Synthesis of poly(phenylgermanosilanes) and poly(phenylgermanocarbosilanes)

Phenyl-substituted poly(germanosilanes) and poly(germanocarbosilanes) have been synthesized through the Wurtz-Kipping reaction via dechlorination of mixtures of dichlorophenylsilanes (PhSi(R)Cl₂, where R = H, Ph, or vinyl) with diphenyldichlorogermane in the presence of an ultradisperse sodium suspension. The polymers thus synthesized have been investigated by X-ray fluorescence analysis; FTIR and UV spectroscopy; and ¹H, ¹³C, and ²⁹Si NMR spectroscopy. The peak maxima in the UV spectra of the polymers dissolved in THF are in the wavelength range of 300–375 nm. Under the effect of UV irradiation with a wavelength of 320–380 nm, photoluminescence emission peaking in the range of 380–470 nm is observed. Size exclusion chromatography indicates that all the (co)polymers under examination are characterized by a narrow GPC curve and their polydispersity indexes are no larger than 1.5. According to dynamic TGA data, the weight loss of the polymers reaches 80% even at 500°C. Owing to formation of branched structures in vinyl-substituted copolymers, the GPC curves widen (the polydispersity index is ～6), while the yield of an inorganic residue at 900°C amounts to 40%.     

The disproportionation of Cu(I)X mediated by ligand and solvent into Cu(0) and Cu(II)X2 and its implications for SET‐LRP

Disproportionation of Cu(I)X is the major step in Single‐Electron Transfer Living Radical Polymerization (SET‐LRP). The disproportionation of Cu(I)X mediated by Me₆‐TREN in various solvents was studied through UV–vis spectroscopy and Dynamic Light Scattering (DLS). UV–vis experiments reveal that disproportionation is dependent on both solvent composition and concentration of Me₆‐TREN, consistent with a revised equilibrium expression and corroborated by mathematical models. Electrochemistry data do not accurately predict the extent of disproportionation in the presence of Me₆‐TREN. Exemplified by DMSO, a favored solvent for SET‐LRP, UV–vis spectroscopy shows that under certain conditions disproportionation is four‐orders of magnitude greater than the value reported from electrochemistry experiments. Through UV–vis and DLS analysis, it was demonstrated that DMSO, DMF, DMAC, and NMP, stabilize colloidal Cu(0), while acetone, EtOH, EC, MeOH, PC, and H₂O facilitate agglomeration of Cu(0) particles. Additionally, for colloidal Cu(0) stabilizing solvents, the amount of ligand and solvent composition decide the particle size distribution. Therefore, the kinetics of SET‐LRP are cooperatively and synergistically determined by the complex interplay of solvent polarity, the extent of disproportionation in the solvent/ligand mixture, and the ability of that mixture to stabilize colloidal Cu(0) or control particle size distribution. The implications of these results for SET‐LRP are discussed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5606–5628, 2009     

Synthesis and photocatalytic activity of nanocrystalline TiO2 co-doped with nitrogen and cobalt(II)

Nitrogen-modified cobalt-doped TiO₂ materials were successfully prepared via a modified sol–gel method. The structure and properties of the catalysts were characterized via X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution TEM, ultraviolet–visible light diffuse reflectance spectra (UV–Vis DRS), N₂ adsorption–desorption isotherms, and energy-dispersive X-ray spectroscopy. The XRD patterns of the pure and co-doped TiO₂ samples indicate that the predominant phase was anatase. The average grain size obtained from TEM was approximately 10 nm. The Brunauer–Emmett–Teller analysis results indicate that the specific surface area was 77.7 m² g^?1. The UV–Vis DRS results for the co-doped sample reveal an absorption edge that had been red-shifted to 500 nm. The photocatalytic activities of the samples were evaluated through photodegradation of papermaking wastewater under UV and visible light irradiation. Compared with the cobalt-doped TiO₂ sample and Degussa P25, the 3 mol% N-doped mesoporous N/Co-TiO₂ photocatalyst exhibited the highest photocatalytic activity, which can be ascribed to the synergistic effect of the N and Co co-doping.     

