Encapsulating doxorubicin-intercalated lamellar nanohydroxyapatite into PLGA nanofibers for sustained drug release

In this work, doxorubicin (DOX) was intercalated into layered nanohydroxyapatite (LHAp). The drug loaded LHAp (DOX@LHAp) was then mixed with poly(lactic-co-glycolic acid) (PLGA) and electrospun to yield DOX@LHAp/PLGA composite scaffolds. As control, needle-like nanohydroxyapatite (nHAp) was also used to make an DOX@nHAp/PLGA composite scaffold and bare DOX was used to fabricate DOX/PLGA scaffold. The morphology, release behavior of DOX, and capability to inhibit cancer cells were assessed. The addition of DOX-loaded nHAp to PLGA causes a slight decrease in the average fiber diameter of DOX@LHAp/PLGA as compared to PLGA. The in vitro drug release tests reveal a much faster release of DOX from DOX/PLGA than DOX@LHAp/PLGA. Moreover, DOX@LHAp/PLGA displays a more sustainable release over DOX@nHAp/PLGA due to the storage of DOX in the gallery of LHAp, which is further proved by their cancer cell inhibition results. We believe that the DOX@LHAp/PLGA scaffold has potential as an implantable drug delivery system.     

Core–Shell Bi2Se3@mSiO2‐PEG as a Multifunctional Drug‐Delivery Nanoplatform for Synergistic Thermo‐Chemotherapy with Infrared Thermal Imaging of Cancer Cells

Thermo‐chemotherapy combining photothermal therapy (PTT) with chemotherapy has become a potent approach for antitumor treatment. In this study, a multifunctional drug‐delivery nanoplatform based on polyethylene glycol (PEG)‐modified mesoporous silica‐coated bismuth selenide nanoparticles (referred to as Bi₂Se₃@mSiO₂‐PEG NPs) is developed for synergistic PTT and chemotherapy with infrared thermal (IRT) imaging of cancer cells. The product shows no/low cytotoxicity, strong near‐infrared (NIR) optical absorption, high photothermal conversion capacity, and stability. Utilizing the prominent photothermal effect, high‐contrast IRT imaging and efficient photothermal killing effect on cancer cells are achieved upon NIR laser irradiation. Moreover, the successful mesoporous silica coating of the Bi₂Se₃@mSiO₂‐PEG NPs cannot only largely improve the stability but also endow the NPs high drug loading capacity. As a proof‐of‐concept model, doxorubicin (DOX) is successfully loaded into the NPs with rather high loading capacity (≈50.0%) via the nanoprecipitation method. It is found that the DOX‐loaded NPs exhibit a bimodal on‐demand pH‐ and NIR‐responsive drug release property, and can realize effective intracellular drug delivery for chemotherapy. The synergistic thermo‐chemotherapy results in a significantly higher antitumor efficacy than either PTT or chemotherapy alone. The work reveals the great potential of such core–shell NPs as a multifunctional drug‐delivery nanosystem for thermo‐chemotherapy.     

Expedition on surface adsorption of N-nitrosodiethylamine from rubber fumes on blue phosphorene sheets – a first-principles insight

In recent days, humans are easily exposed to many work-related health issues. N-nitrosodiethylamine (NDE), which is considered to be a harmful carcinogenic agent released from rubber-based industries imparts a long-lasting effect on human health and immunity system. The current research investigates the ability of the two-dimensional nanomaterial, blue phosphorene nanosheet (BPNS) to detect the presence of NDE in the environment. Besides, the electronic and structural characteristics of BPNS are initially explored and NDE target vapour is permitted to interact with the chief component, BPNS. We have also designed blue phosphorene device to study the adsorption properties of NDE vapours based on current–voltage characteristics. The adsorption attributes are accounted for the target vapour adsorbed chief component, the results suggest that BPNS can be employed in detecting NDE vapours.     

