Palladium-catalyzed Hiyama cross-coupling reactions of aryl mesylates

The combination of palladium acetate with XPhos shows high efficiency in the Hiyama cross-coupling reactions of aryl mesylates with arylsilanes. The reactions proceed smoothly to generate the corresponding biaryl compounds in good yields.     

Pyrazole-tethered phosphine ligands for Pd(0): useful catalysts for Stille, Kumada and Hiyama cross-coupling reactions

Combination of 3,5-dimethyl-1-(2-(diphenylphosphino)phenyl)-1H-pyrazole, A, and 3-tert-butyl-5-methyl-1-(2-(diphenylphosphino)phenyl)-1H-pyrazole, B, with Pd₂(dba)₃ furnished excellent catalysts for Stille, Kumada and Hiyama cross-coupling reactions. Effects of solvents, bases and ligand/palladium ratio on efficiency of coupling reactions were studied. Molecular structures of palladium(II) complexes of A and B determined by single-crystal X-ray diffraction method revealed a close similarity of ligand arrangement around the metal centre.     

Solid-supported cross-coupling catalysts derived from homogeneous nickel and palladium coordination complexes

Solid-supported catalysts derived from homogeneous nickel(II) and palladium(II) non-symmetrical salen-type coordination complexes have been prepared and shown to be effective in the heterogeneous catalysis of carbon-carbon cross-coupling reactions. The nickel catalyst has been used in room-temperature Tamao-Kumada-Corriu reactions and the palladium catalyst in the Heck reaction at elevated temperatures. The complexes were prepared by improved methods and characterised by spectroscopic techniques. Comparisons between the solid-supported catalysts and their homogeneous analogues are reported. The single-crystal structure determination of the nickel and palladium complexes [M(salenac-OH)][M = Ni, Pd; salenac-OH = 9-(2',4'-dihydroxyphenyl)-5,8-diaza-4-methylnona-2,4,8-trienato](2-)] is reported.     

Hiyama cross-coupling of arenediazonium salts under mild reaction conditions

Palladium acetate [Pd(OAc)(2)]-catalyzed Hiyama cross-coupling of arenediazonium salts with organosilanes was found to generate biaryl products in high yields in alcoholic solutions. The simple and efficient protocol does not require any bases, ligands, or air/moisture. The transformation can tolerate either electron-donating or electron-withdrawing functional groups. Theoretical studies show that the transmetalation is the rate-limiting step for the cross-coupling reaction and both acetate and tetrafluoroborate anions may be involved in the direct reaction with the silicon atom.     

Palladium-catalyzed Hiyama cross-coupling of aryltrifluorosilanes with aryl and heteroaryl chlorides

An efficient, palladium-catalyzed Hiyama cross-coupling reaction of aryltrifluorosilanes with aryl chlorides has been developed. A wide variety of functionalized biaryl derivatives were isolated in good to excellent yields. The scope of this reaction has also been extended to heteroaryl chlorides, affording the corresponding heterobiaryl compounds in high yields.     

Direct Hiyama cross-coupling of enaminones with triethoxy(aryl)silanes and dimethylphenylsilanol

2,3-Dihydropyridin-4(1H)-ones undergo direct C-H functionalization at C5 in the palladium(II)-catalyzed Hiyama reaction, using triethoxy(aryl)silanes and dimethylphenylsilanol. The reagent CuF(2) has a dual role in the reactions with triethoxy(aryl)silanes. It is a source of fluoride to activate the silane in the Hiyama reaction and also serves as the reoxidant to convert Pd(0) to Pd(II) in the catalytic cycle.     

Microwave-assisted Stille and Hiyama cross-coupling reactions catalyzed by ortho-palladated complexes of homoveratrylamine

The activity of dimeric [Pd{C₆H₂(CH₂CH₂NH₂)-(OMe)₂-3,4}(μ-Br)]₂ and monomeric [Pd{C₆H₂(CH₂CH₂NH₂)-(OMe)₂-3,4}Br(PPh₃)] complexes as efficient, air, and moisture tolerant catalysts was investigated in Stille and Hiyama cross-coupling reactions of various aryl halides. Substituted biaryls were produced in excellent yields in short reaction times using these complexes. The monomeric complex had been demonstrated to be more active than the corresponding dimeric catalyst for the cross-coupling of some of aryl bromides and unreactive aryl chlorides. The combination of homogenous metal catalyst, microwave irradiation, and microwave-active polar solvents gave high yields of products in short reaction times.     

