A facile and efficient one‐step strategy for the preparation of β‐cyclodextrin monoliths

A novel, facile, and efficient one‐step copolymerization strategy was developed for the preparation of β‐cyclodextrin (β‐CD) methacrylate monolithic columns using click chemistry. The novel mono‐(1H‐1,2,3‐triazol‐4‐ylmethyl)‐2‐methylacryl‐β‐CD monomer was synthesized by a click reaction between propargyl methacrylate and mono‐6‐azido‐β‐CD, and then monolithic columns were prepared through a one‐step in situ copolymerization of the mono‐(1H‐1,2,3‐triazol‐4‐ylmethyl)‐2‐methylacryl‐β‐CD monomer and ethylene dimethacrylate. The physicochemical properties and column performance of the fabricated monolithic columns were characterized by elemental analysis, SEM, and micro‐HPLC. Satisfactory column permeability, efficiency, and separation performance were obtained for the optimized poly(mono‐(1H‐1,2,3‐triazol‐4‐ylmethyl)‐2‐methylacryl‐β‐CD‐co‐ethylene dimethacrylate) monolithic columns. Additionally, typical hydrophilic interaction chromatography retention behavior was observed on the monoliths at high acetonitrile content in the mobile phase. Although the enantioselectivity of our monolithic columns did not meet the level of other reported β‐CD monolithic columns, this one‐step strategy based on click chemistry still provides an interesting and effective model as it offers the possibility to easily prepare related novel CD methacrylate monoliths through a one‐step copolymerization strategy.     

Comparative evaluation of a one‐pot strategy for the preparation of β‐cyclodextrin‐functionalized monoliths: Effect of the degree of amino substitution of β‐cyclodextrin on the column performance

To further evaluate the feasibility and applicability of the one‐pot strategy in monolithic column preparation, two novel β‐cyclodextrin‐functionalized organic polymeric monoliths were prepared using two β‐cyclodextrin derivatives, i.e. mono(6‐amino‐6‐deoxy)‐β‐cyclodextrin and heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin. In this improved method, mono(6‐amino‐6‐deoxy)‐β‐cyclodextrin or heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin reacted with glycidyl methacrylate to generate the corresponding functional monomers and were subsequently copolymerized with ethylene dimethacrylate. The polymerization conditions for both monoliths were carefully optimized to obtain satisfactory column performance with respect to column efficiency, reproducibility, permeability, and stability. The obtained poly(glycidyl methacrylate‐mono(6‐amino‐6‐deoxy)‐β‐cyclodextrin‐co‐ethylene dimethacrylate) and poly(glycidyl methacrylate‐heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin‐co‐ethylene dimethacrylate) monoliths exhibited a uniform structure, good permeability, and mechanical stability as indicated by scanning electron microscopy and micro‐high‐performance liquid chromatography experimental results. Because of the probable existence of multi‐glycidyl methacrylate linking spacers on the poly(glycidyl methacrylate‐heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin‐co‐ethylene dimethacrylate) monolith, the effect of the ratio of glycidyl methacrylate/heptakis(6‐amino‐6‐deoxy)‐β‐cyclodextrin was especially studied, and satisfactory reproducibility could still be achieved by strictly controlling the composition of the polymerization mixture. To investigate the effect of the degree of amino substitution of β‐cyclodextrin on column performance, a detailed comparison of the two monoliths was also carried out using series of analytes including small peptides and chiral acids. It was found that the β‐cyclodextrin‐functionalized monolith with mono‐glycidyl methacrylate linking spacers demonstrated better chiral separation performance than that with multi‐glycidyl methacrylate linking spacers.     

Effect of fabrication strategy on the enantioseparation performance of β‐cyclodextrin‐functionalized polymethacrylate monoliths: A comparative evaluation

To evaluate the effect of the preparation strategy on the enantioseparation performance of β‐cyclodextrin‐functionalized monoliths, a series of β‐cyclodextrin‐functionalized organic polymeric monolithic columns were prepared through two‐step, single‐step, and one‐pot approaches, using the same cyclodextrin, linker–spacer, and crosslinker. Physicochemical characterization of the columns was carried out by determining the morphology, β‐cyclodextrin density, permeability, and chromatographic efficiency. For each type of monolithic column, the enantioresolution of 22 chiral compounds, including mandelic acid derivatives, nonsteroidal anti‐inflammatory drugs, N‐derivatized amino acids, and herbicides, was comparatively studied under optimum chromatographic conditions. The β‐cyclodextrin‐functionalized monolithic columns prepared through the one‐pot approach exhibited higher enantioresolution for most chiral compounds, and they have the advantage of good controllability and simple preparation. On the other hand, the enantioresolution obtained on columns prepared through the single‐step approach was quite unsatisfactory, and therefore the effect of using different linking spacers and crosslinkers was studied. A significant improvement of enantioresolution for 2‐chloro‐mandelic acid was obtained by using N ,N‐methylenebisacrylamide instead of ethylene dimethacrylate as the crosslinker in the single‐step preparation.     

