Anodic stripping voltammetric determination of lead and cadmium in soil extracts

Two single-step extraction procedures validated by BCR, extraction with 0.43 mol dm⁻³ acetic acid and 0.05 mol dm⁻³ EDTA, are used for assessing bioavailable species of Pb and Cd in soils. After an extensive study of interferences of humic substances and using standard additions procedures, the extractable contents of Pb and Cd have been determined by DPASV directly in soil extracts with a good reproducibility (RSD varied from 1.0 to 7.9 %). Pb(II) and Cd(II) were released from complex in EDTA extracts by pH adjustment to 1 with 1 mol dm⁻³ HCl. The results were compared with those obtained with atomic absorption spectrometry and indicated reasonable agreement of both methods. Exchangeable forms represented 0.2 to 3.3 % and 13.0 to 63.6 % of total content of Pb and Cd in soils, respectively. EDTA extraction released from soils 7.9 to 29.9 % and 33.5 to 59.6 % of total content of Pb and Cd, respectively.     

Study of the chemical properties of gravitation dust sediments

The chemical properties of the gravitation dust sediment particles depend on their source. Two samples of the gravitation dust sediment have been investigated. The first sample, collected in locality Košice – Vel’ká Ida, near by U.S. Steel Ltd. (a metallurgy plant), represents the metallurgy industry pollutants. The second sample, collected in Košice city, represents the urban dust. Dust sediments particles create a non-homogeneous system. For this reason, the particles size distribution has been studied. On the base of the obtained experimental results one sample was divided into two approximately same mass fractions. The mineralogical composition of the dust particles matrix was determined by DTA, XRD, and SEM-EDS analyses. The total content of the chosen trace risk elements was defined by various AAS methods. The physical–chemical forms of elements in the dust sediment are characterised by different mobility and biotoxicity. The single-step extraction was used for the isolation of various element forms. 1 mol · dm⁻³ NH₄NO₃, 0.05 mol · dm⁻³ EDTA, and 2 mol · dm⁻³ HNO₃ were used as extraction reagents. The content of the elements in extracts was determined by the FAAS method.     

Two-Dimensional Photoluminescence Behavior of Langmuir-Blodgett Monolayers and Multilayers Composed of Decatungstoeuropate

Decatungstoeuropate/dimethyldioctadecylammonium (EuW₁₀/DODA) Langmuir-Blodgett (LB) monolayers and multilayers (7 layers) were fabricated by using aqueous solution of EuW₁₀ with different concentration (1.0–3.0 μmol dm⁻³). The results of specular X-ray reflectivity (SXR) and grazing incidence X-ray diffraction (GIXD) measurements for the EuW₁₀/DODA LB films indicated an increase in the interlayer distance and in-plane molecular ordering for the film fabricated with the concentrated EuW₁₀ solution, reflecting the dense packing of DODA and EuW₁₀ molecules. Their photoluminescence property also depended on the concentration of the EuW₁₀ solution. With an increase in the EuW₁₀ concentration in the subphase, both the relative intensity of the ⁵D₀→⁷F₁ transition and the emission lifetime increased. The lifetime of emission of the EuW₁₀ LB monolayers changed from 0.8±0.1 ms (1.0 μmol dm⁻³) to 1.0±0.1 ms (2.1 μmol dm⁻³) and 1.3±0.1 ms (3.0 μmol dm⁻³), which became closer to that (2.6 ms) of the solid, and EuW₁₀/DODA LB multilayers had the same tendency. The elongation of the emission lifetime was due to a decrease in the number of aqua molecules within the Eu³⁺-coordination sphere, which will be caused by the dense and regular packing of EuW₁₀ molecules.     

Stability constants of oxalate complexes of copper (II) and nickel (II) by paper electrophoresis

Summary Stability constants of copper (II) and nickel (II) oxalates have been determined by paper electrophoresis. Oxalic acid (0.005 mol dm⁻³) was added to the background electrolyte: 0.1 mol dm⁻³ HClO₄. The proportions of HC₂O ₄ ⁻ and C₂O ₄ ²⁻ were varied by changing the pH of the electrolyte, these anions yielding the complex ions MHC₂O ₄ ⁺ and M(C₂O₄) ₂ ²⁻ , average values of the stability constants for which are 10^2.4 and 10^7.6 respectively for Cu(II), and 10^2.3 and 10^6.5 for Ni(II) (μ=0.1,30°).     

