Enantioseparation of dansyl amino acids by ligand‐exchange capillary electrophoresis with zinc(II)‐L‐phenylalaninamide complex

A novel method of chiral ligand‐exchange CE was developed with L ‐amino acylamides as a chiral ligand and zinc(II) as a central ion. It has been demonstrated that these chiral complexes, such as Zn(II)‐L ‐alaninamide, Zn(II)‐L ‐prolinamide, and Zn(II)‐L ‐phenylalaninamide, are suitable for use as chiral selectors for the enantioseparation of either individual pair of or mixed dansyl amino acids. The optimal separation running buffer consisted of 5 mM ammonium acetate, 100 mM boric acid, 4 mM ZnSO₄·7 H₂O, and 8 mM L ‐amino acylamides at pH 8.2. The experiments showed that apart from the effect of the concentration of the complexes on the resolution and the migration time, the buffer pH also had a sharp influence on resolution. The employed chiral ligands exhibited different enantioselectivities and enantiomer migration orders. D ‐Amino acids migrate faster than L ‐amino acids when Zn(II)‐L ‐alaninamide and Zn(II)‐L ‐phenylalaninamide are used as chiral selectors, but it was observed that the migration order is reversed when Zn(II)‐L ‐prolinamide is used as the chiral selector. Furthermore, the amount of dansylated amino acids is found to be highly dependent on the labeling temperature.     

Facile preparation of boronic acid‐functionalized magnetic nanoparticles with a high capacity and their use in the enrichment of cis‐diol‐containing compounds from plasma

The use of bronate affinity adsorbents is a new separation method that appeared recently with great potential for specific extraction of cis‐diol‐containing compounds. In this work,a new strategy for the facile construction of boronic acid‐functionalized Fe₃O₄ magnetic nanoparticles (Fe₃O₄@FPBA MNPs) with a high capacity was described. The extraction capacity of the Fe₃O₄@FPBA MNPs was determined to be 66.0 ± 2.7 µmol/g for catechol and 80.6 ± 2.0 µmol/g for dopamine, being higher than that for the reported methods. The Fe₃O₄@FPBA MNPs were used to extract four cis‐diol drugs: caffeic acid isopropyl ester, caffic acid bornyl ester, isopropyl 3‐(3,4‐dihydroxyphenyl)‐2‐hydroxypropanoate and 3‐(3, 4‐dihydroxyphenyl)‐2‐hydroxylpropionic acid – from the spiked rabbit plasma, and the recoveries of four drugs were between 87.29 and104.37% with relative standard deviations ranging from 1.34 to 8.81%. Under the most favorable conditions, the solid‐phase extraction combined with HPLC‐UV for the analysis of four drugs in plasma could eliminate interferences from endogenous components of the biological fluids and exhibited sufficient precision and accuracy. These results showed that the prepared Fe₃O₄@FPBA MNPs were qualified for efficiently enriching and determining the trace cis‐diol substances from biological samples. Copyright © 2014 John Wiley & Sons, Ltd.     

End‐functionalization of semiconducting species with dendronized terpyridine–Ru(II)–terpyridine complexes

Semiconducting oligomers and polymers decorated with two or one dendronized tpy‐Ru(II)‐tpy metallocomplexes are presented. Initially, free terpyridine end‐functionalized semiconducting oligomers (distyrylanthracene, quinquephenylene, mono‐ and trifluorenes) were prepared while in a second approach, atom transfer radical polymerization was employed for the preparation of side‐chain oligomeric and polymeric (oxadiazole)s using a terpyridine initiator. These terpyridine‐bearing oligomers and polymers were complexated with a Percec‐type first‐generation (G1) dendronized terpyridine–Ru(III)Cl₃ monocomplex, having two dodecyloxy groups. All oligomeric and polymeric metallocomplexes were characterized via NMR spectroscopies for their structural perfection and via UV‐Vis and PL spectroscopies for their optical properties. The existence of the organic semiconducting blocks in combination with the terpyridine–Ru(II)–terpyridine groups afforded hybrid metallo‐semiconducting species presenting the optical features of both their components. Moreover, their thin‐film morphologies were investigated through atomic force microscopy, revealing, in some cases, an organization tendency in the nanometer scale. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1939–1952, 2009     

