Determination of 19 sulfonamides residues in pork samples by combining QuEChERS with dispersive liquid–liquid microextraction followed by UHPLC–MS/MS

A new simple and rapid pretreatment method for simultaneous determination of 19 sulfonamides in pork samples was developed through combining the QuEChERS method with dispersive liquid–liquid microextraction followed by ultra‐high performance liquid chromatography with tandem mass spectrometry. The sample preparation involves extraction/partitioning with QuEChERS method followed by dispersive liquid–liquid microextraction using tetrachloroethane as extractive solvent and the acetonitrile extract as dispersive solvent that obtained by QuEChERS. The enriched tetrachloroethane organic phase by dispersive liquid–liquid microextraction was evaporated, reconstituted with 100 μL acetonitrile/water (1:9 v/v) and injected into an ultra‐high performance liquid chromatography with a mobile phase composed of acetonitrile and 0.1% v/v formic acid under gradient elution and separated using a BHE C₁₈ column. Various parameters affecting the extraction efficiency were investigated. Matrix‐matched calibration curves were established. Good linear relationships were obtained for all analytes in a range of 2.0–100 μg/kg and the limits of detection were 0.04–0.49 μg/kg. Average recoveries at three spiking levels were in the range of 78.3–106.1% with relative standard deviations less than 12.7% (n = 6). The developed method was successfully applied to determine sulfonamide residues in pork samples.     

Simultaneous determination of simazine,cyanazine, and atrazine in honey samples by dispersive liquid–liquid microextraction combined with high‐performance liquid chromatography

A rapid and simple sample preparation method was developed for simultaneous determination of three triazine herbicides in honey samples. The selected herbicides were extracted from honey samples by ionic liquid dispersive liquid–liquid microextraction, separated on a C₁₈ column (250 mm × 4.6 mm id, 5 μm) using acetonitrile and H₂O as the mobile phase with gradient elution, and then detected by high‐performance liquid chromatography. The parameters, such as the type and volume of the extraction and disperser solvent, ion strength, pH, extraction time, and centrifuge time were optimized in order to provide the excellent extraction performance. Good linearity was showed for all the target herbicides over the tested concentration range with correlation coefficient higher than 0.994. Three spiked levels (0.005, 0.05, 0.10 mg/kg) were applied for determination of the recoveries of the targets in honey samples in the range of 80–103% with relative standard deviations not larger than 10.6%. The limits of quantification for the analytes ranged between 1.5 and 4.0 μg/kg. The developed method was applied for determination of the target compounds residues in real samples.     

Rapid screening of amitraz and its metabolite residues in honey using a quick,easy, cheap,effective, rugged,and safe extraction method coupled with UHPLC and Q Exactive

A method for determining amitraz and 2,4‐dimethylaniline in honey was established by using ultra‐high‐performance liquid chromatoghaphy and Q Exactive after applying quick, easy, cheap, effective, rugged, and safe extracting process. A suitable extraction method was designed to extract the amitraz and 2,4‐dimethylaniline after a suitable amount of honey samples was dissolved. A Thermo Syncronis C₁₈ column (100 × 2.1 mm, 1.7 μm) was used for chromatographic separation of the samples. Then the two compounds were quantitatively analyzed via a program of Q Exactive. The linearity of amitraz and 2,4‐dimethylaniline was good in the concentration range of 0.5–100 μg/L, and the correlation coefficient R² was >0.99. The average recovery and relative standard deviation of each component were 81.3–90.0% and 5.1–7.2%. The 24‐ and 48‐h test results showed that the sample needed to be tested within 24 h. The limit of detection was 0.1 μg/kg for amitraz and 2,4‐dimethylaniline, whereas for both the limit of quantitation was 0.3 μg/kg.     

