Dye-ligand immobilized IPNs membrane for removal heavy metal ions

We have developed a novel approach to obtain high metal sorption capacity utilizing a membrane containing chitosan and an immobilized reactive dye (i.e. Reactive Yellow-2). The composite membrane was characterized by SEM, FT-IR, swelling test, and elemental analysis. The membrane has uniform small pores distribution and the pore dimensions are between 5 and 10 μm, and the HEMA:chitosan ratio was 50:1. The reactive dye immobilized composite membrane was used in the removal of heavy metal ions [i.e., Pb(II), Hg(II) and Cd(II)] from aqueous medium containing different amounts of these ions (5-600 mg l⁻¹) and at different pH values (2.0-7.0). The maximum adsorption capacities of heavy metal ions onto the composite membrane under non-competitive conditions were 64.3 mmol m⁻² for Pb(II), 52.7 mmol m⁻² for Hg(II), 39.6 mmol m⁻² for Cd(II) and the affinity order was Pb(II) > Hg(II)>Cd(II).     

Synthesis of thiol chelating resins and their adsorption properties toward heavy metal ions

A series of chelating resins, derived from a macroreticular styrene-divinylbenzene (2%) copolymer beads grafted with various poly(ethylene glycols) HO? (? CH₂? CH₂? O? )_n? H(n = 0, 4, 9, 13) and containing thiol groups as chelating functions, have been synthesized in a three-step reaction sequence. The structure of the functionalized resins was confirmed by IR spectrophotometry, elemental analysis, and differential scanning calorimetry. The complexation behavior of these thiol resins was investigated towards Hg(II), Cu(II), and Pb(II) ions in aqueous solution by a batch equilibration technique. The influence of pH on adsorption capacity was also examined. The adsorption values for metal ions' intake followed the order Hg(II) > Cu(II) > Pb(II). The affinity of these polymers towards Hg(II) ions was so high that the total mercury level in the liquid decreased from 20 ppm to below 10 ppb after 2 h of treatment. Polymers can be regenerated by washing with a solution of hydrochloric acid (6N) and 10% by weight of an aqueous solution of thiourea. © 1994 John Wiley & Sons, Inc.     

Two-dimensional nanomaterial based sensors for heavy metal ions

Two-dimensional (2D) nanomaterials are promising building blocks for sensors due to their unique physical, chemical, electronic, and optical properties. This review (with 253 references) first summarizes the historical developments of 2D nanomaterials and discusses the advantages of 2D nanomaterials when applied for constructing sensors. Next, their properties are discussed, with subsections on electronic, optical, mechanical and chemical properties. This is followed by an overview on methods for syntheses and the effects of positive and/or negative charges on the properties and in sensing applications. Then, recent advances in 2D nanomaterial-based electrochemical, fluorometric, colorimetric, electrochemiluminescent, photoelectrochemical, and field-effect transistor sensors are discussed. The discussion also includes the preparation of sensing elements, the roles of such nanomaterials, and assay strategies. Finally, on the basis of the current achievements in the field of 2D nanomaterials, the perspectives on the challenges and opportunities for the exploration of 2D nanomaterial-based sensors are put forward.

Open image in new window

Graphical Abstract ?

     

Synthesis and characterization of new fluorinated photoactive polyamides based on xanthene pendant: Evaluation of antibacterial and heavy metal ions removal behavior

A series of novel organosoluble polyamides (PAs) bearing different functional groups such as flexible ether, substituted imidazole, and xanthene rings and electron-withdrawing CF₃ groups were synthesized from diamines and various dicarboxylic acids. The structures of diamines and PAs were fully characterized by elemental analysis, Fourier transform infrared spectroscopy, and proton nuclear magnetic resonance spectroscopy. The PAs showed good solubility in aprotic and polar organic solvents, with high thermal stability exhibiting the glass transition temperatures (T_gs) and 10% weight loss temperatures (T₁₀%) in the range of 184–277°C and 410–480°C in N₂ atmosphere, respectively. These polymers showed fluorescence emission upon irradiation with UV light. Diamine compounds and two of synthesized polymers were also screened for antibacterial activity against gram-positive and gram-negative bacteria, and the obtained results for all four combinations showed good inhibition. Extraction capability for heavy metal ions such as Cr³⁺, Pb²⁺, Hg²⁺, Cd²⁺, and Co²⁺ from aqueous solutions was also tested at 25°C and pH 7–8.     

