Contorted Heteroannulated Tetraareno[a,d,j,m]coronenes

Fused polycyclic aromatic compounds are interesting materials for organic electronics applications. To fine-tune photophysical or electrochemical properties, either various substituents can be attached or heteroatoms (such as N or S) can be incorporated into the fused aromatic backbone. Coronenes and heterocoronenes are promising compounds in this respect. Up until now, the possibilities for varying the attached fused heteroaromatics at the coronene core were quite limited, and realizing both electron-withdrawing and -donating rings at the same time was very difficult. Here, a series of pyridine, anisole and thiophene annulated tetraareno[a,d,j,m]coronenes has been synthesized by a facile two-step route that is a combination of Suzuki-Miyaura cross-coupling and a following cyclization step, starting from three different diarenoperylene dibromides. The contorted molecular π-planes of the obtained cata-condensed tetraarenocoronenes were analyzed by single-crystal X-ray crystallography, and the photophysical and electrochemical properties were systematically investigated by UV/Vis spectroscopy and cyclovoltammetry.     

Tight Molecular Recognition of Benzo[a]pyrene by a High‐Affinity Antibody

Benzo[a ]pyrene, which is produced during the incomplete combustion of organic material, is an abundant noxious pollutant because of its carcinogenic metabolic degradation products. The high‐affinity (K _D≈3 nm ) monoclonal antibody 22F12 allows facile bioanalytical quantification of benzo[a ]pyrene even in complex matrices. We report the functional and X‐ray crystallographic analysis of 22F12 in complex with 3‐hydroxybenzo[a ]pyrene after cloning of the V‐genes and production as a recombinant Fab fragment. The polycyclic aromatic hydrocarbon is bound in a deep pocket between the light and heavy chains, surrounded mainly by aromatic and aliphatic amino acid side chains. Interestingly, the hapten–antibody interface is less densely packed than expected and reveals polar, H‐bond‐like interactions with the polycyclic aromatic π‐electron system, which may allow the antibody to maintain a large, predominantly hydrophobic binding site in an aqueous environment while providing sufficient complementarity to its ligand.     

Quadruply BN-Fused Tetrathia[8]circulenes with Flexible Frameworks: Synthesis,Structures and Properties

Quadruply BN-fused tetrathia[8]circulenes were synthesized through four-fold electrophilic borylation. The single-crystal X-ray diffraction analysis revealed that the BN-fused tetrathia[8]circulene with peripheral phenyl groups exhibits crystal polymorphism, in which the circulene core adopts both planar and saddle conformations in the solid state. The experimental and theoretical studies revealed that the weaker aromaticity of azaborine compared with benzene renders the flexibility of the BN-fused tetrathia[8]circulenes.     

Dianthracenylazatrioxa[8]circulene: Synthesis,Characterization and Application in OLEDs

A soluble, green-blue fluorescent, π-extended azatrioxa[8]circulene was synthesized by oxidative condensation of a 3,6-dihydroxycarbazole and 1,4-anthraquinone by using benzofuran scaffolding. This is the first circulene to incorporate anthracene within its carbon framework. Solvent-dependent fluorescence and bright green electroluminescence accompanied by excimer emission are the key optical properties of this material. The presence of sliding π-stacked columns in the single crystal of dianthracenylazatrioxa[8]circulene is found to cause a very high electron-hopping rate, thus making this material a promising n-type organic semiconductor with an electron mobility predicted to be around 2.26 cm² V⁻¹ s⁻¹. The best organic light-emitting diode (OLED) device based on the dianthracenylazatrioxa[8]circulene fluorescent emitter has a brightness of around 16 000 Cd m⁻² and an external quantum efficiency of 3.3 %. Quantum dot-based OLEDs were fabricated by using dianthracenylazatrioxa[8]circulene as a host matrix material.     

Synthesis and Crystal Structure of Dimorphic Dibenzo[cde,opq]rubicene

Dibenzo[cde,opq]rubicene has been synthesized by an eight-step reaction sequence including an iron-mediated [2+2+1] cycloaddition and a flash vacuum pyrolysis as key steps. Two crystal modifications of the S-shaped, planar polycyclic aromatic hydrocarbon have been obtained and characterized by X-ray diffractometry.     

Synthesis,Structures, and Physical Properties of Benzo[k]fluoranthene‐Based Linear Acenes

This work describes the syntheses, crystal structures, photophysical properties, and electro‐chemical analyses of benzo[k]fluoranthene‐based linear acenes, together with ab initio density functional theory computations on them. The molecules were prepared in generally moderate to good yields through Pd‐catalyzed cycloadditions between 1,8‐diethynylnaphthalene derivatives and aryl iodides. This protocol is simpler and more efficient than conventional methods. The scope and limitations of this reaction were examined. The structures of compounds 4 hb , 15 ac , 17 ab , 19 ac , and 24 je were determined by X‐ray analysis; they are either bent or twisted, rather than planar. The photophysical and electrochemical properties of these cycloadducts were also investigated and compared with computational predictions based on density functional theory.     

