Swelling kinetics and release characteristic of crosslinked chitosan: Polyether polymer network (semi-IPN) hydrogels

The aqueous swelling kinetics of a series of crosslinked chitosan (cr-CS) with glutaraldehyde (GA) interpenetrating polyether hydrogels have been studied as functions of pH, the N-deacetylation degree of chitosan, the amount of crosslinking agent, the electrolyte composition in solution, temperature, and gel composition. Based on these results, the swelling mechanism of the hydrogels was discussed. The release profiles of chlorhexidini acetas from the semi-IPN were also investigated. © 1994 John Wiley & Sons, Inc.     

Effects of intercalated hydrotalcite on drug release behavior for poly(acrylic acid-co-N-isopropyl acrylamide)/intercalated hydrotalcite hydrogels

The influence of positively charged intercalated hydrotalcite (IHT) in the anionic poly(acrylic acid-co-N-isopropyl acrylamide), poly(AA-co-NIPAAm)/hydrotalcite nanocomposite hydrogels on the drug release behavior for the drugs with different charges was investigated in this study. Results show that the loading amount and release ratio of indomethacin are affected by the swelling ratio in saline solution and related to the affinity in the alcohol solution, respectively. The loading amount and release ratio of caffeine are affected by the swelling ratio. The loading amount of crystal violet (CV) increased with an increase of the content of intercalating agent in IHT of the gel but the fractional release of CV in the gels decreases with increase in intercalating agent content. The result of release and loading for phenol red in the hydrogels is contrary to CV.     

Optimization of inulinase production by Kluyveromyces marxianus using factorial design

Factorial design and response surface techniques were used to optimize the culture medium for the production of inulinase by Kluyveromyces marxianus. Sucrose was used as the carbon source instead of inulin. Initially, a fractional factorial design (2^5–1) was used in order to determine the most relevant variables for enzyme production. Five parameters were studied (sucrose, peptone, yeast extract, pH, and K₂HPO₄), and all were shown to be significant. Sucrose concentration and pH had negative effects on inulinase production, whereas peptone, yeast extract, and K₂HPO₄ had positive ones. The pH was shown to be the most significant variable and should be preferentially maintained at 3.5. According to the results from the first factorial design, sucrose, peptone, and yeast extract concentrations were selected to be utilized in a full factorial design. The optimum conditions for a higher enzymatic activity were then determined: 14 g/L of sucrose, 10 g/L of yeast extract, 20 g/L of peptone, 1 g/L of K₂HPO₄. The enzymatic activity in the culture conditions was 127 U/mL, about six times higher than before the optimization.     

Development of temperature-responsive semi-IPN hydrogels from PVA-PNVC-PAm for controlled release of anti-cancer agent

A series of semi-interpenetrating polymeric network (semi-IPN) hydrogels were synthesized using poly(vinyl alcohol) (PVA), monomers N-vinylcaprolactam (NVC) acrylamide (Am), and cross-linker bis[2-methacryloyloxy] ethyl phosphate (BMEP). The hydrogels were synthesized by using free-radical polymerization using ammonium persulphate (APS) as an initiator at 60°C. The hydrogels were characterized by various techniques such as Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and scanning electron microscopy (SEM) to confirm the formation, crystallinity, and morphological behavior. The swelling behavior at various temperatures and pH conditions showed that the semi-IPN hydrogels were good candidates for temperature-responsive nature. 5-Flurouracil (FU), a model anticancer drug, was successfully encapsulated and the encapsulation efficiency was found in range of 50–74% for different hydrogels. Further, in-vitro release studies were performed to investigate the release mechanism. The cumulative release studies showed that the developed hydrogels are potentially efficient for the gastrointestinal drug delivery of FU.     