Kinetics and the Mechanism of Iron(II) Reduction of cis-α-halogeno(cetylamine) (triethylenetetramine)cobalt(III) Complex Ion in Aqueous Acid Medium

The kinetics and mechanism of iron(II) reduction of cis- α-chloro/bromo(cetylamine)(triethylenetetramine) cobalt(III) surfactant complex ions were studied spectrophotometrically in an aqueous acid medium by following the disappearance of Co^III using an excess of the reductant under pseudo-first-order conditions: [Fe^II = 0.25 mol dm⁻³, [H⁺ = 0.1 mol dm⁻³, [μ = 1.0 mol dm⁻³ ionic strength in a nitrogen atmosphere at 303, 308 and 313 K. The reaction was found to be second order and showed acid independence in the range [H⁺ = 0.05−0.25 mol dm⁻³. The second order rate constant increased with Co^III concentration and the presence of aggregation of the complex itself altered the reaction rate. The effects of [Fe^II], [H⁺] and [ μ] on the rate were determined. Activation and thermodynamic parameters were computed. It is suggested that the reaction of Fe²⁺(aq) with Co^III complex proceeds by an inner-sphere mechanism.     

Electrochemical behavior of electrodeposited film derived from rhein and its activity towards myoglobin reduction

The stable electroactive thin film of rhein has been investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Electrochemical impedance spectroscopy of the electrodeposited film derived from rhein indicated the electrode reaction was kinetically controlled in the region of higher frequency, the charge transfer resistance was 2.6×10³ Ω cm² and capacitance value was 13.2 μF cm² . The electrodeposited film derived from rhein exhibited a good electrocatalytic activity for myoglobin (Mb) reduction. In 0.30 mol dm⁻³ H₂SO₄solution, the catalysis currents were proportional to the concentrations of Mb over the range of 1.5×10⁻⁷–1.3×10⁻⁵ mol dm⁻³. The detection limit is 1.0×10⁻⁷ mol dm⁻³ (S/N=3). The relative standard deviation is 4.8% for eight successive determinations of 5.0×10⁻⁷ mol dm⁻³ Mb.     

Glassy carbon and boron doped glassy carbon electrodes for voltammetric determination of linuron herbicide in the selected samples

In this study the application of home-made unmodified (GC) and bulk modified boron doped glassy carbon (GCB) electrodes for the voltammetric determination of the linuron was investigated. The electrodes were synthesized with a moderate temperature treatment (1000°C). Obtained results were compared with the electrochemical determination of the linuron using a commercial glassy carbon electrode (GC-Metrohm). The peak potential (E _p ) of linuron oxidation in 0.1 mol dm⁻³ H₂SO₄ as electrolyte was similar for all applied electrodes: 1.31, 1.34 and 1.28 V for GCB, GC and GC-Metrohm electrodes, respectively. Potential of linuron oxidation and current density depend on the pH of supporting electrolyte. Applying GCB and GC-Metrohm electrodes the most intensive electrochemical response for linuron was obtained in strongly acidic solution (0.1 mol dm⁻³ H₂SO₄). Applying the boron doped glassy carbon electrode the broadest linear range (0.005–0.1 μmol cm⁻³) for the linuron determination was obtained. The results of voltammetric determination of the linuron in spiked water samples showed good correlation between added and found amounts of linuron and also are in good agreement with the results obtained by HPLC-UV method. This appears to be the first application of a boron doped glassy carbon electrode for voltammetric determination of the environmental important compounds.      

