Protein C recognition by ion‐coordinated imprinted monolithic cryogels

The protein C imprinted monolithic cryogel was synthesized using 2‐hydroxyethyl methacrylate by redox cryo‐polymerization method. The prepared monolithic cryogel was characterized by Fourier transform infrared spectroscopy, swelling test, surface area measurements, and scanning electron microscopy. The nonimprinted cryogel was prepared as well for control. Adsorption of protein C from aqueous solutions was investigated in a continuous mode and several parameters affecting adsorption performance were optimized. The maximum protein C adsorption amount was 30.4 mg/g. The selectivity studies were performed by monolithic column studies and fast protein liquid chromatography, using hemoglobin and human serum albumin as competing proteins. The relative selectivity coefficients were 2.37 and 8.89 for hemoglobin and human serum albumin, respectively. Reusability was tested for ten consecutive adsorption–desorption cycles, and no significant change in adsorption capacity was recorded. A pseudo‐second‐order model was suitable to interpret kinetic data, and the Langmuir model suited the adsorption isotherms well.     

Combined protein A imprinting and cryogelation for production of spherical affinity material

Cryogels have been demonstrated to be efficient when applied for protein isolation. Owing to their macroporous structure, cryogels can also be used for treating particle‐containing material, e.g. cell homogenates. Another challenging development in protein purification technology is the use of molecularly imprinted polymers (MIPs). These MIPs are robust and can be used repeatedly. The paper presents a new technology that combine the formation of cryogel beads concomitantly with making imprints of a protein. Protein A was chosen as the print molecule which was also be the target in the purification step. The present paper describes a new method to produce protein‐imprinted cryogel beads. The protein‐imprinted material was characterized and the separation properties were evaluated with regard to both the target protein and whole cells with target protein exposed on the cell surface. The maximum protein A adsorption was 18.1 mg/g of wet cryogel beads. The selectivity coefficient of protein A‐imprinted cryogel beads for protein A was 5.44 and 12.56 times greater than for the Fc fragment of IgG and protein G, respectively.     

A Crosslinked Carboxylic Acid Containing Cation Exchange Monolithic Cryogel for Human Serum Albumin Separation

For this work, we synthesized poly(N-isopropylacrylamide-acrylamide)-acrylic acid (poly(NIPAM-Am)-AAc) monolithic cryogel for a human serum albumin separation (HSA) from a protein mixture (human serum immunoglobulin, human serum albumin and lysozyme) and performed HSA adsorption studies using the cryogel to do continuous system experiments in a syringe column connected by a peristaltic pump. Poly(NIPAM-Am)-AAc with a pore size of 10–100 μm was produced by free radical polymerization that proceeded in an aqueous solution of monomers frozen inside a syringe column. The monolithic poly(NIPAM-Am)-AAc cryogel was characterized by performing swelling studies, FTIR and SEM that showed a swelling ratio of 6.2 g H₂O/g dry cryogel. The maximum HSA adsorption by the cryogel was 42.5 mg/g polymer at pH 4.0 in a 50 mM acetate buffer. We also studied the effect of two different temperatures (25 and 40°C). The higher temperature increased the adsorption capacity of the cryogel. HSA molecules could be reversibly adsorbed and desorbed five times with the same poly(NIPAM-Am)-AAc cryogel without a noticeable loss of their HSA adsorption capacity. The synthesized cryogel was used to separate albumin from the protein mixture. Adsorbed albumin was eluted by changing the pH of the buffer (pH 7.0 and 25°C). Poly(NIPAM-Am)-AAc monolithic cryogel behaved as a cation exchange column because of its functional carboxylic group.     

Highly selective separation and detection of cyromazine from seawater using graphene oxide based molecularly imprinted solid‐phase extraction

