Positron annihilation lifetime study of PTFE/silica composites

Positron annihilation lifetime spectroscopy (PALS) was used to study the microstructure of PTFE/silica composites. The positron lifetimes (τ_n) and intensities (I_n) of PTFE and the composites (30-62% silica) were measured at room temperature as a function of specimen thickness. Four lifetime components were found in PTFE and the composites. The longer lifetime components, τ₃ = 1.4 ns and τ₄ = 4.4 - 4.1 ns, were interpreted to be due to the presence of two different sized free volume cavity distributions within the PTFE/silica composites. A strong silica concentration dependence was found in the bulk intensities (I_3b and I_4b). The I_3b value increased from 13.0% in PTFE to 28.2% in the 62% composite, while the I_4b value decreased from 17.5% in PTFE to 4.5% in the 62% composite. The smaller-void size, free volume fraction (τ₃I_3b) values increased linearly between 0 and 100% silica concentration, while the larger void size, free volume fraction (τ₄I_4b) values decreased nonlinearly with silica concentration. Since silica has a long lifetime component (τ₃ = 1.6 ns), this behavior is ascribed to silica particles occupying the large free volume cavities (370 ų) in the PTFE/silica composites. © 1996 John Wiley & Sons, Inc.     

Positron annihilation lifetime studies of changes in free volume on cross-linking cis-polyisoprene,high-vinyl polybutadiene,and their miscible blends

Measurements of average free volume hole sizes, 〈v_f〉, and the fractional free volumes, f_ps, in vulcanized cis-polyisoprene (CPI), high-vinyl polybutadiene (HVBD), and their 50 : 50 blend were made via determination of orthopositronium annihilation lifetimes. The results are compared to corresponding data on the uncured materials. On crosslinking, 〈v_f〉 decreases in the rubbery state but remains essentially unchanged in the glass. This is consistent with the expectation that the crosslinks greatly restrict the thermal expansion of the chains above the glass transition temperature (T_g) but have less influence on the packing density in the glass. Scaling relationships between 〈v_f〉, f_ps, the thermal expansion coefficient α_f = df_ps/dt, and T_g are examined. We find that 〈v_f〉_g, the hole volume at T_g, and f_ps,g, the fractional free volume at T_g, each increase significantly with increasing T_g. This behavior is consistent with previous observations reported in the literature and has been interpreted as a manifestation of the kinetic character of the glass transition. High-T_g polymers need a larger free volume to pass into the liquid state. The change in expansion coefficient on passing from the glass to the liquid, Δα_f = α_f,l − α_f,g, increases slowly with T_g, as predicted by free volume theory. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2754–2770, 1999     

Positron annihilation lifetime studies of free volume in a polymer electrolyte PEO complexed with NH4I

Positron lifetime spectroscopy has been applied to study the temperature dependence of free-volume properties in a solvent-free polymer–salt complex polyethylene oxide (PEO) doped with ammonium iodide (NH₄I, with NH ≈ 0.076) in the temperature range of 298–353 K. The observed lifetime spectra were resolved into three components and the longest lifetime, τ₃, was associated with the pick-off annihilation of ortho-positronium (o-Ps) trapped by the free volume. The lifetime component, τ₃, and its intensity, I₃, both showed a significant variation with temperature, which followed a different course in the heating and cooling cycle. Changes in the temperature coefficient of τ₃ and I₃ were observed at T ≈ 328 K, the melting point of the sample. This behaviour is correlated to the temperature variation of the electrical conductivity. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 969–976, 1998     

Analysis of swelling process of protein by positron annihilation lifetime spectroscopy and differential scanning calorimetry

The change in the nanoscopic structure and bound state of water in the protein gel were investigated using positron annihilation lifetime spectroscopy (PALS) and differential scanning calorimetry (DSC). Gelatin was used as a protein. To examine the bound state of water in gelatin gel, the amount of freezing and nonfreezing water in gelatin gels were evaluated by fusion enthalpy of DSC curves. Below water content of 40% (w/w), the whole amount of water was nonfreezing water, whereas above water content of 40% (w/w), the amount of freezing water increased according to increase in water content. To investigate the nanoscopic spatial structure under coexistence of polymer and water, positron annihilation lifetime measurement was performed. The lifetime of o‐Ps or the pore size increased according to increase in water content, particularly below the water content of 40% (w/w). When the water penetrates into the gelatin network, the water molecules form hydrogen bonds with hydrophilic groups inside the helical structure in gelatin gel. The water molecules inside the helical structure expand the structure outward, leading to increase in pore size. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2031–2037, 2007.     