Controlled release of drug via tuning electrospun polymer carrier

Medicated‐fibers have been obtained through electrospinning after rifampin was dissolved in poly (lactic acid)/chloroform solution. The relationship between polymer variables [such as concentration, molecular weight (M_w), and introducing hydrophilic block] and drug release from the electrospun fibers is disclosed. The results show that polymeric concentration and M_w are crucial for producing the medicated fibers, which influence not only the morphology of the medicated‐fiber but also drug release rate from fiber. At the same M_w, the drug release rate decreases with the increase of spinning concentration. At two different M_w blends, drug release behaviors change. When the low M_w content is in a dominant position, drug release rate depends largely on mixing ratio of two M_w contents; on the other hand, drug release rate is also dependent on concentration of spinning fluid. In addition, the block copolymer [poly‐L ‐lactic acid (PLLA)‐polyethylene glycol‐PLLA] shows faster release rate as compared to homopolymer (PLLA). © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Synthesis and characterization of novel carboxymethyl chitosan grafted polylactide hydrogels for controlled drug delivery

Novel carboxymethyl chitosan‐polylactide (CMCS‐g‐PLA) hydrogels were prepared by using 1‐(3‐dimethylaminopropyl)‐3‐ethylcarbodiimide hydrochloride/N‐hydroxysuccinimide (EDC/NHS) as crosslinking agent and catalyst at room temperature. Solid‐state ¹³C‐NMR, SEM, and FT‐IR measurements showed that PLA blocks are successfully grafted onto the CMCS main chains. DSC measurements confirmed the effective crosslinking of carboxymethyl chitosan. With increasing the amount of EDC/NHS, the crosslink destiny of CMCS‐g‐PLA copolymers is improved. The swelling ratio of CMCS‐g‐PLA hydrogels is pH dependent, showing a minimum in the pH range of 3 to 5. Rheological studies confirmed the formation of hydrogels. The higher the crosslinking density, the higher the storage modulus of hydrogels. CMCS‐g‐PLA hydrogels only slightly degrade in PBS for 10 days. In the presence of lysozyme, however, hydrogels with low crosslink density are totally degraded in 10 days. Drug release studies show that after 96 h, 95% of thymopentin is released under in vitro conditions. Copyright © 2015 John Wiley & Sons, Ltd.     

Controlled release of anti-diabetic drug metformin hydrochloride from cellulose/PEG/poly (SA) ter-polymeric hydrogels

In the present work, cellulose pulp, obtained from a paper industry, has been dissolved in PEG/NaOH system and the resulting solution has been polymerized in the presence of monomer sodium acrylate (SA) and crosslinker N, N’ methylene bisacrylamide (MB) via free radical polymerization. These gels have been loaded with anti-diabetic drug Metformin Hydrochloride (Met) and a detailed investigation of release of drug has been studied. Various kinetic models have been applied on the release data. Finally, the in-vivo study has been carried out on albino Wistar rats to see the efficacy of these hydrogel systems in lowering the glucose level.     

Impact of supramolecular interactions on swelling and release behavior of UPy functionalized HEMA‐based hydrogels

Supramolecular polymeric hydrogels based on copolymers of 2‐hydroxyethyl methacrylate (HEMA) and HEMA functionalized with ureidopyrimidinone (quadruple H‐bonding motifs and HU comonomer) were prepared at different HU comonomer ratios (PH‐Sn, n = HU mol%). For comparison, HEMA homopolymers (PH‐Cn, n = mol% of a chemical cross‐linker) were synthesized. In contrast to PH‐S0, PH‐Sn copolymers act like cross‐linked hydrogels and absorb large amounts of water while retaining shape. Viscosities of the hydrogels decreased, and elastic and loss moduli increased with increasing HU content. Compression modulus of the swollen PH‐Sn hydrogels increased with HU content and varied between 54 and 240 kPa. Study of metronidazole loading/release behaviors of PH‐S6 hydrogel against PH‐C6 revealed a negligible burst effect for the former and a sustained release that continued for about 120 hours. We conclude that modification of poly(2‐hydroxyethyl methacrylate) with HU through urethane linkages is an effective strategy to developing physical hydrogels with predictable behavior for biomedical applications.     

Design of a rate- and time-programming drug release device using a hydrogel: pulsatile drug release from κ-carrageenan hydrogel device by surface erosion of the hydrogel