Highly selective enrichment of phosphopeptides using poly(dibenzo‐18‐crown‐6) as a solid‐phase extraction material

A poly(dibenzo‐18‐crown‐6) was used as a new solid‐phase extraction material for the selective enrichment of phosphopeptides. Isolation of phosphopeptides was achieved based on specific ionic interactions between poly(dibenzo‐18‐crown‐6) and the phosphate group of phosphopeptides. Thus, a method was developed and optimized, including loading, washing and elution steps, for the selective enrichment of phosphopeptides. To assess this potential, tryptic digest of three proteins (α‐ casein, β‐casein and ovalbumin) was applied on poly(dibenzo‐18‐crown‐6). The nonspecific products were removed by centrifugation and washing. The spectrometric analysis was performed using matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. Highly selective enrichment of both mono‐ and multiphosphorylated peptides was achieved using poly(dibenzo‐18‐crown‐6) as solid‐phase extraction material with minimum interference from nonspecific compounds. Furthermore, evaluation of the efficiency of the poly(dibenzo‐18‐crown‐6) was performed by applying the digest of egg white. Finally, quantum mechanical calculations were performed to calculate the binding energies to predict the affinity between poly(dibenzo‐18‐crown‐6) and various ligands. The newly identified solid‐phase extraction material was found to be a highly efficient tool for phosphopeptide recovery from tryptic digest of proteins.     

Facile preparation of a high‐capacity boronate‐affinity adsorbent based on low‐cost commercial supports for selective enrichment of cis‐diol‐containing biomolecules

Boronate‐affinity adsorbents have been regarded as favorable extraction adsorbents for the pretreatment of cis‐diol‐containing biomolecules owning to their specific selectivity, but most of them have low adsorption capacity and a tedious synthesis methods. In this study, a new boronate‐affinity material (PGMA@FPBA) with high adsorption capacity was synthesized via a “one‐pot” method based on a low‐cost commercial support. The PGMA@FPBA was characterized by Fourier transform infrared spectroscopy (FT‐IR), X‐ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), and nitrogen adsorption/desorption measurements. The as‐prepared adsorbent showed good selectivity, high adsorption capacity (448 μmol/g for catechol), and fast adsorption equilibration (1 min) for cis‐diol‐containing biomolecules. Subsequently, as an example for application, the obtained PGMA@FPBA was used as a dispersive solid‐phase extraction (d‐SPE) adsorbent for enrichment of quercetin in red wine. The results indicated that the facile‐prepared boronate‐affinity adsorbent has great potential application for separation and enrichment of cis‐diol‐containing biomolecules in complex samples.     

Five Coordinated Zinc(II) and Tris‐Chelate Cadmium(II) Complexes with 2,2′‐Diamino‐5,5′‐dimethyl‐4,4′‐bithiazole – Syntheses,Spectroscopic Characterization,and Crystal Structure

The new synthesized ligand (DADMBTZ = 2,2′‐diamino‐5,5′‐dimethyl‐4,4′‐bithiazole), which is mentioned in this text, is used for preparing the two new complexes [Zn(DADMBTZ)₃](ClO₄)₂. 0.8MeOH.0.2H₂O ( 1 ) and [Cd(DADMBTZ)₃](ClO₄)₂ ( 2 ). The characterization was done by IR, ¹H, ¹³C NMR spectroscopy, elemental analysis and single crystal X‐ray determination. In reaction with DADMBTZ, zinc(II) and cadmium(II) show different characterization. In 2 , to form a tris‐chelate complex with nearly C₃ symmetry for coordination polyhedron, DADMBTZ acts as a bidentate ligand. In 1 , this difference maybe relevant to small radii of Zn²⁺ which make one of the DADMBTZ ligands act as a monodentate ligand to form the five coordinated Zn²⁺ complex. In both 1 and 2 complexes the anions are symmetrically different. 1 and 2 complexes form 2‐D and 3‐D networks via N‐H···O and N‐H···N hydrogen bonds, respectively.     