Lariat-crown ether based fluorescence sensors for heavy metal ions

Exploratory investigations were conducted to probe several aspects of a new strategy for the design of metal ion fluorescence sensors. The results of the investigation show that lariat-crown ethers that contain amine and thioether side chains, and a naphthalene chromophore can be efficiently prepared by using sequences that rely on key single electron transfer promoted photocyclization reactions. Members of this novel family of lariat-crown ethers serve as selective fluorescence sensors for the divalent metal cation of Mg, Hg, and Pb. The response of the sensors to the divalent metal ion is modulated by the nature of the heteroatom(s) incorporated into the side chains. Specifically, lariat-crown ethers that contain tertiary amine groups in their side chains display an off-on type response to Mg(II), Hg(II), and Pb(II). In contrast, thioether side chain containing lariat-crown ethers behave differently in that their fluorescence intensities decrease in the presence of increasing concentrations of these divalent metal cations. These responses can be understood on the basis of selective divalent metal ion induced disruption of intramolecular single electron transfer (SET)-quenching (for side chain amine containing lariat-crown ethers) and the enhancement of intersystem crossing (for side chain thioether containing lariat-crown ethers) of the singlet excited state of the naphthalene fluorophore.     

Chemically modified silica gel for selective solid-phase extraction and preconcentration of heavy metal ions

This paper describes our research on the synthesis of the sorbent with chemically bonded ketoimine groups, and, furthermore, using this sorbent in the SPE technique to extract and preconcentrate trace amounts of metal ions in water samples. Surface characteristics of the sorbent were determined by elemental analysis, NMR spectra for the solid phases (²⁹Si CP MAS NMR), and analysis of pore size distribution of the sorbent and nitrogen adsorption-desorption. The newly proposed sorbent with ketoimine groups was applied for the extraction and preconcentration of trace amounts of Cu (II), Cr (III) and Zn (II) ions from the water from a lake, post-industrial water and purified water unburdened back to the lake. The determination of the transition-metal ions was performed on an emission spectroscope with inductively coupled plasma ICP-OES. For the batch method, the optimum pH range for Cu (II) and Cr (III) extraction was equal to 5, and Zn(II)–to 8. All the metal ions can be desorbed from SPE columns with 10?mL of 0.5?mol?HNO₃. The detection limits of the method were found to be 0.7?µg?L^?1 for Cu (II), 0.08?µg?L^?1 for Cr (III), and 0.2?µg?L^?1 for Zn (II), respectively.     

Preparation of hydrazinodeoxycellulose and carboxyalkyl hydrazinodeoxycelluloses and their adsorption behavior toward heavy metal ions

Nitrogen-containing cellulose derivatives hydrazinodeoxycellulose (HDC) and carboxyalkyl hydrazinodeoxycelluloses (α- and β-CAHDCs) were prepared from 6-chlorodeoxycellulose (CDC). Their adsorption of divalent transition metal ions was determined from dilute aqueous solutions and compared with that of aminoalkyl celluloses (AmACs) reported previously. HDC scarcely adsorbs metal ions in the pH range of 1–2, whereas α- and β-CAHDCs adsorb metal ions in this pH range. However, the adsorption of metal ions on HDC increases rapidly with increasing pH and HDC more effectively adsorbs metal ions than α- and β-CAHDCs in weakly acidic conditions. The ability to adsorb Cu²⁺ ions was in the order of AmAC (carbon number in the diamine moiety m = 2) > HDC > α-CAHDC > β-CAHDC in the weakly acidic region. These adsorbents selectively adsorb Cu²⁺ ions from the solutions containing other metal ions such as Mn²⁺, Co²⁺, and Ni²⁺, and the Irving–Williams series is obeyed in these adsorbent/metal ion systems. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3359–3363, 1997     

