Polymers of intrinsic microporosity (PIMs): bridging the void between microporous and polymeric materials

Novel types of microporous material are required for chemoselective adsorptions, separations and heterogeneous catalysis. This concept article describes recent research directed towards the synthesis of polymeric materials that possess microporosity that is intrinsic to their molecular structures. These polymers (PIMs) can exhibit analogous behaviour to that of conventional microporous materials, but, in addition, may be processed into convenient forms for use as membranes. The excellent performance of these membranes for gas separation and pervaporation illustrates the unique character of PIMs and suggests immediate technological applications.     

多孔聚合物贮氢材料的研究进展

微孔聚合物由于具有较高的比表面积,因此可用作物理吸附贮氢材料.本文通过比较0.1MPa、77K下自具微孔聚合物、超交联聚合物等多孔聚合物与其它多孔贮氢材料(如碳材料、金属有机网络等)的贮氢性能,阐述了比表面积、孔尺寸及孔形貌、与氢气的作用力等因素对多孔聚合物贮氢量的影响,由于合成超交联聚合物的单体多且孔形貌容易控制,因此超交联聚合物成为具有发展潜力的贮氢聚合物.     

Polymers of intrinsic microporosity (PIMs): organic materials for membrane separations, heterogeneous catalysis and hydrogen storage

This tutorial review describes recent research directed towards the synthesis of polymer-based organic microporous materials termed Polymers of Intrinsic Microporosity (PIMs). PIMs can be prepared either as insoluble networks or soluble polymers with both types giving solids that exhibit analogous behaviour to that of conventional microporous materials such as activated carbons. Soluble PIMs may be processed into thin films for use as highly selective gas separation membranes. Preliminary results also demonstrate the potential of PIMs for heterogeneous catalysis and hydrogen storage.     

Tuning microcavities in thermally rearranged polymer membranes for CO2 capture

Microporous materials have a great importance in catalysis, delivery, storage and separation in terms of their performance and efficiency. Most microporous materials are comprised of inorganic frameworks, while thermally rearranged (TR) polymers are a microporous organic polymer which is tuned to optimize the cavity sizes and distribution for difficult separation applications. The sub-nano sized microcavities are controlled by in situ thermal treatment conditions which have been investigated by positron annihilation lifetime spectroscopy (PALS). The size and relative number of cavities increased from room temperature to 230 °C resulting in improvements in both permeabilities and selectivities for H(2)/CO(2) separation due to the significant increase of gas diffusion and decrease of CO(2) solubility. The highest performance of the well-tuned TR-polymer membrane was 206 Barrer for H(2) permeability and 6.2 of H(2)/CO(2) selectivity, exceeding the polymeric upper bound for gas separation membranes.     

The synthesis of polymers of intrinsic microporosity (PIMs)

Polymers of intrinsic microporosity(PIMs) are a class of porous organic polymer(POP) that form microporous solids due to the inefficient packing of their rigid and contorted macromolecular chains. In contrast to other types of POP, PIMs are not comprised of a network of cross-linked covalent bonds so that they can be dissolved in organic solvents and processed into robust films,coatings or fibres. Here, over twelve years' accumulated research on the synthesis of PIMs is reviewed. To date, three types of polymerisation reaction have been used successfully to prepare PIMs of sufficient molecular mass to form robust self-standing films. These involve the formation of dibenzodioxin, Tr鰃er抯 base and imide linkages between monomeric units. This rapid development of synthetic methods for preparing PIMs has been driven by their rich potential for numerous diverse applications and this synergistic relationship between synthesis and functionality is set to continue.     

Investigation of gas transport and other physical properties in relation to the bromination degree of polymers of intrinsic microporosity

In this work, the synthesis of novel polymers of intrinsic microporosity (PIMs) with different degrees of bromine substitution by a free-radical substitution reaction was performed. The synthesized polymers were thoroughly characterized and their bromination degree was verified via nuclear magnetic resonance. The brominated PIMs were investigated by infrared spectroscopy, X-ray diffraction, and density measurements and correlated with their gas transport properties. It was found that with an increase in the bromination degree, the synthesized PIMs exhibited a significant increase in polymer chain packing density which led to reduced fractional free volume and consequent decrease in gas diffusion and permeability coefficients. The change in permeability coefficients caused an improvement in the CO₂/N₂, CO₂/CH₄, and O₂/N₂ ideal permeability selectivities. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2752–2761     