DNA interaction and cytotoxicity studies of ruthenium(III) complexes containing 3-(benzothiazol-2-yliminomethyl)-naphthalen-2-ol ligand

A new Schiff base, 3-(benzothiazol-2-yliminomethyl)-naphthalen-2-ol, has been synthesized and characterized by elemental analysis, Fourier transform infrared spectroscopy (FT-IR), UV–vis, nuclear magnetic resonance, and single-crystal X-ray diffraction. Ruthenium(III) complexes of the Schiff base were synthesized and characterized by analytical and spectroscopic (FT-IR, UV–vis, and electron paramagnetic resonance) data as well as magnetic susceptibility measurements. DNA-binding properties of the ligand and its ruthenium(III) complexes have been investigated by electronic absorption spectroscopy. The three ruthenium(III) complexes were tested for DNA cleavage. Further in vitro study of the cytotoxity of the ligand and the complexes on human cervical cancer cell line and human laryngeal epithelial carcinoma cell line were carried out.     

New Au(III), Pt(II) and Pd(II) complexes with glycyl-containing homopeptides

Twelve new Au(III), Pt(II) and Pd(II) complexes with glycyl-containing homopeptides glycyl-glycine (G2), glycyl-glycyl-glycine (G3), glycyl-glycyl-gycyl-glycine (G4), glycyl-glycyl-glycyl-glycyl-glycine (G5) and glycyl-glycyl-glycyl-glycyl-glycyl-glycine (G6) have been synthesized, isolated and characterized spectroscopically and structurally by means of solid-state linear-dichroic infrared (IR-LD) spectroscopy of oriented colloids in nematic liquid crystal host, ¹H- and ¹³C-NMR, TGA and DSC, UV–Vis spectroscopy, EPR, ESI- and FAB mass spectrometry and HPLC tandem mass spectrometry (HPLC-MS/MS). Quantum chemical calculations are carried out with a view to obtain the structures and spectroscopic properties of the ligand and newly synthesized metal complexes.     

Comparative studies of solid‐state synthesized poly(o‐methoxyaniline) and poly (o‐toluidine)

Poly(o‐methoxyaniline) (POMA) and poly(o‐toluidine) (POT) salts doped with different acids (methanesulphonic acid (MeSA), trifluoroacetic acid (TFA), and hydrochloric acid (HCl)) were synthesized by using solid‐state polymerization method. The polymers were characterized by Fourier transform infrared (FTIR) spectra, ultraviolet–visible (UV–Vis) spectrometry, X‐ray diffraction (XRD), cyclic voltammetry (CV), and conductivity measurements. Transmission electron microscopy (TEM) was done to study the morphologies of POMA and POT salts. The FTIR and UV‐Vis absorption spectra revealed that the reduced phase was predominant in POMA salts, and the pernigraniline phase was predominant in POT salts. It was found that POMA salts displayed higher doping level and conductivity. In contrast, POT salts were lower at doping levels and conductivity. In accordance with these results, the electrochemical activity was also found to be lower in POT salts. The XRD patterns showed that the POMA salts displayed higher crystallinity than POT salts. The results from TEM revealed that the morphologies of POMA salts were different from those of POT salts. Copyright © 2008 John Wiley & Sons, Ltd.     

Complexation between poly(methacrylic) and poly(acrylic) acids and star-shaped poly(ethylene glycol) based on pyrogallol

Complex formation between polymethacrylic (PMAA) and polyacrylic acids, and star-shaped poly(ethylene glycol) prepared by ethoxylation of pyrogallol (Pyr–PEG) has been studied viscometrically and by potentiometric titration in water solution. The competitive ability of Pyr–PEG and of the derivatives of the ethoxylation of phenol and hydroquinone in complex formation with PMAA has been compared by UV spectroscopy. Pyr–PEG turns out to be the weakest competitor because of its chemical structure. © 1996 John Wiley & Sons, Inc.     

