Total reflection X-ray fluorescence spectrometric determination of elements in water hyacinth from the Lerma River

The Lerma River is one of the most polluted body water in Mexico. For this reason, only the highly resistant organisms such as water hyacinth are able to reproduce in this river. The aim of this work was to evaluate the concentration of K, S, Fe, Ca, Mn, Ti, Zn, Sr, Rb, Cu, Cr, Ni, Pb and Br in roots of water hyacinth (Eichhornia crassipes) from the Lerma River. The samples were collected from five sites in the river and analyzed in triplicate using a TXRF Spectrometer ‘TX-2000 Ital Structures’ with a Si(Li) detector and a resolution of 140 eV (FWHM) at Mn Kα. A Mo tube (40 kV, 30 mA) with 17.4 KeV excitation energy was used for a counting time of 500 s. Results show that the average metal concentration in the water hyacinth roots decrease in the following order: K (9698.2 µg/g) > S (7593.3 µg/g) > Fe (4406.6 µg/g) > Ca (2601.8 µg/g) > Mn (604.2 µg/g) > Ti (230.7 µg/g) > Zn (51.65 µg/g) > Sr (43.55 µg/g) > Rb (18.61 µg/g) > Cu (12.78 µg/g) > Cr (6.45 µg/g) > Ni (4.68 µg/g) > Pb (4.32 µg/g) > Br (4.31 µg/g) and the bioconcentration factors in the water hyacinth decrease in the sequence: Ti > Fe > Mn > Cu > Ni > Zn > S > Pb > Rb > K > Cr > Sr > Br > Ca. The concentrations in roots of water hyacinth reflect the high pollution level of the river.     

Thermodynamic characteristic of complex formation of some metals with 3-(4-chlorophenylazo)pentane-2,4-dione in aqueous ethanol

Effective charges of atoms in tautomeric forms (enol-azo, keto-azo, hydrazo) of 3-(4-chlorophenylazo) pentane-2,4-dione (L) have been determined by MO LCAO in the Hückel approximation. The complex formation of a series of metals with L in aqueous ethanol has been investigated by potentiometric and conductometric titration. Based on the results of potentiometric titration, the standard thermodynamic functions of complex formation have been established. They vary in the following order:

Quantitative analysis of triazine herbicides in environmental samples by using high performance liquid chromatography and diode array detection combined with second-order calibration based on an alternating penalty trilinear decomposition algorithm

A novel application of second-order calibration method based on an alternating penalty trilinear decomposition (APTLD) algorithm is presented to treat the data from high performance liquid chromatography-diode array detection (HPLC-DAD). The method makes it possible to accurately and reliably analyze atrazine (ATR), ametryn (AME) and prometryne (PRO) contents in soil, river sediment and wastewater samples. Satisfactory results are obtained although the elution and spectral profiles of the analytes are heavily overlapped with the background in environmental samples. The obtained average recoveries for ATR, AME and PRO are 99.7 ± 1.5, 98.4 ± 4.7 and 97.0 ± 4.4% in soil samples, 100.1 ± 3.2, 100.7 ± 3.4 and 96.4 ± 3.8% in river sediment samples, and 100.1 ± 3.5, 101.8 ± 4.2 and 101.4 ± 3.6% in wastewater samples, respectively. Furthermore, the accuracy and precision of the proposed method are evaluated with the elliptical joint confidence region (EJCR) test. It lights a new avenue to determine quantitatively herbicides in environmental samples with a simple pretreatment procedure and provides the scientific basis for an improved environment management through a better understanding of the wastewater-soil-river sediment system as a whole.     