具有双重治疗机制的磁性纳米无定型氧化铁基药物递送系统

合成一种具有pH响应性的聚乙二醇(PEG)修饰无定形介孔氧化铁纳米粒子(AFe-PEG). 这种纳米粒子可以高效负载药物分子如阿霉素(DOX),构成新型多功能AFe-PEG/DOX药物递送体系. DOX的负载率高达948 mg/g-纳米粒子. 在酸性溶液中,AFe-PEG/DOX纳米粒子不仅可以有效释放DOX,同时可以释放Fe离子进行Fenton反应,将H₂O₂转变成·OH自由基. 体外实验结果表明,AFe-PEG/DOX纳米粒子对HeLa细胞同时具有化疗和化学动力学疗法的疗效. 同时,由于AFe-PEG/DOX 纳米粒子本身的磁性,使其在外部磁场中的细胞内化效率也得到了提高.     

A Functionalized Hollow Mesoporous Silica Nanoparticles‐Based Controlled Dual‐Drug Delivery System for Improved Tumor Cell Cytotoxicity

Multifunctional nanoparticles for selectively targeting tumor cells and effectively delivering multiple drugs are urgently needed in cancer therapy. Here, a dual‐drug delivery system is prepared, based on functionalized hollow mesoporous silica nanoparticles (HMSNs). Doxorubicin (DOX) hydrochloride is loaded into the hollow core, and dichloro(1,2‐diaminocyclohexane)platinum (II) (DACHPt) is stored in the pores of the shell by the coordination interaction with the carboxyl groups modified on the pore walls, which also serves as barriers to control the DOX release. Detailed studies in vitro indicate that the DACHPt release is triggered by Cl^? through the cleavage of the coordination interaction, and the DOX release depends on the release rate of DACHPt and the environmental pH value. The surface of the mechanized nanoparticles is also modified by transferrin (Tf) to achieve the tumor specificity. Compared with individual drug delivery systems, the dual‐drug delivery system shows synergistic efficacy on the cell cytotoxicity (combination index = 0.30), resulting in improved tumor cell killing. The present dual‐drug delivery system provides a promising strategy to develop controlled and targeted combination therapies for efficient cancer treatment.     

Crystallization Behavior of Poly(Trimethylene Terephthalate)/Polycarbonate Blends

The crystallization behavior of poly(trimethylene terephthalate (PTT) in compatibilized and uncompatibilized PTT/polycarbonate (PC) blends are investigated in the research reported in this paper. The differential scanning calorimetry (DSC) results showed that the crystallization behaviors of PTT/PC blends were very sensitive to PC content. The onset (T_ci) and the peak (T_c) crystallization temperatures shifted to lower temperatures whereas the area of the exotherm decreased quickly as the PC content was increased. The Avrami exponent, n, decreased from 4.32 to 3.61 as the PC content was increased from 0 to 20 wt %, and the growth rate constant, Z _c , decreased gradually as well. This suggests that the nucleation mechanism exhibits the tendency of changing gradually from a thermal nucleation to an athermal mode although the growth mechanism still remains three‐dimensional. When epoxy (2.7 phr) was added as a compatibilizer during melt blending, the T_ci and T_c shifted slightly to higher temperature (≤2°C), and the crystallization enthalpy, however, exhibited an increased crystallinity with the exception of the 90/10/2.7 phr PTT/PC/Epoxy. This suggests that the epoxy make a positive contribution to the PTT crystallization. Moreover, the influences of epoxy on the crystallization behaviors of PTT/PC blends are related to the epoxy content. By contrast, the compatibilizer of ethylene‐propylene‐diene copolymer graft glycidyl methacrylate (EPDM‐g‐GMA, ≤6.3 phr) had little effect on the crystallization behavior of PTT/PC blends. For PTT/PC/Epoxy (2.7 phr) blends, the Avrami exponent, n, decreased to near 3, while the growth rate constant, Z _c , increased slightly as PC content was increased from 0 to 20 wt %. It is suggested that epoxy accelerated the process of the nucleation mechanism changing from thermal nucleation to an athermal mode. The EPDM‐g‐GMA had little effect on the nucleation mode and spherical growth mechanism. The PTT spherulite morphologies in PTT/PC blends were very sensitive to blend composition. Completely different morphologies were observed in pure PTT, PTT/PC, PTT/PC/Epoxy, and PTT/PC/EPDM‐g‐GMA blends.     

