Radical Polymerization of methacrylates with an adamantane‐like rigid core derived from naturally occurring myo‐inositol

Trimethacrylate and dimethacrylate with rigid adamantane‐like cores were synthesized from myo‐inositol orthoester, and their radical homopolymerization and copolymerization with methyl methacrylate (MMA) were investigated. The radical homopolymerization of trimethacrylate yielded a networked polymer with higher thermal stability than that of a networked polymer synthesized by radical homopolymerization of 1,3,5‐cyclohexanetriol‐derived trimethacrylate, demonstrating the effect of adamantane‐like core rigidity on the increase in thermal stability. Further, dimethacrylate underwent cyclopolymerization, forming a macrocyclic structure in the repeating unit, as the two methacrylate groups were oriented axially from the rigid orthoester‐core and thus located close to each other. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2411–2420     

Radical polymerizations of two stereoisomeric trimethacrylates with rigid adamantane‐like cores from naturally occurring myo‐inositol

Two stereoisomeric trimethacrylates, T1 and T2 , which share a common adamantane‐like rigid core, were synthesized from naturally occurring myo‐inositol, and their radical polymerization behaviors were investigated. For the synthesis of T1 , myo‐inositol was converted to triol 1 , bearing one equatorial hydroxyl group and two axial hydroxyl groups, by orthoesterification, which was used as a precursor. For the synthesis of T2 , 1 was converted to triol 2 , bearing three axial hydroxyl groups, which was used as a precursor. Investigations on the radical polymerization of T1 and T2 , which potentially accompanies the cyclopolymerization of the axially oriented methacrylate moieties, revealed significant differences between the two. (1) The polymerization of T1 affords networked and thus insoluble polymers PT1 , while that of T2 affords less crosslinked and thus soluble polymers PT2 . (2) The amount of residual methacrylate moieties was larger in PT2 than in PT1 . (3) PT2 had higher thermal stability than PT1 , though PT2 contained a larger amount of unreacted methacrylate moieties. These tendencies were successfully correlated with the difference in cyclopolymerization efficiency between the polymerizations of the two monomers. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1743–1748     

Synthesis of partially bio-based triepoxides from naturally occurring myo-inositol and their polyadditions

Partially bio-based triepoxides, 1,3,5-tri-O-methyl-2,4,6-tri-O-(oxiran-2-yl-methyl)-myo-inositol ( 4 ) and 2,4,6-tri-O-(oxiran-2-yl-methyl)-myo-inositol 1,3,5-orthoacetate ( 5 ), were synthesized from naturally occurring myo-inositol. These two triepoxides differ from each other in terms of rigidity of the core structure; while the former triepoxide has a more flexible cyclohexane core, the latter has a highly rigid adamantane-like orthoester core. Triepoxide 5 readily reacted with nucleophilic monomers such as diamines, dithiol, and trithiol to yield networked polymers. The glass transition temperatures (T_gs) of these polymers were higher than those of comparable networked polymers obtained by the polyaddition of triepoxide 4 with the same nucleophilic monomers, implying that the rigidity of the orthoester moiety contributed to the efficient restriction of the polymer chain in the synthesized networked polymers.     

Poly(methyl methacrylate) copolymers containing multiple,pendent plasticizing groups

New ether dimer (ED‐Eh) and diester (EHDE) derivatives of α‐(hydroxymethyl)acrylate, each having two 2‐ethylhexyl side chains, and an amine‐linked di(2‐ethylhexyl)acrylate (AL‐Eh), having three 2‐ethylhexyl side chains, were synthesized and (co)polymerized to evaluate the effects of differences in the structures of the monomers on final (co)polymer properties, particularly glass transition temperature, T_g. The free radical polymerizations of these monomers yielded high‐molecular–weight polymers. Cyclopolymer formation of ED‐Eh and AL‐Eh was confirmed by ¹³C NMR analysis and the cyclization efficiencies were found to be very high (～100%). Copolymers of ED‐Eh, EHDE, and AL‐Eh with methyl methacrylate (MMA) showed significant T_g decreases over poly(methyl methacrylate) (PMMA) due to 2‐ethylhexyl side groups causing “internal” plasticization. Comparison of the T_g's of the copolymers of 2‐ethylhexyl methacrylate, ED‐Eh, EHDE, and AL‐Eh with MMA revealed that the impacts of these monomers on depression of T_g's are identical with respect to the total concentration of the pendent groups. This is consistent with an earlier study involving copolymers of monomers comprising one and two octadecyl side groups with MMA. That is, the magnitude of decrease in T_g's was quantitatively related to the number of the 2‐ethylhexyl pendent groups in the copolymers rather than their placement on the same or randomly incorporated repeat units. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2302–2310, 2010     

