Quantification of triacylglycerol regioisomers by ultra‐high‐performance liquid chromatography and ammonia negative ion atmospheric pressure chemical ionization tandem mass spectrometry

The regioisomer composition of triacylglycerols (TAGs) in various vegetable oils was determined with a new liquid chromatography/tandem mass spectrometry (LC/MS/MS method). A direct inlet ammonia negative ion chemical ionization (NICI) MS/MS method was improved by adapting it to LC negative ion (NI) atmospheric pressure chemical ionization (APCI) MS/MS system using ammonia as nebulizer gas. The method is based on the preferential formation of [M–H–RCOOH–100]^? ions during collision‐induced dissociation by loss of sn‐1/3 fatty acids from [M–H]^? ions. Calibration curves were created from nine reference TAGs: Ala/L/L, Gla/L/L, L/L/O, L/O/O, P/O/O, P/P/O, Po/Po/V, Po/Po/O, and C/O/O. The calibration curves were used to quantify the regioisomer compositions of selected TAGs in rapeseed oil, sunflower seed oil, palm oil, black currant seed oil, and sea buckthorn pulp oil. The method discriminates the different regioisomers and the results obtained by this method were in good agreement with previous results. This proves that this new method can be used for the determination of regiospecific distribution of fatty acids in TAGs. Copyright © 2009 John Wiley & Sons, Ltd.     

A Highly Efficient Sandwich‐Like Symmetrical Dual‐Phase Oxygen‐Transporting Membrane Reactor for Hydrogen Production by Water Splitting

Water splitting coupled with partial oxidation of methane (POM) using an oxygen‐transporting membrane (OTM) would be a potentially ideal way to produce high‐purity hydrogen as well as syngas. Over the past decades, substantial efforts have been devoted to the development of supported membranes with appropriate configurations to achieve considerable performance improvements. Herein, we describe the design of a novel symmetrical membrane reactor with a sandwich‐like structure, whereby a largescale production (>10 mL min^?1 cm^?2) of hydrogen and syngas can be obtained simultaneously on opposite sides of the OTM. Furthermore, this special membrane reactor could regenerate the coke‐deactivated catalyst in situ by water steam in a single unit. These results represent an important first step in the development of membrane separation technologies for the integration of multiple chemical processes.     

Molecular profiling of naphthenic acids in technical mixtures and oil sands process‐affected water using polar reversed‐phase liquid chromatography–mass spectrometry

In this work, a reversed‐phase ultra‐HPLC (UHPLC) ultrahigh resolution MS (UHRMS) method was evaluated for the comprehensive profiling of NAs containing two O atoms in each molecule (O2NAs; general formula C_nH_{2n + z}O₂, where n is the number of carbon atoms and z represents hydrogen deficiency). Using a polar cyanopropyl‐bonded phase column and negative‐ion electrospray ionization mass spectrometric detection at 120,000 FWHM (m/z 400), 187 and 226 O2NA species were found in two naphthenic acid technical mixtures, and 424 and 198 species with molecular formulas corresponding to O2NAs were found in two oil sands process‐affected water samples (one from a surface mining operation and the other from a steam‐assisted gravity drainage operation), respectively. To our knowledge, these are the highest numbers of molecular compositions of O2NAs that have been profiled thus far in environmental samples. Assignments were based on accurate mass measurements (≤3 ppm) combined with rational molecular formula generation, correlation of chromatographic behavior of O2NA homologues with their elemental compositions, and confirmation with carboxyl group‐specific chemical derivatization using 3‐nitrophenylhydrazine. Application of this UHPLC–UHRMS method to the quantitation of O2NAs in the surface mining operation‐derived water sample showed excellent linearity (R² = 0.9999) with external calibration, a linear range of 256‐fold in concentration, and quantitation accuracies of 64.9 and 69.4% at two “standard substance” spiking levels.     

