25,26-Dialkoxycalix[4]arenes. Part 1: 25-Alkoxy-26,27-diacetoxy route

Acetylation of calix[4]arene 1,3-dialkyl ethers yielded the corresponding monoacetates. The ¹H NMR spectral analysis indicated that the products’ alkoxy moieties were ‘rotation restricted’. Acylation of calix[4]arene monoalkyl ethers with acetyl chloride yielded monoacetates and/or 2,3-diacetates in different reaction conditions. A simple recrystallization process was able to isolate 2,3-diacetates in good yield. The ¹H NMR spectra of the diacetylated products indicated that those compounds also possessed the ‘rotation restricted’ alkoxy moieties. In the presence of K₂CO₃ as reaction base, alkylation of 2,3-diacetates produced the acetyl-migrated 1,3-dialkyloxy derivatives. Basic hydrolysis of the acetyl-migrated compounds yielded the known 1,3-dialkoxycalix[4]arenes. In the presence of NaH as reaction base, 2,3-diacetates were alkylated with and without the acetyl-migration. For the highly reactive benzyl bromide and allyl bromide, the majority of alkylation proceeded without acetyl-migration. In the other alkyl halides, the products were the acetyl-migrated 1,3-dialkoxy derivatives along with less than one-fourth the amount of non-migrated 1,2-dialkoxy derivatives.     

25-Alkoxy-26-benzoyloxycalix[4]arenes: the reaction mechanism of benzoyl migration

In the presence of K₂CO₃ as reaction base, the 25-alkoxy-27-benzoyloxy-calix[4]arenes were converted into 25-alkoxy-26-benzoyloxy derivatives by benzoyl-migration. A benzoyl-migrated reaction mechanism with a cyclic orthobenzoate-like intermediate was proposed, and the mechanism was supported by the identical reaction results on the conversion of 25-ethoxy-27-benzoyloxycalix[4]arene to 25-ethoxy-26-benzoyloxycalix[4]arene, and vice versa.     

Microwave-assisted synthesis of 1,3-dialkyl ethers of calix[4]arenes: application to the synthesis of cesium selective calix[4]crown-6 ionophores

Partial etherification of phenolic-OH groups of calix[4]arenes with various alkyl halides/tosylates and K₂CO₃ under microwave irradiation afforded 1,3-dialkoxycalix[4]arenes in their cone conformation only as predominant/sole product in good yields (71–85%). The protocol was found to be much superior to conventional heating both in terms of yield and reaction time. Some of the 1,3-dialkoxycalix[4]arenes were elaborated further to the syntheses of cesium selective calix[4]crown-6 ionophores.     

Hydrogen bonding patterns of calix[4]arenes with thiourea functionalities in solution and in the solid state

[structure: see text] We have synthesized a number of calix[4]arene derivatives presenting thiourea functional groups at their upper rims by the condensation of a 1,3-di(p-amino)calix[4]arene with alkyl isothiocyanates. Mono- and dithiourea-substituted calix[4]arenes were prepared selectively in good yields, and homocoupling of the former led to calix[4]arene dimers with a thiourea linker. X-ray crystallography revealed interesting intra- and intermolecular hydrogen bonding patterns. (1)H NMR data and computational studies also provided some insight into the hydrogen bonding patterns.     

Synthesis of 2-alkyl- and 2-carboxy-p-tert-butylcalix[4]arenes via the lithiation of tetramethoxy-p-tert-butylcalix[4]arene

[reaction: see text]. Tetramethoxy-p-tert-butylcalix[4]arene reacts readily with n-butyllithium to give a putative monolithiated intermediate that is substituted with alkyl halides and carbon dioxide to give in 60-75% yield conformationally mobile calix[4]arenes monosubstituted at the methylene bridge (2-position). 2-Alkyl- and 2-benzyl-substituted tetramethoxycalix[4]arenes are converted in 62-68% overall yield to the corresponding tetrahydroxy-p-tert-butylcalix[4]arenes by treatment with boron tribromide. The tetrahydroxy-p-tert-butylcalix[4]arenes exist in the cone conformation at room temperature in CDCl3 as judged by NMR spectroscopy.     