Synthesis and polymerization of new di‐octadecyl ester derivatives of α‐hydroxymethyl acrylate: A structure‐property correlation for their copolymers with methyl methacrylate

New ether dimer (ED‐Od) and diester (ODE) derivatives of α‐hydroxymethylacrylate, each having two octadecyl side chains, were synthesized and (co)polymerized to evaluate the effects of differences in the structures of the monomers on final (co)polymer properties, particularly glass transition temperature. The free radical polymerizations of both monomers yielded high‐molecular weight polymers. Cyclopolymer formation of ED‐Od was confirmed by ¹³C NMR analysis and the cyclization efficiency (0.95 or greater) was found to be as high as the cyclization efficiencies of the cyclopolymerizations of ether dimers of various alkyl α‐hydroxymethylacrylates synthesized previously. Copolymers of both ED‐Od and ODE with methyl methacrylate (MMA) showed significant T_g decreases over PMMA due to octadecyl side groups causing “internal” plasticization. Comparison of the T_g's of the copolymers of octadecyl methacrylate, ED‐Od and ODE with MMA revealed that the impacts of these monomers on depression of T_g's are identical. That is, the magnitude of decrease in T_g's was quantitatively related to the number of the octadecyl side groups in the copolymers rather than their placement on the same or randomly incorporated repeat units. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7785–7793, 2008     

Synthesis and radical polymerization of acrylate and methacrylate bearing an isocyanurate core with adamantyl bisurethane moieties

In this article, we report the synthesis of acrylate and methacrylate bearing an isocyanurate core with two adamantyl urethane moieties and their radical homo- and copolymerization with n-butyl methacrylate (BMA). The synthesized polyacrylate exhibits higher 5% weight loss and glass transition temperatures (T_d5 and T_g) than those of the comparative polyacrylate, synthesized from the isocyanurate-based acrylate with two hexyl urethane moieties, suggesting that the rigid adamantane core incorporated in the side chains of polymer largely contributes to increase in thermal stability of polymer. Similarly, the obtained copolymers show higher T_g values than that of homopolymer derived from BMA, leading to the synthesized monomers are useful as a comonomer to enhance thermal property of polymer.     

Crosslinked liquid crystal polymers from liquid crystal monomers: Synthesis and mechanical properties

Difunctional acrylates and methacrylate monomers have been made which are high order smectic liquid crystal (or crystalline) at room temperature. This report discusses materials with the following structure: F–S–M–S–F, where F is a functional group, acrylate or methacrylate (A or M); S is a spacer (CH₂)_n(n), and M is a mesogen—in this case 4,4′-dioxybiphenyl (B). They are codified as BnA or BnM where n is the number of methylenes in the spacer. High conversion with high T_g can be obtained when polymerizing in the smectic state because the reactive end groups are concentrated in a small volume and can react well with little or no diffusion. B2A, B3A, B6A, B11A, and B3M were polymerized in the smectic state and compared to polymers made at temperatures where the monomers were isotropic. High conversion was obtained below final T_g—even then, probably because the polymers were ordered. All the polymers were studied by WAXD and dynamic mechanical spectroscopy. Solid-state NMR on B3A showed that there was very high conversion of the double bonds at all temperatures. B3A photopolymerized in the smectic state (60–76°C) produced a crystalline polymer with T_g = 185°C (1 Hz). When photopolymerized at 85°C, above the isotropization temperature (T_i), a poorly organized polymer was obtained with a T_g of 155°C (1 Hz). Monomers with an odd number of methylene groups as spacers were crystalline after polymerization. With an even number of methylene groups, they lost most of their crystallinity on polymerization below T_i, but retained a low order smectic structure. Similar structures were obtained with all the monomers when they were polymerized above T_i. There was little effect of polymerization temperature on T_g when the spacers had an even number of methylene groups. © 1993 John Wiley & Sons, Inc.     

