A new synthetic procedure to spiro[cyclohexane-1,3′-indoline]-2′,4-diones

A new synthetic pathway to spiro[cyclohexane-1,3′-indoline]-2′,4-diones was found starting from 3-chloromethylene-2-indolones 1 and Danishefsky's diene 2. Their synthesis consists of several steps involving the formation of the cycloadducts, the 6-chloro-4-trimethylsilyloxy-2-methoxyspiro[cyclohex-3-en-1,3′-indolin]-2′-one derivatives, transformed into spiro[cyclohexa-2,5-dien-1,3′-indoline]-2′,4-diones via 6-chloro-spiro[cyclohex-2-en-1,3′-indoline]-2′,4-dione intermediates. The reduction of spiro[cyclohexa-2,5-dien-1,3′-indoline]-2′,4-diones gave spiro[cyclohexane-1,3′-indoline]-2′,4-diones 7. Using a ‘one pot reaction’, starting from 1 and 2, compounds 7 were obtained in satisfactory overall yield.     

Efficient synthesis of new chiral 1,2-benzothiazin-3-one 1,1-dioxide derivatives via lateral lithiation of 3-N-mesitylenesulfonyl-1,3-oxazolidin-2-ones

Chiral 3-N-mesitylenesulfonyl-1,3-oxazolidin-2-ones 4a-e derived from (l)- and (d)-amino acids 1a-e undergo lateral lithiation with lithium diisopropylamide and TMEDA in anhydrous THF to provide new optically-active 1,2-benzothiazin-3-one 1,1-dioxide derivatives 5a-e with yields ranging from 63% to 79%.     

Novel and efficient approach to (Z)-4-trifluoroethylidene-1,3-dioxolane derivatives via (trifluoromethyl)ethynylation of ketones and aldehydes

Perfluoroalkylated 4-trifluoroethylidene-1,3-dioxolanes 2a-p were prepared in quantitative yields from the reaction of new stable (trifluoromethyl)ethynylation reagent 1a with TBAF at −15 °C for 10 min, followed by treatment with phenyl perfluoroalkylated ketones at room temperature. The use of aldehydes under the same reaction condition afforded 1,3-dioxolanes 2q-r in good yields. The reaction of 1a with TBAF, followed by treatment with aldehydes or ketones at −15 °C for 10 min and then with trifluoroacetophenone at room temperature provided 1,3-dioxolane derivatives 2s-t in good yields. Tetrabutylammonium trifluoropropynylide [II] was treated with benzaldehyde derivatives at −15 °C for 10 min, followed by treatment with trifluoroacetophenone, to give the corresponding 1,3-dioxolanes 2u-z and 1,3-dioxines 3u-z with different reaction condition.     

Three-component synthesis of 5:6 and 6:6 fused pyrimidines using KF-alumina as a catalyst

A series of fused pyrimidine derivatives were synthesized by the three-component reaction of an aryl aldehyde, urea, or guanidine in ethyl alcohol/dioxane in presence of 1-methyl-1H-pyrrol-2(3H)-one 1, 1-methylpiperidin-2-one 2, 1-methylindolin-2-one 3, or 1,3-dimethyl-dihydropyrimidine-2,4-dione 9 at 80 °C catalyzed by KF-Al₂O₃. For example, when 1-methyl-1H-pyrrol-2(3H)-one 1, arylaldehyde 4, and urea 5 were treated with KF-Al₂O₃ in ethyl alcohol at 80 °C for 3-5 h, we obtained pyrrolo[2,3-d]pyrimidine derivatives in good yield.     

Preparation of 4-trifluoroethylidene-1,3-dioxolane derivatives via new stable (trifluoromethyl)ethynylation reagent

Perfluoroalkylated 4-trifluoroethylidene-1,3-dioxolane derivatives 2a-q were prepared in excellent yields from the reaction of new stable (trifluoromethyl)ethynylation reagent 1a with 1.3 equiv. of TBAF at −15°C for 10 min, followed by treatment with 2 equiv. of phenyl perfluoroalkylated ketone derivatives at room temperature. The reaction of 1a with 1.3 equiv. of TBAF, followed by treatment with 1 equiv. of aldehyde or ketone at −15°C for 10 min and then with trifluoroacetophenone (1 equiv.) at room temperature afforded perfluoroalkylated 4-trifluoroethylidene-1,3-dioxolane derivatives 2t-u in moderate yields.     