Exploration of the Photodegradation of Naphtho[2,3‐g] quinoxalines and Pyrazino[2,3‐b]phenazines

Nitrogen‐containing polycyclic aromatic hydrocarbons are very attractive compounds for organic electronics applications. Their low‐lying LUMO energies points towards a potential use as n‐type semiconductors. Furthermore, they are expected to be more stable under ambient conditions, which is very important for the formation of semiconducting films, where materials with high purity are needed. In this study, the syntheses of naphtho[2,3‐g]quinoxalines and pyrazino[2,3‐b]phenazines is presented by using reaction conditions, that provide the desired products in high yields, high purity and without time‐consuming purification steps. The HOMO and LUMO energies of the compounds are investigated by cyclic voltammetry and UV/Vis spectroscopy and their dependency on the nitrogen content and the terminal substituents are examined. The photostability and the degradation pathways of the naphtho[2,3‐g]quinoxalines and pyrazino[2,3‐b]phenazines are explored by NMR spectroscopy of irradiated samples affirming the large influence of the nitrogen atoms in the acene core on the degradation process during the irradiation. Finally, by identifying the degradations products of 2,3‐dimethylnaphtho[2,3‐g]quinoxaline it is possible to track down the most reactive position in the compound and, by blocking this position with nitrogen, to strongly increase the photostability.     

Simultaneous determination of urinary hydroxylated metabolites of naphthalene, fluorene, phenanthrene, fluoranthene and pyrene as multiple biomarkers of exposure to polycyclic aromatic hydrocarbons

A method is presented for determining monohydroxy polycyclic aromatic hydrocarbons (OHPAHs) having 2-, 3- and 4-rings in human urine by using high-performance liquid chromatography with fluorescence detection. A urine sample containing conjugates of OHPAHs was hydrolysed in the presence of beta-glucuronidase/aryl sulfatase and the solution was cleaned up with a solid-phase extraction (C(18) and silica). Eight OHPAHs, namely 1- and 2-hydroxynaphthalenes, 2-hydroxyfluorene, 2-, 3- and 4-hydroxyphenanthrenes, 3-hydroxyfluoranthene and 1-hydroxypyrene, were separated and 1- and 9-hydroxyphenanthrenes co-eluted on an alkylamide-type reversed-phase column with fluorimetric detection. The urinary concentrations of OHPAHs were quantified by using deuterated 1-hydoxypyrene as an internal standard. The method showed good repeatability for inter- and intra-day precisions as well as good linearity of calibration curves (r (2) ranged from 0.996 to 0.999). The limits of detection (S/N=3) were in the range from 2.3 fmol to 2.2 pmol per injection. This method was successfully applied to urine samples from non-smoking taxi drivers, traffic policemen and rural villagers of Chiang Mai, Thailand. The results showed higher urinary concentrations of OHPAHs in rural villagers, consistent with higher respiratory exposure to PAHs.     

Coil-helix and sheet-helix block copolymers via macroinitiation from telechelic ROMP polymers

Coil-helix and sheet-helix block copolymers are synthesized by combining the ring-opening metathesis polymerization (ROMP) of norbornene or paracyclophanediene with the anionic polymerization of phenyl isocyanide. Key to the design is the use of an μ-ethynyl palladium (II) functionalized chain-transfer agent (CTA) that can be exploited in a stepwise manner for the termination of ROMP and the initiation of the anionic polymerization. Both the coil- and sheet-macroinitiators, and the ensuing covalent block copolymers, are analyzed using ¹H NMR spectroscopy and gel-permeation chromatography. In all cases, the Pd-end group is maintained and all polymers demonstrate a monomodal distribution with dispersities (Đ) of 1.1–1.4. The resulting helix-coil and helix-sheet block copolymers formed by the macroinitiation route still demonstrate their intrinsic properties (fluorescence, preferential helix-sense). © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2991–2998     

Mass spectrometric analysis of 7-sulfoxymethyl-12-methylbenz[a]anthracene and related electrophilic polycyclic aromatic hydrocarbon metabolites