Re-examination of 7,7′-dimethyl-7-germanorbornadiene photocleavage in solution and in organic glasses

Dimethylgermylene and its Ge=Ge doubly bonded dimer, tetramethyldigermene, have been characterized directly in solution by 308-nm laser flash photolysis in n-hexane solution, as well as 254-nm photolysis in hydrocarbon glasses at t = 77 K. An absorption band maximum of λ _max ≈ 430 nm and molar absorption coefficient of ε ≈ 2,700 M⁻¹ cm⁻¹ have been shown to be attributable to low-temperature glasses, while the absorption band maximum of λ _max ≈ 480 nm and molar absorption coefficient of ε ≈ 2,400 M⁻¹ cm⁻¹ have been shown to be related to dimethylgermylene in n-hexane solution. The molar absorption coefficient of tetramethyldigermene (λ _max ≈ 380 nm) was determined to be ε ≈ 84,000 M⁻¹ cm⁻¹. The germylene is formed via (formal) cheletropic photocycloreversion of 7,7′-dimethylgerma-1,4,5,6-tetraphenyl-2,3-benzo-norbornadiene. Tetramethyldigermene and 1,2,3,4-tetraphenylnaphthalene in the triplet state were formed, together with dimethylgermylene. We attempted to explain the various contradictory interpretations of experimental data existing in the literature on this reaction.     

Interferences in the analysis of nanomolar concentrations of nitrate and phosphate in oceanic waters

This paper reports on investigations into interferences with the measurements of nanomolar nitrate + nitrite and soluble reactive phosphate (SRP) in oceanic surface seawater using a segmented continuous flow autoanalyser (SCFA) interfaced with a liquid-waveguide capillary flow-cell (LWCC). The interferences of silicate and arsenate with the analysis of SRP, the effect of sample filtration on the measurement of nanomolar nitrate + nitrite and SRP concentrations, and the stability of samples during storage are described.The investigation into the effect of arsenate (concentrations up to 100 nM) on phosphate analysis (concentrations up to 50 nM) indicated that the arsenate interference scaled linearly with phosphate concentrations, resulting in an overestimation of SRP concentrations of 4.6 ± 1.4% for an assumed arsenate concentration of 20 nM. The effect of added Si(OH)₄ was to increase SRP signals by up to 36 ± 19 nM (at 100 μM Si(OH)₄). However, at silicate concentrations below 1.5 μM, which are typically observed in oligotrophic surface ocean waters, the effect of silicate on the phosphate analysis was much smaller (≤0.78 ± 0.15 nM change in SRP). Since arsenate and silicate interferences vary between analytical approaches used for nanomolar SRP analysis, it is important that the interferences are systematically assessed in any newly developed analytical system.Filtration of surface seawater samples resulted in a decrease in concentration of 1.7-2.7 nM (±0.5 nM) SRP, and a small decrease in nitrate concentrations which was within the precision of the method (±0.6 nM). A stability study indicated that storage of very low concentration nutrient samples in the dark at 4 °C for less than 24 h resulted in no statistically significant changes in nutrient concentrations. Freezing unfiltered surface seawater samples from an oligotrophic ocean region resulted in a small but significant increase in the SRP concentration from 12.0 ± 1.3 nM (n = 3) to 14.7 ± 0.6 nM (n = 3) (Student's t-test; p = 0.021). The corresponding change in nitrate concentration was not significant (Student's t-test; p > 0.05).     

Fractionation of metals and metalloids by chemical bonding from particles accumulated by electrostatic precipitation in an Argentine thermal power plant

A study was undertaken to evaluate the distribution of Al, As, Cr, Cu, Fe, Mn, Ni, Pb, Ti, V and Zn in fly ashes collected in the electrostatic precipitator of a thermal power plant in San Nicolás (Argentina). Five samples were collected during one week of operation. For the fractionation, the scheme applied consisted in extracting the elements in four fractions namely (i) soluble and exchangeable elements; (ii) carbonates, oxides and reducible elements; (iii) bound to sulfidic metals; and (iv) residual elements. Metals and metalloids at μg g^− 1 level were determined in each fraction by inductively coupled plasma optical emission spectrometry (ICP OES). For validation, a standard reference material (SRM 1633 coal fly ash) from NIST was subjected to the same chemical sequential extraction procedure that the samples. X-ray diffraction powder (XRD) analysis and scanning electron microscopy (SEM) were used to characterize the major minerals present in the matrix. Total analyte concentration (in μg g^− 1) varied from 10.6 for Pb to 17,622 for Al. Minimum and maximum concentrations (in μg g^− 1) found in individual samples in the four fractions were: Al, 92.7–9668; As, < 0.3–143; Cr, 2.0–10.4; Cu, < 0.2–35.6; Fe, < 0.3–4992; Mn, < 0.1–128; Ni, < 0.3–139; Pb, < 0.5–9.1; Ti, < 0.3–2243; V, 17.0–112.9; and Zn, < 0.1–68.2. The leachability of the 11 elements under study proved to be different. Low percentages of Al (1%), V (7%) and Cr (8%) were detected in the most bioavailable fraction. Arsenic was found to be most abundant in the non-silicate phase, represented by the second and third fractions, while Cr, Fe, Ni, Pb and Zn were mostly associated to the residual fraction.     

