Sensing mechanism elucidation of a chemosensor based on a metal-organic framework selective to explosive aromatic compounds

Theoretical elucidation of the turn-off mechanism of the luminescence of a chemosensor based on a metal-organic framework (MOF) [Zn₂(OBA)₄(BYP)₂] (BYP: 4,4′-bipyridine; H₂OBA: 4,4′-oxybis[benzoic acid]), selective to nitrobenzene (NB) via quantum chemical computations, is presented. The electronic structure and optical properties of Zn-MOF were investigated through the combination of density functional theory (DFT) and time-dependent DFT methods. Our results indicate that the fluorescence emission is governed by a linker (BPY)-to-linker (OBA) charge transfer (LLCT) involving orbitals π-type. Next, the interaction with the analyte was analyzed, where very interesting results were obtained, that is, the lowest unoccupied molecular orbital is now composed of orbitals from NB, which changes the emissive state of the Zn-MOF. This suggests that the LLCT process is blocked, inducing the fluorescence quenching. Otherwise, the Morokuma-Ziegler energy decomposition and natural orbitals for chemical valence on the Zn-MOF-NB interactions were studied in detail, which illustrate the possible channels of charge transfer between Zn-MOF and NB. Finally, we believe that this proposed methodology can be applied to different chemosensor-analyte systems to evidence the molecular and electronic factors that govern the sensing mechanisms.     

A highly selective and sensitive fluorescent turn-on chemosensor for Al3+ based on a chromone Schiff base

A Schiff-base fluorescent sensor, 7-methoxychromone-3-carbaldehyde-(3′,4′-dimethyl)pyrrole hydrazone (MCPH), was synthesized. The new sensor showed high selectivity for Al³⁺ over other metal ions examined in acetonitrile. Upon binding Al³⁺, a significant fluorescence enhancement with a turn-on ratio over 101-fold was triggered. The detection limit of MCPH for Al³⁺ was 2.5?×?10^?7?mol?L^?1.     

Highly selective and sensitive fluorescent turn-on chemosensor for Al3+ based on a novel photoinduced electron transfer approach

A photoinduced electron transfer (PET)-based chemosensor possessing dual PET processes by simultaneously introducing both nitrogen and sulfur donors was achieved. The fluorescence signal of the free chemosensor is in a normal-off state due to the sulfur donor being insensitive to environmental pH stimuli. As a result, the device can be used over a wide pH span of 3-11. Upon binding Al(3+), a significant fluorescence enhancement with a turn-on ratio over 110-fold was triggered by the inhibition of PET processes from both the sulfur and the nitrogen donors to the fluorophore.     

A novel "turn-on" fluorescent chemosensor for the selective detection of Al3+ based on aggregation-induced emission

A water-soluble, 'turn-on' fluorescent chemosensor based on aggregation-induced emission (AIE) has been developed. It exhibits rapid response, excellent selectivity, and sensitivity to Al(3+).     

A metal–organic gel‐based fluorescent chemosensor for selective Al3+ detection

As an important metal element, aluminium has a significant impact on the environment and human health, and thus the detection of Al³⁺ has become the subject of much research. We synthesized a Ni(II)‐based metal–organic gel (Ni‐MOG), which can serve as an Al³⁺ fluorescence sensor with high selectivity and sensitivity, the limit of detection being calculated to be 0.5 μM. In addition, a composite film was further fabricated by hybridization of this Ni‐MOG with poly(vinyl alcohol). The composite film produced a rapid fluorescence response to Al³⁺ solutions at concentrations above 5 × 10^?5 M in 5 min. The Ni‐MOG composite film can also be successfully applied for the sensitive detection of Al³⁺ in real samples of tap water and seawater. The effective detection of Al³⁺ described in this contribution provides a new insight into water quality monitoring and has promising application value.     