A Simple,Scalable Process for the Production of Porous Polymer Microspheres by Ink‐Jetting Combined with Thermally Induced Phase Separation

Porous microspheres capable of delivering high payloads of biomolecules with suitable biodegradability and biocompatibility would be valuable in delivery systems to aid tissue regeneration. This study describes a facile, scalable technique to produce biodegradable porous microspheres by combining continuous ink‐jetting through a piezoelectric nozzle with thermally induced phase separation (TIPS). A selection of biomaterials is investigated to suit delivery in tissue engineering, the synthetic polyesters poly(lactic‐co‐glycolic acid) (PLGA), and poly caprolactone (PCL) and a natural polymer, gelatin. The parameters governing the microsphere production are determined experimentally and compared to theoretical predictions derived from the fluid mechanics and heat transfer during the ink‐jetting process. The microspheres produced have open interconnected pores with mean particle diameters of 80–200 μm and no significant skin region. The physical properties, such as the mean particle diameter, pore size, and surface area could be controlled by varying production parameters including the ink‐jetting pressure, nozzle height, and the size and oscillation frequency of the nozzle. The technique is demonstrated to successfully encapsulate a model hydrophobic molecule during microsphere production with uniform distribution. Porous PLGA microspheres are also used to achieve much higher adsorption capacities of a short peptide than non‐porous microspheres of the same material.     

Construction of a Dual Drug Carrier on the Basis of Hollow Structured Upconversion Nanoparticles for pH‐Responsive Drug Delivery and UCL/MRI Dual Mode Imaging

A series of Gd³⁺ doping hollow upconversion nanoparticles NaYF₄:Yb,Gd,Tm (h‐UNCP) are prepared successfully. The hollow NaYF₄:Yb,Gd,Tm possess excellent upconversion luminescence (UCL) and large longitudinal relativity (r₁ = 128.3 mm ^?1 s^?1), which can be potentially used for UCL/magnetic resonance imaging (MRI) dual mode imaging. On the basis of the optimal h‐UCNP, doxorubicin hydrochloride (DOX) and methotrexate (MTX) are used as drug models to prepare a dual drug carrier. After the encapsulation of DOX on the h‐UCNP, chitosan (CS) is further wrapped and then used to load MTX to obtain a dual drug carrier h‐UCNPs/DOX/CS/MTX. The pH responsive release of DOX and MTX is discussed. The MTX release climbs from 33% to 100% by regulating the pH from 5.8 to 7.4. The DOX release is different at different pH conditions. The synergistic effect of DOX and MTX on the cancer cells is confirmed by cell viability. The h‐UCNPs/DOX/CS/MTX are tracked by cells UCL imaging and vivo MRI imaging. The excellent performance of UCL imaging and positive MRI images demonstrates that h‐UCNPs/DOX/CS/MTX can be used for UCL/MRI dual mode imaging. All the results show the potential application of h‐UCNPs/DOX/CS/MTX in pH responsive release and UCL/MRI dual imaging.     

Reactive Compatibilization of Poly(trimethylene terephthalate)/Polypropylene Blends by Polypropylene‐graft‐Maleic Anhydride. Part 1. Rheology,Morphology, Melting,and Mechanical Properties

Poly(trimethylene terephthalate)/polypropylene (PTT/PP) blends were prepared by melt blending. The rheology, morphology, melting, and mechanical properties of PTT/PP blends were investigated with and without the addition of polypropylene‐graft‐maleic anhydride (PP‐g‐MAH). The melt viscosity results showed that the fluid behavior of PTT/PP blends exhibited great disparity to that of PTT but similar to that of PP; the dispersed flexible PP phase in the blends served as a “ball bearing effect” under shear stress, which made the fluid resistance markedly reduced; by contrast, the relatively rigid PTT dispersed phase made only a small contribution to the viscosity. With 5 wt.% PP‐g‐MAH addition during melt processing, both the shear viscosity and the non‐Newtonian index of 70/30 PTT/PP blend were increased over that of the corresponding uncompatibilized one, whereas the shear viscosity of the 30/70 PTT/PP melt decreased slightly indicating that a considerable amount of PP‐g‐MAH did not act as compatibilizer but probably served as plasticizer.