Broadening the Scope for Fluoride‐Free Synthesis of Siliceous Zeolites

Siliceous zeolites are ideally suited for emerging applications in gas separations, sensors, and the next generation of low‐k dielectric materials, but the use of fluoride in the synthesis significantly hinders their commercialization. Herein, we show that the dry gel conversion (DGC) technique can overcome this problem. Fluoride‐free synthesis of two siliceous zeolites—AMH‐4 (CHA‐type) and AMH‐5 (STT‐type), has been achieved for the first time using the method. Siliceous *BEA‐, MFI‐, and *MRE‐type zeolites have also been synthesized to obtain insights into the crystallization process. Charge‐balancing interactions between the inorganic cation, organic structure‐directing agent (OSDA), and Si?O^? defects are found to be an essential aspect. We quantify this factor in terms of the “OSDA charge/silica ratio” of the as‐made zeolites and demonstrate that the DGC technique is broadly applicable and opens up new avenues for fluoride‐free siliceous zeolite synthesis.     

On the calibration of continuous,high‐precision δ18O and δ2H measurements using an off‐axis integrated cavity output spectrometer

The ¹⁸O and ²H of water vapor serve as powerful tracers of hydrological processes. The typical method for determining water vapor δ¹⁸O and δ²H involves cryogenic trapping and isotope ratio mass spectrometry. Even with recent technical advances, these methods cannot resolve vapor composition at high temporal resolutions. In recent years, a few groups have developed continuous laser absorption spectroscopy (LAS) approaches for measuring δ¹⁸O and δ²H which achieve accuracy levels similar to those of lab‐based mass spectrometry methods. Unfortunately, most LAS systems need cryogenic cooling and constant calibration to a reference gas, and have substantial power requirements, making them unsuitable for long‐term field deployment at remote field sites. A new method called Off‐Axis Integrated Cavity Output Spectroscopy (OA‐ICOS) has been developed which requires extremely low‐energy consumption and neither reference gas nor cryogenic cooling. In this report, we develop a relatively simple pumping system coupled to a dew point generator to calibrate an ICOS‐based instrument (Los Gatos Research Water Vapor Isotope Analyzer (WVIA) DLT‐100) under various pressures using liquid water with known isotopic signatures. Results show that the WVIA can be successfully calibrated using this customized system for different pressure settings, which ensure that this instrument can be combined with other gas‐sampling systems. The precisions of this instrument and the associated calibration method can reach ～0.08‰ for δ¹⁸O and ～0.4‰ for δ²H. Compared with conventional mass spectrometry and other LAS‐based methods, the OA‐ICOS technique provides a promising alternative tool for continuous water vapor isotopic measurements in field deployments. Copyright © 2009 John Wiley & Sons, Ltd.     

Determination of Oxygenates in Gasoline by GC×GC

Comprehensive two‐dimensional gas chromatography (GC×GC) has been applied to the quantitation of oxygenates in reformulated gasoline. Target oxygenates were C₁–C₄ alcohols, tert‐pentanol, methyl tert‐butyl ether (MTBE), diisopropyl ether (DIPE), ethyl tert‐butyl ether (ETBE), and tert‐amyl methyl ether (TAME). These were separated from the gasoline matrix using a volatility‐based selectivity in the first chromatographic dimension, followed by a mixed‐phase polarity/shape selectivity in the second dimension. The high resolving power of this stationary phase combination completely separated all oxygenates except DIPE, ETBE, and TAME, which exhibited coelution with other nonpolar gasoline components. Oxygenates quantitation was achieved with the use of an internal standard, an FID detector, and calibration curves. Quantitation results are in good agreement with ASTM and EPA standard methods. When coupled with our previous method for BTEX and aromatics, a single GC×GC method can now quantitate MTBE, alcohols, BTEX, and aromatics in a one‐hour analysis.     

Trace Analysis of Methyl Tert‐butyl Ether in Water Samples Using New Ultrasound‐assisted Dispersive Liquid‐liquid Microextraction and Gas Chromatography‐flame Ionization Detection

In this study, simple and efficient ultrasound‐assisted dispersive liquid‐liquid microextraction combined with gas chromatography (GC) was developed for the preconcentration and determination of methyl‐tert‐butyl ether (MTBE) in water samples. One hundred microliters of benzyl alcohol was injected slowly into 10 mL home‐designed centrifuge glass vial containing an aqueous sample with 30% (w/v) of NaCl that was located inside the ultrasonic water bath. The formed emulsion was centrifuged and 2 μL of separated benzyl alcohol was injected into a gas chromatographic system equipped with a flame ionization detector (GC‐FID) for analysis. Several factors influencing the extraction efficiency such as the nature and volume of organic solvent, extraction temperature, ionic strength and centrifugation times were investigated and optimized. Using optimum extraction conditions a detection limit of 0.05 μg L^‐1 and a good linearity (r² = 0.998) in a calibration range of 0.1‐500 μg L^‐1 were achieved. This proposed method was successfully applied to the analysis of MTBE in tap, well and a ground water sam ple contaminated by leaking gasoline from an underground storage tank (LUST) in a gasoline service station.     