Fast sequential multi-element determination of Ca,Mg, K,Cu, Fe,Mn and Zn for foliar diagnosis using high-resolution continuum source flame atomic absorption spectrometry: Feasibility of secondary lines,side pixel registration and least-squares background correction

The fast sequential multi-element determination of Ca, Mg, K, Cu, Fe, Mn and Zn in plant tissues by high-resolution continuum source flame atomic absorption spectrometry is proposed. For this, the main lines for Cu (324.754 nm), Fe (248.327 nm), Mn (279.482 nm) and Zn (213.857 nm) were selected, and the secondary lines for Ca (239.856 nm), Mg (202.582 nm) and K (404.414 nm) were evaluated. The side pixel registration approach was studied to reduce sensitivity and extend the linear working range for Mg by measuring at wings (202.576 nm; 202.577 nm; 202.578 nm; 202.580 nm; 202.585 nm; 202.586 nm; 202.587 nm; 202.588 nm) of the secondary line. The interference caused by NO bands on Zn at 213.857 nm was removed using the least-squares background correction. Using the main lines for Cu, Fe, Mn and Zn, secondary lines for Ca and K, and line wing at 202.588 nm for Mg, and 5 mL min^− 1 sample flow-rate, calibration curves in the 0.1–0.5 mg L^− 1 Cu, 0.5–4.0 mg L^− 1 Fe, 0.5–4.0 mg L^− 1 Mn, 0.2–1.0 mg L^− 1 Zn, 10.0–100.0 mg L^− 1 Ca, 5.0–40.0 mg L^− 1 Mg and 50.0–250.0 mg L^− 1 K ranges were consistently obtained. Accuracy and precision were evaluated after analysis of five plant standard reference materials. Results were in agreement at a 95% confidence level (paired t-test) with certified values. The proposed method was applied to digests of sugar-cane leaves and results were close to those obtained by line-source flame atomic absorption spectrometry. Recoveries of Ca, Mg, K, Cu, Fe, Mn and Zn in the 89–103%, 84–107%, 87–103%, 85–105%, 92–106%, 91–114%, 96–114% intervals, respectively, were obtained. The limits of detection were 0.6 mg L^− 1 Ca, 0.4 mg L^− 1 Mg, 0.4 mg L^− 1 K, 7.7 µg L^− 1 Cu, 7.7 µg L^− 1 Fe, 1.5 µg L^− 1 Mn and 5.9 µg L^− 1 Zn.     

β Phase transformations in the Cu–11mass%Al alloy with Ag additions

In the Cu–Al system, due to the sluggishness of the β ↔ (α + γ₁) eutectoid reaction, the β phase can be retained metastably. During quenching, metastable β alloys undergo a martensitic transformation to a β′ phase at Al low content. The ordering reaction β ↔ β₁ precedes the martensitic transformation. The influence of Ag additions on the reactions containing the β phase in the Cu–11mass%Al alloy was studied using differential scanning calorimetry and in situ X-ray diffractometry. The results indicated that, on cooling, two reactions are occurring in the same temperature range, the β → (α + γ₁) decomposition reaction and the β → β₁ reaction, with different reaction mechanisms (diffusive for the former and ordering for the latter) and, consequently, with different reaction rates. For lower cooling rates, the dominant is the decomposition reaction and for higher cooling rates the ordering reaction prevails. On heating, the (α + γ₁) → β reverse eutectoid reaction occurs with a resulting β phase saturated with α. The increase of Ag concentration retards the β → (α + γ₁) decomposition reaction and the β → β₁ ordering reaction, which occurs in the same temperature range, becomes the predominant process.     