Preparation of cyclodextrin‐modified monolithic hybrid columns for the fast enantioseparation of hydroxy acids in capillary liquid chromatography

Cyclodextrins and their derivatives are one of the most common and successful chiral selectors. However, there have been few publications about the use of cyclodextrin‐modified monoliths. In this study, organic hybrid monoliths were prepared by the immobilization of derivatized β‐cyclodextrin alone or with l‐ 2‐allylglycine hydrochloride to the polyhedral oligomeric silsesquioxane methacryl substituted monolith. The main topic of this study is a combined system with dual chiral selectors (l‐ 2‐allylglycine hydrochloride and β‐cyclodextrin) as monolithic chiral stationary phase. The effect of l‐ 2‐allylglycine hydrochloride concentration on enantioseparation was investigated. The enantioseparation of the four acidic compounds with resolutions up to 2.87 was achieved within 2.5 min on the prepared chiral monolithic column in capillary liquid chromatography. Moreover, the possible mechanism of enantioseparation was discussed.     

One‐pot preparation of mercaptotetrazole‐silica hybrid monoliths by the thiol‐ene click reaction for mixed‐mode capillary liquid chromatography

A novel mercaptotetrazole‐silica hybrid monolithic column was prepared for capillary liquid chromatography, in which the thiol‐end mercaptotetrazole was mixed with hydrolyzed γ‐methacryloxypropyltrimethoxysilane and tetramethyloxysilane for the co‐polycondensation and thiol‐ene click reaction in a one‐pot process. The effects of the molar ratio of silanes, the amount of mercaptotetrazole, and the volume of porogen on the morphology, permeability and pore properties of the as‐prepared mercaptotetrazole‐silica hybrid monoliths were investigated in detail. A series of test compounds including alkylbenzenes, amides and anilines were employed for evaluating the retention behaviors of the mercaptotetrazole‐silica hybrid monolithic columns. The results demonstrated that the mercaptotetrazole‐silica hybrid monoliths exhibited hydrophobic, hydrophilic as well as ion‐exchange interaction. The run‐to‐run, column‐to‐column and batch‐to‐batch reproducibilities of the mercaptotetrazole‐silica hybrid monoliths were satisfactory with the relative standard deviations less than 1.4 (n  = 5), 3.9 (n  = 3) and 4.0% (n  = 5), respectively. In addition, the mercaptotetrazole‐silica hybrid monolith was further applied to the separation of sulfonamides, nucleobases and protein tryptic digests. These successful applications confirmed the promising potential of the mercaptotetrazole‐silica hybrid monolith in the separation of complex samples.     

Incorporation of metal‐organic framework amino‐modified MIL‐101 into glycidyl methacrylate monoliths for nano LC separation

Metal‐organic frameworks consisting of amino‐modified MIL‐101(M: Cr, Al, and Fe) crystals have been synthesized and subsequently incorporated to glycidyl methacrylate monoliths to develop novel stationary phases for nano‐liquid chromatography. Two incorporation approaches of these materials in monoliths were explored. The metal‐organic framework materials were firstly attached to the pore surface through reaction of epoxy groups present in the parent glycidyl methacrylate‐based monolith. Alternatively, NH₂‐MIL‐101(M) were admixed in the polymerization mixture. Using short time UV‐initiated polymerization, monolithic beds with homogenously dispersed metal‐organic frameworks were obtained. The chromatographic performance of embedded UV‐initiated composites was demonstrated with separations of polycyclic aromatic hydrocarbons and non‐steroidal anti‐inflammatory drugs as test solutes. In particular, the incorporation of the NH₂‐MIL‐101(Al) into the organic polymer monoliths led to an increase in the retention of all the analytes compared to the parent monolith. The hybrid monolithic columns also exhibited satisfactory run‐to‐run and column‐to‐column reproducibility.     