A Self-Consistent Model for Sorption and Transport in Polyimide-Derived Carbon Molecular Sieve Gas Separation Membranes

Demand for energy-efficient gas separations exists across many industrial processes, and membranes can aid in meeting this demand. Carbon molecular sieve (CMS) membranes show exceptional separation performance and scalable processing attributes attractive for important, similar-sized gas pairs. Herein, we outline a mathematical and physical framework to understand these attributes. This framework shares features with dual-mode transport theory for glassy polymers; however, physical connections to CMS model parameters differ from glassy polymer cases. We present evidence in CMS membranes for a large volume fraction of microporous domains characterized by Langmuir sorption in local equilibrium with a minority continuous phase described by Henry's law sorption. Using this framework, expressions are provided to relate measurable parameters for sorption and transport in CMS materials. We also outline a mechanism for formation of these environments and suggest future model refinements.     

Two‐Dimensional Microporous Material‐based Mixed Matrix Membranes for Gas Separation

Since the discovery of graphene and its derivatives, the development and application of two‐dimensional (2D) materials have attracted enormous attention. 2D microporous materials, such as metal‐organic frameworks (MOFs), covalent organic frameworks (COFs), graphitic carbon nitride (g‐C₃N₄) and so on, hold great potential to be used in gas separation membranes because of their high aspect ratio and homogeneously distributed nanometer pores, which are beneficial for improving gas permeability and selectivity. This review briefly summarizes the recent design and fabrication of 2D microporous materials, as well as their applications in mixed matrix membranes (MMMs) for gas separation. The enhanced separation performances of the membranes and their long‐term stability are also introduced. Challenges and the latest development of newly synthesized 2D microporous materials are finally discussed to foresee the potential opportunities for 2D microporous material‐based MMMs.     

MICROPOROUS INORGANIC MEMBRANES

Recent development in microporous inorganic membranes represents a significant advance in materials for separation and chemical reaction applications. This paper provides an in-depth review of synthesis and properties of two groups (amorphous and crystalline) of microporous inorganic membranes. Amorphous microporous silica membranes can be prepared by the sol-gel and phase separation methods. Flat sheet, tubular and hollow fiber amorphous carbon membranes have been fabricated by various pyrolysis methods from polymer precursors. A large number of synthesis methods have been developed to prepare good quality polycrystalline zeolite membranes. Several techniques, including vapor and liquid approaches, are reviewed for pore structure modification to prepare microporous inorganic membranes from mesoporous inorganic membranes. Chemical, microstructural and permeation properties of these microporous membranes are summarized and compared among the several microporous membranes discussed in this paper. Theory for gas permeation through microporous membranes is also reviewed, with emphasis on comparison of theoretical with the experimental data. These inorganic microporous membranes offer excellent separation properties by the mechanisms of preferential adsorption, selective configurational diffusion or molecular sieving.     

有机微孔聚合物研究进展

有机微孔聚合物(MOPs)是一类新型的多孔材料,具有合成方法多样、化学和物理性质稳定、孔尺寸可调控、表面可修饰等优点。近年来,MOPs在物理吸附储存气体方面表现出巨大潜力,从而在储氢和温室气体封存方面成为研究的热点之一。本文首先介绍了MOPs的结构类型及特点,分别介绍了自具微孔聚合物、超交联聚合物、共价有机网络以及共轭微孔聚合物的最新进展,分析结构与性能间的关系,并对其在催化、分离和气体储存方面的应用做了简单总结。最后对MOPs未来的研究进行了展望。     

Development and evaluation of porous materials for carbon dioxide separation and capture

The development of new microporous materials for adsorption separation processes is a rapidly growing field because of potential applications such as carbon capture and sequestration (CCS) and purification of clean-burning natural gas. In particular, new metal-organic frameworks (MOFs) and other porous coordination polymers are being generated at a rapid and growing pace. Herein, we address the question of how this large number of materials can be quickly evaluated for their practical application in carbon dioxide separation processes. Five adsorbent evaluation criteria from the chemical engineering literature are described and used to assess over 40 MOFs for their potential in CO(2) separation processes for natural gas purification, landfill gas separation, and capture of CO(2) from power-plant flue gas. Comparisons with other materials such as zeolites are made, and the relationships between MOF properties and CO(2) separation potential are investigated from the large data set. In addition, strategies for tailoring and designing MOFs to enhance CO(2) adsorption are briefly reviewed.     

