Design of Broadband Single Fundamental Mode Hollow Core Bragg Fibre

The condition of the single fundamental mode （HE11） transmission in hollow core Bragg fibres is investigated theoretically by the transfer matrix method. The influences of core size and cladding parameters on the single HE11 mode bandwidth are analysed, showing that the maximal bandwidth is more sensitive to the core size than the cladding. The numerical results show that sufficiently broad bandwidth of single HE11 mode transmission can be achieved by proper fibre design. A simple and fast method based on improved hollow metal waveguide model is proposed to optimize fibre structure parameters for the maximal single HE11 mode bandwidth.     

Photoluminescence of Electrospun Poly-Methyl-Methacrylate:Alq3 Composite Fibres

Tris（8-hydroxyquinoline） aluminium doped poly-methyl-methacrylate （PMMA：Alq3） composite nanofibres are fabricated by electrospinning. The morphology of fibres is characterized by scanning electron microscopy. The photoluminescence of a series of the nanofibres with various contents of Alq3 to PMMA is investigated. UVvisible absorption and the PL spectra analysis are employed to analyse the interaction between the polymer and the luminescent molecule.     

Fluorescence Emission Centres and the Corresponding Infrared Fluorescence Saturation in a Bismuth-Doped Silica Fibre

We investigate the fluorescence characteristics of bismuth doped silica fibres with and without A1 co-dopant which are fabricated by means of modified chemical vapour deposition （MCVD） technique, and find that the fluorescences in the red region （centred around 750nm） and in the infrared region （centred around llOOnm） may originate from different emission sites in the fibre. Strong upconversion phenomena are observed in both Al-codoped and non A1 codoped bismuth fibres when the fibres are excited by an acoustic-optic Q-switched Nd：YVO4 laser. Both the aspects indicate that the upper energy level absorption reported in the work of the bismuth doped silica fibre lasers may result from the fluorescence emission sites that are not responsible for the infrared emission. It is thus expected that optimizing the compositions and the fabrication conditions of the fibre and then transferring more fluorescence emission centres are helpful for the infrared emission.     

Mass spectroscopic and degassing characteristics of polymeric materials for 157 nm photolithography

We report on the mass spectroscopic and the degassing characteristics of an epoxy novolac-based chemically amplified photoresist, with triphenylsulfonium hexafluoroantimonate as photoacid generator, using an F₂ pulsed discharge molecular laser at 157 nm. This photoresist has been used previously for optical (248 nm), e-beam, and X-ray microlithography both in wet and dry development processes. For laser energy of 1 mJ per pulse focused on the sample and 5 MW/cm² intensity, photofragments with m/e less than 40 amu have a higher probability of formation. These fragments are mainly attributed to the breaking of the substituents of the aromatic rings. The specific fragments observed are: H, H₂, C, CH, CH₂, CH₃, O, OH, H₂O, HF, C₂, C₂H, C₂H₂, C₂H₃, CO, C₂H₄, C₂H₅, C₂H₆, H₂CO, OCH₃, O₂, C₃H₃, C₃H₄, C₃H₅, C₃H₆, C₃H₇, C₂H₃O, C₃H₈, C₂H₅O, C₃O, C₃HO, C₃H₂O, C₃H₃O, C₃H₄O, C₃H₅O, C₂HO₂, C₂H₂O₂, C₂H₃O₂, C₂H₄O₂, C₂H₅O₂ and C₂H₆O₂. Comparison of these results with the ones obtained from samples with pure epoxy novolac polymer show that the direct fragmentation of the side polymer bonds is predominant over bond breaking arising from the presence of the triphenylsulfonium salt sensitizer.     

