Purification of monoclonal antibodies, IgG1, from cell culture supernatant by use of metal chelate convective interaction media monolithic columns

Monoclonal antibodies (MAbs) have diverse applications in diagnostics and therapeutics. The recent advancement in hybridoma technology for large‐scale production of MAbs in bioreactors demands rapid and efficient purification methods. Conventional affinity purification systems have drawbacks of low flow rates and denaturation of antibodies owing to harsh elution conditions. Here, we attempted purification of MAbs by use of a high‐throughput metal–chelate methacrylate monolithic system. Monolithic macroporous convective interaction media–iminodiacetate (CIM‐IDA) disks immobilized with four different metal ions (Cu²⁺, Ni²⁺, Zn²⁺ and Co²⁺) were used and evaluated for purification of anti‐human serum albumin IgG1 mouse MAbs from cell culture supernatant after precipitation with 50% ammonium sulfate. Elution with 10 mM imidazole in the equilibration buffer (25 mM MMA = MOPS (Morpholino propane sulfonic acid) + MES (Morpholino ethane sulfonic acid) + Acetate + 0.5 M NaCl, pH 7.4) resulted in a purification of 25.7 ± 2.9‐fold and 32.5 ± 2.6‐fold in experiments done using Zn²⁺ and Co²⁺ metal ions, respectively. The highest recovery of 85.4 ± 1.0% was obtained with a CIM‐IDA‐Zn(II) column. SDS–PAGE, ELISA and immuno‐blot showed that the antibodies recovered were pure, with high antigen‐binding efficiency. Thus, metal chelate CIM monoliths could be a potential alternative to conventional systems for fast and efficient purification of MAbs from the complex cell culture supernatant. Copyright © 2012 John Wiley & Sons, Ltd.     

Analysis of monoclonal antibody by a novel CE‐UV/MALDI‐MS interface

mAbs are highly complex proteins that present a wide range of microheterogeneity that requires multiple analytical methods for full structure assessment and quality control. As a consequence, the characterization of mAbs on different levels is particularly product‐ and time‐consuming. CE‐MS couplings, especially to MALDI, appear really attractive methods for the characterization of biological samples. In this work, we report the last instrumental development and performance of the first totally automated off‐line CE‐UV/MALDI‐MS/MS. This interface is based on the removal of the original UV cell of the CE apparatus, modification of the spotting device geometry, and creation of an integrated delivery matrix system. The performance of the method was evaluated with separation of five intact proteins and a tryptic digest mixture of nine proteins. Intact protein application shows the acquisition of electropherograms with high resolution and high repeatability. In the peptide mapping approach, a total number of 154 unique identified peptides were characterized using MS/MS spectra corresponding to average sequence coverage of 64.1%. Comparison with NanoLC/MALDI‐MS/MS showed complementarity at the peptide level with an increase of 42% when using CE/MALDI‐MS coupling. Finally, this work represents the first analysis of intact mAb charge variants by CZE using an MS detection. Moreover, using a peptide mapping approach CE‐UV/MALDI‐MS/MS fragmentation allowed 100% sequence coverage of the light chain and 92% of the heavy chain, and the separation of four major glycosylated peptides and their structural characterization.     

Direct automatic determination of polyphenols in olive oils in the aqueous phase of a flow-injection liquid-liquid extraction system without phase separation

A method for the determination of polyphenols in olive in which the analytes are extracted into the aqueous phase by a liquid-liquid extraction system based on the use of a flow-injection configuration with iterative change of the flow direction is proposed. None of the typical units for this continuous separation technique are required by the proposed configuration. The analytes can be determined in the range over which polyphenols normally occur in these samples (100–900 μg ml^?1) with better precision (2.8–4.0% vs. 6%) and sampling frequency (28 h^?1 vs. 0.5 h^?1) and sample (< 1 g vs. 30 g) and reagent consumption than by the conventional method.     