A convenient one-pot synthesis of 2-(trifluoromethyl)-3,4,7,8-tetrahydro-2H-chromen-5(6H)-one derivatives and their further transformations

The trifluoromethyl containing heterocycles, 2-hydroxy-4-aryl-3-(thien-2-oyl)-2-(trifluoromethyl)-3,4,7,8-tetrahydro-2H-chromen-5(6H)-one derivatives 4, were synthesized via a one-pot three-component reaction of aldehyde 1 with 1,3-cyclohexanedione 2 and 4,4,4-trifluoro-1-(thien-2-yl)butane-1,3-dione 3 in the presence of a catalytic amount of Et₃N. The effect of bases and solvents on the reaction efficiency and yield was briefly investigated. Treatment of 4 with an excess amount of NH₄OAc in ethanol afforded 2-trifluoromethyl-1H-quinolin-5-one derivatives 5. Refluxing of 4 with TsOH in CHCl₃ gave the corresponding dehydrated products 8.     

Study on the reactions of fluoroalkanesulfonyl azides with indole derivatives

The reactions of fluoroalkanesulfonyl azides 1 with different indole derivatives have been studied in detail. Treatment of 1 with equimolar amount of 1,3-dimethylindole 3 in 1,4-dioxane at room temperature afforded 2-(1,3-dimethyl-1,3-dihydro-indolinylidene) fluoroalkanesulfonylimines 5 in moderate to good yields. However, under the same reaction conditions, in the case of 1 with 1,2-dimethylindole 4, the corresponding 2-fluoroalkanesulfonyl (1,2-dimethyl-1H-indol-3-yl)-amide 6 was obtained in moderate yields. In addition, the reactions of 1 and indole 7 gave different products under different conditions. Possible mechanisms of these reactions were proposed.     

Intramolecular hetero-Diels-Alder reaction of 1-oxa-1,3-butadienes with terminal acetylenes in aqueous media using CuI

A new method for the preparation of tetracyclic uracils (oxa-helicene) 4 was developed. The intramolecular hetero-Diels-Alder reaction of 1-oxa-1,3-butadiene 3 and an unactivated alkyne in the presence of CuI led to tetracyclic uracils 4 in aqueous media with good yields. The 1-oxa-1,3-butadiene 3 was prepared through Knoevenagel reaction of O-propargylated salicylaldehyde derivatives and barbituric acid or 1,3-dimethylbarbituric acid.     

Access to the syntheses of sydnonyl-substituted α,β-unsaturated ketones and 1,3-dihydro-indol-2-ones by modified Knoevenagel reaction

A convenient method for the preparation of sydnonyl-substituted α, β-unsaturated ketones, based on Knoevenagel condensation, is presented. Although well known, this reaction has never been utilized in the condensation involving sydnone derivatives. Thus, 3-aryl-4-formylsydnones (1) are reacted with active methylene compounds such as acetylacetone (2a), ethyl acetoacetate (2b), diethyl malonate (2c), malononitrile (4a), ethyl cyanoacetate (4b) and cyanoacetamide (4c) by modified Knoevenagel condensation to afford multifunctional derivatives. Also, sydnonyl-substituted 1,3-dihydro-indol-2-one derivatives 10 were synthesized successfully by condensing 3-aryl-4-formylsydnones (1) with oxindoles 9.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

A novel strategy for the expeditious synthesis of aryl-tethered highly congested 2-hydroxybenzyl alcohols from 2-pyranones

An efficient and simple synthesis of highly congested 2-benzyloxy-3-benzyloxymethyl-5-sec-aminobiphenyl-4-carbonitriles 3a-e has been delineated through base catalyzed ring transformation of 6-aryl-4-sec-amino-2H-pyran-2-one-3-carbonitriles 1 by 1,3-bisbenzyloxypropan-2-one 2. Debenzylation of both the O-benzyl groups of 3a-e with boron trichloride provided the corresponding diols, 2-hydroxy-3-hydroxymethyl -5-sec-aminobiphenyl-4-carbonitriles 4a-e in very good yields.     