基于组分Ca2Pr2Cu5O10三元固溶区的范围和晶体结构

 利用X射线衍射分析和Rietveld结构精修方法研究了基于组分Ca₂Pr₂Cu₅O₁₀三元固溶区的范围和晶体结构。根据X射线分析结果和相消失法，为了保持Ca_2+xPr_2-xCu₅O₁₀结构单位晶胞中恒定的氧含量和电价平衡，基于组分Ca₂Pr₂Cu₅O₁₀的三元固溶区的范围可确定为：在Ca_2+xPr_2-xCu₅O₁₀固溶区的富Ca区（Ca/Pr>1），其表达式仍可以表示为一般的化学计量式Ca_2+xPr_2-xCu₅O₁₀（x=0.4, 0.2, 0）；在富Pr区（Ca/Pr<1），其表达式为Ca_1.7Pr_2.2·Cu₅O₁₀、Ca_1.4Pr_2.4Cu₅O₁₀，即：Ca_2+xPr_2-xCu₅O₁₀固溶区范围从Ca_2.4Pr_1.6Cu₅O₁₀至Ca_1.4Pr_2.4·Cu₅O₁₀。研究表明：基于组分Ca₂Pr₂Cu₅O₁₀的三元固溶体晶体结构可以看作是正交晶系NaCuO₂型亚晶胞的无公度相；Ca_2.4Pr_1.6Cu₅O₁₀亚晶胞的点阵常数为a₀=0.282 46(7) nm，b₀=0.636 93(1) nm，c₀=1.067 94(1) nm；其正交超结构的点阵常数为a=5a₀，b=b₀，c=5c₀。Ca_2.4Pr_1.6Cu₅O₁₀的结构也可以用单斜超晶胞来表述，该单斜超晶胞的空间群为P2₁/c，Z=4，a=5a₀，b=b₀，c=c₀/sin β，β=104.79°或136.60°，V=5a₀b₀c₀。在基于组分Ca₂Pr₂Cu₅O₁₀的三元固溶体晶体结构中，Ca和Pr之间在一定范围内是可以相互替代的，而且它们在结构中的占位是无序的。     

某些稀土氧化物的高温高压合成及其结构稳定性研究

 首次用高压高温方法，在3.2~4.0 GPa，1 000~1 300 ℃下，对CeO₂-R₂O₃（R=Eu，Gd），CeO₂-Tb₄O₁₁，Pr₆O₁₁-Tb₄O₇稀土氧化物进行合成实验，得到具有F型结构的CeEuO_3.5，CeGdO_3.5，CeTbO_3.5；B型结构的CeEuO₃，CeGdO₃，CeTbO₃，PrTbO₃和P型结构的PrTbO₃。PrTbO₃是迄今自然界尚未发现，文献未见报导过的新物质。对上面的产物和NdYbO₃、PrTmO₃，利用高、低温X射线衍射实验，检测了其结构的稳定性，结果指出：从300 ℃直到1 000 ℃，发生由B型CeRO_x向F型CeRO_x（R=Eu，Gd，Tb）、B型PrTbO₃向C型PrTbO₃的结构转变。F型CeRO_x属于氧缺位萤石型结构。     

MICROSCOPIC CALCULATION OF VISCOSITY COEFFICIENT IN HEAVY NUCLEI

A realistic calculation of the viscosity coefficients for ²³⁶U from ground equilibrium shape to saddle point is presented based on the linear response theory, in which the single particle spectra and wave function are provided by generalized Nilsson model. The dependence of viscosity coefficients γ_δ2δ2, γ_δ3δ3, γ_δ4δ4, γ_δ2δ3, γ_δ2δ4, γ_δ3δ4, on the collective variables δ₂, δ₃, δ₄ is studied at various values of the nuclear temperature with the smearing width Γ=0.1hω₀.     

Mass spectroscopy and ablation characteristics of nylon 6.6 in the ultraviolet

We report on the mass spectroscopic and the laser ablative characteristics of nylon 6.6 [-NH-(CH₂)₆-NH-CO-(-CH₂)₄-CO-] at 193 and 248 nm, using the ArF and KrF excimer lasers. The characteristic parameters of the laser ablative process, such as etch rate at different fluences, the threshold fluence, and the absorption coefficient for both wavelengths were determined. Even at low laser energy, there was a complete breaking of the polymeric chain bonds. The following photofragments were observed at 248 nm: H, H₂, C, CH, CH₂, N, NH, O, OH, H₂O, C₂H, C₂H₂, CN, C₂H₃, HCN, N₂, CO, C₂H₄, COH, C₂H₅, N₂H, NO, C₂H₆, H₂CO, N₂H₂, C₂, CH₂NH, O₂, C₃H₃, C₃H₄, C₃H₅, C₃H₆, CNO, HCNO, and H₂CNO. At 193 nm no photofragments were observed for m/e larger than 30 amu. The photofragments with two carbon atoms have a relatively higher probability to be dissociated from the parent monomer, than heavier photofragments with four carbon atoms. The mass spectroscopic studies and the absorption spectrum of nylon 6.6 in the ultraviolet, suggest photochemical bond-breaking at 248 and 193 nm. The monomer dissociates into fragments with the predominant mass at 28 amu for both laser wavelengths. Therefore the amide group is mainly involved in the photodissociation process of nylon 6.6 in the ultraviolet. The experimental results suggest that the photochemical dissociation of the polymeric chain is the dominant mechanism of the laser ablation of nylon 6.6 at 193 and 248 nm.     