Ferrocenylimidazoline palladacycles: efficient phosphine-free catalysts for Suzuki-Miyaura cross-coupling reaction

A series of new ferrocenylimidazoline ligands 5 with different substituents in the imidazoline ring and their corresponding cyclopalladated complexes 6 were synthesized. Chloride-bridged palladacycle dimers 6, which are thermally stable and insensitive to air and moisture, have been evaluated as effective phosphine-free catalysts for the Suzuki reaction of aryl bromides with arylboronic acid. The catalyst 6b presents the highest efficiency in the coupling processes for less reactive 2-bromothiophene. Moreover, the reactions can be carried out at room temperature under aerobic conditions to give the corresponding biaryls in high yields. Additionally, the triphenylphosphine adduct of cyclopalladated ferrocenylimidazoline 7a was structurally characterized by single-crystal X-ray diffraction.     

Copper-catalyzed Suzuki cross-coupling using mixed nanocluster catalysts

A small library of copper and noble metal nanoclusters is designed and synthesized. These clusters are tested as catalysts in the Suzuki cross-coupling of various aryl halides with phenylboronic acid. It is found that copper and copper/noble metal combination nanoclusters are active catalysts for this reaction, the most active being the combined copper/palladium clusters. Iodo-, bromo-, and chloroarenes can be used. In the case of p-nitrobromobenzene, a one-pot cross-coupling and selective hydrogenation is achieved.     

Ferritin-supported palladium nanoclusters: selective catalysts for aerobic oxidations in water

Confinement of nanometallic Pd within the core of a hyperthermophilic ferritin cage (from Pyrococcus furiosus) is reported. The resulting nanostructured hybrid catalysts can be used for highly specific aerobic oxidation of alcohols in water.     

Efficient nickel/N-heterocyclic carbene catalyzed C-S cross-coupling

The cross-coupling reaction of aryl halides with aliphatic and aromatic thiols catalyzed by readily available Ni(OAc)₂ with N-heterocyclic carbene (NHC) is reported. Ni(OAc)₂/NHC catalyst showed good activities toward various aryl halides in C-S coupling reaction, even with aryl chlorides. Reactions occurred in excellent yields, broad scope, and high tolerance of functional groups.     

Surfactant-free synthesis of palladium nanoclusters for their use in catalytic cross-coupling reactions

Surfactant-free Pd nanoclusters (Pd NCs) (size: 1-1.5 nm) showed high catalytic activity in the Suzuki-Miyaura cross-coupling and Mizoroki-Heck reactions. The Pd NCs had a high turnover number, up to 6.0 × 10(8), which can be recycled at least five times without loss of catalytic activity.     

Monoligated palladium species as catalysts in cross-coupling reactions

Palladium-mediated cross-coupling reactions are attractive organometallic transformations for the generation of C--C, C--N, C--O, and C--S bonds. Despite being widely employed in small-scale syntheses, cross-coupling reactions have not found important industrial applications because until recently, only reactive aryl bromides and iodides could be used as substrates. These substrates are generally more expensive and less widely available than their chloride counterparts. Over the past few years, new catalytic systems with the ability to activate unreactive and sterically hindered aryl chlorides have been developed. The new catalysts are based on palladium complexes that contain electron-rich and bulky phosphine or carbene ligands. The enhanced reactivity observed with these new systems has been attributed to the formation of unsaturated and reactive [PdL] species which can readily undergo oxidative addition reactions with ArX to yield [Pd(Ar)X(L)].     

Hiyama cross-coupling of chloro-, fluoro-, and methoxypyridyltrimethylsilanes: room-temperature novel access to functional bi(het)aryl

The incorporation of chloro, fluoro, or methoxy substituents on the pyridine ring of pyridyltrimethylsilanes allowed us to perform efficient Hiyama cross-coupling with various (het)aryl halides. The reactions proceeded smoothly at room temperature leading to the corresponding functional bis(het)aryl in fair to excellent yields. The presence of pyridine nitrogen alpha to the trimethylsilyl group was requisite to achieve the cross-coupling. [Reaction: see text]     

Unification of anion relay chemistry with the Takeda and Hiyama cross-coupling reactions: identification of an effective silicon-based transfer agent

The unification of Anion Relay Chemistry (ARC) with the Takeda and Hiyama palladium-mediated cross-coupling processes to provide aryl-aryl, alkenyl-aryl, and alkenyl-alkenyl coupled products by exploiting a common silicon-based transfer agent has been achieved. These results provide a practical solution for intermolecular cross-coupling of organolithium reagents without the problematic lithium-halogen exchange and/or undesired homocoupling that has kept organolithium cross-couplings from achieving the same level of utility asother palladium-mediated methods (e.g., Suzuki organoboron, Negishi organozinc, Stille organotin, Kumada organomagnesium, etc.).     