Hydroformylation of 2,5‐norbornadiene in organic/aqueous two‐phase system and acceleration by cationic surfactants

The organic/aqueous biphasic hydroformylation of 2,5‐norbornadiene (NBD) was investigated for the first time using HRh(CO)(TPPTS)₃ (TPPTS: trisodium salt of tri(m‐sulphonylphenyl)phosphine) as the catalyst precursor. A comparison was made of homogeneous and biphasic systems. The optimum reaction parameters are discussed and the reaction mechanism is presented. In order to ensure the process attained high activity under moderate conditions, the effect of various cationic surfactants was tested in the biphasic hydroformylation of NBD. The results indicated that the hydroformylation of NBD in the biphasic system exhibited high activity and high selectivity to dialdehyde products under mild conditions. The addition of cationic surfactants markedly accelerated the reaction. A single long‐chain surfactant seemed to exert a greater impact on the hydroformylation of NBD than a double long‐chain surfactant. Moreover, the recycling of aqueous solution containing catalyst with or without surfactant was investigated. In the absence of the surfactant, the aqueous catalyst could be recycled six times without a significant decrease in activity and selectivity. Copyright © 2016 John Wiley & Sons, Ltd.     

Evaluation and application of a mixed‐mode chromatographic stationary phase in two‐dimensional liquid chromatography for the separation of traditional Chinese medicine

In this study, two mixed‐mode chromatography stationary phases (C8SAX and C8SCX) were evaluated and used to establish a two‐dimensional liquid chromatography system for the separation of traditional Chinese medicine. The chromatographic properties of the mixed‐mode columns were systematically evaluated by comparing with other three columns of C8, strong anion exchanger, and strong cation exchanger. The result showed that C8SAX and C8SCX had a mixed‐mode retention mechanism including electrostatic interaction and hydrophobic interaction. Especially, they were suitable for separating acidic and/or basic compounds and their separation selectivities could be easily adjusted by changing pH value. Then, several off‐line 2D‐LC systems based on the C8SAX in the first dimension and C8SAX, C8SCX, or C8 columns in the second dimension were developed to analyze a traditional Chinese medicine—Uncaria rhynchophylla. The two‐dimensional liquid chromatography system of C8SAX (pH 3.0) × C8SAX (pH 6.0) exhibited the most effective peak distribution. Finally, fractions of U. rhynchophylla prepared from the first dimension were successfully separated on the C8SAX column with a gradient pH. Thus, the mixed‐mode stationary phase could provide a platform to separate the traditional Chinese medicine in practical applications.     

Synthesis of a new amino acid/sulfur dioxide copolymer and its use in aqueous two‐phase polymer systems

The amine salt N,N‐diallyl‐N‐5‐carbomethoxypentylammonium chloride was copolymerized with sulfur dioxide in dimethyl sulfoxide with ammonium persulfate or 2,2′‐azobisisobutyronitrile and afforded a cationic polyelectrolyte (CPE) with a five‐membered cyclic structure on the polymeric backbone. The CPE, upon acidic hydrolysis of the pendent ester groups, gave a corresponding cationic acid salt (CAS) having the equivalent of chloride salt of 6‐N,N‐diallylammoniohexanoic acid as the monomeric unit. The CAS was converted into an anionic polyelectrolyte (APE) and a polybetaine (PB), having the monomeric unit equivalent of sodium 6‐N,N‐diallylaminohexanoate and 6‐N,N‐diallylammoniohexanoate, by treatment with 2 and 1 equiv of base, respectively. The solution properties of APE were investigated by potentiometric and viscometric techniques. The basicity constant of the amine functionality in APE was apparent and as such followed the modified Henderson–Hasselbalch equation; the protonation of the APE became more and more difficult as the degree of protonation of the whole macromolecule increased. The compositions and phase diagrams of the aqueous two‐phase systems of APE and poly(ethylene glycol) were studied. The PB was found to be insoluble in water, and this paves the way for the potential use of APE in aqueous two‐phase polymer systems for protein purification and its removal and recycling by conversion into PB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2464–2477, 2002     

Optimization of the fractional precipitation of paclitaxel from a Taxus chinensis cell culture using response surface methodology and its isolation by consecutive high‐speed countercurrent chromatography

