Synthesis of substituted tetralones as intermediates of CNS agents via palladium-catalyzed cross-coupling reactions

A series of substituted tetralones as intermediates of CNS agents has been synthesized via Pd-catalyzed coupling reactions of 3-(methoxycarbonyl)-1,2,3,4-tetrahydro-1-oxonaphthalen-6-yl trifluoromethanesulfonate (5) with a variety of organometallic reagents.     

Synthesis and characterization of X-shaped oligo(para-phenylene)derivatives functionalized with fluorene ethynylene

<正>A series of linear and X-shaped oligo(para-phenylene) derivatives functionalized with fluorene ethynylenes 1,3 and 4 were synthesized through sequent Sonogashira coupling and Suzuki-Miyaura reaction in high yield.The electron-donating group-OCH_3 and electron-withdrawing counterparts-CF_3 were introduced to tune the spectra properties of compounds 3 and 4.The detail investigation of their photophysical properties in solution and film indicated that the introduction of both -OCH_3 and -CF_3 makes maximum emission distinct red-shift in comparison with parent compound 1,but the latter more prominently.     

Carbazole-linked porphyrin dimers for organic light emitting diodes: synthesis and initial photophysical studies

Carbazole linked porphyrin dimers were synthesized in good yields via stepwise Suzuki coupling reactions using bromoporphyrins and borylated carbazoles as the precursors, the latter of which were synthesized via known procedures from biphenyl derivatives. For comparative purposes porphyrin-carbazole monomers were synthesized. Single layer organic light emitting diodes (OLEDs) were created to demonstrate the optical properties of these materials. Light emission from these carbazole substituted porphyrins showed better results compared to previously examined bromo substituted porphyrins with better electroluminescence and lower turn-on voltages. Dimers exhibited turn-on voltages of 3 V compared to 6 V for monomeric porphyrin-carbazoles.     

Synthesis of a highly soluble superstructured phenanthroline strapped porphyrin

A highly soluble phenanthroline strapped porphyrin is prepared on multigram scale by appropriate functionalization with C₁₂ chains after the cyclization of the tetrapyrrolic macrocycle.     

Experimental design and measurement uncertainty in ligand binding studies by affinity capillary electrophoresis

In all life sciences ligand binding assays (LBAs) play a crucial role. Unfortunately these are very error prone. One part of this uncertainty results from the unavoidable random measurement uncertainty, another part can be attributed to the experimental design. To investigate the latter, uncertainty propagation was evaluated as a function of the given experimental design. A design space including the normalized maximum response range (nMRR), the data point position (DPP), the data point range (DPR) and the number of data points (NoDP) was defined. Based on ten measured ms ACE source data sets 20 specific parameter sets were selected by Design of Experiments. Monte Carlo simulations using 100 000 repeats for every parameter set were employed. The resulting measurement uncertainty propagation factors (measurement uncertainty multiplier: MUM) were used to describe the whole design space by polynomial regression. The resulting 5‐dimensional response surface was investigated to evaluate the design parameter's influence and to find the minimal uncertainty propagation. It could be shown, that the nMRR is of highest importance, followed by DPP and DPR. Interestingly, the NoDP is less relevant. However, the interactions of the four parameters need to be carefully considered during design optimization. Using at least five data points which cover over 40% of the upper part of the binding hyperbola (DPP > 0.57) the MUM will be minimized (MUM approximately 1.5) when the nMRR is appropriate. It is possible to reduce the measurement uncertainty propagation more than one order of magnitude.     

Synthesis and photophysical properties of tetrafluorophenyl-modified carbazole oligomers

A series of tetrafluorophenyl-modified oligo(3,6-carbazole ethynylene)s (CfCzCf, CfCz2Cf, CfCz3Cf, (CfCz)2Cf, and Cf2CzCf2) were synthesized by a Pd/Cu-catalyzed Sonogashira coupling reaction and fully characterized. Their photophysical and electronic properties as well as their thermal stabilities were investigated. It is noteworthy that these tetrafluorophenyl modified compounds showed relative thermal stabilities and low-lying HOMO levels ranging from −5.54 to −5.60 eV, which might be the promising candidates for hole-transporting materials in OLEDs.     