Complex study of nickel skeleton catalysts: V. Study of novel non-pyrophoric nickel skeleton catalysts by derivatograph

The structure and properties of non-pyrophoric skeleton catalysts prepared from NiSi, NiAlSi, NiMg and NiZn alloys have been studied—apart from other thermal methods—by means of the derivatograph.Our experimental results have contributed to the explanation of the non-pyrophoric behaviour of these catalysts. We demonstrated that the desorption of the hydrogen content in our catalysts is not accompanied by the oxidation of active nickel. This oxidation takes place only at higher temperatures, above 200°C, at a rate proportional to the amount of active nickel.Other constituents of the catalysts (adsorbed water, hydroxide content) were also determined from the experimental data. The outstandingly high Mg(OH)₂ content of the NiMg catalyst indicates that its structure is dissimilar: Mg(OH)₂ also acts as support for the catalyst.     

Shell and subshell periodic structures of icosahedral nickel nanoclusters

Using the modified analytic embedded atom method and molecular dynamics, the binding energies and their second order finite differences (stability functions) of icosahedral Ni clusters with shell and subshell periodicity are studied in detail via atomic evolution. The results exhibit shell and subshell structures of the clusters with atoms from 147 to 250,000, and the atomic numbers corresponding to shell or subshell structures are in good agreement with the experimental magic numbers obtained in time-of-flight mass spectra of threshold photoionization, and Martin's theoretical proposition of progressive formation of atomic umbrellas. Clusters with size from 147 to 561 atoms are energetically investigated via one-by-one atomic evolution and their magic numbers are theoretically proved. For medium-size Ni clusters with 561 to 2057 atoms, the prediction of magic numbers with atomic numbers is performed on the basis of umbrella-like subshell growth in near face-edge-vertex order. The similarity of the energy curves makes it possible to extend the prediction to even larger Ni nanoclusters in hierarchical Mackay icosahedral configurations.     

Enantio-differentiating hydrogenation of methyl acetoacetate over modified nickel catalysts: effects of nickel dispersion on the enantio-selectivity of catalysts

Enantio-differentiating hydrogenation of methyl acetoacetate was performed over the supported nickel catalysts modified by the solution of (R,R)-tartaric acid or (S)-malic acid and NaBr. The reduction temperature of supported nickel was the most important factor determining the enantio-selectivity of catalysts. The reduction temperature changed the nickel dispersion, by which the quantity and coverage of modifier adsorption were varied. The enantio-selectivity of modifiers both (R,R)-tartaric acid and (S) -malic acid were compared at various reduction temperatures. (R,R)-tartaric acid with two hydroxyl groups in a molecule showed an optimum coverage on the nickel surface that gave the maximum ee value. The maximum ee value was 72% at the reduction temperature of 973 K. In contrast, (S)-malic acid with one hydroxyl group in a molecule showed a monotonous decrease in ee and decreasing amounts of adsorbed modifier with increasing reduction temperatures.     

Suzuki cross-coupling reaction of fluorobenzene with heterogeneous palladium catalysts

In this work, we accomplished for the first time the Suzuki cross-coupling reaction between fluorobenzene and phenylboronic acid with different heterogeneous catalysts and bases. The conversion values obtained are similar to those provided by homogeneous catalysts and activated aryl fluorides.     

Heterogeneous Suzuki cross-coupling reactions over palladium/hydrotalcite catalysts

The efficiency of various heterogeneous solids consisting of palladium supported on hydrotalcite as catalysts in the Suzuki cross-coupling reaction between bromobenzene and phenylboronic acid was studied. Based on the catalytic activity results, the reaction develops to an acceptable extent with 100% selectivity at moderate temperatures in the presence of some of the catalysts. The best results were provided by a catalyst consisting of an acetate-pyridine complex of Pd supported on hydrotalcite that gave high conversion values even after three reuses. The reactions conditions were very mild (a temperature of 55 degrees C and atmospheric pressure). In fact, the catalyst provided conversion and selectivity results surpassing those of existing heterogeneous phase catalysts and most homogeneous phase catalysts for the same purpose.