Mechanism of generation of photoelastic birefringence in methacrylate polymers for optical devices

We clarified the birefringence properties of poly(methyl methacrylate), poly(ethyl methacrylate), poly(isobutyl methacrylate), poly(cyclohexyl methacrylate), poly(isopropyl methacrylate), and poly(tert‐butyl methacrylate). We demonstrated that the conformational change in polymer molecules that causes orientational birefringence differs from that causing photoelastic birefringence. Orientational birefringence depends mainly on the orientation of the main chains of the methacrylate polymers above T_g. On the other hand, photoelastic birefringence in elastic deformation below T_g depends mainly on the orientation of the side chains while the main chains are scarcely oriented. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 2029–2037, 2010     

Cationic equilibrium ring-opening polymerization of bicyclic monomers and its application to chemical recycling

Spiro orthoesters give poly(cyclic orthoester)s by single ring-opening polymerization in the presence of acid catalysts, and this process undergoes the equilibrium polymerization. We have applied the function of equilibrium polymerization to chemical recycling of polymeric materials. Crosslinked poly(cyclic orthoester)s, prepared by radical additions of poly(cyclic orthoester)s possessing exomethylene groups and dithiols, efficiently decrosslinked to bifunctional spiro orthoesters in the presence of CF₃CO₂H in CH₂Cl₂. The dithiol-linked bifunctional spiro orthoester monomers, prepared by the radical additions of spiro orthoester possessing exomethylene group and dithiols, afforded the corresponding crosslinked polymers in the presence of CF₃CO₂H as a catalyst in bulk. The decrosslinking of the obtained crosslinked polymer proceeded quantitatively to obtain the corresponding bifunctional monomer at room temperature in CH₂Cl₂. Further, an acid-catalyzed reversible crosslinking-decrosslinking of a polymer having a spiro orthoester group in the side chain was carried out. The copolymer obtained by the radical copolymerization of 2-methylene-1,4,6-trioxaspiro[4.6]undecane with acrylonitrile was treated with CF₃CO₂H at −10 °C in CH₂Cl₂ to afford the crosslinked polymer quantitatively. The crosslinked polymer was then treated with CF₃CO₂H at room temperature at a low concentration in CH₂Cl₂ to recover the original polymer.     

Design and synthesis of highly photopolymerizable styrenyl compounds in solid‐state photoinitiated polymerization

We designed a new type of styrenyl compound applicable to conventional photopolymerization systems, aiming at the production of polymers with improved mechanical properties, resistance to chemicals, and elevated glass‐transition temperatures (T_g's). A series of styrenyl monomers bearing 2,5‐dithio‐1,3,4‐thiadiazole groups were prepared, and their reactivity was studied in solid‐state photopolymerization initiated by 2‐(4′‐methoxystyryl)‐4,6‐bis(trichloromethyl)‐1,3,5‐triazine. These monomers exhibited much higher polymerization rates than usual, and the final conversion nearly reached completion, despite the relatively high T_g of the solid‐state photopolymerization system. Even at temperatures below T_g, the polymerization proceeded without a ceiling phenomenon. These features were explained by intermolecular interactions between the monomers that induced monomer alignments effective for solid‐state polymerization, large excess free volumes arising from rotation around the methylthio groups, and intramatrix radical migration leading to encounters with the remaining monomers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3227–3242, 2003     

Polymerization of surface-active monomers. II. Polymerization of quarternary alkyl salts of dimethylaminoethyl methacrylate with a different alkyl chain length