Simultaneous determination of novel β-lactamase inhibitor WCK 4234 and Meropenem in dog plasma by LC–MS/MS and its application to preclinical pharmacokinetic study

A precise and accurate liquid chromatography–tandem mass spectrometric (LC–MS/MS) bioanalytical method has been developed and validated for the simultaneous quantification of WCK 4234 and meropenem (MEM) in dog plasma. Protein precipitation using acetonitrile was employed as a sample preparation approach. Cefepime was used as an internal standard. The developed method was selective, sensitive (limit of quantification, 0.075 μg/ml for both drugs), accurate (recovery > 90%), precise (CV < 10%) and linear (r² ≥ 0.99, concentration range 0.075–120 μg/ml for both analytes). The developed method was successfully applied for the determination of both drugs in plasma to assess the pharmacokinetics in beagle dogs. WCK 4234 + MEM in a 1:1 ratio at 15 + 15 and 30 + 30 mg/kg doses were administered by the intravenous route. The mean plasma concentration and area under the concentration–time curve of WCK 4234 ranged from 38.3 to 77.4 μg/ml and from 47.8 to 77.1 μg h/ml, respectively, and the values for MEM ranged from 52.2 to 115.3 μg/ml and 70.5 to 133.6 μg h/ml respectively. The elimination half-life of WCK 4234 and MEM was around 0.8 h.     

Magnetic micro‐solid‐phase extraction based on magnetite‐MCM‐41 with gas chromatography–mass spectrometry for the determination of antidepressant drugs in biological fluids

A new facile magnetic micro‐solid‐phase extraction coupled to gas chromatography and mass spectrometry detection was developed for the extraction and determination of selected antidepressant drugs in biological fluids using magnetite‐MCM‐41 as adsorbent. The synthesized sorbent was characterized by several spectroscopic techniques. The maximum extraction efficiency for extraction of 500 μg/L antidepressant drugs from aqueous solution was obtained with 15 mg of magnetite‐MCM‐41 at pH 12. The analyte was desorbed using 100 μL of acetonitrile prior to gas chromatography determination. This method was rapid in which the adsorption procedure was completed in 60 s. Under the optimized conditions using 15 mL of antidepressant drugs sample, the calibration curve showed good linearity in the range of 0.05–500 μg/L (r ² = 0.996–0.999). Good limits of detection (0.008–0.010 μg/L) were obtained for the analytes with good relative standard deviations of <8.0% (n  = 5) for the determination of 0.1, 5.0, and 500.0 μg/L of antidepressant drugs. This method was successfully applied to the determination of amitriptyline and chlorpromazine in plasma and urine samples. The recoveries of spiked plasma and urine samples were in the range of 86.1–115.4%. Results indicate that magnetite micro‐solid‐phase extraction with gas chromatography and mass spectrometry is a convenient, fast, and economical method for the extraction and determination of amitriptyline and chlorpromazine in biological samples.     

Magnetic functionalized graphene oxide combined with ultra-high performance liquid chromatography for trace detection of succinate dehydrogenase inhibitor fungicides in food

In this study, an efficient, sensitive, and convenient magnetic solid-phase extraction method combined with ultra-high performance liquid chromatography-tandem mass spectrometry (MSPE-UHPLC-MS/MS) was developed for the simultaneous determination of 19 succinate dehydrogenase inhibitor fungicide residues in six different food matrices The synthesized tetraethylenepentamine magnetic graphene oxide nanocomposite showed the advantages of good dispersibility, large specific surface area (113.93 m²/g) and large pore volume (0.25 cm³/g), making it an ideal succinate dehydrogenase inhibitor pretreatment adsorbent. The MSPE-UHPLC-MS/MS method showed linearity in the range of 5.0–800.0 μg/kg, with a correlation coefficient (R²) > 0.99, and a limit of quantification of 5 μg/kg. The recovery of succinate dehydrogenase inhibitor fungicides was in the range of 71.2%–119.4%. The MSPE method is simple, rapid, and efficient, making it an ideal alternative to sample pretreatment in the determination of trace succinate dehydrogenase inhibitor fungicides in complex matrices.     

Development of a mesoporous silica based solid-phase extraction and ultra-performance liquid chromatography–MS/MS method for quantifying lignans in Justicia procumbens

Justicia procumbens is a food and medicine homologous variety, popularly used for making vegetable soups. In this study, a novel mesoporous silica was synthesized and used as the sorbent of SPE for the purification of lignans from J. procumbens. A laboratory-made SPE cartridge was packed with 100 mg of mesoporous silica, which was washed with 10% methanol and eluted using 0.8 mL acetonitrile after sample loading. Afterward, the extract was analyzed by ultra-performance liquid chromatography (UPLC) and MS/MS. All the lignans were efficiently separated in 6 min with the noise level in the range of 50–150 cps. 6′-Hydroxy justicidin B, 6′-hydroxy justicidin A, justicidin B, chinensinaphthol methyl ether, justicidin C, and neojusticdin A were identified to be the dominant molecular species in J. procumbens with contents of 0.065−0.37 mg/g in three tested sample batches from different geographic origins. In conclusion, the proposed mesoporous silica based SPE UPLC–MS/MS method is efficient in linearity (R² = 0.9989−0.9996), sensitivity (LOD ≤0.13 μg/kg and LOQ ≤0.42 μg/kg), precision (RSD_intra-day ≤3.12 and RSD_inter-day ≤4.56), and recovery (83.42−96.11%, RSD ≤2.88%).     