We have found that a repetitive pulsatile drug release with a certain time interval is observed from a monolithic hydrogel device by surface erosion of the hydrogel. As a model system of pulsatile drug release, dibucaine hydrochloride and κ-carrageenan hydrogel were chosen as a drug and a device, respectively. Electrostatic interactions between dibucaine hydrochloride and κ-carrageenan polymer segments are strong, since dibucaine hydrochloride is positively charged and each disaccharide repeating unit of κ-carrageenan chains has one sulfate group. Dibucaine hydrochloride was loaded into the hydrogel by immersing dry κ-carrageenan hydrogel disks in a dibucaine hydrochloride solution for 24 h. The pulsed release of dibucaine hydrochloride from the device was observed every 50 min between 30 and 250 min after the release starts. The weight of κ-carrageenan hydrogel decreases in an oscillatory manner with time in distilled water. The oscillatory changes observed in the hydrogel weight in distilled water are considered to be caused by influx and efflux of water molecules into and from the surface and core of the hydrogel and by polymer liberation from the hydrogel. This phenomenon was well explained by our kinetic model [Colloids and Surfaces B 8 (1996) 93–100]. The time interval between pulses observed in drug release coincides with that observed in the oscillatory weight change of the hydrogel. From these, it was concluded that the pulsatile release of dibucaine hydrochloride from the device was caused by the pulsatile liberation of swollen κ-carrageenan hydrogel from the surface of the device.     

Superabsorbent hydrogels based on cellulose for smart swelling and controllable delivery

Novel superabsorbent hydrogels were prepared successfully from carboxymethylcellulose sodium (CMC) and cellulose in the NaOH/urea aqueous system by using epichlorohydrin (ECH) as cross-linker. The structure and morphology of the hydrogels were characterized by FT-IR spectroscope, thermogravimetric analysis and scanning electron microscope. The results revealed that the CMC contributed to the enhanced size of pore, whereas cellulose as a strong backbone in the hydrogel to support it for keeping its appearance. Their equilibrium swelling ratio in distilled water and different physiological fluids were evaluated, indicating the maximum swelling ratio in water reached an exciting level of 1000 as the hydrogels still keeping a steady appearance. Moreover, the hydrogels exhibited smart swelling and shrinking in NaCl or CaCl₂ aqueous solution, as well as the release behavior of bovine serum albumin (BSA) that could be controlled by changing CMC content. The cellulose-based hydrogels are promising for the applications in the biomaterials area.     

Hybrid cross‐linked hydrogels as a technology platform for in vitro release of cephradine

Hydrogel‐based drug delivery systems can leverage therapeutically favorable upshots of drug release and found clinical uses. Hydrogels offer temporal and spatial control over the release of different therapeutic agents. Because of their tailor made controllable degradability, physical properties, and ability to prevent the labile drugs from degradation, hydrogels provide platform on which diverse physicochemical interactions with entrapped drugs cause to control drug release. Herein, we report the fabrication of novel vinyltrimethoxy silane (VTMS) cross‐linked chitosan/polyvinyl pyrrolidone hydrogels. Swelling in distilled water in conjunction with different buffer and electrolyte solutions was performed to assess the swellability of hydrogels. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and X‐ray diffraction (XRD) analysis were further conducted to investigate the possible interactions between components, thermal stability, and crystallinity of as‐prepared hybrid hydrogels, respectively. In vitro time‐dependent biodegradability, antimicrobial study, and cytotoxicity were also carried out to evaluate their extensive biocompatibility and cytotoxic behavior. More interestingly, in vitro drug release study allowed for the controlled release of cephradine. Therefore, this facile strategy developed the novel biocompatible and biodegradable hybrid hydrogels, which could significantly expand the scope of these hydrogels in other biomedical applications like scaffolds, skin regeneration, tissue engineering, etc.     

Preparation and properties of redox responsive modified hyaluronic acid hydrogels for drug release

A series of oxidized hyaluronic acid (oxi‐HA)/3,3′‐dithiobis (propionohydrazide) (DTP) redox responsive hydrogels by Schiff base reaction under physiological conditions were designed and prepared. The influence of the concentration of oxi‐HA and DTP on rheological properties, equilibrium swelling ratio, and degradation rate were investigated. All oxi‐HA/DTP hydrogels exhibited good rheological properties, high equilibrium swelling ratio, low degradation rate, and sustainable drug release properties, and the comprehensive performance of oxi‐HA5/DTP6 hydrogel was better than that of others. The redox responsiveness was evaluated by means of degradation and in vitro bovine serum albumin release behavior investigation with the stimulus of different concentration of dithiothreitol as reducing agent. The intelligent hydrogels could be potentially applied in the fields of drug delivery system, tissue engineering, or cell scaffold materials. Copyright © 2017 John Wiley & Sons, Ltd.     