A novel molecularly imprinted polymer based on graphene oxide was prepared as a solid‐phase extraction adsorbent for the selective adsorption and extraction of cyromazine from seawater samples. The obtained graphene oxide molecularly imprinted polymer and non‐imprinted polymer were nanoparticles and characterized by scanning electron microscopy. The imprinted polymer showed higher adsorption capacity and better selectivity than non‐imprinted polymer, and the maximum adsorption capacity was 14.5 mg/g. The optimal washing and elution solvents for molecularly imprinted solid phase extraction procedure were 2 mL of acetonitrile/water (80:20, v/v) and methanol/acetic acid (70:30, v/v), respectively. The recoveries of cyromazine in the spiked seawater samples were in the range of 90.3–104.1%, and the relative standard deviation was <5% (n = 3) under the optimal procedure and detection conditions. The limit of detection of the proposed method was 0.7 μg/L, and the limit of quantitation was 2.3 μg/L. Moreover, the imprinted polymer could keep high adsorption capacity for cyromazine after being reused six times at least. Finally, the synthesized graphene oxide molecularly imprinted polymer was successfully used as a satisfied sorbent for high selectivity separation and detection of cyromazine from seawater coupled with high‐performance liquid chromatography.     

Theoretical design,preparation, and evaluation of Ginkgolide B molecularly imprinted polymers

Ginkgolide B is in great demand worldwide on account of its extensive and excellent pharmacological effects, however, it is difficult to separate and purify ginkgolide B. In this study, ginkgolide B molecularly imprinted polymers were prepared by combining software simulation and molecular imprinting technique, and its characterization and adsorption performed evaluation were performed to understand the adsorption behavior of the polymers. The adsorption equilibrium concentration of molecularly imprinted polymers was 0.70 mg/mL, and the adsorption equilibrium time was 4 h. Meanwhile, the adsorption isotherm of the polymers for ginkgolide B fitted well with the Langmuir model, and the adsorption kinetics was in line with the pseudo‐second‐order kinetics. In contrast, the adsorption capacity of molecularly imprinted polymers on ginkgolide B was higher than that of non‐molecular imprinted polymers, with better selectivity and better adsorption after repeated use for six times. The application experiments showed that molecular imprinted polymers have a good adsorption effect in low purity samples. Therefore, the polymers reported herein can be expected to apply in the adsorption and separation of ginkgolide B samples.     

Selective enrichment and separation of phosphotyrosine peptides by thermosensitive molecularly imprinted polymers

Novel thermosensitive molecularly imprinted polymers were successfully prepared using the epitope imprinting approach in the presence of the mimic template phenylphosphonic acid, the functional monomer vinylphosphonic acid‐Ti⁴⁺, the temperature‐sensitive monomer N‐isopropylacrylamide and the crosslinker N,N′‐methylenebisacrylamide. The ratio of the template/thermosensitive monomers/crosslinker was optimized, and when the ratio was 2:2:1, the prepared thermosensitive molecularly imprinted polymers had the highest imprinting factor. The synthetic thermosensitive molecularly imprinted polymers were characterized by Fourier transform infrared spectroscopy to reveal the combination and elution processes of the template. Then, the adsorption capacity and thermosensitivity was measured. When the temperature was 28°C, the imprinting factor was the highest. The selectivity and adsorption capacity of the thermosensitive molecularly imprinted polymers for phosphotyrosine peptides from a mixture of three tailor‐made peptides were measured by high‐performance liquid chromatography. The results showed that the thermosensitive molecularly imprinted polymers have good selectivity for phosphotyrosine peptides. Finally, the imprinted hydrogels were applied to specifically adsorb phosphotyrosine peptides from a sample mixture containing phosphotyrosine and a tryptic digest of β‐casein, which demonstrated high selectivity. After four rebinding cycles, 78.9% adsorption efficiency was still retained.     

Rapid determination of antiviral medication ribavirin in different feedstuffs using a novel magnetic molecularly imprinted polymer coupled with high‐performance liquid chromatography

A novel magnetic molecularly imprinted polymer adsorbing material was successfully synthesized to detect ribavirin in animal feedstuff. Molecularly imprinted polymer was prepared through surface polymerization by using ribavirin as template molecule, methyl methacrylate, and γ‐methacryloxypropyl trimethoxy silane functionalized magnetic mesoporous silica as bifunctional monomers, and ethylene diglycidyl ether as crosslinking agent. The prepared magnetic molecularly imprinted polymer was characterized by scanning electron microscopy and infrared spectroscopy. Static and dynamic adsorption experiments and selective adsorption analysis were performed to evaluate the adsorption and selectivity of magnetic molecularly imprinted polymer. Different experiments were conducted to optimize the magnetic solid‐phase extraction conditions. Under optimal experimental conditions, a magnetic molecularly imprinted solid‐phase extraction coupled with high‐performance liquid chromatography method was successfully developed for ribavirin detection. The established method achieved a satisfactory linear range of 0.20–50 mg/L (R² > 0.99) and a low detection limit (0.081 mg/kg). An average recovery of 92–105% with relative standard deviation of <6.5% was obtained upon the application of the developed method to detect ribavirin in real feedstuff samples. Thus, established method can be used for the rapid and simple separation and detection of added ribavirin in feedstuff.     

