Naphthalic anhydride derivatives: Structural effects on their initiating abilities in radical and/or cationic photopolymerizations under visible light

Only one naphthalic anhydride derivative has been reported as light sensitive photoinitiator, this prompted us to further explore the possibility to prepare a new family of photoinitiators based on this scaffold. Therefore, eight naphthalic Naphthalic anhydride derivatives (ANH1‐ANH8) have been prepared and combined with an iodonium salt (and optionally N‐vinylcarbazole) or an amine (and optionally 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine) to initiate the cationic polymerization of epoxides and the free radical polymerization of acrylates under different irradiation sources, that is, very soft halogen lamp (～ 12 mW cm^?2), laser diode at 405 nm (～1.5 mW cm^?2) or blue LED centered at 455 nm (80 mW cm^?2). The ANH6 based photoinitiating systems are particularly efficient for the cationic and the radical photopolymerizations, and even better than that of the well‐known camphorquinone based systems. The photochemical mechanisms associated with the chemical structure/photopolymerization efficiency relationships are studied by steady state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin‐trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2860–2866     

Synthesis and evaluation as a visible‐light polymerization photoinitiator of a new dye‐linked bis(trichloromethyl)‐1,3,5‐triazine

A dye‐linked initiator consisting of a merocyanine dye, which has an absorption maximum at 460 nm, and a substituted bis(trichloromethyl)‐1,3,5‐triazine initiator was prepared in order to achieve an efficient photopolymerization in a visible‐light region. The spectroscopic studies clearly showed that the dye‐linked initiator exhibit a marked increase in the efficiency of fluorescence quenching than a simple mixture of the dye/initiator. These results are reasonably explained in terms of the efficiency of electron transfer between the dye and the initiator. The relative photoinitiating efficiency of dye‐linked initiators in photopolymerization of acrylate monomers was evaluated and the results clearly indicated that the dye‐linked photoinitiator exhibited a marked increase in the photoinitiating efficiency of photopolymerization of acrylates compared to a simple mixture of the dye/initiator in photopolymer coatings particularly at a lower concentration of the initiator. This was explained in terms of the active quenching sphere of the dye/initiator system. Superior photosensitivity in the linked compound at a lower concentration indicates that this would be particularly useful as a visible‐light photoinitiator in holographic‐recording photopolymers. Copyright © 2004 John Wiley & Sons, Ltd.     

Visible light induced free radical promoted cationic polymerization using thioxanthone derivatives

The free radical promoted cationic polymerization cyclohexene oxide (CHO), was achieved by visible light irradiation (λ_inc = 430–490 nm) of methylene chloride solutions containing thioxanthone‐fluorene carboxylic acid (TX‐FLCOOH) or thioxanthone‐carbazole (TX‐C) and cationic salts, such as diphenyliodonium hexafluorophosphate (Ph₂I⁺PF) or silver hexafluorophosphate (Ag⁺PF) in the presence of hydrogen donors. A feasible initiation mechanism involves the photogeneration of ketyl radicals by hydrogen abstraction in the first step. Subsequent oxidation of ketyl radicals by the oxidizing salts yields Bronsted acids capable of initiating the polymerization of CHO. In agreement with the proposed mechanism, the polymerization was completely inhibited by 2,2,6,6‐tetramethylpiperidinyl‐1‐oxy and di‐2,6‐di‐tert‐butylpyridine as radical and acid scavengers, respectively. Additionally polymerization efficiency was directly related to the reduction potential of the cationic salts, that is, Ag⁺PF (E = +0.8 V) was found to be more efficient than Ph₂I⁺PF (E = ?0.2 V). In addition to CHO, vinyl monomers such as isobutyl vinyl ether and N‐vinyl carbazole, and a bisepoxide such as 3,4‐epoxycyclohexyl‐3′,4′‐epoxycyclohexene carboxylate, were polymerized in the presence of TX‐FLCOOH or TX‐C and iodonium salt with high efficiency. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Benzoin type photoinitiator for free radical polymerization

Benzoin, a popular photoinitiator for free radical polymerization of vinyl monomers, was improved by introduction of two methyl thioether substituents. This new benzoin derivative showed an about 50 times higher light absorption in the near‐UV spectral region and performed better than the unsubstituted benzoin in polymerization experiments in bulk solutions or films of acrylate monomers when low initiator concentrations are used. Laser flash photolysis, low temperature luminescence experiments and photoproduct studies by mass spectrometry suggest that a slow α‐cleavage mechanism (k_α = 2.2 × 10⁵ s^?1) from the electronic triplet state with a quantum yield of 0.1 is the primary photoreaction to generate the initiating free radicals. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Naphthalimide‐phthalimide derivative based photoinitiating systems for polymerization reactions under blue lights