Preparation of polymeric monoliths by copolymerization of acrylate monomers with amine functionalities for anion-exchange capillary liquid chromatography of proteins

Two novel polymeric monoliths for anion-exchange capillary liquid chromatography of proteins were prepared in a single step by a simple photoinitiated copolymerization of 2-(diethylamino)ethyl methacrylate and polyethylene glycol diacrylate (PEGDA), or copolymerization of 2-(acryloyloxy)ethyl trimethylammonium chloride and PEGDA, in the presence of selected porogens. The resulting monoliths contained functionalities of diethylaminoethyl (DEAE) as a weak anion-exchanger and quaternary amine as a strong anion-exchanger, respectively. An alternative weak anion-exchange monolith with DEAE functionalities was also synthesized by chemical modification after photoinitiated copolymerization of glycidyl methacrylate (GMA) and PEGDA. Important physical and chromatographic properties of the synthesized monoliths were characterized. The dynamic binding capacities of the three monoliths (24 mg/mL, 56 mg/mL and 32 mg/mL of column volume, respectively) were comparable or superior to values that have been reported for various other monoliths. Chromatographic performance was also similar to that provided by a modified poly(GMA-ethylene glycol dimethacrylate) monolith. Separation of standard proteins was achieved under gradient elution conditions using these monolithic columns. Peak capacities of 34, 58 and 36 proteins were obtained with analysis times of 20–30 min. This work represents a successful attempt to prepare functionalized monoliths via direct copolymerization of monomers with desired functionalities. Compared to earlier publications, additional surface modifications were avoided and the PEGDA crosslinker helped to improve the biocompatibility of the monolithic backbone.     

Ring‐opening metathesis polymerization‐derived,lectin‐functionalized monolithic supports for affinity separation of glycoproteins

Lectin‐functionalized monolithic columns were prepared within polyether ether ketone (PEEK) columns (150 × 4.6 mm id) via transition metal‐catalyzed ring‐opening metathesis polymerization of norborn‐2‐ene (NBE) and trimethylolpropane‐tris(5‐norbornene‐2‐carboxylate) (CL) using the first‐generation Grubbs initiator RuCl₂(PCy₃)₂(CHPh) (1, Cy = cyclohexyl) in the presence of a macro‐ and microporogen, i.e. of 2‐propanol and toluene. Postsynthesis functionalization was accomplished via in situ grafting of 2,5‐dioxopyrrolidin‐1‐yl‐bicyclo[2.2.1]hept‐5‐ene‐2‐carboxylate to the surface of the monoliths followed by reaction with α,ω‐diamino‐poly(ethyleneglycol). The pore structure of the poly(ethyleneglycol)‐ derivatized monoliths was investigated by electron microscopy and inverse‐size exclusion chromatography, respectively. The amino‐poly(ethyleneglycol) functionalized monolithic columns were then successfully used for the immobilization of lectin from Lens culinaris hemagglutinin. The thus prepared lectin‐functionalized monoliths were applied to the affinity chromatography‐based purification of glucose oxidase. The binding capacity of Lens culinaris hemagglutinin‐immobilized monolithic column for glucose oxidase was found to be 2.2 mg / column.     

Preparation of monolithic polymers with controlled porous properties for microfluidic chip applications using photoinitiated free‐radical polymerization

A broad variety of monolithic macroporous polymers with both controlled chemistry and porous properties was prepared using UV‐initiated free‐radical polymerization. The chemistry of the monoliths is defined by the composition of the monomer mixture used for the polymerization. The use of functional methacrylate monomers such as glycidyl methacrylate, 2‐hydroxyethyl methacrylate, butyl methacrylate, 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid, and [2‐(methacryloyloxy) ethyl] trimethylammonium chloride enabled the preparation of monoliths with reactive, hydrophilic, hydrophobic, and ionizable functionalities, respectively. The porous properties of these monoliths were mainly affected by the choice of the porogenic solvent system. Because the UV polymerization was carried out at room temperature, even low molecular weight alcohols and other low boiling point solvents could safely be used to create a versatile series of binary porogenic mixtures. Monoliths were prepared in spatially defined positions using the photolithographic technique within a fused silica capillary and on microfluidic chips, and the former was demonstrated with the separation of derivatized amines by means of capillary electrochromatography in the reversed‐phase mode. Similarly, a monolith prepared in the microchip format was used to demonstrate a microextraction with enrichment of a solution of green fluorescent protein by a factor of 1000. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 755–769, 2002; DOI 10.1002/pola.10155     