Positron annihilation spectroscopy study of moisture absorption in protective epoxy coatings

Position annihilation spectroscopy (PAS) was used to measure the relative free-volume fraction of protective epoxy coatings before and after exposure to liquid water at room temperature. The relative free volume fraction determined before water exposure was compared to the equilibrium water uptake of each coating and a correlation was found. The relative free-volume fraction of the epoxy coatings decreased slightly after water exposure. This decrease is contrary to the free volume theory of plasticization, but is consistent with the antiplasticization process. Larger decreases in the relative free volume fraction were sought by repeating the water uptake experiments with nitrobenzene which in the bulk, liquid form quenches ortho-positronium (o-Ps). Since the o-Ps lifetime remained approximately constant and the o-Ps intensity decreased after nitrobenzene absorption, nitrcbenzene is believed to be inhibiting the formation of o-Ps in the epoxy free volume cavities. Larger decreases in the relative free volume fractions were found after nitrobenzene exposure than after water exposure. These larger decreases are due to the fact that nitrobenzene is a better inhibitor of o-Ps formation than water in the epoxy free volume cavities. Larger volume fractions of nitrobenzene were absorbed by the coatings than water and were interpreted to be due to interactions between nitrobenzene and the epoxies. © 1993 John Wiley & Sons, Inc.     

Positron annihilation lifetime measurements of mechanically fatigued polystyrene samples

Early stages of cyclic fatigue‐loaded polystyrene (PS) specimens were investigated by positron annihilation lifetime spectroscopy (PALS) at a maximum stress amplitude of 15 MPa. PALS yields information about the average unoccupied hole volume. A linear increase in the ortho‐positronium (o‐Ps) lifetime was observed in a range from 0 to 50,000 cycles. This increase occurs homogeneously distributed at different positions along a sample of 170 mm. The average unoccupied void volume increases by 1.2%. On the other hand, the o‐Ps intensity shows no systematic change upon cycling. The results suggest a homogeneous and linear increase in free volume prior to craze formation. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1991–1995, 2008     

Positron annihilation spectroscopy studies of implanted polymer membranes

Two different polymer membranes, polyethylene and Nafion, have been sequentially implanted under vacuum at room temperature with 90 keV copper ions up to 10¹⁷ ions/cm²; after each implantation step, the targets were subjected to analysis with Positron annihilation lifetime spectroscopy and coincidence Doppler broadening spectroscopy. Both membranes revealed a similar behavior regarding the high fluence superficial implantation, but with different degree of magnitude. In order to endorse the Positrons annihilation spectroscopy results, scanning electron microscopy coupled with energy‐dispersive energy has been performed on the same targets, despite its lower sensitivity.     

Characterization of poly(silylenemethylene)s by positron annihilation lifetime spectroscopy. I.

Amorphous and crystalline poly(silylenemethylene)s with the repeating PhRSiCH₂ (R : Me or Ph) units were characterized by positron annihilation lifetime spectroscopy (PALS) to gain insights into the molecular motions of these polymers. The temperature dependence of the ortho-positronium lifetime (τ₃) and intensity (I₃) was examined from 50 to 470 K for each sample. The glass transition temperature of each polymer was easily distinguished by a change in the slope of τ₃ spectrum. Both polymers exhibited a steep drop of I₃ at 130–140 K being probably assignable to the transition arising from the motions of phenyl groups, which was almost undetectable by means of differential scanning calorimetry or dynamic mechanical analysis. Several other transitions of these polymers detected by PALS are also discussed. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 755–761, 1998     