Biotin-avidin mediated competitive enzyme-linked immunosorbent assay to detect residues of tetracyclines in milk

Tetracycline (TC) antibiotics are widely used for prevention and control of disease because they inhibit the growth of bacteria. However, the presence of TC antibiotics residues in food causes harmful effects on consumer's health such as allergic reactions, liver damage and gastrointestinal disturbance, so that many countries have set MRLs (maximum residue levels). Therefore, it is necessary to detect tetracycline residues, to develop suitable analytical techniques to be used as routine screens and field detection.A new approach to the biotin-avidin mediated competitive ELISA is developed to determine tetracycline residues in milk. After optimization, the LOD and LOQ were 1.0 × 10^− 10 M (0.048 μg/L) and 1.0 × 10^− 9 M, respectively, and the working range from 3.16 × 10^− 10 M to 3.16 × 10^− 7 M toward TC in milk. No cross-reactivity was observed with the structurally similar compounds; chlortetracycline (13.7%), oxytetracycline (10%) and doxytetracycline (< 1%). Additionally percent recoveries of TC spiked in milk were quite satisfactory (∼ 90%). Comparing our results obtained in this work with others, it shows with the capability to detect TC ranging in MRLs (100 μg/L in milk) sufficiently with highly sensitivity in milk, and with simple pre-treatment. In addition, this method can apply to developing useful ELISA test kit for determination of TCs in milk.     

Determination of cyanide in blood by electrospray ionization tandem mass spectrometry after direct injection of dicyanogold

An electrospray ionization tandem mass spectrometric (ESI-MS-MS) method has been developed for the determination of cyanide (CN^–) in blood. Five microliters of blood was hemolyzed with 50 μL of water, then 5 μL of 1 M tetramethylammonium hydroxide solution was added to raise the pH of the hemolysate and to liberate CN^– from methemoglobin. CN^– was then reacted with NaAuCl₄ to produce dicyanogold, Au(CN)₂^–, that was extracted with 75 μL of methyl isobutyl ketone. Ten microliters of the extract was injected directly into an ESI-MS-MS instrument and quantification of CN^– was performed by selected reaction monitoring of the product ion CN^– at m/z 26, derived from the precursor ion Au(CN)₂^– at m/z 249. CN^– could be measured in the quantification range of 2.60 to 260 μg/L with the limit of detection at 0.56 μg/L in blood. This method was applied to the analysis of clinical samples and the concentrations of CN^– in the blood were as follows: 7.13 ± 2.41 μg/L for six healthy non-smokers, 3.08 ± 1.12 μg/L for six CO gas victims, 730 ± 867 μg for 21 house fire victims, and 3,030 ± 97 μg/L for a victim who ingested NaCN. The increase of CN^– in the blood of a victim who ingested NaN₃ was confirmed using MS-MS for the first time, and the concentrations of CN^– in the blood, gastric content and urine were 78.5 ± 5.5, 11.8 ± 0.5, and 11.4 ± 0.8 μg/L, respectively.     

Catalytic reduction of hazardous acid orange 10 dye by BiVO4/TiO2 nanocrystalline heterojunction and influence of aeration,FeSO4, H2O2 and FeCl3 on removal efficiency: A novel and environmentally friendly process

Bismuth vanadate in combination with titanium dioxide were synthesized by hydrothermal method and its photocatalytic activity was investigated under visible light irradiation for acid orange 10 (AO10) dye removal. The 10% BiVO₄/TiO₂ showed the highest catalytic activity in comparison with 20, 30, 40 and 50% BiVO₄/TiO₂ ratios. The removal of AO10 azo dye in aqueous solutions was studied in laboratory-scale experiments using 25 removal processes and their removal efficiencieswere evaluated, separately. The results showed that the amount of de-colorization for each oxidation process is completely different. The order of the investigated processes in removing the dye after 90 min is as follows: LED < TiO₂ < BiVO₄ < 10% BT/without LED < BiVO₄/ LED < 50% BT < 40% BT < 30% BT < 20% BT < UV/H₂O₂ < 10% BT < 5a-10 %BT < 5F-10 %BT < 10a-10 %BT < 50F-10 %BT < 20a-10 %BT < 10F-10 %BT < 20F-10 %BT < 20H_-10 %BT < 40H-10 %BT < 50H_-10 %BT < 20a-20F-10 %BT < 20a-20F-50H_-10 %BT. Among the above processes, 20a-20F-50H-10 %BT had the best removal performance and can be suggested for using in real conditions. Coagulation/precipitation process was done using 5 mg/L of FeCl₃ as post-treatment reaching efficiency of 100% in the studied system.     