Regio- and stereoselective 1(S)-camphorsulfonylation of monoalkoxycalix[4]arenes

The reaction of calix[4]arene monoalkyl ethers with 1(S)-camphor-10-sulfonyl chloride yields 1,2- or 1,3-alkoxy-1(S)-camphorsulfonyloxycalixarenes depending on the nature of the base used. In the presence of triethylamine only 1,3-substituted derivatives are formed. Two diastereomers of the 1,2-substituted calixarenes with clockwise and anticlockwise arrangement of alkyl and camphorsulfonyl groups at the narrow rim are formed in the presence of sodium hydride or potassium carbonate. Due to chiral induction of the camphorsulfonyl group the 1,2-substitution is diastereoselective. The ratio of diastereomers formed is dependent on the alkyl groups at the calixarene narrow rim.     

上端含长链烷基的手性杯[4]芳烃合成

脱叔丁基的杯[4]芳烃与长链的叔醇或者叔氯代烷烃进行傅-克反应, 在其上端引入长链烷基. 然后在下端引入光学活性的1-苯基乙胺基团, 得到了一系列上端含长链烷基的手性杯[4]芳烃.     

新型偶氮杯[4]芳烃的合成与构象研究

使用相应的w-硫醚羧酸酰氯与杯[4]芳烃或者偶氮杯[4]芳烃酰化合成了一类新型的杯[4]芳烃衍生物。分离得到六个新化合物4a-4c和5a-5c，并使用MALDI, EA, ¹H和¹³C NMR进行了表征。NMR图谱表明偶氮杯[4]芳烃衍生物 5a-5c均为1,3-转换构型，而4a-4c则均为锥式构型。对偶氮杯[4]芳烃衍生物5a-5c的红外和紫外性质也进行了研究。     

Bridge-disubstituted calix[4]arenes obtained via a new preparative route. Synthesis and structural study

A series of calix[4]arenes bearing various substituents including alkyl, p-bromobenzyl, carboxy and allyl at opposite methylene bridges has been synthesized via successive metallation followed by nucleophilic substitution. In a first step, mono-lithiated calix[4]arenes react with terminal bromoalkanes to give 2-alkylated calix[4]arenes or with CO₂ the respective calixarene-2-carboxylic acid in good yields. A second lithiation step of the monosubstituted products with subsequent attachment of both polar and non-polar substituents yields several new diametrally bridge-disubstituted calix[4]arenes. 2D-NMR measurements establish the disubstituted calixarenes to predominantly adopt the 1,2-alternate conformation in solution. First examples of X-ray crystal structures of the new type of disubstituted calix[4]arenes are described featuring the calix[4]arene also in the rare 1,2-alternate conformation.     

含酰胺和席夫碱单元的杯[4]芳烃衍生物的合成与配合性能

杯[4]-1,3-二乙酸乙酯衍生物1与水合肼反应生成杯[4]芳烃酰肼衍生物2, 然后进一步与相应的芳醛反应, 高产率地合成了三个新型的含酰胺和席夫碱单元的杯[4]芳烃衍生物3a～3c和一例新型杯[4]冠醚4. 阳离子萃取实验表明新型杯芳烃衍生物比只含有酰胺基或席夫碱基的杯芳烃衍生物有更强的软金属离子配合性能, 杯[4]冠醚4还对Ag^＋有较好的选择性萃取能力.     

Stereoselective dialkylation of the proximal hydroxy groups of calix- and thiacalix[4]arenes

Treatment of p-tert-butylcalix[4]arene (C1) and its sulfur-bridged analog T1 with 1,3-dichloro-1,1,3,3-tetraisopropyldisiloxane in the presence of imidazole gives proximally O,O'-disiloxane-1,3-diyl-bridged calixarenes C2 and T2 in excellent yields, respectively. Subsequent base-catalyzed etherification of the remaining hydroxy groups with alkyl halides gives syn- and anti-O',O'-dialkylated products, the stereoselectivity of which varies depending on the nature of the macrocycle, as well as the metal cation of the base employed. Thus, conventional calixarene C2 preferentially affords syn compounds of 1,2-alternate conformation (C3) with the aid of tert-BuOK and K(2)CO(3) and anti counterparts of partial-cone conformation (C4) with Cs(2)CO(3). On the other hand, thiacalixarene T2 affords syn compounds of 1,2-alternate conformation (T3) with any of the bases. The disiloxanediyl bridge of the resulting products can readily be removed by treatment with tetrabutylammonium fluoride. Thus, the net process provides an efficient method for the regio- and stereoselective synthesis of proximally dialkylated calix[4]arenes.     