Effect of thermal history on the free volume properties of semi‐crystalline poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) membranes by positron annihilation lifetime spectroscopy

Free volume properties of a series of poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) membranes, which were produced by various nonisothermal crystallization processes (rapid‐, step‐, and slow‐cooling processes), were investigated using positron annihilation lifetime (PAL) spectroscopy over a temperature range of 25–90 °C. From the annihilation lifetime parameters, the temperature dependence of free volume size, amount, size distribution, and fractional free volume and thermal expansion properties of free volume were discussed. A model which assumed that amorphous phase was subdivided into mobile and rigid amorphous fractions (MAF and RAF) in the semicrystalline polymer was considered to interpret the temperature dependence of those free volume properties. Morphological observation of the semicrystalline polymer by small‐angle X‐ray scattering (SAXS) indicated that the rapid‐cooled (cold‐crystallized) membranes showed a much thinner thickness of the repeating lamellar/amorphous layers and most likely higher amount of RAF, which restrained the chain motion, than the step‐ and slow‐cooled (melt‐crystallized) membranes. The difference of free volume properties among various PHBV membranes was created according to the crystalline structure of the polymer from different thermal history. The polymer crystallized with slower cooling rate induced higher crystallinity and resulted in less free volume amount and lower fractional free volume. In addition, the thermal expansion coefficients of free volume size were affected by the crystallization rate of PHBV polymer. Larger distribution of the free volume size of melt‐crystallized membranes was observed as a result of the bimodal distribution of the lamellar periodicity and less amount of RAF than that of the cold‐crystallized membranes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 855–865, 2009     

Positron lifetime spectroscopy in ordered nanoporous polymers

Positron annihilation lifetime spectroscopy (PALS) is a common technique used to characterize the porosity of polymers. Here, we expand its use to the study of ordered nanoporous polymer monoliths. Polystyrene (PS) monoliths with aligned cylindrical pores ranging in diameters from 15 to 35 nm were examined. Such large pores push the boundaries of the PALS technique. To achieve robust measurement, our system used larger detectors than those typically used for monolithic polymer samples. This was done to improve data rates while sacrificing timing resolution. Pore sizes determined using PALS were consistent with measurements made using small angle x‐ray scattering. In addition, PALS was able to detect the collapse of the pores when the monolithic sample was heated above the T_g of PS. Because PALS measurements are not sensitive to the nature of the order within the structure nor are they, sensitive to the open or closed nature of the pores this technique could be expanded to a variety of other sample types. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1157–1161     

Molecular weight-dependence of free volume in polystyrene studied by positron annihilation measurements

Positron annihilation lifetime measurements are reported for four monodisperse polystyrenes with molar mass M = 4,000, 9,200, 25,000, and 400,000. The temperature dependences of orthopositronium (o-Ps) lifetime (τ₃) and intensity (I₃) were measured from 5°C to T_g + 30°C for each sample. From these data, the free volume hole size, 〈v_f(τ₃)〉, and fractional free volume h_ps=CI₃〈v_f(τ₃)〉 were calculated. The temperature dependences of τ₃, 〈v_f(τ₃)〉 and h_ps show a discrete change in slope at an effective glass transition temperature, T_g,ps, which is measurably below the conventional bulk T_g. This suggests that τ₃ is sensitive to large holes which retain their liquid-like mobility in the glassy state. Good agreement was found for T > h_g,ps between h_ps and the theoretical free volume fraction h_th deduced from experimental P-V-T data for polystyrene using the statistical mechanical theory of Simha and Somcynsky. Below T_g,ps, deviations between h_ps and h_th are observed, h_ps falling increasingly below h_th as temperature decreases. Whereas h_ps and h_th depend strongly on M in the melt, each essentially independent of M in the glass. A free volume quantity, computed from the bulk volume, which is in good numerical agreement with the Simha-Somcynsky h-function in the melt, gives improved agreement with h_ps in the glassy state. © 1994 John Wiley & Sons, Inc.     