The cationic monomers (C_NBr), obtained by quarternization of dimethylaminoethyl methacrylate with n-alkyl bromide containing varying carbon number (N = 4, 8, 12, 14, and 16) were polymerized with radical initiators in water and various organic solvents. The degree of polymerization of the resulting polymers was determined by GPC measurements on poly(methyl methacrylate) samples derived from them. The rate of polymerization of the micelle-forming monomers (N = 8, 12, 14, and 16) in water increases with increasing a chain length of alkyl group, whereas it is little dependent on N in isotropic solution in dimethylformamide. The data on the degree of polymerization for the polymers of C₄Br, C₈Br, and C₁₂Br show that the polymerization of C₁₂Br with azo initiators in water and benzene gives polymers with a very high degree of polymerization. The results obtained here suggest that highly developed or relatively rigid, aggregated structures of monomers in solution are responsible for the formation of the polymers with a very high degree of polymerization, in addition to an enhanced rate of polymerization. Also considered are the relation of the molecular weight of poly(C₁₂Br) to the viscosity data in chloroform and methanol.     

New amorphous perfluoro polymers: perfluorodioxolane polymers for use as plastic optical fibers and gas separation membranes

To address the need for perfluoro polymers with higher T_g, we have prepared and characterized various perfluorodioxolane monomers via direct fluorination of the hydrocarbon precursors. These monomers were readily polymerized in bulk or in solution initiated by perfluorodibenzoyl peroxide. The polymers obtained have relatively high T_g(~160°C) and exhibited low material dispersion. These polymers are completely amorphous and soluble in fluorinated solvents. The polymers are also chemically and thermally stable (T_g > 300°C). Thus, these perfluorodioxolane polymers may be used as plastic optical fiber material where high T_g is required, such as in automobile and aircraft application. These perfluorodioxolane polymers were also investigated for use as gas separation membrane. Among these polymers, the copolymer of perfluoro (2‐methylene‐1,3‐dioxolane) and perfluoro (2‐methylene‐4,5‐dimethyl dioxolane) showed superior gas separation performance compared with the commercial perfluoro polymers for a number of gas pair, including CO₂/CH₄, H_e/CH₄, H₂/CH₄, and N₂/CH₄. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and characterization of mesogen‐jacketed liquid‐crystal polymers based on 2,5‐bis(4′‐alkoxyphenyl)styrene

A series of novel mesogen‐jacketed liquid‐crystal polymers, poly[2,5‐bis(4′‐alkoxyphenyl)‐styrene] (P‐n, n = 1–11), were prepared via free‐radical polymerization of newly synthesized monomers, 2,5‐bis(4′‐alkoxyphenyl)styrene (M‐n, n = 1–11). The influence of the alkoxy tail length on the liquid‐crystalline behaviors of the monomers and the polymers was investigated with differential scanning calorimetry (DSC), thermogravimetry, polarized optical microscopy (POM), and wide‐angle X‐ray diffraction (WAXD). The monomers with n = 1–4, 9, and 11 were monotropic nematic liquid crystals. All other monomers exhibited enantiotropic nematic properties. Their melting points (T_m's) decreased first as n increased to 6, after which T_m increased slightly at longer spacer lengths. The isotropic–nematic transition temperatures decreased regularly with increasing n values in an odd–even way. The glass‐transition temperatures (T_g's) of the polymers first decreased as the tail lengths increased and then leveled off when n ≥ 7. All polymers were thermally stable and entered the mesophase at a temperature above T_g. Upon further heating, no mesophase‐to‐isotropic melt transition was observed before the polymers decomposed. WAXD studies indicated that an irreversible order–order transition for the polymers with short tails (n ≤ 5) and a reversible order–order transition for those with elongated tails (n ≥ 6) occurred at a temperature much higher than T_g. However, such a transition could not be identified by POM and could be detected by DSC only on heating scans for the polymers with long tails (n ≥ 7). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1454–1464, 2003     

Effect of dopant structure on refractive index and glass transition temperature of polymeric fiber‐optic materials

Graded‐index plastic optical fibers, composed of doped polymers, have advantages over conventional glass optical fibers, but need to be developed further for practical application. Here, a variety of aromatic sulfide dopants were synthesized, and their effects on the refractive indexes and glass transition temperatures (T_g) of poly(methyl methacrylate) and methyl 2‐chloroacrylate/2,2,2‐trichloroethyl methacrylate copolymers were studied. While polymers containing large dopants exhibited relatively high refractive indices, their T_g values were low, making these materials unsuitable for graded‐index plastic optical fiber applications. Six dopants yielded polymers that exhibited higher T_g values than the conventionally used (diphenyl sulfide)‐doped polymer. The dopant dibenzothiophene, in particular, yielded polymers with the highest refractive indexes and T_g values, and polymers containing (phenylthio)benzene dopants also performed well. Copyright © 2013 John Wiley & Sons, Ltd.     