Simultaneous determination of 17 bisphenols in polycarbonate by ultra‐high performance supercritical fluid chromatography with tandem mass spectrometry

A novel method was developed for the first time for the determination of 17 bisphenols by ultra‐high performance supercritical fluid chromatography with tandem mass spectrometry. Under the optimal conditions, 17 bisphenols were separated successfully on a high density diol column in 9 min using methanol and carbon dioxide as mobile phase. 0.02% ammonium hydroxide/methanol v/v was used as the post‐column compensation solvent to improve response of mass spectrometry. Linear relations of matrix‐matched calibration curve were favorable over the selected concentration range of 1–100 μg/kg with correlation coefficients greater than 0.9981. The method limit of detection and limit of quantitation were 0.1–0.5 μg/kg and 0.5–2.5 μg/kg, respectively. The average recoveries at three spiked levels in polycarbonate were in the range of 81.8–114.5%. Intra‐day and inter‐day precisions for six replicates were below 15.0%. This method was successfully applied to determine bisphenols in polycarbonate.     

Analysis of 16 phthalic acid esters in food simulants from plastic food contact materials by LC‐ESI‐MS/MS

An RP LC‐ESI‐MS/MS method for the determination of the migration of 16 primary phthalic acid esters from plastic samples has been developed using distilled water, 3% acetic acid, 10% alcohol, and olive oil as food simulants. Detection limits were 1.6–18.5 μg/kg in distilled water, 1.4–17.3 μg/kg in 3% acetic acid, 1.4–19.2 μg/kg in 10% alcohol, and 31.9–390.8 μg/kg in olive oil. The RSDs were in the range of 0.07–11.28%. The real plastic products inspection showed that only few analyzed samples were phthalates contaminated. Bis‐2‐ethylhexyl ester and dibutyl phthalate were the common items migrated from the plastic products into food and feeds, but the migration concentrations were far below the limits set by European Union (1.5 mg/kg for bis‐2‐ethylhexyl ester and 0.3 mg/kg for dibutyl phthalate).     

Simultaneous determination of florfenicol with its metabolite based on modified quick,easy, cheap,effective, rugged,and safe sample pretreatment and evaluation of their degradation behavior in agricultural soils

A simple and simultaneous method for the determination of florfenicol and its metabolite florfenicol amine in agricultural soils using modified quick, easy, cheap, effective, rugged, and safe sample pretreatment and reversed‐phase high‐performance liquid chromatography with tandem mass spectrometry is presented. Florfenicol and its metabolite florfenicol amine residues in agricultural soils were extracted with alkalized acetonitrile and an aliquot was cleaned up with Si(CH₂)₃NH (CH₂)₂NH₂ and C₁₈ sorbent, which were powder materials. High‐performance liquid chromatography with tandem mass spectrometry was applied to simultaneously determine the level of florfenicol and florfenicol amine in agricultural soils. Excellent linearity was achieved for florfenicol and florfenicol amine over a range of concentrations from 0.1–500 μg/L with coefficients more than 0.99. Average recoveries at four different levels (0.005, 0.05, 0.5, and 5.0 mg/kg) for florfenicol and florfenicol amine ranged from 73.6–94.9% with relative standard deviations of 2.9–12.5%. The limits of detection for florfenicol and florfenicol amine in agricultural soils were 2.0 μg/kg, and the limits of quantification were 6.0 μg/kg. Based on this method, the degradation behavior of florfenicol and its metabolite florfenicol amine in three soils (Nanchang, Hangzhou, and Changchun) under sterilized and native conditions was investigated and the transformation rate of florfenicol amine from florfenicol was evaluated.     