Naphthalimide‐phthalimide derivatives (NDPDs) have been synthesized and combined with an iodonium salt, N‐vinylcarbazole, amine or 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine to produce reactive species (i.e., radicals and cations). These generated reactive species are capable of initiating the cationic polymerization of epoxides and/or the radical polymerization of acrylates upon exposure to very soft polychromatic visible lights or blue lights. Compared with the well‐known camphorquinone based systems used as references, the novel NDPD based combinations employed here demonstrate clearly higher efficiencies for the cationic polymerization of epoxides under air as well as the radical polymerization of acrylates. Remarkably, one of the NDPDs (i.e., NDPD2) based systems is characterized by an outstanding reactivity. The structure/reactivity/efficiency relationships of the investigated NDPDs were studied by fluorescence, cyclic voltammetry, laser flash photolysis, electron spin resonance spin trapping, and steady state photolysis techniques. The key parameters for their reactivity are provided. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 665–674     

Visible light photopolymerization of nitro‐stilbenzene photosensitive initiating systems

In this paper, we presented four novel visible light photoinitiating systems, which employed nitro‐stilbenzene derivatives as photoinitiators. Visible light photopolymerization of these systems was studied completely. The results showed that the chemical structures of the photoinitiators, photoinduced electron transfer approach, solvent polarity, and monomers played significant effects on the visible light photopolymerization. The electrochemistry of nitro‐stilbenzene was dramatically influenced by the linking benzophenone moiety. The cyclic voltammograms of four photoinitiators were determined and discussed. We further estimated the thermodriving force for electron transfer between nitro‐stilbenzene and benzophenone. Thermal stabilities of new photoinitators were determined by the analysis of differential scanning calorimetry (DSC) and thermogravimetry (TG) in this paper. Copyright © 2009 John Wiley & Sons, Ltd.     

Azahelicenes as visible light photoinitiators for cationic and radical polymerization: Preparation of photoluminescent polymers and use in high performance LED projector 3D printing resins

In this article, novel azahelicenes (AZs) were synthesized and proposed as high performance visible light photoinitiators for both the free radical polymerization of acrylates and the cationic polymerization (CP) of epoxides upon visible light exposure using Light Emitting Diodes (LEDs) @405, @455, and @470 nm. Excellent polymerization initiating abilities are found and high final conversions were obtained. Remarkably, an exceptional long lifetime photoluminescence property of the polymer films was observed when synthesized in presence of AZs. A full picture of the involved chemical mechanisms is given. AZs being high performance photoinitiators, their use in new cationic LED 3D printing resins will be also presented, that is, the cationic process upon LED projector @405 nm can be useful to reduce the shrinkage usually observed for radical polymerization. LED projector printing is very interesting compared to laser writing as this technology projects the profile of an entire layer of a 3D object at one time. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55, 1189–1199     

Thioxanthone–carbazole as a visible light photoinitiator for free radical polymerization

A thioxanthone (TX) derivative with the additional carbazole chromophore, namely thioxanthone‐carbazole (TX‐C) was synthesized and characterized. The photophysical properties and its efficiency to polymerize methyl methacrylate both in the presence and absence of N,N‐dimethylaniline (DMA) as coinitiator was investigated and compared with that of the commercially available TX. TX‐C was found to display better photophysical properties and in both cases initiate polymerization more efficiently. Detailed real‐time Fourier transform infrared studies revealed that high polymerization rates can be obtained when TX‐C in conjunction with DMA was used. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Polymerization of styrene by photoexcited safranine T without additives

Styrene can be photopolymerized with methanolic solutions of safranine T(STH⁺) in the absence of any additives. Under these conditions the monomer acts as an electron donor for the excited singlet state of STH⁺, and after electron transfer an initiating semireduced STH⁺ radical is produced. The experimentally determined monomer exponent of α = 2 indicates additional deactivation reactions of the primary radicals. The polymerization rate depends on the dye concentration also in those regions, in which all light is already absorbed. Presumably, this dependence is caused by a comproportionation reaction between STH⁺ and substituted leuco-safranine T formed in the course of polymerization. © 1993 John Wiley & Sons, Inc.     