New artificial receptors from selectively functionalized calix[4]arenes

Abstract

The development of new synthetic methods for the monoalkylation of calix[4]arenes at the lower rim allows the synthesis of a new class of trihydroxamate siderophores. Three chelating hydroxamic acid units are introduced through a sequence of reactions which blocks the macrocycle in the cone conformation. The new ligands obtained form neutral 1:1 complexes (FeL) with iron (III), which are stable in EtOH/H₂O 9:1 at pH 2–7. Calix[4]arene bis-crown ethers are prepared by exploiting the selective 1,2-(proximal) functionalization of calix[4]arenes at the lower rim. These ligands are, however, less effective in complexing alkali metal cations compared with the 1,3-calix[4]arene crown-ethers which, in their partial cone structure, offer a better shielding for the complexed cations. Rigid upper rim-bridged calix[4]arenes potentially useful for the inclusion of neutral molecules are prepared by exploiting the selective 1,3-diformylation of calix[4]arene at the upper rim. Finally a new chloromethylation method for calix[4]arenes blocked in the cone conformation is described together with the synthesis of new cavitands.     

Fourfold tetraurea calix[4]arenes--potential cores for the formation of self-assembled dendrimers

Wide rim tetraurea calix[4]arenes monofunctionalized at the narrow rim by COOH or NH2 have been synthesized in five steps from t-butylcalix[4]arene tripropylether. Their covalent linkage via the narrow rim to a central calix[4]arene fixed in the 1,3-alternate conformation led to pentacalix[4]arenes 9 bearing four tetraurea derivatives in the cone conformation in a flexible tetrahedral arrangement. Their self-assembly via the formation of hydrogen bonded dimeric capsules has been studied under different conditions. A fourfold heterodimerisation of tetrakis-tetraurea derivatives of type 9 with tetratosylurea 10 has been confirmed by 1H NMR-spectroscopy and dynamic light scattering.     

Preorganization of diglycolamides on the calix[4]arene platform and its effect on the extraction of Am(III)/Eu(III)

Different diglycolamide (DGA)-substituted calix[4]arene-based extractants were synthesized and evaluated for the extraction of Am(III) and Eu(III), representative trivalent actinide and lanthanide ions, respectively. On the narrow rim of the calix[4]arene platform, the DGA moiety was either 1,3-di- or tetrasubstituted with a varying spacer length between the oxygen and amide nitrogen atom. In addition, DGA groups were appended both to the wide rim and to both rims of calix[4]arenes and their efficiencies were compared for Am(III) and Eu(III) extraction at three different feed acidities. The extraction and separation efficiencies strongly depended on the N-alkyl substituent as well as the spacer length. 1,3-Di-DGA-substituted calix[4]arenes are inferior extractants to the corresponding tetra-DGA-substituted ones. Narrow rim DGA-functionalized derivatives resulted in high extraction efficiencies, while the wide rim DGA-functionalized calix[4]arenes showed practically no extraction.     

Calix[4]arenes with two different chemical modifications at the bridges

Hexabromocalix[4]arene derivatives (3a and 3b) possessing pairs of dibromomethylene and bromomethylene groups located at distal or proximal positions of the calix scaffold were prepared via photochemical bromination of tetramethoxycalix[4]arene. The dibromomethylene groups undergo hydrolysis to afford calix[4]arenes possessing pairs of carbonyl groups and bromomethylene groups located at distal or proximal bridges (4a and 4b, respectively). The bromomethylene groups of 4 undergo reactions with nucleophiles under S(N)1 conditions to afford a wide array of derivatives possessing two different chemical modifications at the bridges.     

QCM 表面自组装胱氨酸1，3－桥连杯[4]芳烃膜用于识别气相丁胺

Two cystine-bearing 1,3-bridged calix[4]arenes were used as the coatings of the quartz crystal microbalance (QCM) with gold electrodes. The two calix[4]arene derivatives were self-assembled onto the gold electrode surface by the covalent attachment between the di-sulfur and gold. The compound of cystine-bearing bi-phenylalanine 1,3-bridged calix[4]arene (CPC) with longer alkyl chain had better self-assembled capacity onto the fresh surfaces of gold electrode than that of cystine-bearing 1,3-bridged calix[4]arene (CC) with comparably shorter alkyl chain.The modified QCM sensors were used to recognize the butylamine isomers in gas. The results showed that the QCM coated with both compounds had preferential affinity to n-butylamine, then i-butylamine, t-butylamine in the range of low concentrations, indicating that in the recognition process, the steric hindrance effect played an important role when forming complex with guest molecules. When the concentrations of the analytes were increased, the polarity and the magnetism of the butylamine became determinative factors. The reversibility was improved greatly and the equilibrium time was much shorter on the self-assembled film than on the film obtained by dropping coating.     