Electronic Structure and Optical Properties of La-Doped SrTiO3 and Sr2TiO4 by Density Function Theory

The effect of La doping on the electronic structure and optical properties of SrTiO₃ and Sr₂TiO₄ is investigated by the first-principles calculation of plane wave ultrasoft pseudopotential based on the density function theory (DFT). The calculated results reveal that the electron doping in the case of Sr_0.875La_0.125TiO₃ and Sr_1.875La_0.125TiO₄ can be described within the rigid band model. The La³⁺ ions fully acts as electron donors in Sr_0.875La_0.125TiO₃ and Sr_1.875La_0.125TiO₄ systems and the Fermi level shifts further into the conduction bands (CBs) for Sr_1.875La_0.125TiO₄ compared to Sr_0.875La_0.125TiO₃. The two systems exhibit n-type degenerate semiconductor features. At the same time, the density of states (DOS) of the two systems shift towards low energies and the optical band gaps are broadened. The Sr_1.875La_0.125TiO₄ is highly transparent with the transmittance about 90% in the visible range, which is larger than that of Sr_0.875La_0.125TiO₃(85%). The wide band gap, small transition probability and weak absorption due to the low partial density of states (PDOS) of impurity in the Fermi level result in the optical transparency of the films...     

稀土焦绿石化合物R2Fe4/3W2/3O7的高温高压稳定性研究和X射线相分析

 本文利用X射线粉末衍射和位敏探测技术，研究了R₂Fe_4/3W_2/3O₇（R=Er、Yb、Dy）化合物经高温高压处理后的变化情况。在3.7 GPa，1 200 ℃条件下，六方相R₂Fe_4/3W_2/3O₇化合物按两种方式分解，而直接由R₂O₃，Fe₂O₃和WO₃原料出发，经上述同样的高温高压条件合成所得的产物与六方相高温高压分解产物相同，均为R₂WO₆、RFeO₃、WO₃和Fe₂O₃的多相聚合物。同时给出了R₂Fe_4/3W_2/3O₇六方相高温高压下的稳定区范围。     

（Na0.52K0.44Li0.04）Nb0.9-xSbxTa0.1O3 Lead-Free Piezoelectric Ceramics with High Performance and High Curie Temperature

（Na0.52K0.44Li0.04）Nb0.9-x Sbx Ta0.1O3 lead-free piezoelectric ceramics are prepared by a solid-state reaction method. With increasing Sb content, the transition temperature from orthorhombic to tetragonal polymorphic phase decreased. A composition （Na0.52K0.44Li0.04）Nb0.863Sb0.037Ta0.1O3 is found to possess excellent piezo- electric and electromechanical performances （d33 = 306pC/N, kp =48%, and kt=50%）, and high Curie temperature （Tc = 320 ℃）. These results indicate that （Na0.52K0.44Li0.04）Nb0.863Sb0.037 Ta0.1O3 is a promising lead-free piezoceramics replacement for lead zirconate titanate.     

高温超导体低温、高压下的物理性质的研究

 在3~20 GPa压力范围内，测量了含氧量较低的YBa₂Cu₃O_7-δ（δ=0.46）单晶压力增强效应（dT_c/dp=4.9KGPa^-1）；YBa₂Cu₃O₇（T_c0=90 K）单晶在压力下临界电流密度随压力变化；外磁场H=30 kO_e时，T_c与磁场、压力关系；压力达16.5 GPa下，Bi₂Sr₂CaCu₂O_x单晶T_c(p)关系（dT_c/dp=-0.4 KGPa^-1）。发现Y系高温超导体的温度压力导数dT_c/dp与T_c0中间呈dT_c/dp=b-mT_c0线性关系（b、m为常数）。结合压力下Y系超导体结构相变和含氧量对T_c影响，分析这类超导体T_c有很强的正压力效应的原因。把实验结果同几种超导电性微观理论模型进行了分析和比较。     

Properties of a New Nonlinear Optical Crystal CdZn2B2O6

Cadmium dizinc diborate （CdZn2B2O6） single crystals have been grown for the first time. The crystal structure of CdZn2B2O6 is the same as that of the Cd3Zn3B4O12. The x-ray diffraction, infrared and Raman spectra, differential scanning calorimetry analysis and density indicate that the physical and chemical properties of both crystals are very similar. Especially, the nonlinear optical coefficients of CdZn2B2O6 and Cd3Zn3B4O12 crystals are 2.6 and 2.4 times as large as that of KH2PO4 crystal respectively. Chemical etching experiments indicated that these crystals are very stable in neutral solution and not hygroscopic in air at room temperature.     