Preparing molecularly imprinted membranes by phase inversion to separate kaempferol

Molecularly imprinted membranes (MIMs) were studied to separate special target molecule – kaempferol, an important active pharmaceutical ingredient. The kaempferol MIM were prepared by the liquid–solid phase inversion method. The effects of polyphenylene sulfone, LiCl, and ZnCl₂ on membrane performance were studied, a high Flux MIM was prepared, then the kaempferol molecularly imprinted polymer membrane, non‐molecularly imprinted membrane, and non‐molecularly imprinted polymer membrane were prepared to investigate adsorption capacity. From adsorption isotherm curve, the maximum equilibrium adsorption quantity was 890 µg/g, and it was MIM. The MIM and molecularly imprinted polymer membrane give high selectivity towards kaempferol; the non‐molecularly imprinted membrane and non‐molecularly imprinted polymer membrane showed low adsorption quantity and selectivity. The reuse experiment of the MIM indicated that it has good reuse property. All the results showed binding sites were important in the separation process of MIMs. Copyright © 2016 John Wiley & Sons, Ltd.     

Molecularly imprinted polymer functionalized magnetic Fe3O4 for the highly selective extraction of triclosan

We present a facile strategy to prepare the molecularly imprinted polymers layer on the surface of Fe₃O₄ nanoparticles with core‐shell structure via sol–gel condensation for recognition and enrichment of triclosan. The Fe₃O₄ nanoparticles were first synthesized by a solvothermal method. Then, template triclosan was self‐assembled with the functional monomer 3‐aminopropyltriethoxysilane on the silica‐coated Fe₃O₄ nanoparticles in the presence of ethanol and water. Finally, the molecularly imprinted polymers were formed on the surface of silica‐coated Fe₃O₄ nanoparticles to obtain the product. The morphology, magnetic susceptibility, adsorption, and recognition property of magnetic molecularly imprinted polymers were characterized using transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffractometry, vibrating sample magnetometry, and re‐binding experiments. The magnetic molecularly imprinted polymers showed binding sites with good accessibility, fast adsorption rate, and high adsorption capacity (218.34 μg/g) to triclosan. The selectivity of magnetic molecularly imprinted polymers was evaluated by the rebinding capability of triclosan and two other structural analogues (phenol and p‐chlorophenol) in a mixed solution and good selectivity with an imprinting factor of 2.46 was obtained. The application of triclosan removal in environmental samples was demonstrated.     

A new ionic liquid surface‐imprinted polymer for selective solid‐phase‐extraction and determination of sulfonamides in environmental samples

Toward improving the selective adsorption performance of molecularly imprinted polymers in strong polar solvents, in this work, a new ionic liquid functional monomer, 1‐butyl‐3‐vinylimidazolium bromide, was used to synthesize sulfamethoxazole imprinted polymer in methanol. The resulting molecularly imprinted polymer was characterized by Fourier transform infrared spectra and scanning electron microscopy, and the rebinding mechanism of the molecularly imprinted polymer for sulfonamides was studied. A static equilibrium experiment revealed that the as‐obtained molecularly imprinted polymer had higher molecular recognition for sulfonamides (e.g., sulfamethoxazole, sulfamonomethoxine, and sulfadiazine) in methanol; however, its adsorption of interferent (e.g., diphenylamine, metronidazole, 2,4‐dichlorophenol, and m‐dihydroxybenzene) was quite low. ¹H NMR spectroscopy indicated that the excellent recognition performance of the imprinted polymer was based primarily on hydrogen bond, electrostatic and π‐π interactions. Furthermore, the molecularly imprinted polymer can be employed as a solid phase extraction sorbent to effectively extract sulfamethoxazole from a mixed solution. Combined with high‐performance liquid chromatography analysis, a valid molecularly imprinted polymer‐solid phase extraction protocol was established for extraction and detection of trace sulfamethoxazole in spiked soil and sediment samples, and with a recovery that ranged from 93–107%, and a relative standard deviation of lower than 9.7%.     