Resorcinol–formaldehyde xerogel as a micro‐solid‐phase extraction sorbent for the determination of herbicides in aquatic environmental samples

In this study, organic aerogels were synthesized by the sol–gel polycondensation of mixed cresol with formaldehyde in a slightly basic aqueous solution. Carbon aerogels and xerogels are generated by pyrolysis of organic aerogels. The novel sol–gel‐based micro‐solid‐phase extraction sorbent, resorcinol–formaldehyde xerogel, was employed for preconcentration of some selected herbicides. Three herbicides of the aryloxyphenoxypropionate group, clodinafop‐propargyl, haloxyfop‐etotyl, and fenoxaprop‐P‐ethyl, were extracted from aqueous samples by micro‐solid‐phase extraction and subsequently determined by gas chromatography with mass spectrometry. The effect of different parameters influencing the extraction efficiency of these herbicides including sample flow rate, sample volume, and extraction time were investigated and optimized. Under optimum conditions, linear calibration curves in the range of 0.10–500 ng/L with R² > 0.99 were obtained. The relative standard deviation at 50 μg/L concentration level was lower than 10% (n = 5) and detection limits were between 0.05 and 0.20 μg/L. The proposed method was successfully applied to the sampling and extraction of herbicides from Zayanderood and paddy water samples.     

Mechanism study of the conversion of esters to high‐octane‐number aromatics over HZSM‐5

A study of the mechanism of the catalytic transformation of mixed ethyl acetate (EA) + methyl acetate (MA) (50:50 v/v) to hydrocarbons over HZSM‐5 (Si/Al ratio of 9) catalyst was conducted. The reaction was carried out in a continuous fixed‐bed reactor under atmospheric pressure and in the temperature range 250–390°C and with weight hourly space velocity of 3.2 and 4.6 h^?1. The distribution of products including monoaromatics, fused ring aromatics and oxygenates was determined using GC‐MS. The product distribution was controlled by temperature. The oxygenate components (kinetically controlled products) were transformed into aromatics (thermodynamically controlled products) with an increase in temperature. The effluents were benzene‐free or with low content of benzene and toluene. Two intermediates were proposed for this conversion to hydrocarbons over HZSM‐5: cyclobutane‐1,3‐dione and/or acetic acid (AA) as ketene source. Furthermore, AA and mesityl oxide (MO) were selected as potential intermediates in the transformation of mixed EA + MA into hydrocarbons over HZSM‐5. It is suggested that ketene dimerization, the phenolic pool and the condensation reaction between ketene and MO are the probable mechanism routes for AA conversion. Aldol condensation, Michael addition, cracking, isomerization and ketene formation are the presumable pathways for MO conversion over HZSM‐5.     

Membrane permeation continuous‐flow isotope ratio mass spectrometry for on‐line carbon isotope ratio determination

Gaseous membrane permeation (MP) technologies have been combined with continuous‐flow isotope ratio mass spectrometry for on‐line δ¹³C measurements. The experimental setup of membrane permeation‐gas chromatography/combustion/isotope ratio mass spectrometry (MP‐GC/C/IRMS) quantitatively traps gas streams in membrane permeation experiments under steady‐state conditions and performs on‐line gas transfer into a GC/C/IRMS system. A commercial polydimethylsiloxane (PDMS) membrane sheet was used for the experiments. Laboratory tests using CO₂ demonstrate that the whole process does not fractionate the C isotopes of CO₂. Moreover, the δ¹³C values of CO₂ permeated on‐line give the same isotopic results as off‐line static dual‐inlet IRMS δ¹³C measurements. Formaldehyde generated from aqueous formaldehyde solutions has also been used as the feed gas for permeation experiments and on‐line δ¹³C determination. The feed‐formaldehyde δ¹³C value was pre‐determined by sampling the headspace of the thermostated aqueous formaldehyde solution. Comparison of the results obtained by headspace with those from direct aqueous formaldehyde injection confirms that the headspace sampling does not generate isotopic fractionation, but the permeated formaldehyde analyzed on‐line yields a ¹³C enrichment relative to the feed δ¹³C value, the isotopic fractionation being 1.0026 ± 0.0003. The δ¹³C values have been normalized using an adapted two‐point isotopic calibration for δ¹³C values ranging from ?42 to ?10‰. The MP‐GC/C/IRMS system allows the δ¹³C determination of formaldehyde without chemical derivatization or additional analytical imprecision. Copyright © 2009 John Wiley & Sons, Ltd.     