Post‐polymerization modification of a new reactive monolith for reversed phase and hydrophilic interaction capillary electrochromatography of neutral,polar, and biologically active compounds

A reactive monolith based on the polymerization of 3‐chloro‐2‐hydroxypropyl methacrylate, (HPMA‐Cl), with a crosslinking agent, ethylene glycol dimethacrylate (EDMA), was synthesized and post‐functionalized with a macromolecular ligand polyethyleneimine. Monolithic columns with controlled permeability and pore structure were prepared by free radical polymerization in the presence of a binary porogenic mixture of isopropanol and decanol. The presence of chloropropyl functionality in the pristine monolith allowed the synthesis of a post‐fuctionalized monolith carrying cationic groups that was used to control the magnitude of electroosmotic flow (EOF) in electrochromatographic separation. In the synthesis of pristine monoliths, the feed concentration of functional monomer (ie, HPMA‐Cl) was changed between 30 and 60 v/v % for obtaining cationic monoliths providing satisfactory electrochromatographic separation. The best electrochromatographic performance was obtained with the polyethyleneimine functionalized monolith prepared by using the pristine monolith obtained by 60% (v/v) monomer concentration. This monolith was used in reversed phase and hydrophilic interaction capillary electrochromatography modes for the separation of alkylbenzenes, polycyclic aromatic hydrocarbons, phenols, and nucleosides, using mobile phases with low acetonitrile (ACN) contents ranging between 20% and 35% (v/v). This ACN range was remarkably lower than the content of ACN used on the hydrophilic polymethacrylate‐based monoliths reported previously (ie, >90%). The plate heights up to 5.3 μm were obtained for the separation of nucleosides with the environmental friendly mobile phases whose ACN contents were also remarkably lower than that of similar polymethacrylate‐based monoliths.     

Fabrication of an ionic‐liquid‐based polymer monolithic column and its application in the fractionation of proteins from complex biosamples

An ionic‐liquid‐based polymer monolithic column was synthesized by free radical polymerization within the confines of a stainless‐steel column (50 mm × 4.6 mm id). In the processes, ionic liquid and stearyl methacrylate were used as dual monomers, ethylene glycol dimethacrylate as the cross‐linking agent, and polyethylene glycol 200 and isopropanol as co‐porogens. Effects of the prepolymerization solution components on the properties of the resulting monoliths were studied in detail. Scanning electron microscopy, nitrogen adsorption–desorption measurements, and mercury intrusion porosimetry were used to investigate the morphology and pore size distribution of the prepared monoliths, which showed that the homemade ionic‐liquid‐based monolith column possessed a relatively uniform macropore structure with a total macropore specific surface area of 44.72 m²/g. Compared to a non‐ionic‐liquid‐based monolith prepared under the same conditions, the ionic‐liquid‐based monolith exhibited excellent selectivity and high performance for separating proteins from complex biosamples, such as egg white, snailase, bovine serum albumin digest solution, human plasma, etc., indicating promising applications in the fractionation and analysis of proteins from the complex biosamples in proteomics research.     

A strong inorganic acid‐initiated methacrylate polymerization strategy for room temperature preparation of monolithic columns for capillary electrochromatography

A facile strong inorganic acid‐initiated methacrylate polymerization strategy was developed for fabricating monolithic columns at room temperature. The prepared monoliths were characterized by FTIR spectrometry, mercury intrusion porosimeter and SEM, while their performance was evaluated by CEC for the separation of various types of compounds including alkyl benzenes, polycyclic aromatic hydrocarbons, nonsteroidal anti‐inflammatory drugs, anilines, and nitrophenol isomers. The column‐to‐column and batch‐to‐batch reproducibility for the prepared monoliths in terms of the RSD of EOF flow velocity, retention factor, and the minimum plate height of naphthalene ranged from 3.4 to 12.4%. The fabricated monoliths gave excellent performance for the separation of the test neutral compounds with the theoretical plates of 170 000–232 000 plates per meter for thiourea, and 77 400–112 300 plates per meter for naphthalene. The proposed strong inorganic acid‐initiated methacrylate polymerization strategy is a promising alternative for fabricating organic polymer‐based monoliths.     