Quantitative ferroelectric characterization of single submicron grains in Bi-layered perovskite thin films

The local polarization state and the electromechanical properties of ferroelectric thin films can be probed via the converse piezoelectric effect using scanning force microscopy (SFM) combined with a lock-in technique. This method, denominated as piezoresponse SFM, was used to characterize at the nanoscale level ferroelectric SrBi₂Ta₂O₉ and Bi₄Ti₃O₁₂ thin films, grown by pulsed laser deposition. Two types of samples were studied: polycrystalline films, with grains having random orientations, and epitaxial films, consisting of (100)_orth- or (110)_orth-oriented crystallites, 100 nm to 2 7m in lateral size, which are embedded into a (001)-oriented matrix. The ferroelectric domain structure was imaged and the piezoelectric response under different external conditions was locally measured for each type of sample. Different investigation procedures are described in order to study the ferroelectric properties via the electromechanical response. A distinct ferroelectric behavior was found for single grains of SrBi₂Ta₂O₉ as small as 200 nm in lateral size, as well as for 1.2 7m쏿 nm crystallites of Bi₄Ti₃O₁₂. By probing separately the crystallites and the matrix the investigations have demonstrated at the nanoscale level that SrBi₂Ta₂O₉ has no spontaneous polarization along its crystallographic c-axis, whereas Bi₄Ti₃O₁₂ exhibits a piezoelectric behavior along both the a- and c-directions. The electrostriction coefficients were estimated to be 3᎒^-2 m⁴/C² for polycrystalline SrBi₂Ta₂O₉ and 7.7᎒^-3 m⁴/C² for c-orientedBi₄Ti₃O₁₂. Quantitative measurements at the nanoscale level, within the experimental errors give the same values for remanent polarization and coercive field as macroscopic ferroelectric measurements performed on the same samples.     

含硼条形金刚石的生成与成因探讨

 在1 470 ℃、5.9 GPa的高温高压条件下，由Fe₅₅Ni₂₉Co₁₆+B₄C体系合成出了十分规则的条形金刚石，这在人工合成金刚石实验中是少见的。并与Ni₇₀Mn₂₅Co₅+B₄C体系中的情形作了比较，探讨了条形金刚石的形成原因，其分析为获得实用性的条形金刚石提供了可能的途径。     

Interface microstructure in epitaxial YBa2Cu3Ox/PrBa2Cu3Ox/YBa2Cu3Ox ramp-type Josephson junctions

The interfaces in ramp-type YBa₂Cu₃O_x/PrBa₂Cu₃O_x/YBa₂Cu₃O_x Josephson junctions with different ramp slopes were characterized electrically and structurally. From the cross-sectional TEM images, it has been found that the epitaxy remains through all layers even on the ramp surface, providing the ramp angle is less than 45°. No big defects such as grain boundaries and secondary phases occurred at the interface. The major defects which appeared at the interface are antiphase boundaries which were formed by lattice shifts with c/3 unit between PrBa₂Cu₃O_x and YBa₂Cu₃O_x. The interface between YBa₂Cu₃O_x base-layer and PrBa₂Cu₃O_x barrier is more defective in comparison with that between PrBa₂Cu₃O_x barrier and top-layer. Alteration of the ramp slope from 10° to 45° leads to a significant increase in the density of defects near the base-YBa₂Cu₃O_x/PrBa₂Cu₃O_x interface. The average roughness of the ramp surface created by ion milling is about 10 nm, which seems insensitive to the ramp slope. The damaged ramp surface could be repaired during the subsequent deposition process, leading to a negligible interface resistance.     