Pseudohalide‐directed Assembly of Two Zinc(II) Coordination Polymers with a 3,4‐Bis(3‐pyridyl)‐5‐(4‐pyridyl)‐1,2,4‐triazole Tecton

The zinc(II) pseudohalide complexes {[Zn(L³³⁴)(SCN)₂(H₂O)](H₂O)₂}_n ( 1 ) and [Zn(L³³⁴)(dca)₂]_n ( 2 ) were synthesized and characterized using the ligand 3,4‐bis(3‐pyridyl)‐5‐(4‐pyridyl)‐1,2,4‐triazole (L³³⁴) and ZnCl₂ in presence of thiocyanate (SCN^–) and dicynamide [dca, N(CN)₂^–] respectively. Single‐crystal X‐ray structural analysis revealed that the central Zn^II atoms in both complexes have similar octahedral arrangement. Compound 1 has a 2D sheet structure bridged by bidentate L³³⁴ and double μ_N,S‐thiocyanate anions, whereas complex 2 , incorporating with two monodentate dicynamide anions, displays a two‐dimensional coordination framework bridged by tetradentate L³³⁴ ligand. Structural analysis demonstrated that the influence of pseudohalide anions plays an important role in determining the resultant structure. Both complexes were characterized by IR spectroscopy, microanalysis, and powder X‐ray diffraction techniques. In addition, the solid fluorescence and thermal stability properties of both complexes were investigated.     

Preparation of phenyl‐functionalized magnetic mesoporous silica microspheres for the fast separation and selective enrichment of phenyl‐containing peptides

Peptide enrichment before mass spectrometry analysis is essential for large‐scale peptidomic studies, but challenges still remain. Herein, magnetic mesoporous silica microspheres with phenyl group modified interior pore walls were prepared by a facile sol–gel coating strategy, and were successfully applied for selective enrichment of phenyl‐containing peptides in complex biological samples. The newly prepared nanomaterials possessed abundant silanol groups in the exterior surface and numerous phenyl groups in the interior pore walls, as well as a large surface area (592.6 m²/g), large pore volume (0.33 cm³/g), uniform mesopores (3.8 nm), strong magnetic response (29.3 emu/g), and good dispersibility in aqueous solution. As a result of the unique structural properties and size‐exclusion effect, the core–shell phenyl‐functionalized magnetic mesoporous silica microspheres exhibited excellent performance in fast separation and selective enrichment of phenyl‐containing peptides, and the adsorption capacity for bradykinin reached 22.55 mg/g. In addition, selective enrichment of phenyl‐containing peptides from complex samples that are consist of peptides, large proteins, and human serum were achieved by using the as‐prepared microspheres, followed by high‐performance liquid chromatography with ultraviolet detection and electrospray ionization quadrupole time‐of‐flight mass spectrometry analysis. These results demonstrated the as‐prepared microspheres would be a potential candidate for endogenous phenyl‐containing peptides enrichment and biomarkers discovery in peptidome analysis.     

Sequential injection spectrophotometric determination of zinc(II) in pharmaceuticals based on zinc(II)–PAN in non-ionic surfactant medium

A sequential injection analysis (SIA) spectrophotometric method for the determination of trace amounts of zinc(II) with 1-(2-pyridylazo)-2-naphthol (PAN) is described. The method is based on the measurement of absorbance of the zinc(II)–PAN chelate solubilized with a non-ionic surfactant, Triton X-100, no extraction procedure is required in the proposed method, yielding a pink colored complex at pH 9.5 with absorption maximum at 553 nm. The SIA parameters that affect the signal response have been optimized in order to get the better sensitivity and minimum reagent consumption. A linear relationship between the relative peak height and concentration was obtained in the concentration range of 0.1–1.0 μg ml⁻¹. The limit of detection (LOD, defined as 3σ) and limit of quantification (LOQ, defined as 10σ) were 0.02 and 0.06 μg ml⁻¹, respectively. The sample throughput about 40 samples/h was obtained. The repeatability were 1.32 and 1.24% (n = 10) for 0.1 and 0.5 μg ml⁻¹, respectively. The proposed method was successfully applied to the assay of zinc(II) in three samples of multivitamin tablets. The results were found to be in good agreement with those obtained by flame atomic absorption spectrophotometric method and with the claimed values by the manufactures. The t-test showed no significant difference at 95% confidence level.     