Physicochemical characterization and drug release properties of PDMAEMA/OSA Semi‐IPN hydrogels with microporous structure

A new poly(2‐(dimethylamino) ethyl methacrylate)/oxidized sodium alginate (PDMAEMA) semi‐interpenetrating network (Semi‐IPN) hydrogel with microporous structure was prepared by using PDMAEMA microgels as an additive during the polymerization/crosslinking process. The interior morphology characterized by scanning electron microscopy showed the Semi‐IPN hydrogels have different pore sizes by changing the amount of microgels. The hydrogels were also characterized by using Fourier transform infrared and DSC. The swelling behaviors of hydrogels indicated that the hydrogels have excellent pH and temperature sensitivity. Bovine serum albumin was entrapped in the hydrogels and the in vitro drug release profiles were established in different buffer solutions at various temperatures. The release behaviors of the model drug were dependent on the pore size of the hydrogels and environmental temperature/pH, which suggested that these materials have potential application as intelligent drug carriers. Copyright © 2011 John Wiley & Sons, Ltd.     

Chitosan based hybrid hydrogels for drug delivery: Preparation,biodegradation, thermal,and mechanical properties

In the present paper, biodegradable hybrid hydrogels were prepared by using chitosan as a natural polymer and polyurethane containing azomethine as a synthetic polymer for the drug delivery application for 5-fluorouracil. The fabricated hydrogels were characterized via FT-IR and SEM analysis. Besides, the thermal, mechanical, and wettability properties, water uptake, biodegradation, protein absorption, drug loading, and release behaviors of the hybrid hydrogels were studied. The obtained results indicated that the fabricated hybrid hydrogels have exhibited good mechanical, hydrophilic, water uptake, and biodegradation behaviors. The hybrid hydrogels also showed 50% drug release amounts and they could be a good candidate for the controlled delivery of 5-FU due to these properties.     

Hydrophilic polymer drug from a derivative of salicylic acid: synthesis, controlled release studies and biological behavior

Hydrophilic polymeric drugs bearing "Triflusal" (4-trifluoromethylsalicylic acid), a drug widely used as antithrombogenic agent (Disgren), have been prepared by free radical copolymerization of methacryloyloxyethyl [2-(acetyloxy)-4-(trifluoromethyl)] benzoate (HTRF) and N,N'-dimethylacrylamide (DMA). The reactivity ratios of both monomers have been determined by 1H NMR spectra by applying non-linear least square treatments to the copolymerization equation (terminal model), and the kinetic parameters obtained indicated that the microstructure of copolymer chains is homogeneous, with a random distribution of the active HTRF units along the copolymer chains. That means that for the copolymer system THDMA22 used in this work, HTRF units are mainly isolated in relatively long DMA sequences. Therefore, in this structure the intramolecular interactions between adjacent HTRF units are negligible. Release of Triflusal from THDMA22 has been studied in vitro using buffered solutions at pH = 2, 7.4 and 10 and 37 degrees C. The system showed an interesting pseudo-zero order release profile at pH = 7.4 during several months. It has been also evaluated the pharmacological activity and the behavior of the system in contact with biological media. In this sense, we have carried out some in vitro studies about the antiaggregant properties and biocompatibility of THDMA22. Results demonstrate that this copolymer inhibits platelet aggregation in its macromolecular form and presents a good biocompatibility with Human Osteoblastic Cells (HOS).     

Synthesis and characterization of poly(ethylene glycol)‐based thermo‐responsive polyurethane hydrogels for controlled drug release

The thermo‐responsiveness, swelling and mechanical properties of a series of novel poly(ester‐ether urethane) hydrogels have been investigated. These thermo‐sensitive hydrogels were obtained by combining hydrophobic biodegradable poly(ε‐caprolactone) diols and hydrophilic two‐, three‐ and four‐arm hydroxyl terminated poly(ethylene glycol) (PEG) of various molecular weights, using hexamethylene diisocyanate, dichloroethane as solvent and a tin‐based catalyst. The use of multifunctional PEGs leads to the formation of covalent crosslinking points allowing an additional control of the swelling capability. Thus, it was found that tuning the hydrophilic/hydrophobic balance and the crosslinking degree by changing the composition, the swelling and the thermo‐responsive behavior of these hydrogels could be modulated. The obtained hydrogels showed a volume transition at around room temperature. Therefore, and taking into account their biocompatibility, these hydrogels show promising properties for biomedical applications, such as drug delivery. Thus, the loading and release of diltiazem hydrochloride, an antihypertensive drug used as model, were investigated. These new PEG polyurethane hydrogels were able to incorporate a high amount of drug providing a sustained release after an initial burst effect. Copyright © 2013 John Wiley & Sons, Ltd.     