Novel molecularly imprinted polymers based on multiwalled carbon nanotubes with bifunctional monomers for solid-phase extraction of rhein from the root of kiwi fruit

A novel molecularly imprinted polymers based on multiwalled carbon nanotubes synthesized by precipitate polymerization was applied as a selective sorbent for separation and determination of rhein (4,5-dihydroxyanthraquinone-2-carboxylic acid) from the root of kiwi fruit samples coupled with high performance liquid chromatography (HPLC). The molecularly imprinted polymers were prepared with methacrylic acid and 4-vinylpyridine as bifunctional monomers. The chemical structure of the molecularly imprinted polymers was characterized by Fourier transform infrared spectrometer. The equilibrium rebinding experiment and competitive adsorption experiment showed that these imprinted polymers exhibited good adsorption ability toward rhein. The Langmuir adsorption equilibrium constant, K(m) , and theoretical maximum adsorption capacity, Q(m) , were estimated to be 0.43 and 6.77 mg g(-1) , respectively. Compared with molecularly imprinted polymers prepared with methacrylic acid or 4-vinylpyridine solely, the molecularly imprinted polymers synthesized with bifunctional monomers showed enhanced molecular imprinting effect and higher adsorption capacity for the template rhein. The performances of the molecularly imprinted polymers utilized as solid phase extraction sorbent were investigated in detail. The molecularly imprinted polymers prepared by the method proposed in this work could successfully apply to extraction and determination of rhein from the root of kiwi fruit samples coupled with HPLC.     

The Synthesis of Magnetic Lysozyme‐Imprinted Polymers by Means of Distillation–Precipitation Polymerization for Selective Protein Enrichment

A protein imprinting approach for the synthesis of core–shell structure nanoparticles with a magnetic core and molecularly imprinted polymer (MIP) shell was developed using a simple distillation–precipitation polymerization method. In this work, Fe₃O₄ magnetic nanoparticles were first synthesized through a solvothermal method and then were conveniently surface‐modified with 3‐(methacryloyloxy)propyltrimethoxylsilane as anchor molecules to donate vinyl groups. Next a high‐density MIP shell was coated onto the surface of the magnetic nanoparticles by the copolymerization of functional monomer acrylamide (AAm), cross‐linking agent N,N′‐methylenebisacrylamide (MBA), the initiator azodiisobutyronitrile (AIBN), and protein in acetonitrile heated at reflux. The morphology, adsorption, and recognition properties of the magnetic molecularly imprinted nanoparticles were investigated by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), vibrating sample magnetometer (VSM), and rebinding experiments. The resulting MIP showed a high adsorption capacity (104.8 mg g^?1) and specific recognition (imprinting factor=7.6) to lysozyme (Lyz). The as‐prepared Fe₃O₄@Lyz‐MIP nanoparticles with a mean diameter of 320 nm were coated with an MIP shell that was 20 nm thick, which enabled Fe₃O₄@Lyz‐MIP to easily reach adsorption equilibrium. The high magnetization saturation (40.35 emu g^?1) endows the materials with the convenience of magnetic separation under an external magnetic field and allows them to be subsequently reused. Furthermore, Fe₃O₄@Lyz‐MIP could selectively extract a target protein from real egg‐white samples under an external magnetic field.     

Determination of domoic acid in shellfish extracted by molecularly imprinted polymers

A selective sample cleanup method using molecularly imprinted polymers was developed for the separation of domoic acid (a shellfish toxin) from shellfish samples. The molecularly imprinted polymers for domoic acid was prepared by emulsion polymerization using 1,3,5‐pentanetricarboxylic acid as the template molecule, 4‐vinyl pyridine as the functional monomer, ethylene glycol dimethacrylate as the crosslinker, and Span80/Tween‐80 (1:1 v/v) as the composite emulsifiers. The molecularly imprinted polymer showed high affinity to domoic acid with a dissociation constant of 13.5 μg/mL and apparent maximum adsorption capacity of 1249 μg/g. They were used as a selective sorbent for the detection of domoic acid from seafood samples coupled with high‐performance liquid chromatography. The detection limit of 0.17 μg/g was lower than the maximum level permitted by several authorities. The mean recoveries of domoic acid from clam samples were 93.0–98.7%. It was demonstrated that the proposed method could be applied to the determination of domoic acid from shellfish samples.     