Ion-imprinted interpenetrating network gels for solid-phase extraction of heavy metal ions

In the present work, ion-imprinted interpenetrating polymer network (IPN) gels were prepared by free radical/cationic hybrid polymerisation of acrylamide (AAm) and 1,4-butanediol vinyl ether (BVE). These gels were respectively used for separation of Cu²⁺, Ni²⁺ and Zn²⁺ ions in natural water samples. Experimental conditions for effective adsorption of metal ions were optimised with respect to different experimental parameters by column procedures in detail. The optimum pH value for the adsorption of Cu²⁺, Ni²⁺ and Zn²⁺ ions on these sorbents was 6.0. Complete elution of the adsorbed metal ions from the sorbent was carried out using 1.0 mol/L of HCl solution. The optimum sample flow rate and eluent flow rate were, respectively, 1.0 and 0.3 mL/min. Common coexisting ions did not interfere with the separation and determination of the target ions. The accuracy of the proposed method was validated by analysis of the standard reference material (GBW 08301, river sediment). The measured contents of metal ions in the reference material were in good agreement with the certified values. The presented method was successfully applied for the determination of Cu²⁺, Ni²⁺ and Zn²⁺ ions in three different water samples (well water, seawater and waste water).     

Progress and challenges in molecularly imprinted polymers for adsorption of heavy metal ions from wastewater

Molecularly imprinted polymers (MIPs), prepared by the interaction forces such as forming covalent or non-covalent bonds by crosslinkers and initiators, are new types of specific recognition polymers with particular cavities. This is an ideal class of materials for wastewater treatment because of the particular holes left by the elution process. This review discusses the development process, classification, synthesis principles, systems, and polymerization methods of MIPs. At the same time, the adsorption mechanism of Copper (Cu), Mercury (Hg), Chromium (Cr), Silver (Ag), and Lead (Pb) in the MIPs technique are studied. Finally, some suggestions and prospects for the future development of MIPs are also put forward.     

Phosphorylated polyacrylonitrile‐based electrospun nanofibers for removal of heavy metal ions from aqueous solution

The phosphorylated polyacrylonitrile‐based (P‐PAN) nanofibers were prepared by electrospinning technique and used for removal of Cu²⁺, Ni²⁺, Cd²⁺, and Ag⁺ from aqueous solution. The morphological and structural properties of P‐PAN nanofibers were characterized by scanning electron microscope and Fourie transform infrared spectra. The P‐PAN nanofibers were evaluated for the adsorption capacity at various pH, contact time, and reaction temperature in a batch system. The reusability of P‐PAN nanofibers for the removal of heavy metal ions was also determined. Adsorption isotherms and adsorption kinetics were also used to examine the fundamental adsorption properties. It is found that the P‐PAN nanofibers show high efficiency, and the maximal adsorption capacities of metal ions as calculated from the Langmuir model were 92.1, 68.3, 14.8, and 51.7 mg/g, respectively. The kinetics of the heavy metal ions adsorption were found to follow pseudo‐second‐order rate equation, suggesting chemical adsorption can be regarded as the major factor in the adsorption process. Sorption/desorption results reveal that the obtained P‐PAN nanofibers can remain high removal efficiency after four cycles.     