Sensitive determination of typical phenols in environmental water samples by magnetic solid‐phase extraction with polyaniline@SiO2@Fe as the adsorbents before HPLC

A novel magnetic core–shell material polyaniline@SiO₂@Fe (PANI@SiO₂@Fe) has been successfully synthesized and investigated as an effective adsorbent for the magnetic solid‐phase extraction of typical endocrine disrupting compounds such as bisphenol A, tetrabromobisphenol A, and 4‐nonylphenol from water samples. The morphology of the as‐prepared PANI@SiO₂@Fe was characterized by transmission electron microscopy and X‐ray diffraction. The main parameters that influenced the enrichment performance such as the kind of eluent, amount of adsorbent, volume of eluent, adsorption time, elution time, ionic strength, pH, concentration of humic acid, and sample volume were investigated. Under the optimal conditions, a good linear relationship was found in the range of 0.05–100 μg/L for bisphenol A, 0.05–300 μg/L for tetrabromobisphenol A, and 0.05–250 μg/L for 4‐nonylphenol, respectively. The correlation coefficients are all above 0.995. The limits of detection were in the range of 0.009–0.04 μg/L, and precisions were under 3.73% (n  = 6). The real water analysis indicated that the spiked recoveries were in the range of 92.9–98.9% (n  = 3). All these results indicated that the developed method was an efficient tool for the analysis of bisphenol A, tetrabromobisphenol A, and 4‐nonylphenol.     

Preparation of an acryloyl β‐cyclodextrin‐silica hybrid monolithic column and its application in pipette tip solid‐phase extraction and HPLC analysis of methyl parathion and fenthion

An acryloyl β‐cyclodextrin‐silica hybrid monolithic column for pipette tip solid‐phase extraction and high‐performance liquid chromatography determination of methyl parathion and fenthion has been prepared through a sol–gel polymerization method. The synthesis conditions, including the volume of cross‐linker and the ratio of inorganic solution to organic solution, were optimized. The prepared monolithic column was characterized by thermogravimetric analysis, scanning electron microscopy, and Fourier transform infrared spectroscopy. The eluent type, volume and flow rate, sample volume, flow rate, acidity, and ionic strength were optimized in detail. Under the optimized conditions, a simple and sensitive pipette tip solid‐phase extraction with high‐performance liquid chromatography method was developed for the determination of methyl parathion and fenthion in lettuce. The method yielded a linear calibration curve in the concentration ranges of 15–400 μg/kg for methyl parathion and 20–400 μg/kg for fenthion with correlation coefficients of above 0.9957. The limits of detection were 4.5 μg/kg for methyl parathion and 6.0 μg/kg for fenthion, respectively. The recoveries of methyl parathion and fenthion spiked in lettuce ranged from 96.0 to 104.2% with relative standard deviations less than 8.4%.     

Simultaneous derivatization and air‐assisted liquid–liquid microextraction of some parabens in personal care products and their determination by GC with flame ionization detection

A simultaneous derivatization/air‐assisted liquid–liquid microextraction technique has been developed for the sample pretreatment of some parabens in aqueous samples. The analytes were derivatized and extracted simultaneously by a fast reaction/extraction with butylchloroformate (derivatization agent/extraction solvent) from the aqueous samples and then analyzed by GC with flame ionization detection. The effect of catalyst type and volume, derivatization agent/extraction solvent volume, ionic strength of aqueous solution, pH, numbers of extraction, aqueous sample volume, etc. on the method efficiency was investigated. Calibration graphs were linear in the range of 2–5000 μg/L with squared correlation coefficients >0.990. Enhancement factors and enrichment factors ranged from 1535 to 1941 and 268 to 343, respectively. Detection limits were obtained in the range of 0.41–0.62 μg/L. The RSDs for the extraction and determination of 250 μg/L of each paraben were <4.9% (n = 6). In this method, the derivatization agent and extraction solvent were the same and there is no need for a dispersive solvent, which is common in a traditional dispersive liquid–liquid microextraction technique. Furthermore, the sample preparation time is very short.     