A New Sulfur‐containing Schiff‐Base Ligand and Binding to Copper(II) and Cobalt(II)

A new Schiff‐base ligand having a potentially coordinating thioether group (2‐quinoline‐N‐(2′‐methylthiophenyl)methyleneimine, qmtpm ) has been prepared. The synthesis, structure, UV‐Vis and EPR studies of one copper(II) and two cobalt(II) complexes from this ligand is reported. The X‐ray structures of the Cu^II and Co^II chlorido complexes 1 and 2 reveal the metal atoms in highly distorted square‐pyramidal environments constituted of one tridentate ligand and two anions. On the other hand, the thiocyanato Co^II compound 3 exhibits a distorted trigonal‐bipyramidal structure. These structural variations are apparently due to the different counter‐ions which leads to distinct lattice interactions. The spectroscopic data obtained by EPR and UV‐Vis investigations are in agreement with the solid‐state structures of the coordination compounds.     

Synthesis of water‐soluble allyl‐functionalized oligochitosan and its modification by thiol–ene addition in water

A novel, straightforward and versatile chemical pathway has been studied to functionalize water‐soluble chitosan oligomers. This metal‐free methodology is based on the epoxy‐amine reaction of the allyl glycidyl ether with chitosan, followed by thiol‐ene radical coupling reaction of ω‐functional mercaptans, using 4,4′‐Azobis(4‐cyanovaleric acid) as a free radical initiator. Both reactions were entirely carried out in water. In a preliminary step, chitosan depolymerization was carried out using H₂O₂ in an acetic medium under 100 W microwave irradiation, optimizing the yield of water‐soluble oligomers. Functionalization by six different thiols bearing alcohol, carboxylic acid, ester, and amino groups was then performed, leading to a range of functional oligochitosans with different grafting efficiencies. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 39–48     

Synthesis,Crystal Structures,and Properties of Copper(II), Zinc(II), and Cadmium(II) Coordination Polymers Based on 5‐Nitro‐isophthalate and 1,2‐(2‐Pyridyl)‐1,2,4‐triazole

Three coordination polymers, namely {[Cu(5‐nipa)(L²²)](H₂O)₂}_n ( 1 ), [Zn(5‐nipa)(L²²)(H₂O)]_n ( 2 ), and {[Cd₂(5‐nipa)₂(L²²)(H₂O)₃](H₂O)_3.6}_n ( 3 ), were prepared under similar synthetic method based on 1,2‐(2‐pyridyl)‐1,2,4‐triazole (L²²) and ancillary ligand 5‐nitro‐isophthalic acid (5‐H₂nipa) with Cu^II, Zn^II, and Cd^II perchlorate, respectively. All the complexes were characterized by IR spectroscopy, elemental analysis, and powder X‐ray diffraction (PXRD) patterns. Single‐crystal X‐ray diffraction indicates that complexes 1 and 2 show similar 1D chain structures, whereas complex 3 exhibits the 2D coordination network with hcb topology. The central metal atoms show distinct coordination arrangements ranging from distorted square‐pyramid for Cu^II in 1 , octahedron for Zn^II in 2 , to pentagonal‐bipyramid for Cd^II in 3 . The L²² ligand adopts the same (η³,μ₂) coordination fashion in complexes 1 – 3 , while the carboxyl groups of co‐ligand 5‐nipa^2– adopt monodentate fashion in 1 and 2 and bidentate chelating mode in 3 . These results indicate that the choice of metal ions exerts a significant influence on governing the target complexes. Furthermore, thermal stabilities of complexes 1 – 3 and photoluminescent properties of 2 and 3 were also studied in the solid state.     

Twodimensional Metal‐Organic Framework [Zn(bqdc)]n (bqdc = 2,2′‐biquinoline‐4,4′‐dicarboxylate) – Synthesis,Crystal Structure and Spectral Characterization

A new two‐dimensional metal‐organic framework [Zn(bqdc)]_n (bqdc = 2,2′‐biquinoline‐4,4′‐dicarboxylate) was obtained by the reaction of ligand 2,2′‐biquinoline‐4,4′‐dicarboxylic acid (H₂bqdc) and Zn(CH₃COO)₂·2H₂O under hydrothermal conditions. It has been characterized by elemental analysis, FT‐IR, ¹H‐NMR and single crystal X‐ray crystallography. It crystallizes in the monoclinic space group P2₁/n and exhibits a 2D zig‐zag network, assisted by face‐to‐face π‐π interactions of quinoline rings. In addition, it has a fluorescence emission in the solution state at room temperature.     