Efficient and selective separation of metronidazole from human serum by using molecularly imprinted magnetic nanoparticles

Magnetic molecularly imprinted nanoparticles were prepared through surface‐initiated reversible addition fragmentation chain transfer polymerization by using metronidazole as a template. The molecularly imprinted magnetic nanoparticles were characterized by attenuated total reflection Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, transmission electron microscopy, X‐ray diffraction, and vibrating sample magnetometry. The adsorption characteristics were also investigated and the kinetics of the adsorption of metronidazole on the imprinted nanoparticles were described by the second‐order kinetic model with the short equilibrium adsorption time (30 min). The adsorption isotherm was well matched with the Langmuir isotherm in which the maximum adsorption capacity was calculated to be 40.1 mg/g. Furthermore, the imprinted magnetic nanoparticles showed good selectivity as well as reusability even after six adsorption–desorption cycles. The imprinted magnetic nanoparticles were used as a sorbent for the selective separation of metronidazole from human serum. The recoveries of metronidazole from human serum changed between 97.5 and 99.8% and showed similar sensitivity as an enzyme‐linked immunoassay method. Therefore, the molecularly imprinted magnetic nanoparticles might have potential application for the selective and reliable separation of metronidazole from biological fluids in clinical applications.     

Molecularly imprinted cryogel as a pH-responsive delivery system for doxorubicin

In this study, implantable and degradable molecularly imprinted cryogel was prepared for pH-responsive delivery of doxorubicin. Cryogel discs were synthesized using amino acid-based functional monomer with HEMA and gelatin. The molecularly imprinted discs were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, degradation and swelling tests. In vitro delivery experiments were carried out in order to examine the effects of medium pH and drug content. The degree of degradation of composite cryogels was found to be 83.45±1.86% after 56 days. The release profiles of DOX from molecularly imprinted cryogel discs exhibit a biphasic delivery. It was observed that an initial burst release step from 0 to 12 h was followed by a slower and sustained release. Release rate of DOX from cryogel discs increased in more acidic conditions. Kinetic studies showed that a combination of diffusion and erosion control is mainly responsible from the general release behaviors of molecularly imprinted cryogel discs.     

Application of Supermacroporous Monolithic Hydrophobic Cryogel in Capturing of Albumin

Supermacroporous poly{2-hydroxyethyl methacrylate-co-[N,N-bis(2,6-diisopropylphenyl)-perylene-3,4,9,10-tetracarboxylic diimide]} [poly(HEMA-co-DIPPER)] monolithic cryogel column was prepared by radical cryocopolymerization of HEMA with DIPPER as functional comonomer and N,N′-methylene-bisacrylamide (MBAAm) as crosslinker directly in a plastic syringe for adsorption of albumin. The monolithic cryogel contained a continuous polymeric matrix having interconnected pores of 10–50 μm size. Poly(HEMA-co-DIPPER) cryogel was characterized by swelling studies, FTIR, scanning electron microscopy, and elemental analysis. The equilibrium swelling degree of the poly(HEMA-co-DIPPER) cryogel was 14.7 g H₂O/g dry cryogel. Poly(HEMA-co-DIPPER) cryogel was used in the adsorption/desorption of albumin from aqueous solutions. The nonspecific adsorption of albumin onto plain poly(HEMA) cryogel was very low (3.36 g/g polymer). The maximum amount of albumin adsorption from aqueous solution in acetate buffer was 40.9 mg/g polymer at pH 5.0. It was observed that albumin could be repeatedly adsorbed and desorbed with the poly(HEMA-co-DIPPER) cryogel without significant loss of adsorption capacity.     