Fe3O4 nanoparticles coated with polyhedral oligomeric silsesquioxanes and β‐cyclodextrin for magnetic solid‐phase extraction of carbaryl and carbofuran

In this study, porous sandwich structure Fe₃O₄ nanoparticles coated by polyhedral oligomeric silsesquioxanes and β‐cyclodextrin were prepared by surface polymerization and were used as the magnetic solid phase extraction adsorbent for the extraction and determination of carbaryl and carbofuran. The Fe₃O₄ nanoparticles coated with polyhedral oligomeric silsesquioxanes and β‐cyclodextrin were characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, thermogravimetric analysis, vibrating sample magnetometry, and scanning electron microscopy. After optimizing the extraction conditions, a method that combined magnetic solid phase extraction with high‐performance liquid chromatography was developed for the determination of carbaryl and carbofuran in apple. The method exhibited a good linearity in the range of 2–400 μg/kg for carbaryl and carbofuran (R² = 0.9995), respectively. The limits of detection were 0.5 μg/kg of carbaryl and 0.7 μg/kg for carbofuran in apple, respectively. Extraction recoveries ranged from 94.2 to 103.1% with the preconcentration factor of 300 and the relative standard deviations were less than 5.9%. These results indicated that the method combined magnetic solid phase extraction with high‐performance liquid chromatography and was promising for the determination of carbaryl and carbofuran at trace amounts.     

Determination of glyoxal,methylglyoxal, and diacetyl in red ginseng products using dispersive liquid–liquid microextraction coupled with GC–MS

A simple and rapid dispersive liquid–liquid microextraction method coupled with gas chromatography and mass spectrometry was applied for the determination of glyoxal as quinoxaline, methylglyoxal as 2‐methylquinoxaline, and diacetyl as 2,3‐dimethylquinoxaline in red ginseng products. The performance of the proposed method was evaluated under optimum extraction conditions (extraction solvent: chloroform 100 μL, disperser solvent: methanol 200 μL, derivatizing agent concentration: 5 g/L, reaction time: 1 h, and no addition of salt). The limit of detection and limit of quantitation were 1.30 and 4.33 μg/L for glyoxal, 1.86 and 6.20 μg/L for methylglyoxal, and 1.45 and 4.82 μg/L for diacetyl. The intra‐ and interday relative standard deviations were <4.95 and 5.80%, respectively. The relative recoveries were 92.4–103.9% in red ginseng concentrate and 99.4–110.7% in juice samples. Red ginseng concentrates were found to contain 191–4274 μg/kg of glyoxal, 1336–4798 μg/kg of methylglyoxal, and 0–830 μg/kg of diacetyl, whereas for red ginseng juices, the respective concentrations were 72–865, 69–3613, and 6–344 μg/L.     

A convenient ultrasound‐assisted saponification for the simultaneous determination of vitamin E isomers in vegetable oil by HPLC with fluorescence detection

An efficient ultrasound‐assisted saponification was developed for simultaneous determination of vitamin E isomers in vegetable oil by high‐performance liquid chromatography with fluorescence detection. The samples were saponified ultrasonically with potassium hydroxide solution for only 7 min, then the analytes were extracted with ether. Vitamin E isomers were separated on a C₁₈ column at 25°C with a mobile phase of methanol/acetonitrile (81:19, v/v) at a flow rate of 0.8 mL/min. Fluorescence detection was operated at 290 nm of excitation wavelength and 327 nm of emission wavelength. Under the optimized conditions, good linearities over the range of 0.001–8.00 μg/mL (r > 0.999) were obtained. Mean recoveries of the method were 88.0–106%, with intra‐ and interday RSDs less than 11.8 and 12.8%, respectively. The detection limits and quantification limits of the method were 0.30–1.8 and 1.0–6.1 μg/kg, respectively. The recoveries of this method were much higher than that of the quick, easy, cheap, effective, rugged, and safe method and direct dilution method, but were similar to those of hot saponification. This proposed method provides reliable, simple, and rapid quantification of vitamin E isomers in vegetable oils. Five kinds of vegetable oils were analyzed, the quantification results were within the ranges reported by other authors.     