Meso-substituted porphyrin photosensitizers with enhanced near-infrared absorption: Synthesis,characterization and biological evaluation for photodynamic therapy

Porphyrin derivatives are widely explored and used in photodynamic therapy, for their marvelous therapeutic properties. In order to fill in the gaps of insufficient photosensitizers with near-infrared absorption, three porphyrin molecules, 5,10,15,20-tetrakis(3,4-bis(2-(-2-(2-hydroxyethoxy)ethoxy)ethoxy)benzyl)zinc porphyrin(P1), 5,15-bis(3,4-bis(2-(-2-(2-hydroxyethoxy)ethoxy)ethoxy)benzyl)-10,20-bis(2-(2-(2-(4-ethynylphenoxy)ethoxy)ethoxy)ethanol)zincporphyrin(P2),5,15-bis(3,4-bis(2-(-2-(2-hydroxyethoxy)ethoxy)ethoxy)benzyl)-10,20-N,N-dibutyl-4-ethynylaniline zinc porphyrin(P3), were designed and synthesized targeting for more efficient cancer treatment. Excellent photophysical properties were illustrated by UV–vis absorption and emission spectra with enhanced absorbance between 650 and 750?nm and fluorescence emission within 600–800?nm. Besides, with high ¹O₂ quantum yield, especially P2 (0.89), all porphyrins were further evaluated in vitro by 3-(4, 5-dimethyl-2-thiazolyl)-2, 5-diphenyl-2-H-tetrazolium bromide (MTT) assay against Hela cells and exhibited negligible dark toxicity and robust phototoxicity. Fluorescence confocal laser microscopy confirmed cellular uptake and diffusion of these porphyrins, therefore demonstrated their potential and promising applications in photodynamic therapy.     

Selective alkylation and Suzuki coupling as an efficient strategy for introducing functional anchors to the ethylene-bis(indenyl) ligand

Chiral ansa-ethylene-bis(indenyl)-metal complexes, EBI-MX₂, are useful pre-catalysts for a wide variety of reactions, including hydrogenations, hydrosilylations, and polymerization reactions. In order to immobilize these complexes onto heterogeneous supports, a new methodology was developed to introduce functional anchors to the ethylene-bis(indenyl) ligand, EBI. This was accomplished by selective alkylation of indene to form toluene-4-sulfonic acid 2-(3H-inden-1-yl)-ethyl ester, which was then used to alkylate 6-bromoindene. The selective introduction of an aryl bromide then undergoes coupling reactions with aryl borates via the Suzuki coupling to efficiently introduce an alkenyl or alcohol, functional anchor in a simple four step synthesis.     

Isothermal titration microcalorimetric method for studying the combined ligand binding with application to the binding of ethylurea and (N,N)dimethylurea on urease

A simple, novel method was introduced for determining equilibrium constants and enthalpies of binding of two different competitive ligands on a macromolecule by isothermal titration microcalorimetry technique. This method was applied to the simultaneous binding of ethylurea (I) and (N,N)dimethylurea (X), on jack-bean urease at pH 7.0 (tris-base; 30 mM) at 27°C. The dissociation equilibrium constants measured by this method were markedly consistent with inhibition constants obtained from assay of enzyme activities in the presence of I and X.     

Synthetic strategies and porphyrin building blocks for unsymmetrical multichromophores

A sequential use of halogenation, S_NAr, Sonogashira and/or Suzuki couplings together with the use of either mono-5-, 5,15- or 5,10-di-meso-substituted porphyrins allows the facile construction of unsymmetrical porphyrin dimers and trimers with different spatial orientation. The protocols established allow a convenient entry into multichromophores suitable for application in nonlinear optics and biomedicine.     

Synthesis and spectroscopic properties of 1,3,5-tris(arylalkynyl)-2,4,6-trimethoxybenzenes

A number of C₃-symetric 1,3,5-tris(arylalkynyl)-2,4,6-trimethoxybenzenes which carry electron withdrawing aryl substituents at the acetylenic periphery and donating methoxy groups on the central benzene ring are prepared via Sonogashira coupling. The utility of two different synthetic routes is evaluated as well as the effect of the nature of the aryl and ethynyl starting compounds in the coupling reaction. Finally, a correlation between the substitution pattern of the alkynyl compounds and their UV-vis and fluorescence spectroscopic properties is established.     

Comparison between polyethylenglycol and imidazolium ionic liquids as solvents for developing a homogeneous and reusable palladium catalytic system for the Suzuki and Sonogashira coupling

The carbapalladacycle complex of 4-hydroxyacetophenone oxime is a highly active palladium catalyst to effect the Suzuki coupling of aryl chlorides and other C-C forming reactions in water. In an attempt to develop a reusable, homogeneous system based on this complex, its stability against prolonged heating in different ionic liquids and polyethylenglycol (PEG) has been studied. It was found that the palladium complex decomposes in water, 1-butyl-1-methylimidazolium hexafluorophosphate and 1-butyl-1-methylimidazolium chloride to form palladium nanoparticles in the first two cases and PdCl₄²⁻ in the third case. In contrast, this cyclic palladium complex was stable upon extended heating in 1-butyl-2,3-dimethylimidazolium hexafluorophosphate and in PEG. The activity of this complex for the Suzuki and Sonogashira correlates with the stability of the complex, the activity in PEG being higher than any of the ionic liquids tested. Although the carbapalladacycle complex also decomposes in PEG upon reaction, the resulting Pd nanoparticles (2-5 nm size) are stabilized by PEG acting as ligand. In this way, a reusable, homogeneous system in PEG has been developed that is able to effect the Suzuki and Sonogashira couplings without the need of copper and phosphorous ligands, working at the open air.     