Preparation of a polyhedral oligomeric silsesquioxanes hybrid monolith via a single‐step ring‐opening polymerization for pressurized capillary electrochromatography

An organic‐silica hybrid monolith was prepared by a single‐step ring‐opening polymerization of octaglycidyldimethylsilyl polyhedral oligomeric silsesquioxane (POSS‐epoxy), polyethylenimine (PEI), and β‐cyclodextrin (β‐CD) in a ternary porogenic solvent consisting of polyethylene glycol, 1,4‐butanediol, and 1‐propanol. The framework of POSS‐PEI hybrid monolith could offer well‐defined 3D skeleton, while β‐CD with the ability of forming a host‐guest inclusion complexes with a variety of compounds could show an ability of specific selection. The obtained hybrid monoliths were successfully applied for separation of phenols, benzoic acids, and nucleobases. Especially due to the introduction of β‐CD, positional isomers including hydroquinone and resorcinol, o‐nitrophenol and p‐nitrophenol, as well as p‐chlorophenol and o‐chlorophenol were baseline separated and the column efficiency reached 82 300 plates/m for hydroquinone.     

Polymer monolithic capillary column fabricated by using monodisperse iron oxide nanocrystal template to enhance the electrochromatographic separation of small molecules

Monodisperse iron oxide nanocrystals and organic solvents were utilized as coporogens in monolithic poly(glycidyl methacrylate‐co‐ethylene glycol dimethacrylate) capillary columns to afford stationary phases with enhanced electrochromatographic performance of small molecules. While the conventional monoliths using organic solvents only as a porogen exhibited poor resolution (Rs) <1.0 and low efficiency of 40 000–60 000 plates/m, addition of a small amount of nanocrystals to the polymerization mixture provided increased resolution (Rs > 3.0) and high efficiency ranged from 60 000 to 100 000 plates/m at the same linear velocity of 0.856 mm/s. It was considered that the mesopores introduced by the nanocrystals played an important role in the improvement of the monolith performance. This new strategy expanded the application range of the hydrophobic monoliths in the separation of polar alkaloids and narcotics. The successful applications demonstrated that the glycidyl methacrylate based monoliths prepared by using nanocrystal template are a good alternative for enhanced separation efficiency of small molecules.     

Porous Monoliths: Stationary Phases of Choice for High Performance Liquid Chromatography in Various Formats

 Modern porous monoliths have been conceived as a new class of stationary phases for high performance liquid chromatography (HPLC) in classical columns in the early 1990s and later extended to the capillary format. These monolithic materials are prepared using simple processes carried out in an external mold (inorganic monoliths) or within the confines of the column (organic monoliths and all capillary columns). These methods afford macroporous materials with large through-pores that enable applications in a rapid flow-through mode. Since all the mobile phase must flow through the monolith, the convection considerably accelerates mass transport within the monolithic separation medium and improves the separations. As a result, the monolithic columns perform well even at very high flow rates. The applications of monolithic capillary columns are demonstrated on numerous separations in the HPLC mode.     

New vinylester‐based monoliths as a new stationary phase for capillary electrochromatography

Vinyl ester‐based monoliths are proposed as a new group of stationary phase for CEC. The capillary monolithic columns were prepared by using two vinyl ester monomers, vinyl pivalate (VPV), and vinyl decanoate (VDC) by using ethylene dimethacrylate (EDMA) as the cross‐linking agent, and 2‐acrylamido‐2‐methylpropane sulfonic acid as the charge‐bearing monomer. The monoliths with different pore structures and permeabilities were obtained by varying the type and composition of the porogen mixture containing isoamyl alcohol and 1,4‐butanediol. The electrochromatographic separation of alkylbenzenes was successfully performed by using an acetonitrile/aqueous buffer system as the mobile phase in a CEC system. Vinyl ester monoliths with short alkyl chain length (i.e. poly(VPV‐co‐EDMA) exhibited better separation performance compared with the monolith with long alkyl chain length (i.e. poly(VDC‐co‐EDMA). In the case of VPV‐based monoliths, the theoretical plate numbers higher than 250 000 plates/m were achieved by using a porogen mixture containing 33% v/v of isoamyl alcohol. For both VDC and VPV‐based monoliths, the column efficiency was almost independent of the superficial velocity in the range of 2–12 cm/min.     