A consecutive preparation method for the isolation and purification of paclitaxel from the Taxus Chinensis cell culture was developed in this study. The process involved alkaline Al₂O₃ chromatography, fractional precipitation, and high‐speed countercurrent chromatography. The original cell culture materials were first extracted with methanol using ultrasound‐assisted extraction, and then the extract (the content of paclitaxel is 1.5%) was separated by alkaline Al₂O₃ column chromatography. Subsequently, fractional precipitation was used to obtain paclitaxel. In particular, response surface methodology was used to optimize the factors of fractional precipitation (methanol concentration, material‐to‐solvent ratio, and precipitating time were optimized as 48.14%, 8.85 mg/mL, and 48.71 h, respectively) and the yield of fractional precipitation product was 30.64 ± 0.60 mg (the content of paclitaxel is 89.3%, 27.37 ± 0.54 mg) from a 100 mg fraction by Al₂O₃ column separation (the content of paclitaxel is 32.4%). Then, the product was used for further isolation by high‐speed countercurrent chromatography. About 1.00 g paclitaxel (200 ± 2 mg in each loading) with a purity up to 99.61% was isolated from 1.25 g of fractional precipitation product with a solvent system of n‐hexane/ethyl acetate/methanol/water (1.2:1.8:1.5:1.5, v/v/v/v) in one run of five consecutive sample loadings without exchanging a new solvent system.     

Absolute quantitation of host cell proteins in recombinant human monoclonal antibodies with an automated CZE‐ESI‐MS/MS system

We report the first use of CZE for absolute characterization of host cell proteins (HCPs) in recombinant human monoclonal antibodies. An electrokinetically pumped nanoelectrospray interface was used to couple CZE with a tandem mass spectrometer. Three isotopic‐labeled peptides (LSFDKDAMVAR, VDIVENQAMDTR, and LVSDEMVVELIEK) were synthesized by direct incorporation of an isotope‐labeled lysine or arginine. The heavy‐labeled peptides were spiked in the HCP digests at known concentrations. After CZE‐ESI‐MS/MS analysis, the peaks of native and isotopic‐labeled peptides were extracted with mass tolerance ≤ 5 ppm from the electropherograms, and the ratios of peak area between native and isotopic‐labeled peptides pairs were calculated. Calibration curves (the ratios of peak area versus spiked peptide amount) with R² values of 0.999, 0.997, and 0.999 were obtained for the three HCP peptides, and the absolute amounts of the three proteins present were determined to be at the picomole level in a 20 μg sample of digested HCPs. The target proteins were present at the 7–30 ppt level in the purified HCP samples.     

Development of a rapid and improved two‐dimensional electrophoresis method for the separation of protein lysate

Researchers frequently use two‐dimensional polyacrylamide gel electrophoresis (2D‐PAGE) prior to mass spectrometric analysis in a proteomics approach. The i2D‐PAGE method, which ‘inverts’ the dimension of protein separation of the conventional 2D‐PAGE, is presented in this publication. Protein lysate of Channa striata, a freshwater snakehead fish, was separated based on its molecular weight in the first dimension and its isoelectric point in the second dimension. The first‐dimension separation was conducted on a gel‐free separation device, and the protein mixture was fractionated into 12 fractions in chronological order of increasing molecular weight. The second‐dimension separation featured isoelectric focusing, which further separated the proteins within the same fraction according to their respective isoelectric point. Advantages of i2D‐PAGE include better visualisation of the isolated protein, easy identification on protein isoforms, shorter running time, customisability and reproducibility. Erythropoietin standard was applied to i2D‐PAGE to show its effectiveness for separating protein isoforms. Various staining methods such as Coomassie blue staining and silver staining are also applicable to i2D‐PAGE. Overall, the i2D‐PAGE separation method effectively separates protein lysate and is suitable for application in proteomics research.     

Preparation of novel alkaline pH‐responsive copolymers for the formation of recyclable aqueous two‐phase systems and their application in the extraction of lincomycin