Synthesis, optical, electrochemical, and thermal properties of conjugated α-fluorenyl oligothiophenes

A series of new α-fluorenyl oligothiophenes up to the pentamer have been synthesized using Suzuki cross-coupling and bromination reactions. The optical, electrochemical, and thermal properties of these materials can be tuned by varying the number of thiophene rings. The longer oligomers (n ? 4) were stable, crystalline, and unreactive to electrochemical oxidative dimerization.     

Microwave-assisted functionalization of bromo-fluorescein and bromorhodamine derivatives

The overall goal of this project was to develop methodologies that would allow organometallic couplings of fluorescein and rhodamine derivatives. Consequently, borylation, Suzuki, and Sonogashira reactions of fragments derived from compounds 1 and 2 were investigated. Conventional and microwave heating were compared throughout the study.     

金原子簇催化碳——碳偶联反应的研究进展

Well-defined gold nanoclusters have been documented as new and promising materials in the field of nanoscience. They have been well explored for the nanocatalysis of reactions like selective oxidation and hydrogenation, carbon-carbon coupling, etc. These Au nanoclusters possess unique electronic properties and crystal structure, which provide an excellent opportunity to correlate atomic structure with intrinsic catalytic property and to investigate the mechanisms of reactions over Au nanoclusters. In this review, we generalize the catalytic application of gold nanoclusters in carbon-carbon coupling reactions, including Ullmann, Sonogashira, Suzuki, and A³-coupling reactions. Herein, we have discussed ligand engineering (e.g., aromatic and aliphatic thiolate) as well as the effect of metal dopants (e.g., Cu, Ag, Pt, and Pd). Finally, the tentative catalytic mechanisms and the structure-performance relationships were discussed at the atomic level, which will give some clue for the design of efficient gold cluster catalysts.     

Synthesis and structural characterization of palladium(II) 2-(arylazo)naphtholate complexes and their catalytic activity in Suzuki and Sonogashira coupling reactions

Abstract

A family of five palladium(II) 2-(arylazo)naphtholate complexes, [PdCl(PPh₃)(L)] (L?=?O, N-donor of bidentate 2-(arylazo)naphtholate ligands), have been synthesized and characterized by elemental analysis and spectral (FT-IR, UV–Vis, ¹H-NMR and ¹³C-NMR) methods. Further, the catalytic efficiency of all the complexes have been investigated for Suzuki and Sonogashira coupling reaction of various aryl halides.     

Synthesis of substituted 2-phenylhistamines via a microwave promoted Suzuki coupling

Substitutions on the 2-position of the imidazole ring of histamine have proven useful in a number of biochemical settings. Current art for the synthesis of these constructs relies upon a cumbersome and low-yielding condensation reaction. Here-in we report a new procedure for the synthesis of a series of substituted 2-phenylhistamines utilizing a microwave-promoted Suzuki coupling.     

Sulfilimine palladacycles: stable and efficient catalysts for carbon-carbon coupling reactions

A new family of sulfilimine-based palladacycles (1-4) has been synthesized in high yields from easily accessible starting materials and is found to exhibit high catalytic activities for carbon-carbon bond-formation in Suzuki, Heck, Sonogashira and Ullmann-type reactions, affording coupled products in excellent yields.     

Synthesis and properties of novel extended BODIPYs with rigid skeletons

Novel extended BODIPYs fused with bicyclo rings were synthesized from bicyclopyrroles by combining Knoevenagel condensation, Suzuki coupling, and O-chelation. The absorption maxima of the BODIPYs ranged from the visible to near-infrared region and the compounds showed good solubility in organic solvents. The solubility of the bicycloBODIPY with 2-naphthyl groups at the α-position of the pyrrole units was particularly high. Heating converted distyrylBODIPY with bicyclo[2.2.2]octene to benzoBODIPY with absorption (748.5?nm) and fluorescence (775.0?nm) in the near-infrared region.     

功能化MCM-41负载双齿氮钯催化剂的制备及其在Suzuki偶联中的应用

首先胺功能化修饰介孔材料MCM-41,再与二-(吡啶-2-基-)甲酮缩合成席夫碱,最后通过Pd(OAc)2配位制备了MCM-41负载双齿氮钯配合物,采用X射线衍射(XRD)以及X射线光电子能谱(XPS)对其结构表征.该负载催化剂在以二甲苯为溶剂,K2CO3为碱以及n-Bu4NF用作添加剂的Suzuki偶联中表现出优越的催化性能.