Photochemical behavior of poly(ethylacryloylacetate) and poly(acryloylacetone) films

Films of poly(ethylacryloylacetate) (PEAA) and poly(acryloylacetone) (PAA) were subjected to UV irradiation (λ = 254 nm) at room temperature. The photoinduced structure transfer from cis-enol onto a diketo forms has been investigated. The structure transfer caused by UV light was found to be slower than for the corresponding process in solution. The spectral investigations (UV, IR) showed reversible process of photoketonization. The results were analyzed in terms of the model for the participation of the trans-enol form in the process of the ketonization. Based on the results obtained, some general conclusions were made about the organization of the units in the polymer chain. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3683–3688, 1997     

Synthesis and characterization of novel ferrocenyl glycidyl ether polymer,ferrocenyl poly (epichlorohydrin) and ferrocenyl poly (glycidyl azide)

Poly (ferrocenyl glycidyl ether) was synthesized by polymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane (FcEpo) using toluene solution of methylaluminoxane as the catalyst. Copolymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane with epichlorohydrin was used for the synthesis of another ferrocenyl based poly (epichlorohydrin). Ferrocenyl based poly (glycidyl azide), GAP, was synthesized by treatment of sodium azide with this copolymer in DMF as solvent at room temperature. The synthesized ferrocenyl based polymers were characterized by FT-IR, ¹HNMR, UV–Vis, TGA, DSC and GPC analysis. The UV–Vis spectra of synthesized polymers show the absorption band of ferrocene moiety at about 450 nm. The TGA and DSC analysis show that poly (ferrocenyl glycidyl ether) has good thermal stability. The TGA analysis shows that the copolymerization of 2-[(4-ferrocenylbutoxy)methyl]oxirane with epichlorohydrin improved the thermal stability of the copolymer. The GPC analysis of poly (ferrocenyl glycidyl ether), ferrocenyl based poly (epichlorohydrin) and Ferrocenyl based poly (glycidyl azide) show the PDI between 1.14–1.17. The electrochemical behavior of synthesized polymers was investigated by cyclic voltammetry (CV) measurements. The CV curves of synthesized polymers show good electrochemical performance and there is one redox system with the single-electron reversible reaction that associated with ferrocene moiety in polymers structure. The anodic and cathodic peak currents increased with scan rate confirmed redox reactions in the system are kinetically fast diffusion-controlled reactions.     

1,2-Diketones as photoinitiators of both cationic and free-radical photopolymerization under UV (392 nm) or Blue (455 nm) LEDs

The photoinitiation abilities of three 1,2-diketones [i.e., acenaphthenequinone ( ANPQ ), aceanthrenequinone ( AATQ ), and 9,10-phenanthrenequinone ( PANQ )]-based photoinitiating systems [PISs, with additives such as iodonium salt, N-vinylcarbazole (NVK), tertiary amine, and phenacyl bromide (R-Br)] for cationic photopolymerization and free-radical photopolymerization under the irradiation of ultraviolet (UV; 392 nm) or blue (455 nm) light-emitting diode (LED) bulb are investigated. All 1,2-diketones studied exhibit ground state absorption that match with the emission spectra of UV (392 nm) or blue LED (455 nm) better than that of the well-known blue-light-sensitive photoinitiator camphorquinone (CQ). In particular, AATQ /iodonium salt/NVK can show high photoinitiating ability (with epoxide conversion yield >70%) under the UV light irradiation due to the effect of NVK. In addition, 1,2-diketone/iodonium salt (and optional NVK) systems are capable of initiating free-radical photopolymerization of methacrylates, with conversions of 50–58%. Furthermore, some 1,2-diketone/tertiary amine (and optional R-Br) combinations are found to demonstrate high efficiency to initiate free-radical photopolymerization, and 71% of methacrylate conversion can be achieved with PANQ /tertiary amine/R-Br PIS. Some 1,2-ketone-based PISs can even exhibit higher efficiency than the CQ-based systems. The photochemical mechanism of the radical generation from the 1,2-diketone-based PISs is investigated and found to be consistent with the related photopolymerization efficiency. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 792–802     