With the increasing of the other component, the melting temperature of the PTT phase showed a slight decrease while the melting temperature of the PP phase showed a slight increase. 5 wt.% PP‐g‐MAH addition had little influence on the melting temperatures of the two components. When PP≤20 wt.%, the cold crystallization temperature of the PTT phase (T_cc (PTT‐phase)) showed little change with the composition; however, it shifted to higher temperature when PP≥30 wt.%. The variations of the T_cc (PTT‐phase), with and without PP‐g‐MAH, suggested that, when PTT was a minor component, the excess PP‐g‐MAH which did not act as compatibilizer might serve as a plasticizer that made the PTT's cold crystallization process to be easier. The SEM results indicated that, for the uncompatibilized blends, the interfaces from particles pulling‐out are clear and smooth, while, for compatibilized blends, the reactive products are at the interfaces. The mechanical properties suggested that PP‐g‐MAH did not result in significant improvement of the toughness of the blend, but the tensile strength increased markedly.     

Isothermal Melt Crystallization Kinetics for Poly(Trimethylene Terephthalate)/Poly(Butylene Terephthalate) Blends

The kinetics of isothermal melt crystallization of poly(trimethylene terephthalate) (PTT)/poly(butylene terephthalate) (PBT) blends were investigated using differential scanning calorimetry (DSC) over the crystallization temperature range of 184–192°C. Analysis of the data was carried out based on the Avrami equation. The values of the exponent found for all samples were between 2.0 and 3.0. The results indicated that the crystallization process tends to be two‐dimensional growth, which was consistent with the result of polarizing light microscopy (PLM). The activation energies were also determined by the Arrhenius equation for isothermal crystallization. The values of ΔE of PTT/PBT blends were greater than those for PTT and PBT. Lastly, using values of transport parameters common to many polymers (U*=6280 J/mol, T _∞=T _g – 30), together with experimentally determined values of T _m ⁰ and T _g, the nucleation parameter, K _g, for PTT, PBT, and PTT/PBT blends was estimated based on the Lauritzen–Hoffman theory.     

Dual Responsive Poly(N‐vinylcaprolactam) Based Degradable Microgels for Drug Delivery

Poly(N‐vinylcaprolactam)‐based biodegradable microgels are prepared for drug delivery application via precipitation polymerization using diacetone acrylamide (DAAM) and dimethyl itaconate (IADME) as comonomers. The microgel particles are subsequently crosslinked by addition of adipic acid dihydrazide, which reacts with the ketone groups of DAAM. Itaconic acid (IA) groups are generated by the hydrolysis of IADME units inside the microgels resulting into both pH and temperature sensitive microgel particles. Volume phase transition temperature of the obtained microgels is influenced by both IA content and pH of the surrounding medium. Due to the incorporation of hydrazone linkages, the microgels show degradation under acidic conditions. These microgels can effectively encapsulate doxorubicin (DOX) as a model drug and show low DOX leakage under physiological conditions while rapid DOX release is observed at low pH. The results of the cytotoxicity assay further display that the DOX‐loaded microgels exhibit effective antitumor activity against HeLa cells demonstrating their great potential as drug delivery carriers for cancer therapy.     

Reactive Compatibilization of Poly(trimethylene terephthalate)/Polypropylene Blends by Polypropylene‐graft‐Maleic Anhydride. Part 2. Crystallization Behavior

The crystallization behavior of uncompatibilized and reactive compatibilized poly(trimethylene terephthalate)/polypropylene (PTT/PP) blends was investigated. In both blends, PTT and PP crystallization rates were accelerated by the presence of each other, especially at low concentrations. When PP content in the uncompatibilized blends was increased to 50–60 wt%, PTT showed fractionated crystallization; a small PTT crystallization exotherm appeared at ～135°C besides the normal ～175°C exotherm. Above 70 wt% PP, PTT crystallization exotherms disappeared. In contrast, PP in the blends showed crystallization exotherms at 113–121°C for all compositions. When a maleic anhydride‐grafted PP (PP‐g‐MAH) was added as a reactive compatibilizer, the crystallization temperatures (T _c ) of PTT and PP shifted significantly to lower temperatures. The shift of PTT's T _c was larger than that of the PP, suggesting that addition of the PP‐g‐MAH had a larger effect on PTT's crystallization than on PP due to reaction between maleic anhydride and PTT.

