melt) and therefore side reactions in the hydrate melt by incoupled reactions and evolution/evaporation of different species as, e.g., HNO₃, NO₂, etc. In case of larger amounts in dense packing in the sample container, the formation of oxo(hydoxo)nitrates is possible at higher temperature. For 2, its thermal decomposition to 3 was followed and its decomposition mechanism is proposed.     

New scandium rhodium boride Sc<Subscript>4</Subscript>Rh<Subscript>17</Subscript>B<Subscript>12</Subscript> with a framework structure: synthesis,crystal structure,and properties

The new scandium rhodium boride Sc₄Rh₁₇B₁₂ was synthesized by arc-melting of the elements followed by annealing in inert atmosphere. The crystal structure of Sc₄Rh₁₇B₁₂ was solved using single crystal X-ray diffraction data. The structure can be described as a three-dimensional frame-work formed by trigonal prisms [BRh₆] and [BRh₅Sc] with isolated boron atoms inside the prisms and trigonal prisms [BRh₅B] representing the coordination polyhedra of paired boron atoms. The temperature dependences of the magnetic susceptibility and specific resistance of Sc₄Rh₁₇B₁₂ revealed that the compound is a Pauli paramagnet and shows metal-like specific resistance.     

Total synthesis of calystegine A7

A straightforward chiral pool synthesis for the glycosidase inhibitor calystegine A₇ (isolated from Lycium chinense) from methyl α-d-glucopyranoside is described. Keysteps of this synthesis include a ultrasound assisted Zn-mediated tandem ring opening reaction followed by a Grubbs' catalyst mediated ring closure metathesis.     

CRTA Study of the Reduction of UO2F2 into UO2 by Dry H2

The reduction of UO₂F₂ by dry H₂ was studied by Controlled Rate EGA, with a special set-up operating under a gas flow under atmospheric pressure. At the constant transformation rate selected, this reduction apparently takes place in one main step, around 450°C (for a total duration of 100 h), followed by a small exothermic step. The final product is a stoichiometric, well crystallized UO₂. XRD analysis shows the occurrence of two successive intermediates of which one has a structure close to that of UO₂, but with interstitial fluorine atoms. This revised version was published online in August 2006 with corrections to the Cover Date.     

Facile Construction of the 7,8‐Olefin Linkage in Vitamin D3: A Practical Synthesis Benefiting the Vitamin D3 Analog Study

Abstract

A facile procedure for construction of the 7,8‐olefin linkage in vitamin D₃ is described. Treatment of a mixture of A‐ring phosphine oxide and CD‐ring ketone in THF with lithium hexamethyldisilazide (LHMDS) at ?20°C followed by gradual heating to 50°C gives the key intermediate of vitamin D₃ analogs in excellent yield. This simplified procedure makes possible small‐scale synthesis benefiting the vitamin D₃ analog study.     

Synthesis of 2-pentafluorosulfanylnaphthalene

A three step synthesis of 2-pentafluorosulfanylnaphthalene is reported. Initial addition of SF₅Cl to benzobarralene was followed by elimination to form 2-pentafluorosulfanylbenzobarralene. Heating of this compound with 3,6-bis-(2-pyridyl)-1,2,4,5-tetrazine led to elimination of the ethylene bridge via a sequence of cycloadditions and retro-cycloadditions to form the title compound.     

Comparative Studies of Removal of Methyl Green and Basic Fuchsin from Wastewater by a Novel Magnetic Nanoparticles Mg-Ferrites

Adsorptions of methyl green (MG) and basic fuchsin (BF) by magnetic MgFe₂O₄ were compared in this study. Adsorption mechanism studies indicated that electrostatic interaction may play a main role for MG, but for BF, hydrogen-bond interaction may be more predominant. Kinetics data of both dyes conformed to the pseudo-second order model. The overall rate process was mainly governed by intraparticle diffusion. Comparative isotherm studies indicated that MG followed the Langmuir isotherm and BF followed the Freundlich isotherm. Thermodynamic parameters revealed that the adsorption process was endothermic (ΔH ⁰ > 0) for MG, but it was exothermic (ΔH ⁰ < 0) for BF.     

An Efficient Procedure for the Synthesis of Benzoxazole and Benzothiazole Derivatives Using a H2O2/SiO2-FeCl3 System

A series of benzoxazole and benzothiazoles was readily prepared from the reaction of ortho-aminophenol/ortho-aminothiophenol and aldehydes using solid silica supported ferric chloride (SiO₂-FeCl₃) as catalyst followed by oxidation with H₂O₂ under ambient conditions. Some of advantages of this method are a simple and convenient procedure, easy purification, and shorter reaction times.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.     

簇合物(p-H2)N-HCCCN的结构和能量

采用两体作用势模型和遗传算法对簇合物（p-H₂）_N-HCCCN的极小能量结构和能量进行了理论研究.结果表明,20 个para-H₂分子形成HCCCN周围的第一个溶剂层,第一个溶剂层包含三个溶剂环,每个溶剂环都有6 个para-H₂分子,第19和20个para-H₂分子分别聚集在HCCCN分子的N、H原子末端. 进一步计算了（p-H₂）_N-HCCCN的化学势,发现化学势随para-H₂分子个数的增加呈震荡变化.     