Characterization and application of a lanthanide‐based metal–organic framework in the development and validation of a matrix solid‐phase dispersion procedure for pesticide extraction on peppers (Capsicum annuum L.) with gas chromatography–mass spectrometry

The metal–organic framework [(La_0.9Sm_0.1)₂(DPA)₃(H₂O)₃]_∞ was synthetized and characterized by X‐ray diffractometry, differential thermogravimetric analysis, and infrared spectroscopy. The material was tested for the development and validation of a matrix solid‐phase dispersion procedure for extraction of atrazine, bifenthrin, bromuconazole, clofentezine, fenbuconazole, flumetralin, procymidone, and pirimicarb, from peppers, with analysis using gas chromatography with mass spectrometry in the selected ion monitoring mode. The method developed was linear over the range tested (50.0–1000.0 μg/kg for procymidone and 200.0–1000.0 μg/kg for all other pesticides), with correlation coefficients ranging from 0.9930 to 0.9992. Experiments were carried out at 250.0, 500.0, and 1000.0 μg/kg fortification levels, and resulted in recoveries in the range of 52.7–135.0%, with coefficient of variation values between 5.2 and 5.4%, respectively, for [(La_0.9Sm_0.1)₂(DPA)₃(H₂O)₃]_∞ sorbent. Detection and quantification limits ranged from 16.0 to 67.0 μg/kg and from 50.0 to 200.0 μg/kg, respectively, for the different pesticides studied. The results were compared with literature data. The developed and validated method was applied to real samples. The analysis detected the presence of residues of pesticides procymidone, fenbuconazole, flumetralin, clofentezine, atrazine, and bifenthrin.     

Rapid and accurate determination of trace volatile sulfur compounds in human halitosis by an adaptable active sampling system coupling with gas chromatography

Halitosis with the main components of trace volatile sulfur compounds widely affects the quality of life. In this study, an adaptable active sampling system with two sample‐collection modes of direct injection and solid‐phase microextraction was developed for the rapid and precise determination of trace volatile sulfur compounds in human halitosis coupled with gas chromatography–flame photometric detection. The active sampling system was well designed and produced for efficiently sampling and precisely determining trace volatile targets in halitosis under the optimized sampling and detection conditions. The analytical method established was successfully applied for the determination of trace targets in halitosis. The limits of detection of H₂S, CH₃SH, and CH₃SCH₃ by direct injection were 0.0140–23.0 μg/L with good recoveries ranging from 82.2 to 118% and satisfactory relative standard deviations of 0.4–9.5% (n = 3), respectively. The limit of detections of CH₃SH and CH₃SCH₃ by solid‐phase microextraction were 2.03 and 0.186 × 10^?3 μg/L with good recoveries ranging from 98.3 to 108% and relative standard deviations of 5.9–9.0% (n = 3). Trace volatile targets in positive real samples could be actually found and quantified by combination of direct injection and solid‐phase microextraction. This method was reliable and efficient for the determination of trace volatile sulfur compounds in halitosis.     

Application of aeration‐assisted homogeneous liquid–liquid microextraction procedure using Box–Behnken design for determination of curcumin by HPLC

A simple, efficient, and rapid sample preparation method based on aeration‐assisted homogeneous liquid–liquid microextraction was developed for determination of curcumin in food samples by high‐performance liquid chromatography. The centrifuge step has been eliminated in this procedure. The effects of some variables, such as pH, volume of extraction solvent, extraction time, and salt effect, were studied through a Box–Behnken design method. Under the optimum conditions, calibration curves of curcumin were linear in the range of 0.08‐4000 μg/mL with R² = 0.997. Limit of detection and relative standard deviation were 0.019 μg/mL and 3.01%, respectively. The preconcentration factor achieved was 166. The proposed method was successfully applied to determination of curcumin in various food samples.     

Simultaneous determination of pyrametostrobin and its two metabolites in cucumber and soil using a quick,easy, cheap,effective, rugged,and safe method with HPLC–MS/MS

An easy, effective and sensitive analytical method for the simultaneous determination of a novel fungicide pyrametostrobin and its two metabolites pyrametostrobin‐M1 and pyrametostrobin‐M2 in cucumber and soil was developed using a quick, easy, cheap, effective, rugged, and safe method with high‐performance liquid chromatography and tandem mass spectrometry. The extraction solvent was acetonitrile, and cleanup sorbents were primary secondary amine and graphitized carbon black for cucumber samples and primary secondary amine for soil samples. The three target compounds were successfully separated between 3.2 and 3.9 min using a Waters CORTECS™ C₁₈ column connected to an electrospray ionization source. All the matrix‐matched samples at three fortified levels (10, 100 and 1000  μg/kg) provided satisfactory recoveries in the range of 78.8–93.8% with relative standard deviations below 6.9%. The limits of quantitation for the three compounds were below 0.183 μg/kg. The proposed method was validated by analyzing real samples.