Outer-Sphere electron-transfer and the effect of linkage isomerism in the titanium(III) reduction of nitro-pentacyanocobaltate(III) and nitro-, and nitrito-pentaamminecobalt(III) complexes in aqueous acidic media

The reductions of [Co(CN)₅NO₂]³⁻, [Co(NH₃)₅NO₂]²⁺ and [Co(NH₃)₅ONO]²⁺, by Ti^III in aqueous acidic solution have been studied spectrophotometrically. Kinetic studies were carried out using conventional techniques at an ionic strength of 1.0 mol dm⁻³ (LiCl/HCl) at 25.0 ± 0.1 °C and acid concentrations between 0.015 and 0.100 mol dm⁻³. The second-order rate constant is inverse—acid dependent and is described by the limiting rate law:- k₂ ≈ k₀ + k[H⁺]⁻¹,where k=k′K_a and K_a is the hydrolytic equilibrium constant for [Ti(H₂O)₆]³⁺. Values of k₀ obtained for [Co(CN)₅NO₂]³⁻, [Co(NH₃)₅NO₂]²⁺ and [Co(NH₃)₅ONO]²⁺ are (1.31 ± 0.05) × 10⁻² dm³ mol⁻¹ s⁻¹, (4.53 ± 0.08) × 10⁻² dm³ mol⁻¹ s⁻¹ and (1.7 ± 0.08) × 10⁻² dm³ mol⁻¹ s⁻¹ respectively, while the corresponding k′ values from reductions by TiOH²⁺ are 10.27 ± 0.45 dm³ mol⁻¹ s⁻¹, 14.99 ± 0.70 dm³ mol⁻¹ s⁻¹ and 17.93 ± 0.78 dm³ mol⁻¹ s⁻¹ respectively. Values of K _a obtained for the three complexes lie in the range (1–2) × 10⁻³ mol dm⁻³ which suggest an outer-sphere mechanism.     

Flow injection spectrofluorimetric determination of iron(III) in water using salicylic acid

A simple and fast flow injection fluorescence quenching method for the determination of iron in water has been developed. Fluorimetric determination is based on the measurement of the quenching effect of iron on salicylic acid fluorescence. An emission peak of salicylic acid in aqueous solution occurs at 409 nm with excitation at 299 nm. The carrier solution used was 2 × 10⁻⁶ mol L⁻¹ salicylic acid in 0.1 mol L⁻¹ NH₄⁺/NH₃ buffer solution at pH 8.5. Linear calibration was obtained for 5–100 μg L⁻¹ iron(III) and the relative standard deviation was 1.25 % (n = 5) for a 20 μL injection volume iron(III). The limit of detection was 0.3 μg L⁻¹ and the sampling rate was 60 h⁻¹. The effect of interferences from various metals and anions commonly present in water was also studied. The method was successfully applied to the determination of low levels of iron in real samples (river, sea, and spring waters).     

Cathodic Adsorptive Stripping Voltammetry for Estimation of the Forest Area Pollution with Nickel and Cobalt

 Necessary conditions were established for simultaneous nickel and cobalt determination in environmental samples, such as oak wood and soil, based on cathodic adsorptive stripping voltammetry. Ni(II) and Co(II), complexed with dimethylglyoxime, were determined using a hanging mercury drop electrode. Optimum conditions were found to be: accumulation time 90 s, accumulation potential −0.80 V vs. SCE, supporting electrolyte 0.2 mol dm⁻³ ammonia-ammonium chloride buffer (pH = 9.4) + 0.05 mol dm⁻³ NaNO₂ and dimethylglyoxime 2 × 10⁻⁴ mol dm⁻³. A linear current-concentration relationship was observed up to 7.51×10 ⁻⁷ mol dm⁻³ for Ni(II) and 7.0 × 10⁻⁷ mol dm⁻³ for Co(II). Excess amounts of zinc(II) interfering with cobalt peaks were masked by complexation with EDTA. Wood and soils were mineralized by applying a microwave digestion system, using the mixtures H₂O₂ + HNO₃ or HNO₃ + HF, respectively. The developed procedure was tested by analysing international reference materials (BCR 62 Olive Leaves and GBW 08302 Tibet Soil). The developed procedure was used to determine pollution of oak stand with nickel and cobalt in different regions of Poland. Received August 10, 2000. Revision May 22, 2001.     