Smart nano-architectures as potential sensing tools for detecting heavy metal ions in aqueous matrices

The discharge of heavy metal ions into water resources as a result of human activities has become a global issue. Contamination with heavy metal ions poses a major threat to the environment and human health. Therefore, there is a dire need to probe the presence of heavy metal ions in a more selective, facile, quick, cost-effective and sensitive way. Conventional sensors are being utilized to sense heavy metal ions; however, various challenges and limitations like interference, overlapping of oxidation potential, selectivity and sensitivity are associated with them that limit their in-field applicability. Hence, nanomaterial based chemical sensors have emerged as an alternative substitute and are extensively employed for the detection of heavy metal ions as a potent analytical tool. The incorporation of nanomaterials in sensors increases their sensitivity, selectivity, portability, on-site detection capability and device performance. Nanomaterial based electrodes exhibit enhanced performance because surface of electrode at nano-scale level offers high catalytic potential, large active surface area and high conductivity. Therefore, this review addresses the recent progress on chemical sensors based on different nanomaterials such as carbon nanotubes (CNTs), metal nanoparticles, graphene, carbon quantum dots and nanocomposites for sensing heavy metals ions using different sensing approaches. Furthermore, various types of optical sensors such as fluorescence, luminescence and colorimetry sensors have been presented in detail.     

Optical fibre SERS sensors

Surface-enhanced Raman scattering (SERS) has established itself as an important analytical technique. However, efforts to transfer the technology from the laboratory to the production line, clinic or field have been frustrated by the lack of robust affordable substrates and the complexity of interfacing between sample and spectrometer. Prompted by the success of optical fibre systems for implementing normal Raman scattering spectroscopy in remote locations and biomedical applications, attention has now shifted to the development of SERS-active optical fibres. Other workers have attempted to develop SERS probes with extended interaction lengths and both far-field and near-field SERS imaging techniques for high-resolution chemical mapping of surfaces. This review discusses the development of these technologies and presents the current state of the art. Although recent developments show great promise, some outstanding challenges and opportunities remain to be addressed.     

Mussel‐inspired method to decorate commercial nanofiltration membrane for heavy metal ions removal

Nanofiltration (NF) membranes have been widely used for the treatment of electroplating, aerospace, textile, pharmaceutical, and other chemical industries. In this work, halloysite nanotubes (HNTs) were directly anchored on the surface of commercial nanofiltration (NF) membrane by dopamine modification following advantageous bio‐inspired methods. SEM and AFM images were used to characterize the HNTs decorated membrane surface in terms of surface morphology and roughness. Water contact angle (WCA) was employed in evidencing the incorporation of HNTs and dopamine in terms of hydrophilicity or hydrophobicity. Augmentation of HNTs was found to obviously enhance the hydrophilicity and surface roughness resulting in improved water permeability of membrane. More importantly, the rejection ratios of membrane also increased during the removal of heavy metal ions from wastewater. The permeability and Cu²⁺ rejection ratio of modified NF membrane were as high as 13.9 L·m^?2·h^?1·bar^?1 and 74.3%, respectively. Incorporation of HNTs was also found to enhance the anti‐fouling property and stability of membrane as evident from long‐term performance tests. The relative concentration of HNTs and dopamine on membrane surface was optimized by investigating the trade‐off between water permeability and rejection ratio.     

Static and dynamic sorption study of heavy metal ions on amino-functionalized SBA-15

Amino-functionalized SBA-15 mesoporous silica (SBA-15-NN) was synthesized using the normal grafting procedure of SBA-15 with [3-(2-Aminoethyl) aminopropyl] trimethoxysilane. Under optimal conditions, SBA-15-NN exhibited a higher adsorption capacity toward metal ions than SBA-15 in static adsorption. The results showed that the flow rate of 2?mL?min^?1 might be the optimum flow rate in dynamic adsorption, and the higher initial metal ion concentration is favorable for the adsorption of Zn(II), Co(II), and Ni(II) onto SBA-15-NN. The results indicated that SBA-15-NN could effectively remove multiple metal ions from aqueous solution as a good adsorption material.     