Synthetic studies towards 4,10-diaza-1,7-dioxaspiro[5.5]undecanes: access to 3-aza-6,8-dioxabicyclo[3.2.1]octan-2-one and 2H-1,4-oxazin-3(4H)-one frameworks

Synthetic approaches towards 4,10-diaza-1,7-dioxaspiro[5.5]undecanes starting from 1,3-dichloroacetone and solketal derivatives are explored. The method relies on the preparation of a key bis-substituted dihydroxy-protected oxime, which would undergo a final acidic deprotection-spiroacetalization process. Although the desired diazaspiroketal framework could not be obtained, our conditions led to the unexpected 3-aza-6,8-dioxabicyclo[3.2.1]octan-2-one 18 or to the oxazinone 32 in good yields.     

The reaction of 4-amino-2-oxazolines with isocyanates and isothiocyanates. Synthesis and X-ray structures of polysubstituted 2-imidazolidinones, 1,3-oxazolidines and 1,3-thiazolidines

Reactions of 4-alkylamino-2-phenyl-2-oxazolines 1 with isocyanates and isothiocyanates provide unprecedented efficient and regioselective heterocycle-heterocycle transformations. Compounds 1 reacted rapidly with tosyl isocyanate yielding directly 3-alkyl-4-benzamido-1-tosyl-2-imidazolidinones 4 in almost quantitative yields. The corresponding ureido intermediates 2 were not isolable species. However, the reactions with non-sulfonylated isocyanates or isothiocyanates were slower, leading to the expected ureido and thioureido derivatives 5, which were easily and efficiently transformed to either polysubstituted 2-imino-1,3-oxazolidine or 2-imino-1,3-thiazolidine hydrochlorides 7, respectively, by treatment with hydrochloric acid. The possible reasons for this disparity in chemical behaviour are discussed. X-ray crystallographic structures for 4-benzamido-3-methyl-1-tosyl-2-imidazolidinone 4b, 4-[1-isopropyl-3-(4-nitrophenyl)ureido]-2-phenyl-2-oxazoline 5e, (Z)-3-benzyl-4-benzamido-2-phenylimino-1,3-oxazolidine hydrochloride 7a and (Z)-3-benzyl-4-benzamido-2-phenylimino-1,3-thiazolidine hydrochloride 7b have been determined.     

A convenient synthesis of new pyrido[3,2-e][1,4]diazepine-2,5-diones and pyrido[2,3-e][1,4]diazepine-2,5-diones

A convenient synthesis of a series of pyrido[3,2-e][1,4]-diazepine-2,5-diones 8 and pyrido[2,3-e][1,4]diazepine-2,5-diones 9, is reported using the condensation of α-amino acid methyl ester derivatives with 1H-pyrido[3,2-d][1,3]oxazine-2,4-dione and 1H-pyrido[2,3-d][1,3]oxazine-2,4-dione. Compounds 8 and 9 were also synthesized by peptide coupling of α-amino acid methyl ester derivatives with β-amino acids (2 or 3) followed by the cyclisation in tetrahydrofuran with sodium hydride (NaH).     

Palladium-catalyzed carbonylative coupling of pyridine halides with aryl boronic acids

The carbonylative Suzuki cross-coupling of a variety of mono-iodopyridines and bromopyridines (1a,b, 3a-c, 5) catalyzed by palladium-phosphane systems has been studied to prepare benzoylpyridine derivatives (2, 4, 6). The selectivity and the rate of the reaction are highly dependent on the reaction conditions, i.e. nature of the palladium catalyst precursor, solvent, temperature and CO pressure. The main side-products arise from direct, non-carbonylative cross-coupling. Under optimized conditions, benzoylpyridines are recovered in high yields (80-95%). The order of reactivity decreases from iodo- to bromopyridines and from 2-, 4- to 3-substituted halopyridines. The reactivity of dihalopyridines has been investigated; 2,6-dibromopyridine (7) and 3,5-dibromopyridine (11) are selectively transformed into either the corresponding benzoyl-phenylpyridine (8, 12) or the corresponding dibenzoylpyridine (9, 13). Dissymmetric 2,5-dihalopyridines (15a,b) are transformed into 2-benzoyl-5-bromopyridine (16) or 2,5-dibenzoylpyridine (17) in high yields.     