Spectroscopic,morphology and electrical conductivity studies on Co(II), Ni(II), Cu(II) and Mn(II)-oxaloyldihydrazone complexes

Cobalt (II), nickel (II), copper (II) and manganese (II) complexes of dihydrazone derived from the condensation of oxaloyldihydrazide with 2-hydroxybenzaldehyde have been synthesized. The dihydrazone ligand/chelates were characterized on the basis of their elemental analyses, spectral (UV–Vis., FT-IR, mass, ¹H NMR), magnetism, thermal (TGA) measurements and structures of the compounds have been established. The surface morphology of the desired complexes was studied by SEM. The ligand is coordinated to the Ni(II), Co(II), Mn(II) and Cu(II) centers in bi, tetra, penta and hexadentate way giving mono-nuclear complexes except in case of manganese and copper the bi-nuclear complexes were formed. The nickel complex has tetrahedral geometry while the other complexes are suggested to have octahedral configurations. The prepared samples have been assayed for their electrical activities. The electrical activity (DC and AC conductivity) for ligand and its metal complexes has been examined at different frequencies (1, 10, 100 kHz) in the temperature ranges 303–573 and 300–625 K, respectively. The DC and AC conductivity are viewed as thermally activated process at higher temperatures and a marked increment was seen in case of Mn(II) complex. The dielectric permittivity was determined in the temperature area of 300–625 K and diminished with augmentation of frequency proposing a typical behavior of dielectrics.     

Encapsulation of tetraazamacrocyclic complexes of cobalt(II), copper(II) and oxovanadium(IV) in zeolite-Y and their use as catalysts for the oxidation of styrene

Encapsulation of tetraazamacrocyclic complexes of Co(II), Cu(II) and V(IV) into zeolite-Y has been accomplished, and the resulting materials were used as heterogeneous catalysts for aerobic oxidation of styrene. The materials were prepared by a ship-in-a-bottle method, in which the transition metal cations were first ion-exchanged into zeolite-Y and then reacted with ethylenediamine, followed by acetylacetone. The pure tetraazamacrocyclic complexes were characterized by FTIR, solid UV–Vis and elemental analysis. The structural integrity throughout the immobilization procedure, the successful immobilization of the macrocyclic complexes, and the loadings of metal ions and macrocyclic ligands were determined by characterization techniques such as FTIR, diffuse reflection UV–Vis, inductively coupled plasma atomic emission spectroscopy, scanning electron microscopy, TG/DTA and powder X-ray diffraction. Compared with their homogeneous analogues, the catalytic properties of the encapsulated macrocyclic complexes in the oxidation of styrene with air were investigated. The immobilized complexes proved to be active catalysts and could be reused without significant loss in activity.     

Synthesis,characterization, spectroscopic and catalytic oxidation studies of Fe(III), Ni(II), Co(III), V(IV) and U(VI) Schiff base complexes with N,O donor ligands derived from 2,3-diaminopyridine

Fifteen new complexes of transition metals were designed using three Schiff base ligands and aldol condensation of 2,3-diaminopyridine with 5-R-2-hydroxybenzaldehyde (R = F, Cl, Br) in the 1:2 molar ratio. The tetradentate ligands N,N′-bis(5-R-2-hydroxybenzaldehyde) pyridine were acquired with the common formula H₂[(5-R-sal)₂py] and characterized by IR, UV–Vis spectra, ¹H-NMR and elemental analysis. These ligands produce 1:1 complexes M[(5-R-sal)₂py] with Fe(III), Ni(II), Co(III), V(IV) and U(VI) metal ions. The electronic property and nature of complexes were identified by IR, UV–Vis spectra, elemental analysis, X-ray crystallography and cyclic voltammetric methods. The catalytic activity of complexes for epoxidation of styrene with UHP as primary oxidant at minimal temperature (10 °C) has been planned. The spectral data of the ligands and their complexes are deliberate in connection with the structural changes which happen due to complex preparation. The electrochemical outcome has good conformability with what suggested for electronic interaction among metal center and ligand by the UV–Vis and IR measurements.     