Biosorption of heavy metal ions by immobilized zoogloea and zooglan

ImmobilizedZoogloea and zooglan in calcium alginate-silica matrix was shown to have a high adsorption capacity for Cu and Cd ions. Our results showed that Cu-ion uptake in the presence of Ca and Mg ions can be enhanced using immobilizedZoogloea and zooglan. Heavy metal ion adsorption efficiency decreased in the following order: Cu > Cd > Zn > Cr. The adsorbed metal ions were desorbed completely using sulfuric acid. ImmobilizedZoogloea and zooglan which was repetitively regenerated adsorbed heavy metal ions without a loss of adsorption capacity.     

A new sensitive and selective sensor for heavy metal ions based on tannin extracted from the skin of Punica granatum L

This article presents the development of a sensor made from a gold electrode and a receiving polymeric membrane based on tannin extracted from the skin of Punica granatum. L (pomegranate) for real-time detection of heavy metals in a hydrous environment. The basic principle of this device is the complexing (chelating) of metal ions through the adjacent hydroxyl groups contained in the chemical structures of the tannins. The electrochemical characterisation was performed by using electrochemical impedance spectroscopy and square wave voltammetry. Other morphological and structural analyses were performed by using Fourier transform infrared spectroscopy and atomic-force microscopy. The results obtained showed the high sensitivity of the developed device (detection limits of 6.35 × 10^?9 g L^?1 for Cu²⁺, 1.1 × 10^?8 g L^?1 for Cd²⁺ and 2 × 10^?7 g L^?1 for Pb²⁺) and the possibility of simultaneously detecting several heavy metals, each one in a highly selective manner with highly acceptable response time (48s).     

Treatment of heavy metal ions in wastewater using layered double hydroxides: A review

Heavy metal ions are toxic, and their toxicities change with different valence states, charges, and radii. Among the methods used for heavy metal ion removal, adsorption is widely employed due to its low cost and simple operation. As natural anionic clays, layered double hydroxides (LDHs) have drawn considerable attention for their use in the removal of anionic pollutants (such as heavy metal anions) due to their high removal efficiency and environmental friendliness. This article reviews the effects of the charge, type, and radius of the cations in the laminates of LDHs and the anions in the LDH interlayers, as well as the charge and radius of the heavy metals and the conditions (such as pH, coexisting ions, and temperature) on removing heavy metal ions with LDHs. The removal mechanisms have also been discussed. LDHs are hugely promising as an application for removing heavy metal ions that exist in different ionic forms by controlling the type and condition of LDHs.     

Optical sensors based on hybrid DNA/conjugated polymer complexes

Single-stranded DNA (ss-DNA) can specifically bind to various targets, including a complementary ss-DNA, ions, proteins, drugs, and so forth. When binding takes place, the oligonucleotide probe often undergoes a conformational transition. This conformational change of the negatively charged ss-DNA can be detected by using a water-soluble, cationic polythiophene derivative, which transduces the complex formation into an optical (colorimetric or fluorometric) signal without any labeling of the probe or the target. This simple and rapid methodology has enabled the specific and sensitive detection of nucleic acids and human thrombin. This new biophotonic tool can easily be applied to the detection of various other biomolecules and is also useful in the high-throughput screening of new drugs.     

油页岩飞灰对重金属离子的吸附动力学及热力学

采用批式振荡吸附法研究了燃油页岩电厂循环流化床锅炉飞灰对重金属离子Pb²+、Cu²+、Zn²+、Cd²+的吸附动力学及吸附热力学特性,并提出了吸附机理。结果表明,油页岩飞灰对Pb²+、Cu²+、Zn²+、Cd²+的吸附平衡数据符合Langmuir和Freundlich吸附等温方程,但Freundlich方程能够更好地描述吸附等温线。在油页岩飞灰对重金属离子吸附的初始阶段,拉格朗日准一级动力学方程、准二级动力学方程、Elovich方程、粒子内扩散模型均能很好地反映吸附模式,而整个吸附过程则遵循二级反应动力学方程,其吸附过程是液膜扩散和粒子内扩散共同作用的结果。油页岩飞灰对Pb²+、Cu²+、Zn²+、Cd²+的吸附是吸热反应。