Efficient synthesis of N-benzyl-3-aminopyrrolidine-2,5-dione and N-benzyl-3-aminopyrrolidin-2-one

Reaction of N-tert-butyloxycarbonylasparagine (Boc-Asn) with 2 equiv of benzyl bromide in presence of cesium carbonate led to N-benzyl-3-Boc-amino-pyrrolidin-2,5-dione 1a (N-benzyl-3-Boc-aminosuccinimide). Borane dimethylsulfide reduced 3-Boc-aminopyrrolidine-2,5-dione 1a into 3-Boc-aminopyrrolidin-2-one 2a. The same procedure could also be used to prepare derivatives 1 and 2 substituted on the aromatic ring.     

An expeditious synthesis for γ-carboline analogue 4-aryl-1,3-thiazino[6,5-b]indole derivatives via the trifluoromethanesulfonic acid-promoted isomerization of 3-amidomethylthioindole intermediates to 2-indolyl sulfides

A highly efficient trifluoromethanesulfonic acid-mediated rearrangement of the benzoylaminomethylthio group of 3-benzoylaminomethylthioindoles (7a-e) to position 2 of the indole ring was developed. Thus, 2-benzoylaminomethylthioindoles (9a-e) were obtained in good yields and were involved as key intermediates in the synthesis of the new γ-carboline analogue ring system: 2,9-dihydro-4-aryl-1,3-thiazino[6,5-b]indole derivatives (11a-e). The target thiazinoindoles (11a-e) were prepared via 2-thiobenzoylaminomethylindoles (10a-e) in modified Bischler-Napieralski reactions.     

[4+2] Cycloaddition of 1-phosphono-1,3-butadiene with azo- and nitroso-heterodienophiles

Under microwave activation, diethyl 1-phosphono-1,3-butadiene (1) reacted with t-butyl azodicarboxylate (2) and o-nitrosotoluene (5) to furnish quantitatively [4+2] cycloadducts, 3-phosphono-3,6-dihydro-1,2-pyridazine (3) and 6-phosphono-3,6-dihydro-1,2-oxazine (6), respectively. Selective oxidation and/or reduction of 6 led to functionalized δ-aminophosphonic derivatives in cyclic (7, 8) and aliphatic series (9, 10). Intermediate 10 may be cyclized into 2-phosphono-2,5-dihydro-1-pyrrole (12).     

Specific features of the reactions of quinazoline and its 4-hydroxy and 4-chloro substituted derivatives with C-nucleophiles

Reactions of quinazoline 1 with indole, pyrogallol and 1-phenyl-3-methylpyrazol-5-one in the presence of acid led to C-4 adducts 2, 3 and 5. Adduct 4 is formed by heating 1 with 1,3-dimethylbarbituric acid without acid catalysis. 1-Phenyl-3-methylpyrazol-5-one reacts with 1 without acid catalysis to form dipyrazolylmethane 6. 4-Chloroquinazoline 8 reacts with 1-phenyl-3-methylpyrazol-5-one to form 4-(1-phenyl-3-methyl-5-oxopyrazol-4-yl) quinazoline 9 and dipyrazolylmethane 6. Heating 8 with 2-methylindole leads to the formation of 4-(2-methylindol-3-yl) quinazoline 10 and tris(2-methylindol-3-yl)methane 11.     

Lithiation of 2-(chloroaryl)-2-methyl-1,3-dioxolanes and application in synthesis of new ortho-functionalized acetophenone derivatives

2-(4-Chlorophenyl)-2-methyl-1,3-dioxolane 2a was lithiated ortho to the ketal group by treatment with butyllithium in THF at 0°C. Related 2-aryl-2-methyl-1,3-dioxolanes possessing a chlorine substituent at the meta position of the aryl group 2b,c were lithiated with butyllithium in THF at −78°C at the position between the two directing groups. The lithio species thus generated were treated with various electrophiles to give ortho-functionalized acetophenone derivatives.