Conjugate polymer-based membranes for gas separation applications: current status and future prospects

Conjugate polymers provide the possibility of exploiting both the chemical and physical attributes of the polymers for membrane-based gas separation. The presence of delocalized π electrons provides high chain stiffness with low packing density, thus making the membrane a rigid structure that favors facilitated transport. Historically, the polymeric membranes were constrained by the tradeoff relationship between gas permeability and gas selectivity. So, different methods were investigated to prepare the membranes that can overcome the limitation. In recent years, electroconductive polymeric membranes have gained attention with their enhanced transportation properties combining the separation behavior depending on both molecular size discrimination as well as the facilitated transport. They offer better selectivity toward polar gases such as CO₂ because of the increased solubility. This review is aimed to provide a literature survey on gas separation using conjugate polymers such as polyaniline, polypyrrole, and some derivatives of polythiophenes. It contains various methods used by different researchers to enhance the gas separation properties of the membranes with improved mechanical and thermal stability such as changing the morphology and membrane preparation methods. In addition, it provides the pros and cons of various factors affecting the conjugate polymer membrane performance. The major challenges and future work that can be done in improving the transportation properties through the membrane to achieve viable membranes are also discussed so that they can be used for commercial and practical applications in the future.     

Gas separation membranes from tailor-made polymers

The development of tailor-made polymers as new gas separation membrane materials has lead to membranes allowing both higher selectivities as well as higher permeabilities. The increased productivity of these new membrane materials is explained in terms of a higher free volume available for gas transport.     

Novel spirobisindanes for use as precursors to polymers of intrinsic microporosity

The synthesis of novel spirobisindane-based monomers for the preparation of polymers of intrinsic microporosity (PIMs) with bulky, rigid substituents is described. Polymers derived from monomers containing spiro-linked fluorene substituents display enhanced solubility and microporosity due to additional frustration of packing in the solid state.     

Highly Conductive Anion‐Exchange Membranes from Microporous Tröger's Base Polymers

The development of polymeric anion‐exchange membranes (AEMs) combining high ion conductivity and long‐term stability is a major challenge for materials chemistry. AEMs with regularly distributed fixed cationic groups, based on the formation of microporous polymers containing the V‐shape rigid Tröger's base units, are reported for the first time. Despite their simple preparation, which involves only two synthetic steps using commercially available precursors, the polymers provide AEMs with exceptional hydroxide conductivity at relatively low ion‐exchange capacity, as well as a high swelling resistance and chemical stability. An unprecedented hydroxide conductivity of 164.4 mS cm^?1 is obtained at a relatively a low ion‐exchange capacity of 0.82 mmol g^?1 under optimal operating conditions. The exceptional anion conductivity appears related to the intrinsic microporosity of the charged polymer matrix, which facilitates rapid anion transport.     

Transport properties of small molecules in zwitterionic polymers

Despite great interests in using zwitterionic polymers for membrane surface modification to enhance antifouling properties, there lacks fundamental understanding of the relationship between polymer structure and water/salt separation properties. In this study, two series of zwitterionic polymers were prepared from sulfobetaine methacrylate and 2‐methacryloyloxyethyl phosphorylcholine. Both are crosslinked by poly(ethylene glycol) diacrylate (PEGDA). These copolymers were thoroughly characterized in terms of sol‐gel fraction, density, glass transition temperature, contact angle, water and salt transport properties, and pure‐gas permeability. Interestingly, the zwitterionic polymers exhibit water sorption and permeability similar to noncharged poly(ethylene glycol)‐based materials. These zwitterionic polymers exhibit lower NaCl diffusivity and permeability and thus higher water/NaCl selectivity than the non‐charged PEG‐based materials at similar water volume fractions, demonstrating their promise for membrane surface modification for desalination and wastewater treatment. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1924–1934     

Molecular-Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by In Situ Polymerization