A simple highly sensitive and selective turn-on fluorescent chemosensor for the recognition of Pb2+

A simple highly sensitive and selective turn-on fluorescent chemosensor L based on bis-Schiff-base for Pb²⁺ ions was synthesized and characterized by spectroscopic techniques. L having high binding affinity towards Pb²⁺ ions of 2.10 × 10⁴ M^?1 selectively detects Pb²⁺ ions with almost no interference among various competitive ions by a 11-fold fluorescent enhancement in CH₃CN/H₂O (95:5, v/v) solution over a wide pH range. Moreover, sensor L displayed a lower detection limit of 3.80 × 10^?7 M, which is low enough for sensing sub-millimolar concentration of Pb²⁺ encountered practically.     

Naphthalene-derived Al3+-selective fluorescent chemosensor based on PET and ESIPT in aqueous solution

A simple fluorescent chemosensor HL based on naphthalene with high selectivity and sensitivity towards Al³⁺ over other commonly coexisting metal cations in fully aqueous solution to enhance the potential applications of the fluorescent chemosensor was developed. HL exhibited a significant fluorescence enhancement at 475?nm in the presence of Al³⁺ over other competitive metal ions with a low detection limit of 0.43?μM due to the inhibition of the photo induced electron transfer (PET) and the excited-state intramolecular proton transfer (ESIPT). The 1:1 binding stoichiometry between HL and Al³⁺ was corroborated by the Job plot and the ESI-MS spectrum. Importantly, the reversible recognition process of HL to Al³⁺ will make HL could be used circularly and repeatedly in practical applications by addition of Na₂EDTA. In addition, the binding behavior and sensing mechanism of HL to Al³⁺ were illustrated in detail by the ¹H NMR titration experiment.     

一种基于三苯胺类共轭聚合物荧光信号开启的汞离子检测方法

通过Suzuki反应合成出主链中含9,9-二(4-二苯胺基苯基)-3,6-芴的蓝光共轭聚合物—聚[2,7-(9,9-二辛基芴)-co-3,6-(9,9-二三苯胺基芴)] (36PFT).36PFT可特异地与I-相互作用,并淬灭36PFT的荧光.当I-的浓度为0.24 mmol/L时,36PFT的荧光淬灭程度可达95％,...     

A fluorescent PET chemosensor for Zn2+ cations based on 4-methoxy-1,8-naphthalimide derivative containing salicylideneamino receptor group

1. Download : Download high-res image (78KB)
2. Download : Download full-size image

     

A new quinoline-based chemosensor in ratiometric sensing of Hg2+ ions

A new quinoline-based chemosensor 1 has been designed and synthesised. Its metal ion-binding properties have been documented in organic and aqueous organic solvents. While chemosensor 1 recognises Hg²⁺ ions (K _a = 2.15 × 10⁴ M^? 1) by exhibiting ratiometric change in emission in CHCl₃/CH₃OH (1:1, v/v), under similar condition both Zn²⁺ and Cd²⁺ ions are sensed by significant non-ratiometric increase in emission with measurable red shift. In DMSO/H₂O (5:95, v/v), the sensor 1 exhibits a greater selectivity towards Hg²⁺ ions (K _a = 9.20 × 10³ M^? 1) over the other metal ions examined.     

Bimodal fluorescence signaling based on control of the excited-state conformational twisting and the ground-state protonation processes

Amino-based fluoroionophores 1 and 2 can selectively sense alkaline earth metal ions in MeCN under both neutral and acidic conditions by different signaling mechanisms. The fluoroionophoric behavior for the neutral probes is characterized by an ‘off-on’ photoinduced electron transfer (PET)-like fluorescence intensity response due to a switching from a twisted internal charge transfer (TICT) to a planar internal charge transfer (PICT) state. For the protonated probes (i.e., 1/H⁺ and 2/H⁺), the fluorescing species is the localized stilbene fluorophores, but dual fluorescence is induced upon metal-ion recognition through a deprotonation process.     