Aqueous two‐phase systems have potential industrial application in bioseparation and biocatalysis engineering; however, their practical application is limited primarily because the copolymers involved in the formation of aqueous two‐phase systems cannot be recovered. In this study, two novel alkaline pH‐responsive copolymers were synthesized and examined for the extraction of lincomycin. The two copolymers could form a novel alkaline aqueous two‐phase systems when their concentrations were both 6% w/w and the pH was 8.4(±0.1)–8.7(±0.1). One copolymer was synthesized using acrylic acid, 2‐(dimethylamino)ethyl methacrylate, and butyl methacrylate as monomers. Moreover, 98.8% of the copolymer could be recovered by adjusting the solution pH to its isoelectric point (pH 6.29). The other copolymer was synthesized using the monomers methacrylic acid, 2‐(dimethylamino)ethyl methacrylate, and methyl methacrylate. In this case, 96.7% of the copolymer could be recovered by adjusting the solution pH to 7.19. The optimal partition coefficient of lincomycin was 0.17 at 30°C in the presence of 10 mM KBr and 5.5 at 40°C in the presence of 80 mM Ti(SO₄)₂ using the novel alkaline aqueous two‐phase systems.     

Design and development of a two‐dimensional system based on hydrophilic and reversed‐phase liquid chromatography with on‐line sample treatment for the simultaneous separation of excreted xenobiotics and endogenous metabolites in urine

In the present work we describe a two‐dimensional liquid chromatographic system (2D‐LC) with detection by mass spectrometry (MS) for the simultaneous separation of endogenous metabolites of clinical interest and excreted xenobiotics deriving from exposure to toxic compounds. The 2D‐LC system involves two orthogonal chromatographic modes, hydrophilic interaction liquid chromatography (HILIC) to separate polar endogenous metabolites and reversed‐phase (RP) chromatography to separate excreted xenobiotics of low and intermediate polarity. Additionally, the present proposal has the novelty of incorporating an on‐line sample treatment based on the use of restricted access materials (RAMs), which permits the direct injection of urine samples into the system. The work is focused on the instrumental coupling, studying all possible options and attempting to circumvent the problems of solvent incompatibility between the RAM device and the two chromatographic columns, HILIC and RP. The instrumental configuration developed, RAM‐HILIC‐RPLC‐MS/MS, allows the simultaneous assessment of urinary metabolites of clinical interest and excreted compounds derived from exposure to toxic agents with minimal sample manipulation. Thus, it may be of interest in areas such as occupational and environmental toxicology in order to explore the possible relationship between the two types of compounds. Copyright © 2015 John Wiley & Sons, Ltd.     

Cyclodextrin‐functionalized reduced graphene oxide as a fiber coating material for the solid‐phase microextraction of some volatile aromatic compounds

A novel solid phase microextraction fiber was prepared for the first time by using a sol–gel technique with hydroxypropyl‐β‐cyclodextrin‐functionalized reduced graphene oxide as the fiber coating material. The results verified that the β‐cyclodextrin was successfully grafted onto the surface of reduced graphene oxide and the coating possessed a uniform folded and wrinkled structure. The performance of the solid phase microextraction fiber was evaluated by using it to extract nine volatile aromatic compounds from water samples before determination with gas chromatography and flame ionization detection. Some important experimental parameters that could affect the extraction efficiency such as the extraction time, extraction temperature, desorption temperature, desorption time, the volume of water sample solution, stirring rate, as well as ionic strength were optimized. The new method was validated to be effective for the trace analysis of some volatile aromatic compounds, with the limits of detection ranging from 2.0 to 8.0 ng/L. Single fiber repeatability and fiber‐to‐fiber reproducibility were in the range of 2.5–9.4 and 5.4–12.9%, respectively. The developed method was successfully applied to the analysis of three different water samples, and the recoveries of the method were in the range from 77.9 to 113.6% at spiking levels of 10, 100, and 1000 ng/L, respectively.     

Evaluation of new silica‐based humic acid stationary phase for the separation of tocopherols in cold‐pressed oils by normal‐phase high‐performance liquid chromatography

A new humic acid stationary phase was prepared by immobilizing humic acid onto aminopropyl silica via an amide linkage formation and used, for the first time, for the separation and quantification of the tocopherol compounds in cold‐pressed oil samples under normal‐phase high‐performance liquid chromatography conditions. Parameters affecting the chromatographic separation such as mobile phase composition and flow rate were optimized. By evaluating the calculations of capacity factor, asymmetry factor, resolution, selectivity factor, and theoretical plate number, the best separation was obtained with isocratic elution of n‐hexane and isopropyl alcohol (99:1% v/v) at a flow rate of 1.0 mL/min. The effluent was monitored by a fluorescence detector set at excitation and emission wavelengths 295 and 330 nm, respectively. All compounds were separated in 20 min. The method was validated according to international guidelines and found to be linear in a wide concentration range, also the mean recovery of the compounds ranged from 97.9 to 99.2%, with a CV less than 2.7% in all cases. The results showed that the developed stationary phase is suitable for the separation and quantification of the tocopherol compounds in real oil samples.     