Organic–inorganic hybrid fluorous monolithic capillary column for selective solid‐phase microextraction of perfluorinated persistent organic pollutants

A novel construction strategy of monolithic capillary column for selectively enriching perfluorinated persistent organic pollutants was proposed. The organic–inorganic hybrid fluorous monolithic capillary column was synthesized by a “one‐pot” approach via the polycondensation of γ‐methacryloxypropyltrimethoxy‐silane, then in situ copolymerization of 1H,1H,7H‐dodecafluoroheptyl methacrylate and vinyl group on the precondensed siloxanes. The obtained monolithic columns were systematically characterized. The results demonstrated that the optimal column possessed good mechanical stability and high permeability. The adsorption capacities of the optimized monolithic column for perfluorooctanoic acid and perfluorooctane sulfonate were 0.257 and 0.513 μg/mg, respectively. Adsorption capacities of the monoliths were proved to increasing with increasing the amounts of fluorinated monomers in the fluorous monoliths. Sodium 1‐octanesulfonate, as a comparison compound, was hardly adsorbed on the fluorous monolith. In addition, the trace amounts of perfluorooctanoic acid and perfluorooctane sulfonate in water samples can be successfully concentrated about 160 times to their original concentrations by this monolithic column. These results demonstrated that the capacity and selectivity of the affinity fluorous column is high and can be applied to the selective enrichment for the perfluorinated persistent organic pollutants from environmental samples.     

Advances in capillary electrochromatography and micro-high performance liquid chromatography monolithic columns for separation science

Over the last decade, monoliths or continuous beds have emerged as an alternative to traditional packed-bed columns for use in capillary electrochromatography (CEC) and micro-high performance liquid chromatography (micro-HPLC). Monolithic columns can be divided into two categories: silica-based monolithic columns and rigid organic polymer-based monolithic columns resulting from the polymerization of acrylamide, styrene, acrylate or methacrylate monomers. In this paper, the chemistry and most recent applications of these various types of monoliths in both CEC and micro-HPLC are presented.     

Design of a ruthenium(III) immobilized affinity material based on a β‐cyclodextrin‐functionalized poly(glycidyl methacrylate‐ethylene dimethacrylate) monolith for the enrichment of hippuric acid

Immobilized metal affinity chromatography has drawn great attention as a widespread separation and purification approach. In this work, ruthenium was firstly introduced into the preparation of immobilized metal affinity chromatography considering its affinity to N,O‐donor ligands. A β‐cyclodextrin‐functionalized poly(glycidyl methacrylate‐ethylene dimethacrylate) monolith was designed and employed as the supporting material in immobilized metal affinity chromatography. Thiosemicarbazide was introduced into the synthesis process, which not only acted as a bridge between β‐cyclodextrin and glycidyl methacrylate, but also chelated with ruthenium because of its mixed hard‐soft donor characteristics. The developed monolithic ruthenium(III)‐immobilized metal affinity chromatography column was utilized for the adsorption and separation of hippuric acid, a biological indicator of toluene exposure. To achieve high extraction capacity, the parameters affecting the extraction efficiency were investigated with an orthogonal experiment design, L9 (3⁴). Under the optimized conditions, the enrichment factor of hippuric acid was 16.7‐fold. The method reproducibility was investigated in terms of intra‐ and interday precisions with relative standard deviations lower than 8.7 and 9.5%, respectively. In addition, ruthenium(III)‐immobilized metal affinity chromatography material could be used for up to 80 extractions without an apparent change in extraction recovery.     

Organic polymer monoliths as stationary phases for capillary HPLC

Modern rigid porous polymer monoliths were conceived as a new class of stationary phases in classical columns in the early 1990s and later extended to the capillary format. These monolithic materials are typically prepared using a simple molding process carried out within the confines of the capillary. Polymerization of a mixture comprising monomers, initiator, and porogenic solvent affords macroporous materials with large through-pores that enable applications in a rapid flow-through mode. Since all the mobile phase must flow through the monolith, convection considerably accelerates mass transport within the monolithic separation medium and improves the separations. As a result, monolithic columns perform well even at very high flow rates. Various mechanisms including thermally and UV initiated free radical polymerization as well as ring opening metathesis copolymerizations were demonstrated for the preparation of monolithic capillary columns. The versatility of these preparation techniques was demonstrated by their use with hydrophobic (styrene, divinylbenzene, butyl methacrylate, ethylene dimethacrylate), hydrophilic (2-hydroxyethyl methacrylate, methacrylamide, methylenebisacrylamide), ionizable (vinylsulfonic acid, 2-acrylamido-2-methyl-propanesulfonic acid), and tailor-made (norborn-2-ene, 1,4,4a,5,8,8a-hexahydro-1,4,5,8-exo,endo-dimethanonaphthalene) monomers. Variation of polymerization conditions enables control of the porous properties of the monolith over a broad range and mediates the hydrodynamic properties of the monolithic columns. The applications of polymer-based monolithic capillary columns are demonstrated for numerous separations in the microHPLC mode.