Dispersion polymerization using hydroxy‐functional macroazoinitiators as an inistab

Hydroxy‐functional macroazoinitiators with central azo unit have been synthesized by atom transfer radical polymerization of 2‐hydroxyethyl methacrylate or 2‐hydroxypropyl methacrylate in methanol. The mean degrees of polymerization of the polymer chains beside the azo group were fixed at 30 and 60. Proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatography were used to characterize the macroazoinitiators in terms of their chemical structure, molecular weight, and polydispersity, respectively. Dispersion polymerizations of styrene using the hydroxy‐functional macroazoinitiators as an inistab (initiator + colloidal stabilizer) in 2‐propanol or 2‐propanol/water media resulted in submicrometer‐sized polystyrene latex particles with hydroxy‐functional polymer hair. Electron microscopies, Fourier transform infrared spectrometer, thin layer chromatography, and ¹H NMR were used to characterize the particles in terms of their morphologies, particle sizes, and their distributions and chemical compositions. The synthesized particles behaved as an effective particulate emulsifier for the stabilization of oil‐in‐water emulsions. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Magnetic micro‐solid‐phase extraction based on magnetite‐MCM‐41 with gas chromatography–mass spectrometry for the determination of antidepressant drugs in biological fluids

A new facile magnetic micro‐solid‐phase extraction coupled to gas chromatography and mass spectrometry detection was developed for the extraction and determination of selected antidepressant drugs in biological fluids using magnetite‐MCM‐41 as adsorbent. The synthesized sorbent was characterized by several spectroscopic techniques. The maximum extraction efficiency for extraction of 500 μg/L antidepressant drugs from aqueous solution was obtained with 15 mg of magnetite‐MCM‐41 at pH 12. The analyte was desorbed using 100 μL of acetonitrile prior to gas chromatography determination. This method was rapid in which the adsorption procedure was completed in 60 s. Under the optimized conditions using 15 mL of antidepressant drugs sample, the calibration curve showed good linearity in the range of 0.05–500 μg/L (r ² = 0.996–0.999). Good limits of detection (0.008–0.010 μg/L) were obtained for the analytes with good relative standard deviations of <8.0% (n  = 5) for the determination of 0.1, 5.0, and 500.0 μg/L of antidepressant drugs. This method was successfully applied to the determination of amitriptyline and chlorpromazine in plasma and urine samples. The recoveries of spiked plasma and urine samples were in the range of 86.1–115.4%. Results indicate that magnetite micro‐solid‐phase extraction with gas chromatography and mass spectrometry is a convenient, fast, and economical method for the extraction and determination of amitriptyline and chlorpromazine in biological samples.     

Determination of Trace Methyl Tert‐Butyl Ether in Water Samples Using Dispersive Liquid‐Liquid Microextraction Coupled with GC‐FID

A rapid and sensitive analytical method has been developed for trace analysis of methyl tert‐butyl ether (MTBE) in water samples using dispersive liquid‐liquid microextraction and gas chromatography with flame ionization detection. Factors relevant to the microextraction efficiency, such as the kind of extraction solvent, the disperser solvent and their volumes, the effect of salt, sample solution temperature and the extraction time were investigated and optimized. Under the optimal conditions the linear dynamic range of MTBE was from 0.2 to 25.0 μg L^?1 with a correlation coefficient of 0.9981 and a detection limit of 0.1 μg L^?1. The relative standard deviation (RSD%) was less than 5.1% (n = 3) and the recovery values were in the range of 97.8 ± 0.9%. Finally, the proposed method was successfully applied for the analysis of MTBE in aqueous samples.     