Effect of pH and ionic strength on the interaction of humic acid with aluminium oxide

The effect of pH and neutral electrolyte on the interaction between humic acid/humate and γ-AlOOH (boehmite) was investigated. The quantitative characterization of surface charging for both partners was performed by means of potentiometric acid–base titration. The intrinsic equilibrium constants for surface charge formation were logK _a,1 ^int=6.7±0.2 and logK _a,2 ^int = 10.6±0.2 and the point of zero charge was 8.7±0.1 for aluminium oxide. The pH-dependent solubility and the speciation of dissolved aluminium was calculated (MINTEQA2). The fitted (FITEQL) pK values for dissociation of acidic groups of humic acid were pK ₁ = 3.7±0.1 and pK ₂ = 6.6±0.1 and the total acidity was 4.56 mmol g⁻¹. The pH range for the adsorption study was limited to between pH 5 and 10, where the amount of the aluminium species in the aqueous phase is negligible (less than 10⁻⁵ mol dm⁻³) and the complicating side equilibria can be neglected. Adsorption isotherms were determined at pH ∼ 5.5, ∼8.5 and ∼9.5, where the surface of adsorbent is positive, neutral and negative, respectively, and at 0.001, 0.1, 0.25 and 0.50 mol dm⁻³ NaNO₃. The isotherms are of the Langmuir type, except that measured at pH ∼ 5.5 in the presence of 0.25 and 0.5 mol dm⁻³ salt. The interaction between humic acid/humate and aluminium oxide is mainly a ligand-exchange reaction with humic macroions with changing conformation under the influence of the charged interface. With increasing ionic strength the surface complexation takes place with more and more compressed humic macroions. The contribution of Coulombic interaction of oppositely charged partners is significant at acidic pH. We suppose heterocoagulation of humic acid and aluminium oxide particles at pH ∼ 5.5 and higher salt content to explain the unusual increase in the apparent amount of humic acid adsorbed. Received: 20 July 1999 /Accepted in revised form: 20 October 1999     

Ionic strength dependence of formation constants, complexation of nitrilotriacetic acid with tungsten(VI) ion

The dependence on ionic strength of protonation of nitrilotriacetic acid and its complexation with W(VI) is reported in sodium perchlorate, sodium nitrate and sodium chloride solutions as background salts. The measurements have been performed at 25°C and various ionic strengths in the range 0.1–1.0 mol dm⁻³, using a combination of potentiometric and spectrophotometric techniques. The overall analysis of the present and the previous data dealing with the determination of stability constants at different ionic strengths allowed us to obtain a general equation, by which a formation constant determined at a fixed ionic strength can be calculated, with a good approximation, at another ionic strength, if 0.1 ≤ ionic strength ≤ 1.0 mol dm⁻³ sodium perchlorate, sodium nitrate or sodium chloride.     

Differential pulse polarographic study of thiamine (vitamin B1) in neutral and acidic aqueous solutions

The differential pulse (dp) polarograms of thiamine in neutral aqueous solutions exhibited six peaks at low depolarizer concentration (⋦10⁻⁴ mol dm⁻³) and only three peaks at concentrations ≥10⁻³ mol dm⁻³. Only one of these was found to correspond to the diffusion-controlled reduction of this compound at the dme and this was shown to be an irreversible two-electron process. The kinetic parameters derived from the dp polarograms were found to be in good agreement with those calculated from classical polarograms and were:E _1/2=−1·261 Vvs SCE,an _a=0·54 andD≈3·5×10⁻⁶ cm² sec⁻¹ for 10⁻³ mol dm⁻³ thiamine in 0·1 mol dm⁻³ acetate buffer (pH 6·5). The reduction product has been identified as dihydrothiamine. The effect of pH on the dpp of thiamine was studied in the pH range 0–7. In the pH region 5·5 to 7·0 only one peak attributable to the B₁ ⁺ form of thiamine is present. In the pH region 3·5–5·5 another dpp peak attributable to the protonated form (B₁H²⁺) of thiamine was also observed. At pHs less than 3 only one peak was observed which could be attributed to the doubly protonated form (B₁ H₂ ³⁺) of thiamine. Surfactants like triton-X-100 and CTABr were found to inhibit the electroreduction of thiamine due to the strong adsorption of these compounds on the dme. Thiamine itself was found to have an inhibitory effect on its own electroreduction, although to a smaller extent.     