固相线下Pr1-xBa2-yCax+yCu3O7±δ体系的相关系和晶体结构

 利用X射线衍射分析和Rietveld结构精修的方法研究了固相线下Pr_1-xBa_2-yCa_x+yCu₃O_7±δ体系的相关系和晶体结构。研究表明：950 ℃、空气条件下，Pr_1-xBa_2-yCa_x+yCu₃O_7±δ（y=0）体系系列样品总是含有两相：Pr123（PrBa₂Cu₃O_7±δ）和BaCuO₂；而且，随Ca含量的增加，杂相BaCuO₂的含量也随之增加。Pr_1-xBa_2-yCa_x+yCu₃O_7±δ（x=0）体系y=0.1、0.2、0.3、0.4的样品都只含有Pr123单相；y=0.5的样品含有3相：Pr123、Ca₂CuO₃和Pr₄Ca₁₀Cu₂₄O₄₁。另外，Pr_1-xBa_2-yCa_x+yCu₃O_7±δ（x=0）系列样品（y=0.1、0.2、0.3、0.4）中Pr123相还发生了正交-四方晶系的结构转化。y=0.1和0.2的样品为正交晶系，晶胞参数分别为a=0.390 33(4)和0.389 36(1) nm，b=0.389 53(4)和0.387 73(1) nm，c=1.173 38(4) 和1.168 20(2) nm；y=0.3和0.4的样品为四方晶系，晶胞参数分别为a=b=0.387 80(0) 和0.387 67(0) nm，c=1.166 00(2) 和1.165 20(2) nm。在Pr123结构中，Ba离子可以被Pr离子代替，但不能被Ca离子所代替。Ca离子占据部分Pr离子的位置。在Pr_1-xBa_2-yCa_x+yCu₃O_7±δ（x=0）体系中Pr、Ba和Ca离子间的相互替代中，离子半径比化学性质起到了更大的作用。在950 ℃、空气条件下，Ca离子在Pr_1-xBa_2-yCa_x+yCu₃O_7±δ体系中的最大溶解量是当x=0时，y≤0.4。     

Effect of In-Doping on Electronic Structure and Optical Properties of Sr2TiO4

The effect of In doping on the electronic structure and optical properties of Sr2 TiO4 is investigated by a firstprinciples calculation of plane wave ultrasoft pseudopotentials based on density functional theory. The calculated results reveal that corner-shared TiO6 octahedra dominate the main electronic properties of Sr2TiO4 and the covalency of the Ti-O（1） bond in the ab plane is stronger than that of the Ti-O（2） bond along the c-axis. After In doping, there is a little lattice expansion in Sr2In0.125 Ti0.875 O4 and the interaction between the Ti-O bond near the impurity In atom is weakened. The binding energies of Sr2TiO4 and Sr2In0.125Ti0.875O4 estimated from the electronic structure calculations indicate that the crystal structure of Sr2In0.125 Ti0.875 O4 is still stable after doping, but its stability is lower than that of undoped Sr2TiO4. Moreover, the valence bands （VBs） of the Sr2In0.125Ti0.875O4 system consist of O 2p and In 4d states, and the mixing of O 2p and In 4d states makes the top VBs shift significantly to high energies, resulting in visible light absorption. The adsorption of visible light is of practical importance for the application of St2 TiO4 as a photocatalyst.     

非晶铁基合金中两类不同的压磁效应

 本文详细介绍了在0.000 1~2.3 GPa流体静压力下测量三种非晶合金饱和磁感应强度B_s和最大磁导率μ_max的实验方法。实验结果表明：三种非晶合金受压后B_s和μ_max表现各异，可归为两大类。（1）第一类压磁效应：总趋势是B_s和μ_max都随压力增加而下降，但在几个压力区B_s反常增高。如Fe₇₅Ni₅Si₅B₁₅非晶合金B_s随压力增加均匀下降，(Fe_0.85Co_0.15)Cu_0.4Si_4.4B_13.2非晶合金的B_s随压力增加降—升—再降。（2）第二类压磁效应，如Fe_78.75Cu_1.25Si₅B₁₅非晶合金的B_s和μ_max随压力增加都有未见报导过的微弱升高。分别结合局域电子模型的交换作用理论和巡游电子模型的刚带理论进行了讨论。     

镁橄榄石和顽辉石的高温高压合成

 用国产六面顶压机,在温度为1 000～1 500 ℃和压力为2～5 GPa的高温高压条件下,对氧化镁（MgO）和二氧化硅（SiO₂）混合粉末样品进行了处理。通过对所得产物的观察与X射线衍射分析结果表明,在较宽的压力范围内,可以得到镁橄榄石（Mg₂SiO₄）单晶体和顽辉石（MgSiO₃）单晶体。讨论了地幔物质镁橄榄石（Mg₂SiO₄）和顽辉石（MgSiO₃）的生成条件、生长特性及相变关系。