Development of a method for the monitoring of odor‐causing compounds in atmospheres surrounding wastewater treatment plants

This study describes the development of an analytical method based on active collection in a multisorbent Tenax TA/Carbograph 1TD tube, followed by thermal desorption and GC‐MS for the determination of 16 volatile organic compounds in air samples. The analyzed compounds include ozone precursors and odor‐causing compounds belonging to different chemical families (sulfur‐ and nitrogen‐containing compounds, aldehydes, and terpenes). Two types of sorbents were tested and desorption conditions (temperature, time, and sampling, and desorption flow) were evaluated. External calibration was carried out using the multisorbent bed. Method detection limits in the range 0.2–2.0 μg m^?3 for 1 L samples were obtained. The method was applied for determining the target compounds in air samples from two different wastewater treatment plants. Most compounds were detected and toluene, limonene, and nonanal were found in particularly high concentrations with maximum values of 438, 233, and 382 μg m^?3, respectively.     

In Situ Synthesis of Porous Carbons by Using Room‐Temperature,Atmospheric‐Pressure Dielectric Barrier Discharge Plasma as High‐Performance Adsorbents for Solid‐Phase Microextraction

A one‐step, template‐free method is described to synthesize porous carbons (PCs) in situ on a metal surface by using a room‐temperature, atmospheric‐pressure dielectric barrier discharge (DBD) plasma. This method not only features high efficiency, environmentally friendliness, and low cost and simple equipment, but also can conveniently realize large‐area synthesis of PCs by only changing the design of the DBD reactor. The synthesized PCs have a regulated nestlike morphology, and thus, provide a high specific surface area and high pore volume, which result in excellent adsorption properties. Its applicability was demonstrated by using a PC‐coated stainless‐steel fiber as a solid‐phase microextraction (SPME) fiber to preconcentrate polycyclic aromatic hydrocarbons (PAHs) prior to analysis by gas chromatography with flame ionization detection (GC‐FID). The results showed that the fiber exhibited excellent enrichment factors (4.1×10⁴ to 3.1×10⁵) toward all tested PAHs. Thus, the PC‐based SPME‐GC‐FID provides low limits of detection (2 to 20 ng L ^?1), good precision (<7.8 %), and good recoveries (80–115 %) for ultra‐sensitive determination of PAHs in real water samples. In addition, the PC‐coated fiber could be stable enough for more than 500 replicate extraction cycles.     

Analysis of Cembranoids in Flue‐cured Tobacco by Accelerated Solvent Extraction and Gas Chromatography‐Mass Spectrometry‐Selected Ion Monitoring

An efficient and sensitive analytical method based on accelerated solvent extraction (ASE) and gas chromatography‐mass spectrometry‐selected ion monitoring (GC‐MS‐SIM) was developed and validated for analysis of cembranoids in flue‐cured tobacco leaves. Extraction efficiency of different pretreatment methods including liquid‐solid extraction (LSE), ultrasound‐assisted extraction (UAE), Soxlet extraction and accelerated solvent extraction (ASE) was compared and ASE was chosen as the optimal extraction method. During ASE procedure, effect of four parameters on extraction efficiency was considered and the experimental conditions were selected as follows: extraction solvent: dichloromethane; oven temperature: 50 °C; static time: 5 min and number of cycles: 2. Working standards of cembranoids were isolated by silica gel column chromatography and the identification was performed by mass spectrometry. Performance characteristics such as linearity, limit of detection (LOD), limit of quantitation (LOQ), precision and recovery were studied. The LOD and LOQ values were ranging from 5.0 × 10^?3 to 6.9 × 10^?3 μg/mL and 1.7 × 10^?2 to 2.3 × 10^?2 μg/mL for all analytes. At three different spiked levels, recoveries for CBT‐ol, α‐CBT‐diol and β‐CBT‐diol were 94.6%‐105.1%, 93.0%‐97.2% and 88.7%‐107.5% while the relative standard deviations (RSDs) were in the ranges of 3.9%‐6.2%, 1.8%‐8.7% and 1.7%‐6.0%, respectively. The proposed analytical methodology was successfully applied in the analysis of cembranoids in tobacco samples.     