Correlations between gas permeation and free-volume hole properties probed by positron annihilation spectroscopy

Free-volume hole sizes, fractions, and distributions in a series of polycarbonate-based polymers are measured by using positron annihilation lifetime (PAL) spectroscopy. Correlations between the obtained free-volume hole properties and gas diffusion coefficients are observed. © 1995 John Wiley & Sons, Inc.     

Constraints and thermal expansion of the free volume in a micro‐phase separated poly(ester‐adipate)urethane

The free volume behavior of a thermoplastic polyesterurethane (TPU) versus temperature is investigated by positron annihilation lifetime spectroscopy and dilatometry. A discrepancy with the free volume predicted by the lattice‐hole theory is found. The agreement is restored by assuming anisotropic expansion of the free volume holes, which in fact results in expansion mainly in two dimensions. This finding is perfectly compatible with a polymer structure based on rheological, thermal, and TEM data which envisage TPU as formed by short soft segments limited in their movements by chain connectivity and confined by physical crosslinks due to the hard segments. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2104–2109     

Study of free volume in high-vinyl polybutadiene/cis-polyisoprene blends using positron annihilation spectroscopy

High-Vinyl Polybutadiene (HVBD)/cis-Polyisoprene (CPI) blends were characterized by Differential Scanning Calorimetry (DSC) and Positron Annihilation Lifetime Spectroscopy (PALS). A single DSC glass transition temperature T_g is observed, whose composition dependence strongly deviates from additivity, and shows an apparent cusp when the weight fraction of HVBD ≈ 0.75. The free-volume hole size, V_h, and the scaled fractional free volume, h_ps/C, = I₃V_h were determined by PALS from the orthopositronium (o-Ps) intensities, I₃, and lifetimes, τ₃, over a temperature range encompassing T_g and the temperature at which “positronium bubble” formation occurs. In the glass, V_h and h_ps/C are smaller for CPI than for HVBD, but the thermal expansion coefficient for hole volume, α_f, is larger in the melt for CPI than for HVBD; thus, an iso-hole volume temperature occurs in these blends at T_iso ≈ −34°C. Above and below T_iso, V_h and h_ps/C each show a negative departure from additivity. A quantitative interpretation of the cusp in the composition dependence of T_g can be obtained, via a modified analysis of Kovacs, using free-volume quantities from PALS, with the ratio of scaling constants C_CPI/C_HVBD as an adjustable parameter. At high temperatures, the positron bubble size is smaller in CPI than in HVBD. This agrees with the observation that the thermal expansivity of hole volume, and, hence the internal pressure are larger in the equilibrium melt of CPI. The effect of e⁺-irradiation on the o-Ps intensity was investigated. I₃ decreases more rapidly in the melt as T → T_g, and then more slowly in the glass, suggesting that the effect is due to trapping of radical or ionic species which inhibit o-Ps formation. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 861–871, 1998     

Subnanometer hole properties of CO2-exposed polysulfone studied by positron annihilation lifetime spectroscopy

Positron annihilation lifetime (PAL) spectroscopy has been employed to study subnanometer hole properties in polysulfone (PSF). In this study, hole properties of size, fraction, and distribution of PSF exposed to CO₂ are reported. In the PSF/CO₂ system, the hole size and fraction significantly increase and the free-volume distribution broadens as a function of CO₂ pressure in the range of 0–1000 psi. Hysteresis in hole properties is observed during CO₂ sorption/desorption cycle. The high sensitivity of PAL results due to CO₂ exposure in PSF is explained in terms of the microstructural changes in the polymer matrix, i.e., filling penetrant and plasticization, gas hydrostatic pressure effect, and creation of free volumes and holes. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 3049–3056, 1998     

Probing the microstructure of Nafion-117 using positron annihilation spectroscopy

We report a new result on positron annihilation studies in acid- and cation-neutralized (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺, UO₂²⁺, Ni²⁺) Nafion membranes using positron lifetime and Doppler-broadened annihilation radiation (DBAR) measurements. The free-volume structure is characterized using a simple quantum mechanical model of positronium (Ps) in a spherical well. Our studies indicate that formation and expansion of clusters is always associated with a change in free-volume structure resulting in smaller free-volume holes. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 771–776, 1997     