Commercial ultrafiltration membranes have proliferated globally for water treatment. However, their pore sizes are too large to sieve gases. Conjugated microporous polymers (CMPs) feature well-developed microporosity yet are difficult to be fabricated into membranes. Herein, we report a strategy to prepare molecular-sieving membranes by partitioning the mesoscopic channels in water ultrafiltration membrane (PSU) into ultra-micropores by space-confined polymerization of multi-functionalized rigid building units. Nine CMP@PSU membranes were obtained, and their separation performance for H₂/CO₂, H₂/N₂, and H₂/CH₄ pairs surpass the Robeson upper bound and rival against the best of those reported membranes. Furthermore, highly crosslinked skeletons inside the channels result in the structural robustness and transfer into the excellent aging resistance of the CMP@PSU. This strategy may shed light on the design and fabrication of high-performance polymeric gas separation membranes.     

Concentration-dependent transport of gases and vapors in glassy polymers

The transport of gases and vapors in glassy polymers is analyzed on the basis of the “dual-sorption” model with partial immobilization and the assumption that the diffusion coefficient is an exponential function of concentration. Expressions are derived for the effective (apparent) permeability and diffusion coefficients, as well as for the diffusion timelag. These expressions reduce in limiting cases to forms reported by other investigators. The implications of these results to the separation of gas and vapor mixtures by permeation through glassy polymer membranes are discussed.     

Synthesis,characterization, and gas permeation properties of adamantane‐containing polymers of intrinsic microporosity

A new bis(catechol) monomer, namely, 4,4′‐((1r,3r)‐adamantane‐2,2‐diyl)bis(benzene‐1,2diol) (THADM) was synthesized by condensation of 2‐adamantanone with veratrole followed by demethylation of the formed (1r,3r)‐2,2‐bis(3,4 dimethoxyphenyl)adamantane. Polycondensation of THADM and various compositions of THADM and 5,5,6′,6′‐tetrahydroxy‐3,3,3′,3′‐tetramethylspirobisindane was performed with 2,3,5,6‐tetrafluoroterephthalonitrile (TFTPN) to obtain the homopolymer and copolymers. These polymers demonstrated good solubility in common organic solvents such as dichloromethane, chloroform, and tetrahydrofuran and could be cast into tough films from their chloroform solutions. GPC analysis revealed that number average molecular weights of polymers were in the range 48,100–61,700 g mol⁻¹, suggesting the formation of reasonably high molecular weight polymers. They possessed intrinsic microporosity with Brunauer‐Emmett‐Teller (BET) surface area in the range 703–741 m² g⁻¹. Thermogravimetric analysis of polymers indicated that 10% weight loss temperature was in the range 513–518 °C demonstrating their excellent thermal stability. THADM‐based polymer of intrinsic microporosity (PIM) showed P(CO₂) = 1080, P(O₂) = 232 and appreciable selectivity [α(CO₂/CH₄) = 22.6, α(CO₂/N₂) = 26.7, and α(O₂/N₂)= 5.7]. The gas permeability measurements revealed that with increase in the content of adamantane units in PIMs, selectivity increased and permeability decreased, following the trade‐off relationship. The gas separation properties of PIMs containing adamantane units were located close to 2008 Robeson upper bound for gas pairs such as CO₂/CH₄, CO₂/N₂, H₂/N₂, and O₂/N₂. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 16–24     

Molecular‐Sieving Membrane by Partitioning the Channels in Ultrafiltration Membrane by In Situ Polymerization

Commercial ultrafiltration membranes have proliferated globally for water treatment. However, their pore sizes are too large to sieve gases. Conjugated microporous polymers (CMPs) feature well‐developed microporosity yet are difficult to be fabricated into membranes. Herein, we report a strategy to prepare molecular‐sieving membranes by partitioning the mesoscopic channels in water ultrafiltration membrane (PSU) into ultra‐micropores by space‐confined polymerization of multi‐functionalized rigid building units. Nine CMP@PSU membranes were obtained, and their separation performance for H₂/CO₂, H₂/N₂, and H₂/CH₄ pairs surpass the Robeson upper bound and rival against the best of those reported membranes. Furthermore, highly crosslinked skeletons inside the channels result in the structural robustness and transfer into the excellent aging resistance of the CMP@PSU. This strategy may shed light on the design and fabrication of high‐performance polymeric gas separation membranes.