Polyvinylimidazole/sol–gel composite as a novel solid‐phase microextraction coating for the determination of halogenated benzenes from aqueous solutions

A polyvinylimidazole/sol–gel composite is proposed as a novel solid‐phase microextraction fiber to extract five halobenzenes from the headspace of aqueous solutions in combination with gas chromatography with mass spectrometry. The prepared fiber was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. The obtained results showed that porous polyvinylimidazole/sol–gel composite was chemically deposited on fused silica fiber. The effect of important extraction parameters including extraction temperature, extraction time, and salt content were investigated. The optimum conditions were as follows: extraction temperature 25°C, extraction time 20 min, and salt concentration 30 w/v%. Detection limits and relative standard deviations of the developed method for halogenated benzenes were below 0.1 pg/mL and 15%, respectively. Repeatability of the proposed method, explained by relative standard deviation, varied between 5.48 and 9.15% (n = 5). The limits of detection (S/N = 3) ranged between 0.01 and 0.10 ng/L using gas chromatography with mass spectrometry with selected ion monitoring mode. For real sample analysis, three types of water samples with different matrices (ground, surface, and tap water) were studied. The optimized procedure was applied to extraction and method validation of halogenated benzenes in spiked water samples.     

Preparative isolation of neomangiferin and mangiferin from Rhizoma anemarrhenae by high‐speed countercurrent chromatography using ionic liquids as a two‐phase solvent system modifier

A preparative high‐speed countercurrent chromatography method for isolation and purification of neomangiferin and mangiferin from Rhizoma anemarrhenae was successfully established by using ionic liquids as the modifier of the two‐phase solvent system. Neomangiferin and mangiferin were purified from the crude extract of R. anemarrhenae by using ethyl acetate‐water‐[C₄mim][PF₆] (5:5:0.2 v/v) as two‐phase solvent system. In total, 22.5 mg of neomangiferin and 70.6 mg of mangiferin were obtained from 150 mg of the crude extract. The purities of neomangiferin and mangiferin were 97.2 and 98.1%, respectively, as determined by HPLC. The chemical structures of the isolated compounds were identified by ¹H‐NMR and ¹³C‐NMR.     

Synthesis and evaluation of a maltose‐bonded silica gel stationary phase for hydrophilic interaction chromatography and its application in Ginkgo Biloba extract separation in two‐dimensional systems

Maltose covalently bonded to silica was prepared by using carbonyl diimidazole as a cross‐linker and employed as a stationary phase for hydrophilic interaction liquid chromatography. The column efficiency and the effect of water content, buffer concentration, and pH value influenced on retention were investigated. The separation or enrichment selectivity was also studied with nucleosides, saccharides, amino acids, peptides, and glycopeptides. The results indicated that the stationary phase processed good separation efficiency and separation selectivity in hydrophilic interaction liquid chromatography mode. Moreover, a two‐dimensional hydrophilic interaction liquid chromatography× reversed‐phase liquid chromatography method with high orthogonality was developed to analyze the Ginkgo Biloba extract fractions. The development of this two‐dimensional chromatographic system would be an effective tool for the separation of complex samples of different polarities and contents.     

Ionic liquid and aqueous two‐phase extraction based on salting‐out coupled with high‐performance liquid chromatography for the determination of seven rare ginsenosides in Xue‐Sai‐Tong injection