Synthesis of allyl end‐block functionalized poly(ε‐caprolactone)s and their facile post‐functionalization via thiol–ene reaction

A simple and facile strategy for the functionalization of commercial poly(ε‐caprolactone) diols (PCLs) with pendant functionalities at the polymer chain termini is described. Well‐defined allyl‐functionalized PCLs with varying numbers of allyl end‐block side‐groups were synthesized by cationic ring‐opening polymerization of allyl glycidyl ether using PCL diols as macroinitiators. Further functionalization of the allyl‐functionalized PCLs was realized via the UV‐initiated radical addition of a furan‐functionalized thiol to the pendant allyl functional groups, showing the suitability for post‐modification of the PCL materials. Changes in polymer structure as a result of varying the number of pendant functional units at the PCL chain termini were demonstrated. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 928–939     

Crystallographic report: Crystal structure of tetra(4‐methyl‐5‐imidazole‐carboxyaldehyde)zinc(II) diperchlorate

The central zinc(II) atom in the title complex is tetrahedrally coordinated by four nitrogen atoms derived from 4‐methyl‐5‐imidazolecarboxyaldehyde ligands with Zn? N in the range 2.007(3) to 2.026(4) Å. Copyright © 2003 John Wiley & Sons, Ltd.     

Solvent‐free Synthesis,Characterization and Solvent‐Vapor Interaction of Zinc(II) and Copper(II) Coordination Polymers containing Nitrogen‐donor Ligands

Coordination polymers of [Zn(INA)₂] ( 1 ) (INA = isonicotinate), [Cu₂(mal)₂(H₂O)₂(bipy)] ( 2 ) (mal = malonate, bipy = 4,4‐bipyridine), and [Zn₂(OAC)₄(bipy)₂] ( 3 ) (OAC = acetate) were prepared using mechanochemical grinding and heating methods. The materials were characterized with elemental analysis, FT‐IR spectroscopy, TGA, SEM, EI‐MS, BET, and PXRD. Comparison of PXRD patterns of the materials with patterns simulated from single‐crystal X‐ray diffraction data allowed identification of the products. Compared to conventional synthetic techniques such as solvothermal/hydrothermal solvent‐based methods, solvent‐free method was found to be simple, highly efficient, and environmentally friendly especially for the preparation of these coordination polymers on a large scale. Solvent‐vapor interaction properties of 1 , 2 , and 3 were investigated by exposure of the compounds to water and methanol at room temperature.     

Grid‐like Cobalt(II) Layered Complex with an Unprecedented Double 1,2‐Bis(1,2,4‐triazole‐1‐yl)methane Bridges

A novel two‐dimensional cobalt complex, [Co(btrm)₂(dca)]ClO₄ ( 1 , btrm = 1,2‐bis(1,2,4‐triazole‐1‐yl)methane, dca = dicyanamide), was synthesized and characterized. X‐ray diffraction analyses reveal that the title complex crystallizes in the monoclinic space group C2/m with a = 29.507(13)Å, b = 17.804(8) Å, c = 14.709(7) Å, β = 119.916(7)°, Z = 12, and R₁ = 0.0784, wR₂ = 0.2041. The cobalt atom involves a six‐coordinated CoN₆ environment, with a distorted octahedral coordination. Two btrm ligands connect the Co^II atoms with the exodentate nitrogen atoms on the 4‐position of triazole rings to form a sixteen‐membered rhombic grid. The unprecedented double btrm bridges and μ_1,5‐dca bridge connect the cobalt atoms to form a two‐dimensional grid‐like layered structure. The spectroscopic and magnetic properties have also been investigated.     

