一种新型超支化聚酯物理吸附涂层毛细管电泳柱的制备及其对碱性蛋白质的分离

采用一步法和准一步法合成了以季戊四醇为核的两个系列的超支化聚酯,利用红外光谱、羟值测定等手段对分子结构进行了表征。利用超支化聚合物低粘度的特点,用物理吸附方法将其涂于毛细管电泳柱内壁,使其在毛细管内壁上形成稳定的超支化聚酯涂层。该涂层在pH 3.0~7.0范围内能够有效地抑制电渗流和蛋白质在毛细管壁上的吸附,在pH 5.0的缓冲液中分离碱性蛋白质时,分离柱效可达105塔板/m,具有良好的分离效果。     

超支化聚酯化学键合涂层毛细管电泳柱的制备及碱性蛋白质的分离

用一步法和准一步法合成了以三羟甲基丙烷为核的两个系列的超支化聚酯,利用红外光谱、羟值测定等手段对其分子结构进行了表征。利用超支化聚合物低粘度的特点,采用化学键合的方法将其涂于石英毛细管电泳柱内壁,使其在毛细管内壁上形成稳定的超支化聚酯涂层。该涂层在pH 3.0~7.0范围内能够有效地抑制电渗流和碱性蛋白质在毛细管壁上的吸附。实验结果表明:该涂层柱在pH 5.0的磷酸缓冲溶液中,对碱性蛋白质的分离柱效可高达塔板数106/m。每次运行之间(n=6),天与天之间(n=3),以及柱与柱之间(N=3)的迁移时间的标准偏差(RSD%)在0.5%~1.5%之间,表明本方法制得的涂层柱具有良好的稳定性。     

超支化聚合物化学键合毛细管电泳柱的制备及其对蛋白质的分离行为

分别合成了以三羟甲基丙烷和季戊四醇为核的超支化聚(胺-酯),并对其进行了红外测定、羟值测定、粘度测定等表征。采用化学键合方法将其涂于毛细管内壁,并测定涂层柱的电渗流以及对碱性蛋白质的分离能力,结果表明,涂层柱能有效地抑制碱性蛋白质在毛细管内壁上的吸附,大大降低电渗流;以三羟甲基丙烷为核的超支化聚(胺-酯)涂层柱的塔板数达105/m,而以季戊四醇为核的超支化聚(胺-酯)涂层柱的分离柱效更高,塔板数达107/m。实验结果表明这两类涂层柱都具有较好的分离效果和稳定性。     

新型超支化聚合物涂层毛细管电泳柱的制备及评价

以 1,1,1 三羟甲基丙烷、丙烯酸甲酯和二乙醇胺为原料合成出超支化聚 (胺 酯 ) ,通过物理吸附方法将其涂布于熔融毛细管柱内表面 ;该方法制备的涂层柱能有效地抑制电渗流和蛋白质在毛细管壁的吸附作用 ;在pH 5 .0的缓冲液中 ,碱性蛋白质的平均柱效为 5 .1× 10 5理论塔板数 /m ,且涂层具有良好的稳定性     

聚合物涂层在毛细管电泳分离蛋白中的研究进展

毛细管电泳具有分析时间短,分离效率高,样品消耗量少等优点,在生物样品分离,特别是蛋白质分析领域有重要应用。然而,毛细管内壁硅羟基的解离给分离结果带来诸多不良影响。聚合物涂层能够抑制蛋白质在毛细管内壁的吸附以及调控电渗流,故对毛细管内壁进行有效修饰能够提高其对蛋白质的分离效率及分离稳定性。该文主要综述了动态及静态聚合物涂层毛细管的最新研究进展,并概述了近些年基于多巴胺/聚多巴胺发展起来的涂层毛细管的研究进展,最后展望了聚合物涂层毛细管的发展趋势。     

聚合物涂层技术在毛细管电泳分离蛋白质中的应用

影响毛细管电泳分离蛋白质效率和重现性的主要原因是毛细管壁对蛋白质的吸附.本文综述了解决这一问题的途径,包括极端pH值法、添加小分子添加剂、对毛细管内壁改性等方法,重点介绍并比较了用于毛细管内壁改性的两类聚合物涂层-化学键合和物理吸附的涂层.分别讨论了两类涂层在对电渗流的抑制和调节、对蛋白质吸附的阻止等方面的作用效果,并且对同种涂覆机理下不同聚合物的涂覆效果做了相关比较.总体上说,物理吸附的涂层比化学键合的涂层性能优越,因此在毛细管涂覆领域更受欢迎.尽管目前该领域的工作取得了较大进展,但仍未找到一种对所有种类蛋白质的分离都有效的普适性涂层,因此未来的一段时间内分离复杂组分的蛋白质仍面临着挑战.     