Synthesis of main chain polymeric benzophenone photoinitiator via thiol‐ene click chemistry and Its use in free radical polymerization

Main chain polymeric benzophenone photoinitiator (PBP) was synthesized by using “Thiol‐ene Click Chemistry” and characterized with ¹H NMR, FTIR, UV, and phosphorescence spectroscopies. PBP as a polymeric photoinitiator presented excellent absorption properties (ε₂₉₄ = 28,300 mol^?1L^?1cm^?1) compared to the molecular initiator BP (ε₂₅₂ = 16,600 mol^?1L^?1cm^?1). The triplet energy of PBP was obtained from the phosphorescence measurement in 2‐methyl tetrahydrofurane at 77 K as 298.3 kJ/mol and according to phosphorescence lifetime, the lowest triplet state of PBP has an n‐π* nature. Triplet–triplet absorption spectrum of PBP at 550 nm following laser excitation (355 nm) were recorded and triplet lifetime of PBP was found as 250 ns. The photoinitiation efficiency of PBP was determined for the polymerization of Hexanedioldiacrylate (HDDA) with PBP and BP in the presence of a coinitiator namely, N‐methyldiethanolamine (MDEA) by Photo‐DSC. The initiation efficiency of PBP for polymerization of HDDA is much higher than for the formulation consisting of BP. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

A benzophenone‐naphthalimide derivative as versatile photoinitiator of polymerization under near UV and visible lights

A benzophenone‐naphthalimide derivative (BPND) bearing tertiary amine groups has been developed as a high‐performance photoinitiator in combination with 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine or an iodonium salt for both the free radical polymerization (FRP) of acrylates and the cationic polymerization (CP) of epoxides upon exposure to near UV and visible LEDs (385–470 nm). BPND can even produce radicals without any added hydrogen donor. The photochemical mechanisms are studied by molecular orbital calculations, steady state photolysis, electron spin resonance spin trapping, fluorescence, cyclic voltammetry and laser flash photolysis techniques. These novel BPND based photoinitiating systems exhibit an efficiency higher than that of the well‐known camphorquinone‐based systems (FRP and CP) or comparable to that of bis(2,4,6‐trimethylbenzoyl)‐phenylphosphineoxide (FRP at λ ≤ 455 nm). © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 445–451     

Effective Utilization of NIR Wavelengths for Photo‐Controlled Polymerization: Penetration Through Thick Barriers and Parallel Solar Syntheses

This contribution details an efficient and controlled photopolymerization regulated by far‐red (λ=680 nm) and NIR (λ=780 and 850 nm) light in the presence of aluminium phthalocyanine and aluminium naphthalocyanine. Initiating radicals are generated by photosensitization of peroxides affording an effective strategy that provides controlled polymerization of a variety of monomers with excellent living characteristics. Critically, long wavelength irradiation provides penetration through thick barriers, affording unprecedented rates of controlled polymerization that can open new and exciting applications. Furthermore, a more optimized approach to performing solar syntheses is presented. By combining the narrow Q‐bands of these photocatalysts with others possessing complementary absorptions, layered, independent polymerizations and organic transformations may be performed in parallel under a single broadband emission source, such as sunlight.     

Optimal irradiation wavelength in iniferter‐based photocontrolled radical polymerization

In iniferter‐based photocontrolled radical polymerization optimal irradiation wavelength was examined for precise molecular design of star vectors, which can function as high‐performance gene carriers. Monochromatic light in the range from 330 to 400 nm with the interval of about 10 nm was irradiated to tetrafunctional iniferter, 1,2,4,5‐tetrakis(N,N‐diethyldithiocarbamylmethyl)benzene, in the presence of N,N‐dimethyaminopropylacrylamide (DMAPAAm), as a model monomer, in toluene. In all wavelengths tetrabranched polymers were produced except for 400‐nm‐irradiation. The highest conversion reaching to about 35% was observed at the wavelength of 370 nm after only 40 min of irradiation. There was no further increase in conversion by combination with another two wavelengths. HPLC analysis and NMR spectra showed that the polymerization at the optimal wavelength of 370 nm was occurred in a living manner with the ability to control the chain length (from about 5000 to 40,000) having very narrow polydispersity (about 1.6) by changing of the irradiation time, the intensity, and the monomer concentration. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4505–4512, 2008     

Free‐radical‐promoted cationic photopolymerization under visible light in aerated media: New and highly efficient silane‐containing initiating systems

New systems for the visible‐light‐induced polymerization of cationic resins working through a free‐radical‐promoted process are presented. They are based on a photoinitiator (camphorquinone, isopropylthioxanthone, Eosin), a silane, and a diphenyl iodonium salt, the new compound being the silane. The overall efficiency is strongly affected by the silane structure. The rates of polymerization and final percent conversion are noticeably higher than those obtained in the presence of already studied reference systems. Moreover, contrary to previously investigated free‐radical‐promoted cationic polymerizations, oxygen does not inhibit the process and an unusual enhancement of the polymerization kinetics is found in aerated conditions: such an observation seems to have never been reported so far. The excited state processes and the role of oxygen as revealed by laser flash photolysis are discussed. The particular behavior of the silyl radicals is outlined. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2008–2014, 2008     