The nonisothermal crystallization kinetics was analyzed by a modified Avrami equation. The results confirmed that PTT's and PP's crystallization was accelerated by the presence of each other and the effect varied with blend compositions. When the PP content increased from 0 to 60 wt%, PTT's Avrami exponent n decreased from 4.35 to 3.01; nucleation changed from a thermal to an athermal mode with three‐dimensional growths. In contrast, when the PTT content increased from 0 to 90 wt% in the blends, changes in PP's n values indicated that nucleation changed from a thermal (0–50 wt% PTT) to athermal (60–70 wt% PTT) mode, and then back to a thermal (80–90 wt% PTT) mode. When PP‐g‐MAH was added as a compatibilizer, the crystallization process shifted considerably to lower temperatures and it took a longer crystallization time to reach a given crystallinity compared to the uncompatibilized blends.     

Temperature and Redox Dual‐Responsive Biodegradable Nanogels for Optimizing Antitumor Drug Delivery

The strategy to efficiently deliver antitumor drugs via nanocarriers to targeted tumor sites and achieve controllable drug release is attracting great research interest in cancer therapy. In this study, a novel type of disulfide‐bonded poly(vinylcaprolactam) (PVCL)‐based nanogels with tunable volume phase transition temperature and excellent redox‐labile property are prepared. The nanogels are hydrophilic and swell at 37 °C, whereas under hyperthermia (e.g., 41 °C), the nanogels undergo sharp hydrophilic/hydrophobic transition and volume collapse, which enhances the cellular uptake and drug release. The incorporation of disulfide bond linkers endows the nanogels with an excellent disassembly property in reducing environments, which greatly facilitates drug release in tumor cells. Nanogels loaded with doxorubicin (DOX) (DOX‐NGs) (DOX‐NGs) are stable in physiological conditions with low drug leakage (15% in 48 h), while burst release of DOX (92% in 12 h) can be achieved in the presence of 10 × 10^?3 m glutathione and under hyperthermia. The DOX‐NGs possess improved cell killing efficiency under hyperthermia (IC₅₀ decreased from 1.58 μg mL^?1 under normothermia to 0.5 μg mL^?1). Further, the DOX‐NGs show a pronounced tumor inhibition rate of 46.6% compared with free DOX, demonstrating that this new dual‐responsive nanogels have great potential as drug delivery carriers for cancer therapy in vivo.     

Fabrication of Polypropylene (PP)/Poly Trimethylene Terephthalate (PTT)/Nanoclay Nanocomposite Fibers with Tailored Properties

Abstract

The main aim of this study was to deal with one of the major drawbacks of polypropylene (PP) fibers, i.e., low resiliency and low dyeability, by incorporating polytrimethylene terephthalate (PTT) fibrils, as a dispersed material, and organoclay, as a nano-filler, into the PP polymer matrix. The presence of 10?wt% of PTT and 0.5–1?wt% organoclay in the PP nanocomposite fibers led to an approximately 18.5% and 45.5% increase in the resilience behavior and dye uptake, respectively, compared to pure PP fibers, without using highly toxic carriers. The lowest mean diameter of the nano-fibrils was 75?nm for the hot drawn nanocomposite fiber samples as measured by scanning electron microscopy (SEM). The results of DSC indicated that the presence of both PTT and organoclay significantly influenced the crystallinity of the PP which also confirmed their nucleating effects in the nanocomposite fiber.     