The Meso-region theory of polycyclic aromatic hydrocarbon (PAH) carcinogenesis predicts that the development of pronounced carcinogenicity depends on the introduction of a good leaving group on alkyl side-chains attached to the exceptionally reactive meso-anthracenic or L-region positions of PAHs. Thus, the first step in carcinogenesis by methylated PAHs such as 7,12-dimethylbenz[a]anthracene (DMBA) would be the hydroxylation of the L-region methyl groups, particularly the 7-methyl group. The second would be the formation of a metabolite, e.g. a sulfate ester, which is expected to be a good leaving group capable of generating a highly reactive benzylic carbocation. 7-Hydroxymethyl-12-methylbenz[a]anthracene (7-HMBA) is a metabolite of DMBA, and sulfation of 7-HMBA to a 7-sulfoxymethyl metabolite (7-SMBA) is a known Phase II metabolic process designed to facilitate excretion, but actually enabling more destructive side-reactions. These side-reactions occur with generation of an electrophilic 7-methylene carbonium ion, and/or by in vivo halide exchange to provide neutral side-products more capable of entering cells, especially those of DMBA target tissues. Electrospray ionization mass spectrometry (MS) enabled us to visualize 7-SMBA as an intact m/z 351 conjugate anion by negative mode, and as a released m/z 255 carbonium ion by positive mode. Upon prolonged refrigeration, 7-SMBA accumulated an m/z 383 photooxide, which appeared capable of re-evolving the starting material as visualized by tandem quadrupole MS, or MS/MS. The 7-SMBA carbonium ion provided interpretable fragments when studied by fragment ion MS/MS, including those representing the loss of up to several protons. Subtle differences in this property were encountered upon perturbing 7-SMBA, either by warming it at 37 degrees C for 2 h or by substituting the initial sulfoxy group with an iodo group. Side-reactions accounting for such proton losses are proposed, and are of interest whether they occur in the mass spectrometer, in solution or both; these proposals include acidity at the 12-methyl position and cyclization between the 12-methyl group and the adjacent C-1 position. It is also suggested that such side-reactions may comprise one route to relieving steric strain arising between the 12-methyl group and the angular benzo ring of 7-SMBA.     

The Precise Synthesis of Phenylene‐Extended Cyclic Hexa‐peri‐hexabenzocoronenes from Polyarylated [n]Cycloparaphenylenes by the Scholl Reaction

The longitudinal extension of cycloparaphenylenes (CPP) towards ultrashort carbon nanotubes (CNTs) is essential for the solution based bottom‐up synthesis of CNTs. Herein, the longitudinal extension of the CPP skeleton by the introduction of hexaphenylbenzene units towards polyarylated [n]CPPs is described. Further, the applicability of the Scholl reaction to selectively form graphenic sidewalls is demonstrated. The ring size and substitution patterns of the polyarylated [n]CPPs were varied to overcome strain‐induced side reactions during the oxidative cyclodehydrogenation and cyclic para‐hexa‐peri‐hexabenzocoronene trimers ([3]CHBCs) were selectively obtained. This concept is envisioned as an access to ultrashort carbon nanotubes subject to the condition that further benzene rings with the right connectivity will be inserted.     

Heptagon‐Embedded Pentacene: Synthesis,Structures, and Thin‐Film Transistors of Dibenzo[d,d′]benzo[1,2‐a:4,5‐a′]dicycloheptenes

This study presents a new class of conjugated polycyclic molecules that contain seven‐membered rings, detailing their synthesis, crystal structures and semiconductor properties. These molecules have a nearly flat C₆‐C₇‐C₆‐C₇‐C₆ polycyclic framework with a p‐quinodimethane core. With field‐effect mobilities of up to 0.76 cm² V^?1 s^?1 as measured from solution‐processed thin‐film transistors, these molecules are alternatives to the well‐studied pentacene analogues for applications in organic electronic devices.     

[Hmim]PF6 enhanced the extraction of polycyclic aromatic hydrocarbons from soil with the QuEChERS method

To detect, identify, and quantify the polycyclic aromatic hydrocarbons (PAHs) released into the environment, the PAHs need to be isolated from the soil matrix. In this work, a modified quick, easy, cheap, efficient, rugged and safe (QuEChERS) method with ionic liquid was combined with liquid chromatography to identify 16 selected PAHs in soil. Ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate ([Hmim]PF₆) was applied as an extractant component to enhance the process. The [Hmim]PF₆ content in acetonitrile (ACN) was optimized. The [Hmim]PF₆ modified QuEChERS method has the advantages defined by its name and a similar recovery to other extraction methods reported in the literature. Adding [Hmim]PF₆ may eliminate the co-extract proportion and achieve a more effective extraction. Compared with ACN alone, the matrix effect (ME) of ACN containing 5% [Hmim]PF₆ was reduced by approximately 35%. Additionally, the ME of using ACN containing [Hmim]PF₆ without a clean-up procedure was similar to that of using ACN followed by a clean-up procedure. The recoveries of the QuEChERS method implemented with [Hmim]PF₆ ranged from 75.19% to 100.98%. The limits of detection (LOD) and limits of quantification (LOQ) ranged from 0.86 to 4.51 µg/kg and from 2.87 to 15.13 µg/kg, respectively.     