Polyimide structure–property relationships. II. Polymers from isomeric diamines

An extensive study of the effects of stereoisomeric variations in aromatic polyimide structures on polyimide properties was conducted. The structural variations were incorporated into the polyimides through the use of two complete series of isomeric aromatic diamine monomers, the diaminodiphenylmethanes and the diaminobenzophenones, as well as several pairs of diamine isomers. The ability of the diamines to polymerize was related to the basicities, and thus reactivities, of the amino groups. Diamines with an amino group located ortho to the group connecting the two aromatic rings were successfully polymerized with dianhydrides for the first time to high molecular weight poly(amic acids). The stereoisomeric polyimides were characterized by determining the glass transition temperatures T_g, mechanical properties, and thermooxidative stabilities of thin films of the polymers. The polymers prepared from p-diamines were shown to have the highest softening points and thus, the most rigid molecular structures. Those synthesized from m-diamines had the lowest T_g values, inferring the most flexible molecular backbone. With limited exceptions, the use of diamines with ortho-oriented amine groups failed to improve the flexibility of the polyimides since their T_g values were usually as high as those of polymers made from p-diamines. Only slight differences in mechanical properties of the isomeric polyimide films were attributable to the variations in isomeric structure, except for those properties dependent upon T_g changes, such as elevated temperature mechanical properties. A study of the thermooxidative stability of the polyimides showed little difference between the polymers prepared from the diaminobenzophenones, but marked differences were observed between the individual members of the diaminodiphenylmethane-derived polyimides.     

Melt transesterification and characterization of segmented block copolyesters containing 2,2,4,4‐tetramethyl‐1,3‐cyclobutanediol

Conventional melt transesterification successfully produced high‐molecular‐weight segmented copolyesters. A rigid, high‐T_g polyester precursor containing the cycloaliphatic monomers, 2,2,4,4‐tetramethyl‐1,3‐cyclobutanediol, and dimethyl‐1,4‐cyclohexane dicarboxylate allowed molecular weight control and hydroxyl difunctionality through monomer stoichiometric imbalance in the presence of a tin catalyst. Subsequent polymerization of a 4000 g/mol polyol with monomers comprising the low‐T_g block yielded high‐molecular‐weight polymers that exhibited enhanced mechanical properties compared to a nonsegmented copolyester controls and soft segment homopolymers. Reaction between the polyester polyol precursor and a primary or secondary alcohol at melt polymerization temperatures revealed reduced transesterification of the polyester hard segment because of enhanced steric hindrance adjacent to the ester linkages. Differential scanning calorimetry, dynamic mechanical analysis, and tensile testing of the copolyesters supported the formation of a segmented multiblock architecture. Further investigations with atomic force microscopy uncovered unique needle‐like, interconnected, microphase separated surface morphologies. Small‐angle X‐ray scattering confirmed the presence of microphase separation in the segmented copolyesters bulk morphology. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Effect of polymer architecture on self‐diffusion of LC polymers