Structural and physicochemical characterization of zinc(II) and cadmium(II) complexes with 1,4‐dimethy‐lhomopiperazine

In order to know the relationship between structures and physicochemical properties of Group 12 metal(II) ions, the complexes with ‘simple’ ligands, such as alkyl cyclic diamine ligand and halide ions, were synthesized by the reaction of 1,4‐dimethylhomopiperazine (hp′) with MX₂ as metal sources (M = Zn, Cd; X = Cl, Br, I). The five structural types, [ZnX₂(hp′)] (X = Cl ( 1 ), Br ( 2 ) and I ( 3 )), [ZnX₃(Hhp′)] (X = Cl ( 1′ ) and Br ( 2′ )), [CdCl₂(hp′)]_n ( 4 ), [{CdCl₂(Hhp′)}₂(µ‐Cl)₂] ( 4′ ) and [{CdX(hp′)}₂(µ‐X)₂] (X = Br ( 5 ), I ( 6 )), were determined by X‐ray analysis. The sizes of both metal(II) and halide ions and the difference in each other's polarizability influence each structure. All complexes were characterized by IR, far‐IR, Raman and UV–Vis absorption spectroscopies. In the far‐IR and Raman spectra, the typical ν(M N) and ν(M X) peaks clearly depend on the five structural types around 540–410 cm⁻¹ and 350–160 cm⁻¹ respectively. The UV–Vis absorption band energy around 204–250 nm also reflects each structural type. Copyright © 2005 John Wiley & Sons, Ltd.     

Photochemical stability of collagen/poly(ethylene oxide) blends

The photochemical stability of the blends of collagen and poly(ethylene oxide) PEO has been studied by Fourier transform infrared spectroscopy (FTIR), UV–vis spectroscopy and viscosimetry. Surface properties before and after UV irradiation were observed using an optical microscope.Collagen and PEO were immiscible in diluted solution and only small interactions between the two components in the solid state were observed. New materials based on the blending of collagen and PEO that we obtained have a different photochemical stability than those of single components. In general, collagen/PEO blends are less stable under UV irradiation than pure collagen. The influence of PEO on the photochemical stability of collagen depends on the concentration of this polymer in the blend. Microscopic photographs show that the surface characteristics of thin films of collagen/PEO blends are not drastically altered after UV irradiation.     

Synthesis, spectral characterization, and thermal behavior of mononuclear Cu(II), Co(II), Ni(II), Mn(II), and Zn(II) complexes with 5-bromosalycilaldehyde isonicotinoylhydrazone

A bidentate/tridentate 5-bromosalycilaldehyde isonicotinoylhydrazone Schiff base was synthesized by condensing 5-bromosalycilaldehyde with isonicotinoylhydrazine. Cu(II), Co(II), Ni(II), Mn(II) and Zn(II) complexes of this chelating ligand were synthesized using nitrates of these metals. The ligand and the complexes were characterized by elemental analysis, UV–Vis, IR and EPR spectroscopy, conductance and magnetic susceptibility measurements, fluorescence, cyclic voltammetry and thermogravimetric analysis. The ligand and Zn(II) complex exhibits solid-state photoluminescence at room temperature.     