Structural and Coordinative Variability in Zinc(II), Cadmium(II), and Mercury(II) Complexes of 2‐Pyridineformamide 3‐Hexamethyleneiminylthiosemicarbazone

Sodium in dry methanol reduces 2‐cyanopyridine in the presence of 3‐hexamethyleneiminylthiosemicarbazide and produces 2‐pyridineformamide 3‐hexamethyleneiminylthiosemicarbazone, HAmhexim ( 1 ). Complexes with zinc(II ), cadmium(II ) and mercury(II ) have been prepared and characterized by spectroscopic techniques. In addition, the crystal structures of HAmhexim ( 1 ), [Zn(Amhexim)(OAc)]₂μ·μDMSO ( 2 ), [Cd(HAmhexim)Cl₂]μ·μDMSO ( 7 ), [Cd(Amhexim)₂] ( 8 ), [Cd(HAmhexim)Br₂]μ·μDMSO ( 9 ), [Cd(HAmhexim)I₂]μ·μEtOH ( 10 ), [Hg(HAmhexim)Cl₂]μ·μDMSO ( 11 ), [Hg(Amhexim)Br]₂ ( 13 ), [Hg₃(HAmhexim)(Amhexim)Br₅]μ·μH₂O ( 14 ) and [Hg(Amhexim)I]₂ ( 15 ) have been determined. Coordination of the anionic and neutral thiosemicarbazone ligand occurs through the pyridine nitrogen atom, imine nitrogen atom, and thiolato or thione sulfur atom. In [Zn(Amhexim)(OAc)]₂ one of the bridging acetato ligands has monodentate coordination and the other bridges in a bidentate manner. [Cd(Amhexim)₂] is a 6‐coordinate species while the other cadmium complexes are 5‐coordinate. In [Hg(Amhexim)Br]₂ and [Hg(Amhexim)I]₂ the thiolato sulfur atoms act as bridges between the Hg atoms to form dimeric compounds and [Hg₃(HAmhexim)(Amhexim)Br₅]μ·μH₂O is a trinuclear complex with three different centers — two metallic centers have a 5‐coordination and the another one has 4‐coordination. In addition, [Hg(HAmhexim)Cl₂]μ·μDMSO and [Hg₃(HAmhexim)(Amhexim)Br₅]μ·μH₂O shown a supramolecular one‐dimensional hydrogen‐bonded self‐assembling.     

Preparation and characterization of polyphenylene sulfide–based chelating resin–functionalized 2‐amino‐1,3,4‐thiadiazole for selective removal Hg(II) from aqueous solutions

A novel chelating resin (PPS‐ATD) containing N and S elements was prepared through the chloromethylation of polyphenylene sulfide resin and subsequent functionalization with 2‐amino‐1,3,4‐thiadiazole (ATD). The structure of PPS‐ATD was systematically characterized and analyzed by the Fourier transform infrared spectroscopy, elemental analysis, thermogravimetric analysis, scanning electron microscope, and energy dispersive spectrometer. The adsorption performance of PPS‐ATD was evaluated by batch methods at different pH, temperature, adsorption time, and initial concentration, and the results showed that the PPS‐ATD exhibited high adsorption capacity (197.79 mg·g⁻¹ at 298 K) and selectivity for Hg(II). The adsorption of PPS‐ATD for Hg(II) was well fitted by the Langmuir isotherm model, and the adsorption process was endothermic. After 5 consecutive regeneration cycles, no obvious loss in the adsorption capacity of the PPS‐ATD was found, which implied that the PPS‐ATD had great application prospects in the treatment of mercury‐containing wastewater.     

Antimicrobial equipment of poly(isoprene) applying thiol‐ene chemistry

The functionalization of anionically polymerized isoprene with cysteamine applying the thiol‐ene reaction is reported. Antimicrobial activity is implemented by quaternization of the amino functionality by either alkylation or by protonation. The resulting polymers were tested against Gram‐positive as well as Gram‐negative bacteria strains according to the Japanese Industrial Standard Z2801:2000 protocol, partly revealing excellent biocidal performance. Thermal stability up to 200°C allows extrusion processing of the functionalized poly(isoprene)s. The best performing polymer, that is, bearing butylated ammonium‐groups, was compounded with the commodity material poly(propylene). The compound bearing 5 wt % of the biocidal polymer exhibited satisfactory biocidal properties. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012