The Correlations Between TCA-Glyoxalate Metabolite and Antibiotic Production of <Emphasis Type="Italic">Streptomyces</Emphasis> sp. M4018 Grown in Glycerol,Glucose, and Starch Mediums

The alterations of organic acids citrate, α-ketoglutarate, succinate, fumarate, malate production together with isocitrate lyase activity as a glyoxalate shunt enzyme, and antibiotic production of Streptomyces sp M4018 were investigated in relation to changes in the glucose, glycerol and starch concentrations (5–20 g/L) after identification as a strain of Streptomyces hiroshimensis based on phenotypic and genotypic characteristics. The highest intracellular citrate and α-ketoglutarate levels in 20 g/l of glucose, glycerol, and starch mediums were 399.47 ± 4.78, 426.93 ± 6.40, 355.84 ± 5.38 ppm and 444.81 ± 5.12, 192.96 ± 2.26, 115.20 ± 2.87 ppm, respectively. The highest succinate, malate, and fumarate levels were also determined in 20 g/l of glucose medium as 548.9 ± 11.21, 596.15 ± 8.26, and 406.42 ± 6.59 ppm and the levels were significantly higher than the levels in glycerol and starch. Extracellular organic acid levels measured also showed significant correlation with carbon source concentrations by showing negative correlation with pH levels of the growth medium. The antibiotic production of Streptomyces sp. M4018 was also higher in glucose medium as was the case also for organic acids when compared with glycerol. On the other hand, there is no production in starch.     

Development of a liquid chromatography-mass spectrometry method for the determination of ursolic acid in rat plasma and tissue: application to the pharmacokinetic and tissue distribution study

A fast and sensitive liquid chromatography–mass spectrometry method was developed for the determination of ursolic acid (UA) in rat plasma and tissues. Glycyrrhetinic acid was used as the internal standard (IS). Chromatographic separation was performed on a 3.5 μm Zorbax SB-C18 column (30 mm × 2.1 mm) with a mobile phase consisting of methanol and aqueous 10 mM ammonium acetate using gradient elution. Quantification was performed by selected ion monitoring with (m/z)⁻ 455 for UA and (m/z)⁻ 469 for the IS. The method was validated in the concentration range of 2.5 − 1470 ng mL⁻¹ for plasma samples and 20 − 11760 ng g⁻¹ for tissue homogenates. The intra- and inter-day assay of precision in plasma and tissues ranged from 1.6% to 7.1% and 3.7% to 9.0%, respectively, and the intra- and inter-day assay accuracy was 84.2 − 106.9% and 82.1 − 108.1%, respectively. Recoveries in plasma and tissues ranged from 83.2% to 106.2%. The limits of detections were 0.5 ng mL⁻¹ or 4.0 ng g⁻¹. The recoveries for all samples were >90%, except for liver, which indicated that ursolic acid may metabolize in liver. The main pharmacokinetic parameters obtained were T _max = 0.42 ± 0.11 h, C _max = 1.10 ± 0.31 μg mL⁻¹, AUC = 1.45 ± 0.21 μg h mL⁻¹ and K _a = 5.64 ± 1.89 h⁻¹. The concentrations of UA in rat lung, spleen, liver, heart, and cerebellum were studied for the first time. This method is validated and could be applicable to the investigation of the pharmacokinetics and tissue distribution of UA in rats.     