Violation of Hund's rule in the lowest excited singlet-triplet pairs of dicyclohepta[cd,gh]pentalene and dicyclopenta[ef,kl]heptalene

Using the Pariser-Parr-Pople type MO method, the energy ordering of the lowest excited singlet-triplet pairs of the title molecules is examined by taking into account ample configuration interactions. In dicyclohepta[cd,gh]pentalene, it is shown that the lowest excited singlet state lies below the corresponding triplet state by about 6 kcal/mol. This violation of Hund's rule is ascribed entirely to the correlation effects brought about by spin polarization terms. Such a violation of Hund's rule is expected to occur in the lowest excited states of dicyclopenta[ef,kl]heptalene.     

Bis(pyrene)metal complexes of vanadium,niobium and titanium: isolable homoleptic pyrene complexes of transition metals

Reduction of VCl₃(THF)₃ (THF is tetrahydrofuran) and NbCl₄(THF)₂ by alkali metal pyrene radical anion salts in THF affords the paramagnetic sandwich complexes bis[(1,2,3,3a,10a,10b‐η)‐pyrene]vanadium(0), [V(C₁₆H₁₀)₂], and bis[(1,2,3,3a,10a,10b‐η)‐pyrene]niobium(0), [Nb(C₁₆H₁₀)₂]. Treatment of tris(naphthalene)titanate(2−) with pyrene provides the isoelectronic titanium species, isolated as an (18‐crown‐6)potassium salt, namely catena‐poly[[(18‐crown‐6)potassium]‐μ‐[(1,2‐η:1,2,3,3a,10a,10b‐η)‐pyrene]‐titanate(−I)‐μ‐[(1,2,3,3a,10a,10b‐η:6,7‐η)‐pyrene]], {[K(C₁₂H₂₄O₆)][Ti(C₁₆H₁₀)₂]}_n. The first two compounds have very similar packing, with neighboring molecules arranged orthogonally to one another, such that aromatic donor–acceptor interactions are likely responsible for the specific arrangement. The asymmetric unit contains a half‐occupancy metal center η⁶‐coordinated to one pyrene ligand, with the full M(pyrene)₂ molecule generated by a crystallographic inversion center. In the titanium compound, the cations and anions are in alternating contact throughout the crystal structure, in one‐dimensional chains along the [101] direction. As in the other two compounds, the asymmetric unit contains a half‐occupancy Ti atom η⁶‐coordinated to one pyrene ligand. Additionally, the asymmetric unit contains one half of an (18‐crown‐6)potassium cation, located on a crystallographic inversion center coincident with the K atom. The full formula units are generated by those inversion centers. In all three structures, the pyrene ligands are eclipsed and sandwich the metals in one of two inversion‐related sites. These species are of interest as the first isolable homoleptic pyrene transition metal complexes to be described in the scientific literature.     

Identification of naphtho [8.1.2 abc] coronene in the extract of diesel particulate matter by non-aqueous reversed-phase liquid chromatography coupled with UV multichannel detector

Summary Non-aqueous reversed-phase liquid chromatography coupled with a UV multichannel detector has been used for the identification of large polycyclic aromatic hydrocarbons in the extract from diesel engine particulate matter. The existence of naphtho[8,1,2,abc]coronene is first confirmed by this technique.     

Crystal Structures of trans-Tetrahydrotetrols of Benzo[a]pyrene and Chrysene: A Possible Structure-Activity Relationship in Quasi-Planar Bay-Region Polycyclic Aromatic Hydrocarbons