Fabrication of Polypropylene/Poly (Trimethylene Terephthalate) Blend Fibers with Highly Improved Resiliency and Preserved Mechanical Properties

The main aim of this study was to deal with one of the major drawbacks of polypropylene (PP) fibers, i.e. low resiliency, by incorporating poly (trimethylene terephthalate) (PTT) nano-fibrils as a dispersed material into the PP polymer matrix. Thanks to the special helical shape of the PTT polymer backbone, the incorporated nano-fibrils of the PTT polymer strengthened the resiliency of the blend fibers. The presence of 10 and 15?wt% of PTT in the blend fibers led to an approximately 20% increase in the resilience behavior, compared to pure PP fibers, with the mechanical properties of the PP matrix preserved. The development of the fibrillar structures during the different steps of the melt spinning process was confirmed by scanning electron microscopy (SEM), and the lowest mean diameter of the nano-fibrils was 64?nm for the hot drawn blend fiber samples consisting of 10?wt% of PTT. In summary, we suggest the optimized blend fiber samples produced in this research will be a promising candidate for a wide range of engineering applications.     

Influence of ultrasonic processing on the macromolecular properties of poly (d,l-lactide-co-glycolide) alone and in its biocomposite with hydroxyapatite

In this work poly(d,l-lactide-co-glycolide) (PLGA) and a poly(d,l-lactide-co-glycolide)/hydroxyapatite (PLGA/HAp) composite processed in an ultrasonic field at higher (25 °C) and lower (8 °C) temperatures were studied with respect to the molecular properties of the obtained materials. The processing of the PLGA and the PLGA/HAp composite in an ultrasonic field resulted in a change of molar mass averages of the polymer/polymeric part of these materials, while an amorphous structure and a 50:50 lactide-to-glycolide co-monomer ratio were preserved without the formation of crystalline oligomers. However, mobility of polymeric chains obtained after ultrasonic processing was lower indicating ordering the structure of polymeric chains as a result of processing. Additionally, it was observed that the mobility of the PLGA macromolecules was lower within the composite in comparison with the mobility of the chains within the PLGA alone in the case when both were obtained after ultrasonic processing. This was a consequence of the structure formation through the interactions between the PLGA and the HAp. Based on these results different degradation rate of PLGA in composite can be expected, which is important in the application of this material for the controlled drug delivery of medicaments.     

Clustering of Iron Oxide Nanoparticles with Amphiphilic Invertible Polymer Enhances Uptake and Release of Drugs and MRI Properties

A functionalization of iron oxide nanoparticles (NPs) of different diameters by the amphiphilic invertible polymer, (PEG600‐alt‐PTHF650)_k (PEG and PTHF stand for poly(ethylene glycol) and poly(tetrahydrofuran), respectively), leads to different NP/polymer architectures for dye/drug uptake and release, as is reported here for the first time. It is demonstrated that 18.6 ± 1.4 and 11.9 ± 0.6 nm NPs are individually coated by this polymer, while 5.9 ± 0.6 nm NPs form nanoparticle clusters (NPCs) which could be isolated by either ultracentrifugation or magnetic separation. This phenomenon is most likely due to the character of the (PEG600‐alt‐PTHF650)_k macromolecule with alternating hydrophilic and hydrophobic fragments and its dimensions sufficient to cause NP clustering. Utilizing Rhodamine B base (RBB) and doxorubicin (DOX), the data on uptake upon mixing and further release via inversion into octanol (mimicking the penetration of the cell biomembrane) are presented. The magnetic NPCs display enhanced uptake and release of both RBB and DOX most likely due to the higher retained polymer amount. The NPCs also display exceptional magnetic resonance imaging properties. This and the high uptake/release efficiency of the NPCs combined with easy magnetic separation make them promising for theranostic probes for magnetically targeted drug delivery.     