Fluorescence turn-on chemosensor for Hg<Superscript>2+</Superscript> based on a rhodamine derivative and its application in bioimaging

A fluorescence turn-on chemosensor based on rhodamine B derivative (FD10) has been developed as a highly sensitive chemosensor for Hg²⁺. A prominent fluorescence enhancement was measured in the presence of Hg²⁺, which was in agreement with the changes in the absorption spectrum. Furthermore, by means of laser scanning fluorescence microscopy experiments, it was demonstrated that FD10 was cell-permeable and could be used as a fluorescent probe for monitoring Hg²⁺ in living cells. Supported by the National Natural Science Foundation of China (Grant No. 20801015) and Shanghai Leading Academic Discipline Project (Grant No. B108)     

A new Schiff-base as fluorescent chemosensor for selective detection of Cr3+: An experimental and theoretical study

A novel Schiff base fluorescent sensor N,N′-bis(salicylidene)-2,6-bis(4-aminophenyl)-4-phenylpyridine (P3) was synthesized through condensation of 2,6-bis(4-aminophenyl)-4-phenylpyridine and 2-hydroxybenzaldehyde. The obtained results from fluorescence analysis revealed that by excess of Cr³⁺ to P3, a remarkable increase was observed in the fluorescent intensity of the Schiff base at 663?nm with the ratio of CH₃CN/H₂O (95/5%), even though the other cations would likely have no impact on the fluorescence intensity. The cause of this trend might be ascribed to the formation of a 1:1 stoichiometric P3-Cr³⁺ complex, confirmed by Job's plot, which is resulted in preventing the photo-induced electron transfer (PET) process. From fluorescence titration, the association constant K_a was gained 2.28?×?10⁵?M^?1 and the limit of detection (LOD) was determined to be 1.3?×?10^?7?M. Furthermore, the optimized structure together with the electronic spectra of the proposed complex was determined by DFT and TDDFT calculations.     

A novel sensitive turn-on fluorescent Zn2+ chemosensor based on an easy to prepare C3-symmetric Schiff-base derivative in 100% aqueous solution

A C(3)-symmetric Schiff-base example of the new simple, low cost, highly water soluble, and sensitive turn-on fluorescent Zn(2+) chemosensor is described. The sensor was successfully applied to the detection of intracellular Zn(2+). Moreover, the sensor could also serve as a potential recyclable component in sensing materials. Notably, the color change is so obvious that all of the recycling process can be seen clearly by the naked eye.     

Investigation on sensing mechanism of a fluorescent probe for TNP detection in aqueous solution

In this paper, the synthesis and spectral properties of a fluorescent probe Nph-An for TNP detection has been introduced and its sensing mechanism has been studied with density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods. For TNP detection in aqueous solution the probe shows high sensitivity, selectivity and efficiency. The theoretical results demonstrate that the excited-state intermolecular hydrogen bonding (HB) plays an important role for the TNP detection. In the excited state, the intermolecular HB between Nph-An and TNP is strengthened, and thus strongly facilitates the nonirradiative PET process to induce the fluorescence quenching. Whereas, the probe Nph-An emits strong fluorescence because of the intramolecular charge transfer (ICT) properties, which is confirmed by the solvatochromism effect. The calculated absorption spectra of Nph-An and Nph-An + TNP agree well with the experimental values and theoretical analysis provides a detailed and clear explanation of the sensing mechanism.     

A dual-function chemosensor based on coumarin for fluorescent turn-on recognition of Hg2+ and colorimetric detection of Cu2+ in aqueous media

A novel coumarin derivative CTT was synthesized via the condensation of 7-(N,N-diethylamino) coumarin-3-aldehyde with 5-amino-1,3,4-thiadiazole-2-thiol and its structure was characterized using infrared spectroscopy (IR), ¹H NMR, mass spectrometry (MS) techniques, and elemental analysis. The recognition properties of CTT with metal ions were investigated in CH₃CN–H₂O (v/v = 1/1) solution using UV–vis absorption and fluorescence emission spectrum method. The results showed that CTT could monitor Cu²⁺ and Hg²⁺ simultaneously as a dual-function chemosensor in CH₃CN–H₂O (v/v = 1/1). CTT could be used to detect Cu²⁺ colorimetrically; when using CTT, a color change from yellowish-brown to yellowish-green could be readily observed by the naked eye. CTT showed turn-on fluorescent recognition of Hg²⁺, the fluorescence enhancement was attributed to the inhibited C=N isomerization and the obstructed excited state intramolecular proton transfer (ESIPT) of CTT. The recognition mechanism of CTT for Cu²⁺ and Hg²⁺ was studied by experiments and theoretical calculations, respectively. Therefore, CTT has the ability to be a “single chemosensor for dual targets.”     