Immobilization of Tris-(8-hydroxyquinoline) aluminum onto P4VP polymer thin films by UV irradiation cross-linking

We report a novel method for the immobilization of Tris-(8-hydroxyquinoline) aluminum (Alq₃) onto poly(4-vinylpyridine) (P4VP) thin polymer films by UV irradiation cross-linking. The polymer films were prepared by spin-coating of P4VP onto cleaned silicon wafer surface followed by UV irradiation. The thicknesses of the polymer thin films were measured by ellipsometry with different irradiation times. The immobilization of Alq₃, orientation and the surface activity were followed using photoluminescence and UV-visible spectroscopy. The surface morphology was investigated by using field emission scanning electron microscopy and atomic force microscopy. Patterning of Alq₃ on P4VP film was obtained using photolithography technique. Our experimental results show that the cross-linked P4VP thin film is a universal surface modifier.     

Aqueous Solution-Gel Synthesis of Strontium Bismuth Niobate (SrBi2Nb2O9)

The synthesis of multimetal oxides containing pentavalent elements like Nb and Ta out of an aqueous solution is very complicated due to the extremely high sensitivity of these metals towards hydrolysis. Moreover the only water-soluble starting compound is the oxalate which is not very suited for gel formation. Nevertheless, from Nb-oxalate it is possible to prepare a water-soluble Nb(V)-precursor by chemical modification. The synthesized precursor remains stable in the pH-range needed for gel formation. This Nb(V)-precursor is used for the synthesis of the ferroelectric material SrBi₂Nb₂O₉ (SBN). An aqueous acetate-citrate solution-gel precursor for SBN was prepared. The chemical homogeneity of this precursor was investigated by means of TEM-experiments. All metal ions were found to be homogeneously dispersed in the precursor gel at least down to 10 nm. The SBN phase formation is followed by means of X-ray Diffraction. It has been shown that the perovskite phase already forms at 550°C.     

P2O5-Promoted Efficient and Diastereoselective Synthesis of Substituted 5-Methylene-dihydropyran-2,6-diones and 3-Methylene-3,4-dihydropyran-2-ones

A simple, efficient, and diastereoselective synthesis of 5-methylene-dihydropyran-2,6-diones and 3-methylene-3,4-dihydropyran-2-ones from substrates afforded by the S_N2 reaction between the acetyl derivatives of the Baylis–Hillman adducts and methylacetoacetate or acetylacetone or benzoyl acetone via saponification followed by P₂O₅-mediated cyclization is described.     

AgNO3 catalyzed synthesis of 5-substituted-1H-tetrazole via [3+2] cycloaddition of nitriles and sodium azide

An efficient one-pot, convenient catalysis for the synthesis of 5-substituted-1H-tetrazoles is reported. The [3+2] cycloaddition involves various nitriles, sodium azide in refluxing DMF and AgNO₃ as catalyst to give corresponding 5-substituted-1H-tetrazoles in good to excellent yields. It is expected that the reaction proceeds via in situ formation of a silver azide species, which participates in coordination of nitrile moiety followed by cycloaddition of azide ion to give tetrazole.     

Hydrogenation of nitrate in water over bimetallic Pd-Ag/Al2O3 catalysts

Hydrogenation of nitrate (NO₃ ⁻) in water was studied with 0.8 ×10⁻³–3.2 ×10⁻³ mol/dm³ of reactant in the temperature range of 293–313 K over palladium promoted Ag catalysts. Pd-Ag catalysts with a low ratio of Ag/Pd were characterized by high efficiency in the reduction of nitrates. The degradation of nitrates followed approximately first order decay and the estimated apparent activation energy was about 4 kJ/mol.     

Cr2(WO4)3和Cr2(MoO4)3的负热膨胀特性研究

用液相反应-前驱物烧结法制备了Cr₂(WO₄)₃和Cr₂(MoO₄)₃粉体。298～1 073 K的原位粉末X射线衍射数据表明Cr₂(WO₄)₃和Cr₂(MoO₄)₃的晶胞体积随温度的升高而增大, 本征线热膨胀系数分别为(1.274±0.003)×10^-6 K^-1和(1.612±0.003)×10^-6 K^-1。用热膨胀仪研究了Cr₂(WO₄)₃和Cr₂(MoO₄)₃在静态空气中298～1 073 K范围内热膨胀行为，即开始表现为正热膨胀，随后在相转变点达到最大值，最后表现为负热膨胀，其负热膨胀系数分别为(-7.033±0.014)×10^-6 K^-1和(-9.282±0.019)×10^-6 K^-1。     

Sol-Gel Derived TiO2-SiO2 Fibres

TiO₂−SiO₂ fibres with 0, 5, 10 and 20 volume % SiO₂ have been prepared by drawing from a gel followed by sintering at different temperatures. Nearly one meter long fibres can be drawn easily in conditions of about 50% relative humidity. Addition of SiO₂ inhibits the crystallisation of TiO₂ and also the anatase → rutile transformation and improves the strength of the fibres. While the pure TiO₂ fibres are brittle, those with 5, 10 and 20 volume % SiO₂ are flexible and strong. Tensile strength values as high as 3 GPa have been achieved in the 10 volume % SiO₂−TiO₂ fibres. Fibres heated above 900°C are brittle. The shape of the cross section of the fibres is found to depend on their diameters.     

Thermosonimetry and thermomicroscopy of the decomposition of NaClO4 and KClO4

Thermal decompositions of NaClO₄ and KClO₄ were followed by simultaneous TS-DTA and thermomicroscopy. For NaClO₄ TS curves corresponding to melting/decomposition and solidification of molten NaCl were found to consist of six peaks. During decomposition of KClO₄, three TS peaks appeared. The origin of these TS peaks is discussed on the basis of thermomicroscopic observations during which melting of the particles, evolution of bubbles of different sizes, formation of solid products of varied morphologies, vigorous vibration of these solids, and precipitation of NaCl or KCl were observed.