聚(2-甲基-2-噁唑啉)在毛细管电泳分离蛋白质中的应用

毛细管电泳作为一种常见的液相分离技术,因其分析速度快、分离效率高、样品消耗量少等特点,在蛋白质分离分析领域有广泛应用。然而,常用的熔融硅毛细管容易吸附蛋白质,导致电渗流不稳定,分离结果重现性变差;此外,商用毛细管电泳中常用的紫外检测器由于光程短,使得毛细管电泳的检测灵敏度往往不能达到低丰度蛋白质的直接分析要求。因此寻找能够阻止蛋白质吸附、同时能够提高检测灵敏度的涂层是毛细管电泳分离分析蛋白质的重要课题之一。聚（2-甲基-2-噁唑啉）（PMOXA）作为一种类肽类亲水性聚合物,具有与抗蛋白质吸附聚合物聚乙二醇类似的亲水性、抗蛋白质吸附性和生物相容性,而且其类肽结构使之具有较聚乙二醇更好的稳定性,因此近年来在生物质传递、药物载体和阻抗蛋白质吸附等领域得到越来越多的应用。该文主要从两个方面对聚（2-甲基-2-噁唑啉）在毛细管电泳中的应用进行了阐述。一是利用多巴胺作为黏合层将其涂覆在毛细管内壁作为抗蛋白质吸附涂层,这种涂层不仅能成功分离多种蛋白质的混合物（如溶菌酶、细胞色素C、核糖核酸酶A和α-胰凝乳蛋白酶原A）,而且在定量检测奶粉中三聚氰胺、乳铁蛋白的过程中,能阻抗其他蛋白质的非特异性吸附,提高了毛细管电泳对奶粉中三聚氰胺、乳铁蛋白的检测效率。二是将其与具有刺激响应性的聚合物（如聚丙烯酸）构成二元混合刷涂层,在一定的pH和离子强度条件下,涂层可吸附目标蛋白质（如牛血清白蛋白、溶菌酶）,在另一pH和离子强度条件下可将吸附的目标蛋白质全部释放,同时在释放过程中,处于涂层表面的聚（2-甲基-2-噁唑啉）会进一步阻止蛋白质的吸附,释放的蛋白质在电渗流和电泳的双重作用下快速迁移,到达检测器的蛋白质瞬时浓度大大增加,使目标蛋白质得到富集,目标蛋白质的检测信号得到放大,从而达到了提高低丰度蛋白质检测灵敏度的目的。此外,该文还对聚（2-甲基-2-噁唑啉）在毛细管电泳分离蛋白质中的未来发展趋势进行了展望。     

改性超支化聚硅碳烷物理吸附涂层毛细管柱的分离性能研究

利用羟丙基-β-环糊精对合成的超支化聚硅碳烷进行表面接枝改性,通过物理吸附的方法将改性后的超支化聚硅碳烷涂覆于毛细管柱内壁表面,制备出一种新型的毛细管电泳涂层柱.选用16 kV的分离电压、214 nm紫外检测波长、10 cm位差进样7 s和40 mmol/L磷酸盐缓冲体系为分离条件,考察氧氟沙星和扑尔敏两种手性异构体在涂层柱上的分离性能以及涂层柱的稳定性能.在pH 3.0时,对氧氟沙星的分离度为1.81,理论塔板数为4.68×104 plates/m;在连续进样100次后,分离度变化不大,理论塔板数下降率在15%以内,涂层柱运行稳定,各项性能均取得满意的效果.     

聚倍半硅氧烷复合超支化聚酯的结构及相容性

以三羟甲基丙烷(TMP)为内核, 二羟甲基丙酸(DMP)为支化单元用准一步法合成了重均分子量为12100的第四代端羟基脂肪族超支化聚酯G4, 并与聚甲基三乙氧基硅烷(PMSQ)共混制备出一系列不同质量分数的复合物. 利用固体核磁共振(NMR)等方法表征了各个样品的结构和反应程度, 并通过测量¹H T_1ρ值发现超支化聚酯与聚倍半硅氧烷之间具有较好的相容性, 相容尺寸为3~5 nm.     

聚(2-甲基-2-■唑啉)在毛细管电泳分离蛋白质中的应用

毛细管电泳作为一种常见的液相分离技术,因其分析速度快、分离效率高、样品消耗量少等特点,在蛋白质分离分析领域有广泛应用。然而,常用的熔融硅毛细管容易吸附蛋白质,导致电渗流不稳定,分离结果重现性变差;此外,商用毛细管电泳中常用的紫外检测器由于光程短,使得毛细管电泳的检测灵敏度往往不能达到低丰度蛋白质的直接分析要求。因此寻找能够阻止蛋白质吸附、同时能够提高检测灵敏度的涂层是毛细管电泳分离分析蛋白质的重要课题之一。聚(2-甲基-2-■唑啉)(PMOXA)作为一种类肽类亲水性聚合物,具有与抗蛋白质吸附聚合物聚乙二醇类似的亲水性、抗蛋白质吸附性和生物相容性,而且其类肽结构使之具有较聚乙二醇更好的稳定性,因此近年来在生物质传递、药物载体和阻抗蛋白质吸附等领域得到越来越多的应用。该文主要从两个方面对聚(2-甲基-2-■唑啉)在毛细管电泳中的应用进行了阐述。一是利用多巴胺作为黏合层将其涂覆在毛细管内壁作为抗蛋白质吸附涂层,这种涂层不仅能成功分离多种蛋白质的混合物(如溶菌酶、细胞色素C、核糖核酸酶A和α-胰凝乳蛋白酶原A),而且在定量检测奶粉中三聚氰胺、乳铁蛋白的过程中,能阻抗其他蛋白质的非特异性吸附,提高了毛细管电泳对奶粉中三聚氰胺、乳铁蛋白的检测效率。二是将其与具有刺激响应性的聚合物(如聚丙烯酸)构成二元混合刷涂层,在一定的pH和离子强度条件下,涂层可吸附目标蛋白质(如牛血清白蛋白、溶菌酶),在另一pH和离子强度条件下可将吸附的目标蛋白质全部释放,同时在释放过程中,处于涂层表面的聚(2-甲基-2-■唑啉)会进一步阻止蛋白质的吸附,释放的蛋白质在电渗流和电泳的双重作用下快速迁移,到达检测器的蛋白质瞬时浓度大大增加,使目标蛋白质得到富集,目标蛋白质的检测信号得到放大,从而达到了提高低丰度蛋白质检测灵敏度的目的。此外,该文还对聚(2-甲基-2-■唑啉)在毛细管电泳分离蛋白质中的未来发展趋势进行了展望。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.