Neutron activation analysis of Ca,Cl, K,Mg, Mn,Na, P,and Sr contents in the crowns of human permanent teeth

The effect of age and gender on chemical element contents in intact crowns of permanent teeth of 84 apparently healthy 15–55 year old women (n = 38) and men (n = 46) was investigated. Mass fractions of Ca, Cl, K, Mg, Mn, Na, P, and Sr in crowns were determined by instrumental neutron activation analysis using short-lived radionuclides. Mean values (M ± SΕΜ) for female and male combined were (on dry weight basis): 350 ± 5 g/kg, 2920 ± 150 mg/kg, 839 ± 80 mg/kg, 4880 ± 240 mg/kg, 3.20 ± 0.30 mg/kg, 6240 ± 140 mg/kg, 181 ± 4 g/kg, and 293 ± 24 mg/kg respectively. A statistically significant decrease of Sr (P ≤ 0.01) and increase of Na (P ≤ 0.01) content in the tooth crowns with age was found for women. Sex-related comparison did not show any differences.     

Assessment of the health of a river ecosystem due to the impact of pollution from industrial discharge using instrumental neutron activation analysis and inductively coupled plasma-mass spectrometry

Inductively coupled plasma-mass spectrometry (ICP-MS) and neutron activation analysis (NAA) were employed in the determination of heavy metal concentrations in water, plant and sediment samples to assess the extent of heavy metal pollution in a river system which is located within an industrial zone. Elemental concentrations of As, Pb, Hg, Cr, Cu, Cd, Ni and Zn were measured in the samples. Statistical analysis was performed on the data obtained to look for trends in the pollution pattern of these elements on the river system. The trend in concentrations of heavy metals pollution in water samples is in the order of Zn > Cu > Ni > Cr > As > Pb > Hg > Cd, whereas in plants the order is Zn > Cr > Cu > Pb > Ni > As > Hg > Cd and in sediments Zn > Cu > Pb > Ni > As > Hg.     

A study of the removal of heavy metals from aqueous solutions by Moringa oleifera seeds and amine-based ligand 1,4-bis[N,N-bis(2-picoyl)amino]butane

Uptake for lead, copper, cadmium, nickel and manganese from aqueous solution using the Moringa oleifera seeds biomass (MOSB) and amine-based ligand (ABL) was investigated. Experiments on two synthetic multi-solute systems revealed that MOSB performed well in the biosorption and followed the decreasing orders Pb(II) > Cu(II) > Cd(II) > Ni(II) > Mn(II) and Zn(II) > Cu(II) > Ni(II). The general trend of the heavy metal ions uptake by the amine-based ligand followed decreased in the order Mn > Cd > Cu > Ni > Pb, which is the reverse trend for what was observed for MOSB. Comparing the single- and multi-metal solutions, there was no clear effect in the biosorption capacity of MOSB suggesting the presence of sufficient active binding sites for all metal ions studied. The MOSB performance is also not affected by pH in the range 3.5–8.     

Study of natural radionuclides in Karun river region

In this study the concentration of natural radionuclides has been investigated in soil and water of Karun river by using a high resolution (HPGe detector, n-type) γ-spectrometry. The concentrations range in water sample was 47.6 ± 5.6–130.8 ± 6.3, 0.0–23.4 ± 0.5 and 0–6.4 ± 2.0 Bq L⁻¹ for ⁴⁰K, ²³²Th and ²²⁶Ra respectively. For soil samples the concentration range of 275.7 ± 8.6–458.6 ± 6.8, 19.2 ± 5.35–41.1 ± 3.95 and 29.9 ± 1.53–50 ± 1.54 Bq kg⁻¹ was obtained respectively for ⁴⁰K, ²³²Th and ²³⁸U. ¹³⁷Cs was also detected in some part of the region in soil samples. The mean concentration of ¹³⁷Cs was 5.5 ± 0.6 Bq kg⁻¹. The origin of this activity is unknown. The average absorbed dose rate in outdoor air at a height of 1 m above the ground was found to be 54.3 ± 3.7 nGy h⁻¹. The results of this study indicate that the area has standard background radiation level.     