DNA condensation and cell transfection properties of guanidinium calixarenes: dependence on macrocycle lipophilicity, size, and conformation

Calix[n]arenes functionalized with guanidinium groups at the upper rim and alkyl chains at the lower rim bind to DNA, condense it, and in some cases, promote cell transfection depending on their structure and lipophilicity. Atomic force microscopy (AFM) studies indicate that upon DNA binding the hydrophobic association of the lipophilic chains of cone guanidinium calix[4]arenes drives the formation of intramolecular DNA condensates, characterized by DNA loops emerging from a dense core. Furthermore, hexyl and octyl chains confer to these calixarenes cell transfection capabilities. Conversely, larger and conformationally mobile calix[6]- and calix[8]arene methoxy derivatives form intermolecular aggregates characterized by "gorgonlike" structures composed of multiple plectomenes. These adducts, in which interstrand connections are dominated by electrostatic interactions, fail to promote cell transfection. Finally, calix[4]arenes in a 1,3-alternate conformation show an intermediate behavior because they condense DNA, but the process is driven by charge-charge interactions.     

The selective dealkylations: the formylations of the three easily accessible calix[4]arene conformers immobilized by propyl and isopropyl groups

Formyl groups were introduced to the para positions of the three easily accessible calix[4]arene conformers immobilized by four propyl or isopropyl groups by Duff reaction. Propyl group led to exhaustively formylated products due to the weak steric hinderance effect. While as for the isopropoxy calix[4]arenes, with the increase of steric hinderance, 1,3-alternate conformer gave exhaustively formylated product with no alkyl group dealkylating; partial cone conformer gave the tetraformylated proximal A,B-diether in 1,3-alternate conformation; and cone conformer led to triformylated derivatives accompanied by the selective dealkylations of three or two diametrical alkyl groups. The results indicated that the structures of the products were greatly influenced by the steric hinderance effect of the starting compounds.     

The enhancement of luminescent properties of Tb3+ complexes with tetra-1,3-diketone ligands promoted by the tetrathiacalix[4]arene scaffold

This is the first report on the synthesis and characterization of tetra-1,3-diketone derivatives of tetrthia- and calix[4]arenes substituted by acetylacetonyl or dipivaloylmethanyl moieties at the upper rim and bearing hydroxyl groups at the lower rim as ligands for Tb³⁺ complexes. The spatial structure and tautomeric content for the synthesized ligands have been determined by means of X-ray, IR and NMR spectroscopy. Comparison of the sensitizing properties of tetrathiacalix[4]arenes and their calix[4]arene analogues on the Tb³⁺-centered luminescence in DMF solutions has been performed. A substantial enhancement of the luminescent properties of Tb³⁺- complexes with tetra-1,3-diketone ligands promoted by the tetrathiacalix[4]arene scaffold was established.     

Conformational analysis of p-tert-butylcalix[4]arene derivatives with trans-alkyl substituents on opposite methylene bridges: destabilization of the cone form by axial alkyl substituents

The stereochemistry of calix[4]arenes substituted by a pair of identical alkyl substituents in a trans fashion at two distal bridges is analyzed. MM3 calculations suggest that increasing the bulk of the alkyl group at the bridges destabilizes those conformations possessing an axial disposition of the substituent. In contrast to the 1,3-dimethyl ether of p-tert-butylcalix[4]arene, which adopts a cone conformation, solution NMR data indicate that the 1,2-alternate conformation is preferred in the dimethyl ether derivatives 5b (alkyl = i-Pr) and 5c (alkyl = t-Bu). In the derivative substituted by the less bulky methyl substituent (5a), both the cone and 1,2-alternate forms coexist in CDCl3. Increasing the polarity of the solvent increases the relative population of the cone form of 5a and 5b. The steric destabilization ensuing from the presence of the axial substituent is so large in the cone conformation of 5c that the 1,2-alternate conformer is the major form even in polar solvents. The cone --> 1,2-alternate interconversion barrier of 5a is 18.2 kcal mol(-1), indicating that the presence of an axial methyl group both destabilizes the cone conformation and decreases its rigidity.