A colorimetric and ratiometric fluorescent chemosensor based on furan-pyrene for selective and sensitive sensing Al3+

A new pyrene derivative BF bearing a furan group was synthesized via a one-step reaction as a colorimetric and ratiometric chemosensor for Al³⁺in ethanol-H₂O (9:1,v/v,pH 7.2,HEPES buffer) solution.This chemosensor could selectively recognize Al³⁺ in the presence of other competing ions.Low limit of detection (LOD) and high association constant revealed its superior sensitivity and binding affinity toward Al³⁺.Besides,the probe BF performed perfectly in a reversibility test using EDTA.The mechanism of the interaction has been confirmed by ¹H NMR titration.Importantly,chemosensor BF has also been utilized to detect Al³⁺ on test paper strips,which showed its potential for practical applications.     

Design of a dual-signaling sensing system for fluorescent ratiometric detection of Al3+ ion based on the inner-filter effect

A dual-signal sensing system based on the inner-filter effect (IFE) was demonstrated, in which the combination of two signaling mechanisms allows metal binding to turn on two fluorescence emission bands, independently. A proof-of-concept fluorescent ratiometric assay for Al(3+) in pure aqueous solution is presented. The proposed assay is based on the Al(3+)-induced color and fluorescence changes of Alizarin red S (ARS) and IFE between ARS and meso-tetra(N-methyl-4-pyridyl)porphine tetratosylate salt (TMPyP). In the absence of Al(3+), the absorption spectrum of the ARS in 0.2 M HAc-NaAc buffer (pH 5.5) has a strong peak at 420 nm, significantly overlapping with the excitation of TMPyP. ARS is expected to be capable of functioning as a powerful absorber to tune the emission of TMPyP on account of the spectral overlap. Binding of Al(3+) with ARS forms a fluorometric ARS/Al(3+) complex and shifts the maximum absorbance from 420 nm to 480 nm, which overlaps negligibly with the excitation of TMPyP and turns on the proper emission spectrum for TMPyP. Under the optimum conditions, The fluorescence intensity ratio, F(585)/F(651), responds to Al(3+) over a dynamic range of 0.1-1.5 μM, with a limit of detection of 40 nM, where F(585) and F(651) are the fluorescence intensity at 585 nm and 651 nm in the absence or presence of Al(3+), respectively. Further application in Al(3+)-spiked water samples suggested a recovery between 95 and 108%. The fluorescence response is highly selective for Al(3+) over other metal ions with the addition of thiourea as the masking agent.     

An AIE and ESIPT active Schiff base as colorimetric probe of Fe3+ and turn-on fluorescent probe of Al3+: Experimental and theoretical studies

In this present study, a simple cation chemoprobe 1 bearing naphthol OH and imine group was designed and synthesized, which was identified as an aggregation induced emission (AIE) active molecule with excited state intramolecular proton transfer (ESIPT) features. In addition, 1 showed both colorimetric detection for Fe³⁺ and turn-on fluorescence response for Al³⁺. The binding ratio of 1 to Fe³⁺ and Al³⁺ were determined both to be 1:1 via Job’s plot and ESI-mass spectrometry analysis. The limit of detection (LOD) of probe 1 to Fe³⁺ and Al³⁺ were 0.10 and 0.43 μM, respectively. Moreover, probe 1 could be used to quantify Fe³⁺ and Al³⁺ in environmental water samples.     

Selective sensing of Zn(II) ion by a simple anthracene-based tripodal chemosensor

A new and an easy-to-make simple tripodal shaped chemosensor 1, comprising an anthracene moiety as a fluorophore and amide, alcohol functionalities as ligating groups has been designed and synthesized for Zn(II). In CH₃CN containing 0.1% DMSO, upon excitation at 370 nm, the chemosensor 1 exhibited an emission at 412 nm, which increased to a large extent upon complexation of Zn(II). Among the other metal ions examined in the study, Cd²⁺ moderately perturbed the emission of 1 under similar conditions.