Two LC side‐group poly(methacrylates) were synthesized, and their melt dynamics were compared with each other and a third, main‐chain side‐group combined LC polymer. A new route was developed for the synthesis of the poly(methacrylate) polymers which readily converts relatively inexpensive perdeuteromethyl methacrylate to other methacrylate monomers. Self‐diffusion data was obtained through the use of forward recoil spectrometry, while modulus and viscosity data were measured using rotational rheometers in oscillatory shear. Diffusion coefficients and complex viscosity were compared to previous experiments on liquid crystal polymers of similar architecture to determine the effect of side‐group interdigitation and chain packing on center of mass movement. The decyl terminated LC side‐group polymer possessed an interdigitated smectic phase and a sharp discontinuity in the self‐diffusion behavior at the clearing transition. In contrast, the self‐diffusion behavior of the methyl terminated LC side‐group polymer, which possessed head‐to‐head side‐group packing, was seemingly unaffected by the smectic–nematic and nematic–isotropic phase transitions. The self‐diffusion coefficients of both polymers were relatively insensitive to the apparent glass transition. The presence of moderately fast sub‐T_g chain motion was supported by rheological measurements that provided further evidence of considerable molecular motion below T_g. The complex phase behavior of the combined main‐chain side‐group polymer heavily influenced both the self‐diffusion and rheological behavior. Differences between the self‐diffusion and viscosity data of the main‐chain side‐group polymer could be interpreted in terms of the defect structure. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 405–414, 1999     

Synthesis and characterisation of polymethacrylates containing para-, meta- and ortho-monosubstituted azobenzene moieties in the side chain

Three sets of novel side-chain liquid crystalline polymers with monosubstituted azobenzene moieties in the side-chain have been studied. These are poly(p-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PPHABM), poly(m-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (PMHABM) and poly(o-(4′-methoxy-4-oxyhexyloxy azobenzene) benzyl methacrylate) (POHABM). The chemical structure of the monomers was confirmed by ¹H NMR, ¹³C NMR spectroscopy and elemental analysis. The structural characterisation of the polymers was performed by ¹H NMR spectroscopy and gel permeation chromatography, and their phase behaviour and liquid crystalline properties were studied using differential scanning calorimetry, polarised optical microscopy and wide-angle X-ray diffraction. The results show that the transitional behaviour of side-chain liquid crystalline polymers containing monosubstituted azobenzene moieties depends strongly on the position of the substituent on the azobenzene moiety; for example, the ortho-monosubstituted polymers do not form liquid crystalline phases, but all the para- and meta-monosubstituted polymers exhibit a smectic A phase. Furthermore, the glass transition temperature (T_g ) of the polymers decreases in the order, para > meta > ortho. For the PPHABM and PMHABM polymers the isotropic temperature (T_i ) and liquid crystalline range (ΔT, from T_g to T_i ) are found to be in the order, para > meta, although it is surprising that the associated enthalpy changes in these polymers is the opposite order, meta > para.     

Vinyl‐triazolium monomers: Versatile and new class of radically polymerizable ionic monomers

A set of eight functional 4‐vinyl‐1,2,3‐triazolium monomers were synthesized using copper catalyzed azide‐alkyne 2 + 3 Hüisgen cycloaddition. These vinyl‐trizolium monomers readily polymerized via free radical polymerization. The physical properties of the vinyl‐triazolium based poly(ionic liquid)s (PILs) are strongly dependent on the pendant functional groups. These polymers were characterized for glass transition temperature (T_g), solubility, and the thermal decomposition. The vinyl‐triazolium based PILs offer an efficient route to highly functional PILs with the advantage of facile synthesis and the ability to incorporate many desirable functional moieties. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 417–423     

Radical copolymerization of 2-vinyl pyridine and oligo(ethylene glycol) methyl ether methacrylates: Monomer reactivity ratios and thermal properties

Statistical copolymers of 2-vinylpyridine (VP) with oligo(ethylene glycol) methyl ether methacrylates of two different molecular weights (300 g/mol (OEGMA₃₀₀) and 1100 g/mol (OEGMA₁₁₀₀)), were prepared by free radical polymerization. The reactivity ratios of these two sets of monomers were estimated using the Finemann–Ross, the inverted Finemann–Ross and the Kelen–Tüdos graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad monomer sequence fractions and the mean sequence length. The effect of the length of the oligo(ethylene glycol) group on the copolymer structure is discussed. The glass-transition temperature (T_g) values of the VP copolymers with OEGMA₃₀₀ were measured and examined in the frame of several theoretical equations, allowing the prediction of these T_g values. The copolymers of VP with OEGMA₁₁₀₀ exhibited the characteristic melting endotherm, due to the crystallinity of the methacrylate sequences and glass transition temperatures attributed to the PVP sequences.