Poly(amino acid)-based thermoresponsive molecularly imprinted magnetic nanoparticles for specific recognition and release of lysozyme

In this study, poly(amino acid)-based thermoresponsive molecularly imprinted magnetic nanoparticles for recognition and release of lysozyme was prepared via surface imprinting method. For constructing the molecularly imprinted polymer (MIP) layer, amino acid-based thermoresponsive monomer (N-methacryloyl-l-alanine methyl ester, MA-L-Ala-OMe) was mainly selected for the functional monomer along with N,N′-methylenebis(acrylamide) as the crosslinker. The resultant magnetic MIP nanoparticles were characterized in detail. Meanwhile, the dynamic light scattering studies and swelling ratios measurements were carried out for demonstrating the thermoresponsive property of the imprinted nanoparticles. The prepared magnetic MIP nanoparticles showed good adsorption capacity and selective recognition properties to lysozyme. Moreover, the fast adsorption process could reach equilibrium within 15 min. Importantly, the capture and release of lysozyme could be easily realized simply by altering the temperature of aqueous solution. Furthermore, the prepared imprinted nanoparticles were applied to separate lysozyme from the real egg white samples. The results proved that the thermoresponsive MIPs based on MA-L-Ala-OMe have great potential for selectively enriching target proteins in real samples.     

Removal of endocrine‐disrupting compounds from water using macroporous molecularly imprinted cryogels in a moving‐bed reactor

Highly efficient removal of endocrine‐disrupting compounds (EDCs) such as 17β‐estradiol (E2), 4‐nonylphenol (NP) and atrazine from water was achieved using a novel macroporous adsorption medium. The medium consisted of a macroporous poly(vinyl alcohol) (PVA) cryogel with molecularly imprinted polymer (MIP) particles embedded in it. The MIP was prepared using E2, NP and atrazine as templates. The macroporous composite molecularly imprinted cryogels were formed inside the open‐ended protective shells, known as Kaldnes carriers. These adsorbents (defined as Macroporous Gel Particles, MGPs) were evaluated on the removal of E2, NP and atrazine from water using different column configurations, namely column filled with the MGPs (packed‐bed column) and in moving‐bed reactors (defined here as moving‐bed MGPs reactor). Complete binding (> 99%) of E2 from a spiked aqueous solution (1 mg/L) was achieved using E2‐MIP/MGPs in a moving‐bed MGPs reactor at the retention time in the reactor of 4 min, while only 77% was bound to the nonimprinted medium (NIP/MGPs). Similar results were also obtained for the adsorption medium imprinted with atrazine. All contaminants studied (E2, atrazine and NP) were effectively removed from water at low (environmentally relevant) concentrations by the respective adsorption medium.     

Preparation and characterization of molecularly‐imprinted polymers for extraction of sanshool acid amide compounds followed by their separation from pepper oil resin derived from Chinese prickly ash (Zanthoxylum bungeanum)

Molecularly imprinted polymers were prepared using the molecular structure analogs of sanshool as template molecule, 2‐vinylpyridine and β‐cyclodextrin as double functional monomers, ethylene dimethacrylate as cross linker, and azobisisobutyronitrile as initiator. The structural characteristics of the polymers were determined by Fourier‐transform infrared spectroscopy and scanning electron microscopy. Dynamic adsorption and isothermal adsorption were also investigated. The molecularly imprinted polymers were used to prepare a molecularly imprinted solid‐phase extraction column in order to separate acid amide components from pepper oil resin derived from Chinese prickly ash (Zanthoxylum bungeanum). After eluting, the percentage of acid amide components was enhanced to 92.40 ± 1.41% compared with 23.34 ± 1.21% in the initial pepper oil resin, indicating good properties of purification of molecularly imprinted polymers and potential industrial application.     

Photo‐stimulated “turn‐on/off” molecularly imprinted polymers based on magnetic mesoporous silicon surface for efficient detection of sulfamerazine

In this study, novel photo‐stimulated molecularly imprinted polymers based on magnetic mesoporous carrier surface were developed for selective identification and intelligent separation of sulfamerazine in complex samples. The photosensitive monomer of the molecularly imprinted polymers was azobenzene derivative 5‐[(4‐(methacryloyloxy)phenyl) diazenyl] isophthalic acid with stimulus reaction mechanisms, which has photoisomerization between trans and cis for N=N bonds. Further, the properties of the photo‐stimulated molecularly imprinted polymers were further evaluated through several sets of adsorption experiments. It illustrated that the maximum adsorption amount is 0.45 mmol/L. By ultraviolet spectrophotometry, the material reaches typical characteristic peaks of photo sensitivity, and the cycle time is 16 min. Three adsorption and desorption processes were repeated, the adsorption rate reached 34.4%. Overall, the photo‐stimulated molecularly imprinted polymers can enrich and separate determine sulfamerazine with high selectivity, which have good recovery for real samples.