Self‐assembled graphene oxide–gelatin nanocomposite hydrogels: Characterization,formation mechanisms,and pH‐sensitive drug release behavior

Novel physically crosslinked graphene oxide (GO)‐gelatin nanocomposite hydrogels were obtained by self‐assembly. The hydrogels with various ratios of GO to gelatin were prepared, and characterized by X‐ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, and scanning electron microscopy. The static and dynamic rheological properties of the hydrogels were investigated, along with the underlying hydrogel formation mechanisms. The storage modulus of the hydrogels (containing 98–98.5 wt % water) reached 114.5 kPa, owing to the relatively strong physical bonding (i.e., hydrogen bonding and electrostatic forces) between GO and gelatin. Drug release tests showed that the drug release from the hydrogel was pH‐dependent, with 96% of the model drug released in a neutral environment, compared to 28% released in an acidic medium. These hydrogels could have potential in pH‐sensitive drug delivery. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 356–367     

Slow release of wound healing drug from hydrogel wound dressing prepared by radiation crosslinking method

The hydrogel wound dressing was prepared by radiation crosslinking. It was used of on patients in the Navy 411 Hospital and some other hospitals. From sixty case studies of the clinical effects, the results showed that: 1. drug releasing slowly releives the pain effectively for prolonged period of application; 2. The dressing can reduce the oozing liquid from the wound and make the wound heal faster; 3. The number of the dressing change is greatly reduced. All the data indicates that the dressing is superior to the conventional kinds.     

Surface modification by deposition of IPA plasma and gellan gum/chitosan hybrid hydrogel onto thermoplastic polyurethane for controlled release of N‐acetylcysteine

A thin film system composed of gellan gum and chitosan was fabricated through a combination of polyelectrolyte blend and hybrid hydrogel gelation for controlled release of drug. In this study, precursor isopropyl alcohol (IPA) was used to plasma deposit on the surface of thermoplastic polyurethane (TPU) to form a hydrophilic film. The features of the thin film were evaluated using water contact angle (WCA) measurement, scanning electron microscopy (SEM), Fourier transform infra‐red (FTIR), UV/Vis spectroscopy, and studies of controlled release of drugs. The hybrid hydrogel, pH‐sensitive, was tested at pH values of 1.2 and 7.4 of buffer solution and at a temperature of 37°C to observe its swelling ratio and drug delivery properties with N‐acetylcysteine as a drug material for controlled release. Furthermore, at pH 7.4, the hybrid hydrogel has an outstanding release ratio of up to about 90% absorption amounts of N‐acetylcysteine after 8 hr. The mechanism of drug release from thin film devices (n = 0.684) is anomalous (non‐Fickian) transport, the value of n lies between 0.43 and 0.85.     

PVA/P(AA-AM)水凝胶的制备及药物控制释放性能研究

以聚乙烯醇(PVA)、丙烯酸(AA)和丙烯酰胺(AM)为单体,过硫酸铵(APS)为引发剂、N,N'-亚甲基双丙烯酰胺(MBA)为交联剂,通过化学引发聚合制备互穿水凝胶PVA/P(AA-AM);用红外光谱(IR)、热重分析(TG)、差示扫描量热法(DSC)及扫描电镜(SEM)等测试方法对其进行了表征,并对其溶胀性能、p H敏感性以及离子强度对溶胀性能的影响进行了研究;并考察了该凝胶分别在p H=6.86和p H=1.80介质中对药物异烟肼和烟酸的控制释放行为。结果表明,PVA/P(AA-AM)水凝胶具有良好的p H、离子强度敏感性,在两种介质中异烟肼的累积释放率均高于烟酸,但异烟肼在p H=1.80的介质中的释放速度和累积释放率均高于其在p H=6.86的介质,烟酸则结果恰好相反。所以这种水凝胶有望用作靶向药物释放的载体。