Effect of physical aging of poly(1‐trimethylsilyl‐1‐propyne) films synthesized with TaCl5 and NbCl5 on gas permeability,fractional free volume,and positron annihilation lifetime spectroscopy parameters

The effect of physical aging on the gas permeability, fractional free volume (FFV), and positron annihilation lifetime spectroscopy (PALS) parameters of dense, isotropic poly(1‐trimethylsilyl‐1‐propyne) (PTMSP) films synthesized with TaCl₅ and NbCl₅ was characterized. As‐cast films were soaked in methanol until an equilibrium amount of methanol was absorbed by the polymer. When the films were removed from methanol, film thickness initially decreased rapidly and was almost constant after 70 h in air for both catalysts. This timescale was much longer than the timescale for complete methanol desorption (ca. 5 h). From the film‐thickness data, the reduction in FFV with time was estimated. For samples prepared with either catalyst, the kinetics of FFV reduction were well‐described by a simple model based on the notion either that free‐volume elements diffuse to the surface of the polymer film and are subsequently eliminated from the sample or that lattice contraction controls polymer densification. Methane permeability decreased rapidly during the first 70 h, which was the same timescale for the thickness change. The decrease in methane permeability was smaller in films prepared with NbCl₅ than with TaCl₅. The logarithm of methane permeability decreased linearly as reciprocal FFV increased, in accordance with free‐volume theory. The PALS results indicate that the concentration of larger free‐volume elements (as indicated by the intensity I₄) decreased with aging time and that the other PALS parameters were not strongly influenced by aging. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1222–1239, 2000     

Investigations of (PVA)0.7(NaBr)0.3(H2SO4)xM solid acid polymer electrolyte using positron annihilation lifetime spectroscopy

The free‐volumes of solid polymer electrolytes (SPE) were characterized using positron annihilation lifetime (PAL) spectroscopy, FTIR, and scanning electron microscope (SEM) techniques. The SPE based on poly(vinyl alcohol) (PVA) and sodium bromide (NaBr) complexed with sulfuric acid (SA) H₂SO₄ at different weight percent ratios were prepared using solution cast technique. The PAL results indicate that a higher SA content (more than 0.87 mol/L) in (PVA)_0.7(NaBr)_0.3 matrix increase the free‐volume hole size from 58 ų to 87 ų. The increase in the SPE free‐volume with higher SA content was associated with a decrease in the SPE crystallinity. It is postulated that the incorporated SA interrupt polymeric chain packing and retard crystallization during electrolyte films formation. The FTIR spectral studies indicate that the SA content higher than 0.87 mol/L induces chemical modifications within the PVA, which results in chain scission. The PAL study shows that the chain scissions within the polymer matrix affect the free volume hole density (I₃) and hence the microstructure. I₃ was found to be decreased from ?11 to ?6 %, resulting in lower fractional free‐volume holes in the SPE films. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 2038–2044, 2010     

Gas permeation and positron annihilation lifetime spectroscopy of poly(ether imides) containing main chain ethylene oxide segments

This article reports a study of four poly(ether imide)s with varying ethylene oxide (EO) segments lengths using positron annihilation lifetimes spectroscopy, wide angle X‐ray diffraction, and gas transport measurements. The measured properties change with the length of the EO segment. Comparison of the poly(ether imide) containing a single ether linkage with those containing one and three EO units, show progressive changes of the permeability and diffusion coefficient with void size. However, when six EO units are incorporated into the polymer backbone certain of the observed trends are reversed. Incorporation of flexible EO segments in the polymer backbone allows changes in the chain–chain interactions which increases the packing density and changes the void size and influences the solubility coefficients leading to variation of the gas transport characteristics. Differences in the measured solubility parameters reflect the extent to which the gases molecules are able to interact with the polymer matrix. The highest values obtained for the gas separation for carbon dioxide and nitrogen is observed when EO has a value of three. Further increasing of the length of the EO segments in the poly(ether imide) leads to a reduction the gas transport properties and hence the extent to which gas separation would be achieved. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1654–1662