The molecular structures of two racemic trans-tetrahydrotetrols formed by hydrolysis of the (±)anti-7,8-dihydroxy-9,10-epoxy-7,8,9,10-tetrahydro derivatives of the strong carcinogen benzo[a]pyrene and the weak carcinogen chrysene have been determined by X-ray crystallographic methods.³ Focusing on the (+)isomers, the stereochemical features of the two tetrols are discussed in detail to determine structural differences, which can be related to the different biological activity of their parent hydrocarbons, since they provide a model for the hydrocarbon moiety in the major PAH-DNA adduct. As a result of this study, a tentative correlation can be stated between biological activity of quasi-planar bay-region PAHs and the presence of structural features, which can decrease the steric hindrance of the aromatic skeleton and the other hydroxy groups on the pseudo-axial O4, which mimics the position of the covalent bond to DNA. The significant structural features seem to be an out-of-plane distortion with a negative torsion angle at the bay region and a half chair conformation of the saturated ring distorted toward the envelope with C8 at the tip as in BPT, in addition to the axial and pseudo-axial conformations of the hydroxy groups at C9 and C10 due to the near bay region. They may be considered generated by trans-opening of the oxirane ring in an anti-diol epoxide biologically active because it is highly strained. The strains, derived from the activation of bay-region PAHs with a negative torsion angle, seem greater in an anti-diol epoxide relative to the syn-isomer. Thus, when the strains are released, the derived trans-tetrol occurs with structural features, which seem to better fit the target. As a consequence, the presence of a methyl group at a bay region should increase the biological activity of a PAH, imposing greater strains to the structure of the anti-diol epoxide.     

Synthesis and photovoltaic properties of two‐dimensional copolymers based on novel benzothiadiazole and quinoxaline acceptors with conjugated dithienylbenzothiadiazole pendants

Two novel acceptors of benzo[c][1,2,5]thiadiazole and quinoxaline with conjugated dithienylbenzothiadiazole pendants were first designed and synthesized for building efficient photovoltaic copolymers. Based on benzo[1,2‐b;3,4‐b′]dithiophene donors and the two acceptors, two new copolymers have been prepared by Stille coupling polymerization. The resulting copolymers were characterized by ¹H NMR, gel permeation chromatography, and thermogravimetric analysis. UV–Visible absorption and cyclic voltammetry measurements indicated that the two copolymers possessed strong and broad absorption in the range of 300–700 nm, and deep‐lying energy levels of highest occupied molecular orbitals. The polymer photovoltaic devices based on benzo[c][1,2,5]thiadiazole‐based copolymer/phenyl‐C₇₁‐butyric acid methyl ester exhibited a power conversion efficiency of 2.42%, attributed to its relatively better light‐harvesting ability and active film morphology. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 668–677     

Direct determination of benzo[a]pyrene in water samples by a gold nanoparticle-based solid phase extraction method and laser-excited time-resolved Shpol'skii spectrometry

The strong affinity between polycyclic aromatic hydrocarbons (PAH) and the surface of gold colloids is investigated to device an extraction method for water samples. Within the 20-100 nm particle diameter range, the 20 nm gold nanoparticles showed the best extraction efficiencies for all the studied analytes. The new approach is combined to laser-excited time-resolved Shpol'skii spectrometry for the direct analysis of benzo[a]pyrene in drinking water samples. For a 500 μL sample volume, the analytical figures of merit demonstrate precise and accurate analysis at the parts-per-trillion level. The extraction efficiencies are statistically equivalent to 100% with relative standard deviations lower than 2%. The average recoveries were varied from 87.5% to 96.5% for different concentration of analytes. The simplicity of the experimental procedure, the low analysis cost, and the excellent analytical figures of merit demonstrate the potential of this approach for routine analysis of drinking water samples.     

Synthesis of aromatic polyethers by Scholl reaction. V. Synthesis and polymerization of 1,3-bis[4-(1-naphthoxy) benzoyl]benzene, 1,4-bis[4-(1-naphthoxy)benzoyl]benzene,bis[4-(1-naphthoxy)phenyl]methane, 1,3-bis[4-(1-naphthoxy) phenylmethyl]benzene,and 1,4-bis-[4-(1-naphthoxy)phenylmethyl]benzene

This article describes the synthesis and the cation-radical polymerization (Scholl reaction) of 1,3-bis[4-(1-naphthoxy) benzoyl] benzene ( 6 ) and 1,4-bis[4-(1-naphthoxy) benzoyl]- benzene ( 7 ) initiated by FeCI₃. This polymerization produced poly(ether ether ketone ketone)s (PEEKK) of number average molecular weight (M?_n) up to 5400 g/mol. The synthesis of bis[4-(1-naphthoxy) phenyl] methane ( 8 ), 1,3-bis[4-(1-napthoxy) phenylmethyl] benzene ( 9 ), and 1,4-bis[4-(1-naphthoxy) phenylmethyl] benzene ( 10 ) are also described. Polyethers of M?_n up to 15400 g/mol at a FeCl₃/monomer molar ratio of 2/1 were obtained. An increased polymerizability of the monomers 9 and 10 containing two CH₂ groups versus that of the corresponding monomers containing two carbonyl groups ( 6 and 7 ) was observed. This enhanced polymerizability was explained based on the increased nucleophilicity of monomers 9 and 10 .