Facile Functionalization of Gold Nanoparticles with PLGA Polymer Brushes and Efficient Encapsulation into PLGA Nanoparticles: Toward Spatially Precise Bioimaging of Polymeric Nanoparticles

Nanocarriers prepared from poly(lactide‐co‐glycolide) (PLGA) have broad biomedical applications. Understanding their cellular uptake and distribution requires appropriate visualization in complex biological compartments with high spatial resolution, which cannot be offered by traditional imaging techniques based on fluorescent or radioactive probes. Herein, the encapsulation of gold nanoparticles (GNPs) into PLGA nanoparticles is proposed, which should allow precise spatial visualization in cells using electron microscopy. Available protocols for encapsulating GNPs into polymeric matrices are limited and associated with colloidal instability and low encapsulation efficiency. In this report, the following are described: 1) a facile protocol to functionalize GNPs with PLGA polymer followed by 2) encapsulation of the prepared PLGA‐capped GNPs into PLGA nanocarriers with 100% encapsulation efficiency. The remarkable encapsulation of PLGA‐GNPs into PLGA matrix obeys the general rule in chemistry “like dissolves like” as evident from poor encapsulation of GNPs capped with other polymers. Moreover, it is shown that how the encapsulated gold nanoparticles serve as nanoprobes to visualize PLGA polymeric hosts inside cancer cells at the spatial resolution of the electron microscope. The described methods should be applicable to a wide range of inorganic nanoprobes and provide a new method of labeling pharmaceutical polymeric nanocarriers to understand their biological fate at high spatial resolution.     

Effects of Montmorillonite on the Nonisothermal Crystallization Behavior of the Poly(trimethylene terephthalate)/Polypropylene/Montmorillonite Nanocomposites

Organic montmorillonite (MMT) reinforced poly(trimethylene terephthalate) (PTT)/ polypropylene (PP) nanocomposites were prepared by melt blending. The effects of MMT on the nonisothermal crystallization of the matrix polymers were investigated using differential scanning colorimetry (DSC) and analyzed by the Avrami equation. The DSC results indicated that the effects of MMT on the crystallization processes of the two polymers exhibited great disparity. The PTT's crystallization was accelerated significantly by MMT no matter whether PTT was the continuous phase or not, but the thermal nucleation mode and three-dimensional growth mechanism remained unchanged. However, in the presence of MMT, the PP's crystallization was slightly retarded with PP as the dispersed phase, and was influenced little with PTT as the dispersed phase. When the MMT content was increased from 2_wt% to 7_wt%, the crystallization of the PTT phase was slightly accelerated, whereas the crystallization of the PP phase was severely retarded, especially at lower temperatures. Moreover, the nucleation mechanism for the PP's crystallization changed from a thermal mode to an athermal one. In the polypropylene-graft-maleic anhydride (PP-g-MAH) compatibilized PTT/PP blends, with the addition of 2_wt% MMT during melt blending, the T _c (PTT) shifted 7.8°C to lower temperature and had a broadened exotherm, whereas the T _c (PP) shifted 17.1°C to higher temperature, with a narrowed exotherm. TEM analysis confirmed that part of the PP-g-MAH was combined with MMT during blending.     

Microfluidic Fabrication of Multi‐Drug‐Loaded Polymeric Microparticles for Topical Glaucoma Therapy

In this paper, the fabrication and characterization of multi‐drug‐loaded microparticles are demonstrated for topical glaucoma therapy. Specifically, latanoprost (“LAT”) and dexamethasone (“DEX”) are loaded in monodisperse microparticles (diameter ≈150 μm) of a biodegradable polymer–poly (lactic‐co‐glycolic) acid (PLGA)—using capillary microfluidics coupled with solvent evaporation. Both individual (LAT in PLGA and DEX in PLGA) and combined (LAT and DEX in PLGA) microparticle formulations are demonstrated. The morphology, size distribution and in vitro release kinetics are studied, and in vitro mucoadhesion of the formulated microparticles is also assessed. In addition, discussion is placed in how precise knowledge of the particle composition enabled by the microfluidic fabrication method and in vitro release rate measurements allow for facile topical formulation design and dose optimization. Such precision‐fabricated, multi‐drug loaded, sustained‐release microparticles are envisioned to serve as a promising platform for topical administration of ocular drugs. This could potentially reduce the frequency of eyedrop‐based drug administration from several times a day to merely once a day (or less), thus greatly facilitating patient compliance and adherence to a strict therapeutic drug regimen.