Mechanism of the acid catalysed hydrolysis of the chromatopenta-amminecobalt(III) ion

The kinetics of the acid hydrolysis of chromatopenta-amminecobalt(III) ion has been studied using a stopped-flow method over the acidity range 0.01≤[H⁺]<-1.0 mol dm⁻³ and 20.0°C<-ϕ<-30.0°C at ionic strengths 0.5 and 1.0 mol dm⁻³ (LiNO₃). These studies reveal that the complex is first protonated and subsequently hydrolysed to the aquapentaammine cobalt(III) ion. The rate constants for the hydrolysis of the mono and diprotonated species at 25°C are 0.83±0.01 s⁻¹ and (1.60±0.02)×10⁴ mol⁻¹ dm⁻³ s⁻¹, respectively. TMC 2664     

Ion-pair formation in the outer-sphere electron transfer reactions between tris-(1, 10) phenanthroline iron(II) and the halopentacyanocobaltate(III) complexes in aqueous acidic solutions

The kinetics of the reactions between Fe(phen) ₃ ²⁺ [phen = tris–(1,10) phenanthroline] and Co(CN)₅X³⁻ (X = Cl, Br or I) have been investigated in aqueous acidic solutions at I = 0.1 mol dm⁻³ (NaCl/HCl). The reactions were carried out at a fixed acid concentration ([H⁺] = 0.01 mol dm⁻³) and the second-order rate constants for the reactions at 25 °C were within the range of (0.151–1.117) dm³ mol⁻¹ s⁻¹. Ion-pair constants K _ip for these reactions, taking into consideration the protonation of the cobalt complexes, were 5.19 × 10⁴, 3.00 × 10² and 4.02 × 10⁴ mol⁻¹ dm⁻³ for X = Cl, Br and I, respectively. Activation parameters measured for these systems were as follows: ΔH* (kJ K⁻¹ mol⁻¹) = 94.3 ± 0.6, 97.3 ± 1.0 and 109.1 ± 0.4; ΔS* (J K⁻¹) = 69.1 ± 1.9, 74.9 ± 3.2 and 112.3 ± 1.3; ΔG* (kJ) = 73.7 ± 0.6, 75.0 ± 1.0 and 75.7 ± 0.4; E _a (kJ) = 96.9 ± 0.3, 99.8 ± 0.4, and 122.9 ± 0.3; A (dm³ mol⁻¹ s⁻¹) = (7.079 ± 0.035) × 10¹⁶, (1.413 ± 0.011) × 10¹⁷, and (9.772 ± 0.027) × 10²⁰ for X = Cl, Br, and I respectively. An outer – sphere mechanism is proposed for all the reactions.     

Hydrothermal alteration of BaxMIVxCe2?2 x (PO4)2 [MIV=Zr, Hf] as hosts for minor actinides

Ba_xM^IV _xCe_2−2x (PO₄)₂ [M^IV=Zr, Hf] monazite-like compounds were succesfully synthesized by solid state reaction for x≤0.2 (M^IV=Zr) and x≤0.1 (M^IV=Hf). The low miscibility of BaM^IV(PO₄)₂ (M^IV=Zr, Hf) compounds in CePO₄ was explained on the basis of the monoclinic-to-trigonal phase transition that occurs at 733 K in BaZr(PO₄)₂ and at 798 K in BaHf(PO₄)₂. The hydrothermal alteration of these compounds was tested using a modified MCC-1 static leaching test in acid (1 mol·dm⁻³ HCl) and basic (1 mol dm⁻³ KOH) solutions at 373 K, 473 K and 573 K; both the experimental fluids and the reacted solid specimens were analyzed by different analytical techniques and the reaction mechanisms were elucidated. All the tested compounds are stable in 1 mol·dm⁻³ HCl until 573 K. The stability of the monazites in 1 mol·dm⁻³ KOH is a function of the temperature.     