Chemical modification of poly(vinyl chloride) by nucleophilic substitution

The reaction of poly(vinyl chloride) (PVC) in nucleophile (Nu)/ethylene glycol (EG) or Nu/N,N-dimethylformamide (DMF) solution was found to result in the substitution of Cl in PVC with Nu from solution, in addition to the straight elimination of HCl, both of which led to the dechlorination of PVC. Examined Nu⁻ were I⁻, SCN⁻, OH⁻, N₃⁻, and the phthalimide anion. For the Nu/EG solution, elimination was favoured over substitution for all Nu⁻. The ratio of substitution to dechlorination was notable, descending in the order OH⁻ > SCN⁻ = N₃⁻ > phthalimide anion > I⁻. For the Nu/DMF solution, the ratio of substitution to dechlorination was high, in the order SCN⁻ > N₃⁻ > I⁻ > phthalimide anion. In both cases, the orders of the ratios were similar to those of the nucleophilic reactivity constant, I⁻ > SCN⁻ > N₃⁻ > phthalimide anion, except for I⁻. The low ratio for I⁻ was attributable to the elimination of HI after the substitution of Cl in PVC with I in solution, because I⁻ is a strong nucleophile, as well as an excellent leaving group. Comparing the effect of EG and DMF on the substitution of Cl in PVC with Nu in solution, the ratio of substitution to dechlorination was higher for I⁻, SCN⁻, N₃⁻, and the phthalimide anion in DMF than in EG. The substitution of Cl in PVC with Nu in solution was found to occur preferentially in DMF versus EG.     

A flow-injection chemiluminescence method for the determination of some estrogens by enhancement of luminol-hydrogen peroxide-tetrasulfonated manganese phthalocyanine reaction

A novel flow-injection chemiluminescence (FI-CL) method for the determination of estrogens is proposed, based upon its enhancing effect on the CL reaction of luminol with hydrogen peroxide catalyzed by tetrasulfonated manganese phthalocyanine (MnTSPc) in alkaline solution. Under the selected experimental conditions, a linear relationship was obtained between the CL intensity and the concentration of estrone in the range of 1.0 × 10⁻⁷ to 1.0 × 10⁻⁶ mol/l, estradiol in the range of 9.0 × 10⁻⁸ to 1.0 × 10⁻⁶ mol/l and estriol in the range of 3.0 × 10⁻⁷ to 2.0 × 10⁻⁶ mol/l, respectively. The detection limits were 5.1 × 10⁻⁸ mol/l for estrone, 7.2 × 10⁻⁹ mol/l for estradiol and 6.5 × 10⁻⁸ mol/l for estriol with a relative standard deviation of 2.8% for 5.0 × 10⁻⁷ mol/l estrone, 2.4% for 1.0 × 10⁻⁷ mol/l estradiol, and 3.1% for 7.0 × 10⁻⁷ mol/l estriol (n = 11). This method has been applied to the determination of estrogen in pharmaceutical injections and tap water with satisfactory results.     

Glucose-induced heat production, insulin secretion and lactate production in isolated Wistar rat pancreatic islets

Transplantation of pancreatic islets is efficient in improving the metabolic control and quality of life and in preventing severe hypoglycemia in patients with brittle type 1 diabetes mellitus. More accurate methods to assess islet viability would be extremely useful in designing target interventions for islet cytoprotection and in reducing the number of islets required to achieve insulin independence. Here we report on an application of calorimetry to evaluate the metabolic response of pancreatic islets to glucose stimulation. A significant increase in metabolic heat was produced by islet samples when consecutively subjected to 2.8 and 16.3 mmol L⁻¹ glucose. Under these glucose concentrations, 1000 islets released average heat values of 9.16 ± 0.71 mJ and 14.90 ± 1.21 mJ over 50 min, respectively. Additionally, the glucose stimulation indexes were 1.67 ± 0.30 for insulin, 1.72 ± 0.13 for heat and 2.91 ± 0.50 for lactate, raising the important possibility of substituting the secreted insulin index/ratio by the index/ratio of the heat released in the evaluation of Langerhans islets viability for transplantation. Altogether, our results demonstrate the applicability of calorimetry to assess the quality of isolated pancreatic islets and to study vital islet functions.