One‐Step Reforming of CO2 and CH4 into High‐Value Liquid Chemicals and Fuels at Room Temperature by Plasma‐Driven Catalysis

The conversion of CO₂ with CH₄ into liquid fuels and chemicals in a single‐step catalytic process that bypasses the production of syngas remains a challenge. In this study, liquid fuels and chemicals (e.g., acetic acid, methanol, ethanol, and formaldehyde) were synthesized in a one‐step process from CO₂ and CH₄ at room temperature (30 °C) and atmospheric pressure for the first time by using a novel plasma reactor with a water electrode. The total selectivity to oxygenates was approximately 50–60 %, with acetic acid being the major component at 40.2 % selectivity, the highest value reported for acetic acid thus far. Interestingly, the direct plasma synthesis of acetic acid from CH₄ and CO₂ is an ideal reaction with 100 % atom economy, but it is almost impossible by thermal catalysis owing to the significant thermodynamic barrier. The combination of plasma and catalyst in this process shows great potential for manipulating the distribution of liquid chemical products in a given process.     

1H‐, 13C‐, and 15N‐NMR chemical shifts for selected glucosides and ribosides of aromatic cytokinins

The ¹H and ¹³C NMR resonances of 16 purine glucosides were assigned by a combination of one‐ and two‐dimensional NMR experiments, including gs‐COSY, gs‐HSQC, and gs‐HMBC, in order to characterize the effect of substituent and the position of glucose unit on the NMR chemical shifts. In addition, ¹⁵N NMR chemical shifts for selected derivatives were investigated by using ¹H? ¹⁵N chemical shift correlation techniques. To map the influence of sugar moiety on the directly bonded nitrogen atom, selected N⁹‐glucosides and their ribose analogs were compared. Characteristic long‐range ¹H? ¹⁵N coupling constants, measured by using ¹H? ¹⁵N gradient‐selected single‐quantum multiple bond correlation (GSQMBC), are also reported and discussed. All compounds investigated here belong to cytokinins, an important group of plant hormones. Copyright © 2010 John Wiley & Sons, Ltd.     

A Novel Strategy for Quantifying Clopidogrel Using Square‐wave Voltammetry and a Boron‐doped Diamond Film

The voltammetric behavior of clopidogrel bisulfate (CLO), an antiplatelet agent, was investigated for the first time in the literature on a cathodically pretreated boron‐doped diamond electrode (CP‐BDDE) using cyclic (CV) and square‐wave voltammetry (SWV). It was observed an anodic peak for CLO, suitable for analytical purposes, at about 1.15 V (vs. Ag/AgCl (3.0 mol L^?1 KCl)) by CV in Britton‐Robinson buffer solution (pH 5.0). On the physical‐chemical characterization of the interface phenomena, it was proved that electrode reaction of the analyte was controlled by a diffusion process. At optimized square‐wave parameters (pulse amplitude of 60 mV, frequency of 30 Hz and scan increment of 3 mV), the obtained analytical curve was linear for the CLO concentration range from 0.60 to 60.0 μmol L^?1, with a detection limit of 0.60 μmol L^?1. The simple, rapid and greener analytical method, based on CP‐BDDE electrochemical sensor, was successfully applied in real samples (pharmaceuticals and urine).     

Ultrasound Assisted Emulsification Microextraction Based on dimetyl (E)‐2‐[(Z)‐1‐acetyl)‐2‐hydroxy‐1‐propenyl]‐2‐butenedioate for Determination of Total Amount of Iron in Water and Tea Samples

An ultrasound assisted emulsification microextraction (USAEME) is successfully used for extraction and determination of trace amount of iron in water and tea samples, followed by flame atomic absorption spectroscopy (FAAS). In this approach, a new synthetic ligand dimetyl (E)‐2‐[(Z)‐1‐acetyl)‐2‐hydroxy‐1‐propenyl]‐2‐butenedioate (DAHPB) is used as chelating agent and chloroform is selected as an extraction solvent. The factors influencing the complex formation and extraction by USAEME method are optimized. These factors are extraction solvent type as well as extraction volume, time, temperature, pH, and the amount of chelating agent. Under optimum conditions, an enrichment factor of 202.9 is obtained from only 7.1 mL of aqueous phase. The calibration graph using the preconcentration system for iron is linear between 40.0 and 800.0 μg L^?1 with a detection limit of 7.4 μg L^?1. The relative standard deviation (R.S.D) for ten replicate measurements of 500.0 μg L^?1 of iron is 2.5%.