Well‐controlled RAFT polymerization initiated by recyclable surface‐modified Nb(OH)5 nanoparticles under visible light irradiation

A recyclable solid‐state photoinitiator based on the surface modified niobium hydroxide is prepared and successfully introduces into reversible addition–fragmentation chain transfer (RAFT) polymerization under visible light illumination. It is revealed by gel permeation chromatography analysis that well‐defined polymers with controlled molecular weight and narrow polydispersity index can be achieved when the feed ratio of photoinitiator to the RAFT agent was controlled properly. It is also found that the polymerization is highly responsive to external stimulus and when light is removed from the system polymerization stops almost immediately. In addition, the photoinitiator can be recycled and reused to initiate the polymerization for many times without significant decrease of initiation efficiency. At last, the mechanism for the light initiated polymerization is proposed to illuminate how the initiation and chain propagation proceed. This facile, green and visible light initiation methodology could attract more and more applications in polymer science with the depletion of fossil energy. A recyclable solid‐state photoinitiator based on the surface modified niobium hydroxide was prepared and successfully introduced into reversible addition–fragmentation chain transfer (RAFT) polymerization under visible light illumination. It is revealed that well‐defined polymers with controlled molecular weight and narrow polydispersity index (PDI) can be achieved when the feed ratio of photoinitiator to the RAFT agent was controlled properly. It is also found that the polymerization is highly responsive to light initiation. In addition, the photoinitiator can be recycled and reused to initiate the polymerization for many times without significant decrease of initiation efficiency. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2715–2724     

Copper and iron complexes as visible‐light‐sensitive photoinitiators of polymerization

The utilization of visible lights for the fabrication of polymeric materials is recognized as a promising and environmentally friendly approach. This process relies on the photochemical generation of reactive species (e.g., radicals, radical cations, or cations) from well‐designed photoinitiators (PIs) or photoinitiating systems (PISs) to initiate the polymerization reactions of different monomers (acrylates, methacrylates, epoxides, and vinyl ethers). In spite of the fact that metal complexes such as ruthenium‐ or iridium‐based complexes have found applications in organic and polymer synthesis, the search of other low‐cost metal‐based complexes as PISs is emerging and attracting increasing attentions. Particularly, the concept of the photoredox catalysis has appeared recently as a unique tool for polymer synthesis upon soft conditions (use of light emitting diodes and household lamp). This highlight focuses on recently designed copper and iron complexes as PI catalysts in the application of photoinduced polymerizations (radical, cationic, interpenetrated polymer networks, and thiol‐ene) or controlled radical polymerization under visible light irradiation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2673–2684     

Blue LED light‐sensitive benzo pyrazolo (or imidazo) isoquinolinone derivatives in high‐performance photoinitiating systems for polymerization reactions

Isoquinolinone derivatives (IQ) have been synthesized and combined with different additives (an amine, 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine, an iodonium salt, or N‐vinylcarbazole) to produce reactive species (i.e. radicals and cations) being able to initiate the radical polymerization of acrylates, the cationic polymerization of epoxides, the thiol‐ene polymerization of trifunctional thiol/divinylether, and the synthesis of epoxide/acrylate interpenetrated polymer network IPN upon exposure to very soft polychromatic visible lights, blue laser diode or blue LED lights. Compared with the use of camphorquinone based systems, the novel combinations employed here ensures higher monomer conversions (～50–60% vs. ～15–35%) and better polymerization rates in radical polymerization. The chemical mechanisms are studied by steady‐state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin trapping techniques. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 567–575     

Naphthodioxinone‐1,3‐benzodioxole as photochemically masked one‐component type II photoinitiator for free radical polymerization

A 1,3‐benzodioxole derivative of naphthodioxinone, namely 2‐(benzo[d][1,3]dioxol‐5‐yl)‐9‐hydroxy‐2‐phenyl‐4H‐naphtho[2,3‐d][1,3]dioxin‐4‐one was synthesized and characterized. Its capability to act as caged one‐component Type II photoinitiator for free radical polymerization was examined. Upon irradiation, this photoinitiator releases 5‐benzoyl‐1,3‐benzodioxole possessing both benzophenone and 1,3‐dioxole groups in the structure as light absorbing and hydrogen donating sites, respectively. Subsequent photoexcitation of the benzophenone chromophore followed by hydrogen abstraction generates radicals capable of initiating free radical polymerization of appropriate monomers. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012