Kinetic spectrophotometric determination of hydrazine

A kinetic spectrophotometric method for hydrazine determination in the range of 9.36×10⁻⁷ to 4.37×10⁻⁵ mol dm⁻³, based on the inhibitory effect of hydrazine on the oxidation of Victoria Blue 4- R by KBrO₃, was developed and validated. Kinetic parameters are reported for both the indicating and the inhibiting reaction. The detection limit was established as 9.98×10⁻⁸ mol dm⁻³. The selectivity of the proposed method was tested considering the influence of different ions that may be present in real samples. The method was successfully applied for hydrazine determination in various samples (very pure water from the water-steam system of a power plant and Isoniazid tablets, a pharmaceutical product).      

Monitoring formation of poly(neutral red) film by EQCM

An electrochemical quartz crystal microbalance (EQCM) is employed for monitoring the growth of poly(neutral red) films on platinum in the electrolytic solution containing 5.0 mmol dm⁻³ neutral red, 0.3 mol dm⁻³ H₂SO₄, and 0.5 mol dm⁻³ Na₂SO₄. The in situ measurement of the frequency changes of the EQCM reveals that both the adsorption/desorption of neutral red and the formation of poly(neutral red) film can be observed together with anion sorption/desorption during the redox transformation of the polymer, and that the polymerization rate of neutral red increases slowly before the 11th cycle and then increases quickly with increasing number of potential cycles. Published in Russian in Elektrokhimiya, 2007, Vol. 43, No. 3, pp. 284–289. The text was submitted by the authors in English.     

Protonation of Chloro-, Bromo- and Iodo-pentacyanocobaltate(III) Complexes

The reactions between Fe(Phen)₃²⁺[phen = tris-(1,10) phenanthroline] and Co(CN)₅X³⁻ (X = Cl, Br or I) have been studied in aqueous acidic solutions at 25 °C and ionic strength in the range I = 0.001–0.02 mol dm⁻³ (NaCl/HCl). Plots of k₂ versus √I, applying Debye–Huckel Theory, gave the values −1.79 ± 0.18, −1.65 ± 0.18 and 1.81 ± 0.10 as the product of charges (Z_AZ_B) for the reactions of Fe(Phen)₃²⁺ with the chloro-, bromo- and iodo- complexes respectively. Z_AZ_B of ≈ −2 suggests that the charge on these Co^III complexes cannot be −3 but is −1. This suggests the possibility of protonation of these Co^III complexes. Protonation was investigated over the range [H⁺] = 0.0001 −0.06 mol dm⁻³ and the protonation constants K_a obtained are 1.22 × 10³, 7.31 × 10³ and 9.90 × 10² dm⁶ mol⁻³ for X = Cl, Br and I, respectively.     

Intermediate and ion-pair formation in the outer-sphere reactions between azido-pentacyanocobaltate(III) and iron(II) polypyridyl complexes in aqueous medium

The kinetics of the reactions between azido-pentacyanocobaltate(III), Co(CN)₅N₃ ³⁻, and iron(II) polypyridyl complexes, Fe(LL)₃ ²⁺ (LL = bipy, phen), have been studied in both neutral and acidic aqueous solutions at I = 0.1 mol dm⁻³ NaCl. The reactions were carried out under pseudo-first-order conditions in which the concentration of Fe(LL)₃ ²⁺ was kept constant, and the second-order rate constants obtained for the reactions at 35 °C were within the range of 0.156–0.219 dm³ mol⁻¹ s⁻¹ for LL = bipy and 0.090–0.118 dm³ mol⁻¹ s⁻¹ for LL = phen. Activation parameters were measured for these systems. The dependence of reaction rates on acid was studied in the range [H⁺] = 0.001–0.008 mol dm⁻³. The reaction in acid medium shows interesting kinetics. Two reactive species were identified in acid medium, namely, the protonated cobalt complex and the azido-bridged binuclear complex. The electron-transfer process is proposed to go by mixed outer- and inner-sphere mechanisms in acid medium, in which electron transfer through the bridged inner-sphere complex (k ₅) is slower than through the outer-sphere path (k ₄). Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.