A method of ionic liquid salt aqueous two‐phase extraction coupled with high‐performance liquid chromatography has been developed for the analysis of seven rare ginsenosides including Rg₆, F₄, 20(S)‐Rg₃, 20(R)‐Rg₃, Rk₃, Rk₁, and Rg₅ in Xue‐Sai‐Tong injection. The injection was mixed with ionic liquid 1‐butyl‐3‐methylimidazolium bromide aqueous solution, and a mixture was obtained. With the addition of sodium dodecyl sulfate and dipotassium phosphate into the mixture, the aqueous two‐phase mixture was formed after ultrasonic treatment and centrifuged. Rare ginsenosides were extracted into the upper phase. To obtain a high extraction factors, various influences were considered systematically, such as the volume of ionic liquid, the category and amount of salts, the amount of sodium dodecyl sulfate, the pH value of system, and the time of ultrasonic treatment. Under the optimal condition, rare ginsenosides in Xue‐Sai‐Tong injection were enriched and detected, the recoveries of seven rare ginsenosides ranged from 90.05 to 112.55%, while relative standard deviations were lower than 2.50%. The developed method was reliable, rapid and sensitive for the determination of seven rare ginsenosides in the injections.     

Preparative isolation of flavonoid compounds from Oroxylum indicum by high‐speed counter‐current chromatography by using ionic liquids as the modifier of two‐phase solvent system

A preparative high‐speed counter‐current chromatography method for isolation and purification of flavonoid compounds from Oroxylum indicum was successfully established by using ionic liquids as the modifier of the two‐phase solvent system. Two flavonoid compounds including baicalein‐7‐O‐diglucoside and baicalein‐7‐O‐glucoside were purified from the crude extract of O. indicum by using ethyl acetate–water–[C₄mim][PF₆] (5:5:0.2, v/v) as two‐phase solvent system. 36.4 mg of baicalein‐7‐O‐diglucoside and 60.5 mg of baicalein‐7‐O‐glucoside were obtained from 120 mg of the crude extract. Their purities were 98.7 and 99.1%, respectively, as determined by HPLC area normalization method. The chemical structures of the isolated compounds were identified by ¹H‐NMR and ¹³C‐NMR.     

Liquid phase microextraction‐ion exchange‐high performance thin layer chromatography for the preconcentration,separation, and determination of plasticizers in aqueous samples

Liquid phase microextraction combined with ion‐exchange‐high performance thin layer chromatography has been developed for analysis of four plasticizers in aqueous samples. After their preconcentration by liquid phase microextraction, fast separation on thin layers of inorganic ion‐exchanger stannic silicate has been developed using a mixture of toluene + ethyl acetate (10:1, v/v) as mobile phase. Consequently, densitometric quantitative determination of the plasticizers has been made at λ = 280 nm in reflection–absorption mode by Camag TLC scanner‐3. The effects of type and volume of extraction solvent, stirring rate, extraction time, and ionic strength in the microextraction method have been also evaluated and optimized. The results show that the proposed method provides enhanced accuracy, linear range, LOD, and LOQ, and is very effective for analyzing the target compounds in water samples. Under the optimized conditions, preconcentration factor of 149–279 and extraction efficiency of 31–59% have been obtained. Repeatability (5.67–7.26%) and intermediate precision (6.21–8.17%) were in acceptable range. The relative recovery obtained for each analyte in different water samples was higher than 82.3% at three fortification levels with RSD <7.9%.     

Three‐phase solvent systems for the comprehensive separation of a wide variety of compounds from Dicranostigma leptopodum by high‐speed counter‐current chromatography

A three‐phase solvent system was efficiently applied for high‐speed counter‐current chromatography to separate secondary metabolites with a wide range of hydrophobicity in Dicranostigma leptopodum. The three‐phase solvent system of n‐hexane/methyl tert‐butyl ether/acetonitrile/0.5% triethylamine (2:2:3:2, v/v/v/v) was selected for high‐speed counter‐current chromatography separation. The separation was initiated by filling the column with a mixture of intermediate phase and lower phase as a stationary phase followed by elution with upper phase to separate the hydrophobic compounds. Then the mobile phase was switched to the intermediate phase to elute the moderately hydrophobic compounds, and finally the polar compounds still retained in the column were fractionated by eluting the column with the lower phase. In this research, 12 peaks were eluted out in one‐step operation within 110 min, among them, eight compounds with acceptable purity were obtained and identified. The purities of β‐sitosterol, protopine, allocryptopine, isocorydione, isocorydine, coptisine, berberrubine, and berberine were 94.7, 96.5, 97.9, 86.6, 98.9, 97.6, 95.7, and 92.8%, respectively.