Langmuir monolayers and Langmuir–Blodgett films of ferritin prepared by using a surfactant mixture of eicosylamine (EA) and methyl stearate (SME)

Magnetic Langmuir–Blodgett films of ferritin have been prepared by using the adsorption properties of a 1/4 mixed monolayer of eicosylamine (EA) and methyl stearate (SME). BAM images show that a more homogeneous distribution of ferritin at the air–water interface is achieved by using this mixture of surfactants instead of the DODA/SME mixed matrix of a previous work. Transfer of the monolayer onto different substrates allowed the preparation of multilayer LB films. Infrared and UV–Vis spectroscopies indicate that ferritin molecules are incorporated within the LB films. Furthermore, UV–Vis spectroscopy measurements reveal that the amount of ferritin incorporated into these LB film has been increased with respect to that in the DODA/SME LB films. Finally magnetic measurements confirm that the superparamagnetic properties of this molecule are preserved in the LB films.     

Surface vibrational study of macrocycle complexes: Co(II), Ni(II), Cu(II) and Zn(II) bis(phenylhydrazine)-1,10-phenanthroline

A complete assignment of the infrared spectra of the title macrocycles was carried out on the basis of well-documented references and a normal coordinate analysis based on a simplified molecular model. The structure of the complexes has been inferred from IR and UV–VIS data. Infrared reflection–absorption (IRRAS) spectra using a smooth copper surface and surface enhanced Raman spectra of samples dissolved in colloidal silver were registered. The non-planar structure of the coordination site and the sterical hindrance imposed by phenyl substituent fragments avoid any adsorbate–substrate interaction.     

Microemulsion synthesis, characterization of highly visible light responsive rare Earth-doped bi(2) o(3)

In this paper, Bi₂O₃ and rare earth (La, Ce)‐doped Bi₂O₃ visible‐light‐driven photocatalysts were prepared in a Triton X‐100/n‐hexanol/cyclohexane/water reverse microemulsion. The resulting materials were characterized by X‐ray powder diffraction (XRD), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) surface area, photoluminescence spectra (PLS) and UV–Vis diffuse reflectance spectroscopy. The XRD patterns of the as‐prepared catalysts calcined at 500°C exhibited only the characteristic peaks of monoclinic α‐Bi₂O₃. PLS analysis implied that the separation efficiency for electron‐hole has been enhanced when Bi₂O₃ was doped with rare earth. UV–Vis diffuse reflectance spectroscopy measurements presented an extension of light absorption into the visible region. The photocatalytic activity of the samples was evaluated by degradation of methyl orange (MO) and 2,4‐dichlorophenol (2,4‐DCP). The results displayed that the photocatalytic activity of rare earth‐doped Bi₂O₃ was higher than that of dopant‐free Bi₂O₃. The optimal dopant amount of La or Ce was 1.0 mol%. And the mechanisms of influence on the photocatalytic activity of the catalysts were discussed.     

Synthesis,structure, spectroscopic,and DNA binding properties of Co(III) and Ni(II) complexes with ((E)-2-(amino((pyridin-2-ylmethylene)amino)methylene)maleonitrile)

Two new complexes, [Co(L)₂]Cl·(MeOH)₂ (1) and [Ni(L)₂]₄·EtOH (2) (L?=?(E)-2-(amino((pyridin-2-ylmethylene)amino)methylene)maleonitrile), were synthesized and characterized by X-ray crystallography, IR, UV, and fluorescence spectroscopy. According to X-ray crystallographic studies, each metal was six-coordinate with six nitrogens from two ligands. Both complexes form two-dimensional supramolecular networks via hydrogen bonding and π–π interactions. Ultraviolet and visible spectra showed that absorptions arise from π–π ^?, MLCT, and d–d electron transitions. Fluorescence spectroscopy revealed moderate intercalative binding of these two complexes with EB–DNA, with apparent binding constant (K _app) values of 9.14?×?10⁵ and 3.20?×?10^5?M^?1 for Co(III) and Ni(II) complexes, respectively. UV–visible absorption spectra showed that the absorption of DNA at 260?nm was quenched for 2 but quenched then improved for 1 with addition of complexes, tentatively attributed to the effect of the combined intercalative binding and electrostatic interaction for 1.