Direct analysis of oligosaccharides and alpha hydroxy acids in fruits using electrosonic spray ionization mass spectrometry

Electrosonic spray ionization (ESSI) is a derivative technique of electrospray ionization (ESI) for mass spectrometry (MS) in which droplets are charged in the course of sonic spray. In this study, we applied ESSI MS to direct analysis of oligosaccharides and alpha hydroxy acids (AHAs) in fruits. The components were extracted from fruit fleshes by a feasible method prior to ESSI MS analysis, but the fruit juices were analyzed without further pretreatment. The results demonstrate that mainly alkali metal adducts of oligosaccharides are favorably produced in positive ion mode, while deprotonated AHAs and oligosaccharides are produced in negative ion mode. Compared with mass spectra obtained using electrospray droplet impact/secondary ion mass spectrometry (EDI/SIMS), mass spectra using ESSI make the identification of oligosaccharides more straightforward in positive ion mode than in negative ion mode.     

Vibrating tip spray ionization mass spectrometry for direct sample analysis

In this work, a vibrating tip spray ionization source was developed for direct mass spectrometric analysis of raw samples under voltage‐free condition. A solid tip was mounted on a vibrator, and the solid tip was placed on the front of MS inlet. Liquid, viscous, and bulk solid samples could be directly loaded on the tip‐end surface, and then a drop of solvent at microliter level was subsequently loaded on the tip for dissolution and extraction of analytes, and a vibrator was then started to atomize and ionize the analytes under ambient condition. We demonstrated vibrating tip spray mass spectrometry in various applications, including food safety, pharmaceutical analysis, and forensic science. Furthermore, in situ analysis of biological tissues and in vivo analysis of living plants were conveniently performed, due to voltage‐free. Different vibration frequencies and solvent compositions were investigated. The analytical performances, including sensitivity, reproducibility, and linear range, were investigated. The ionization process and mechanism were also discussed in this work.     

Sonic spray ionization applied to liquid chromatography/mass spectrometry analysis of endocrine-disrupting chemicals in environmental water samples

A sonic spray ionization liquid chromatography/mass spectrometry (LC/SSI-MS) procedure combined with off-line solid-phase extraction was optimized for the analysis of 20 endocrine-disrupting chemicals (EDCs) in water samples. Method development included a comparison of the novel sonic spray ionization (SSI) with more traditional ion sources, i.e. pneumatically assisted electrospray ionization (ESI) and atmospheric pressure chemical ionization (APCI). It was demonstrated that SSI and ESI spectra were very similar, but were more prone to the formation of solvent cluster ions as compared with APCI spectra. This phenomenon was most prominent for SSI and resulted in an increased chemical background in full-scan mass spectra. However, this chemical noise did not affect the overall sensitivity of SSI and ESI. After optimization of LC and MS parameters, the LC/SSI-MS method was validated. Recoveries ranged from 76.3 up to 113.4% for all compounds. Limits of detection (LOD) and quantitation (LOQ) were established between 3.0 and 11.5 ng/L and 9.9 and 38.0 ng/L, respectively. Within-day (n = 5) and between-day (n = 5) reproducibility were investigated at three levels and ranged from 3.3-16.5% and 7.6-19.2%, respectively. Eight-point calibration curves were established and showed linearity for all compounds (r(2) > 0.987) over a linear dynamic range of 10-10 000 ng/L.     

Direct drug analysis from oral fluid using medical swab touch spray mass spectrometry

Fourteen common drugs of abuse were identified in spiked oral fluid (ng mL⁻¹ levels), analyzed directly from medical swabs using touch spray mass spectrometry (TS-MS), exemplifying a rapid test for drug detection. Multiple stages of mass analysis (MS² and MS³) provided identification and detection limits sought by international forensic and toxicological societies, Δ⁹-THC and buprenorphine excluded. The measurements were made using a medical swab as both the sampling probe and means of ionization. The adaptation of medical swabs for TS-MS analysis allows non-invasive and direct sampling of neat oral fluid. Data acquisition was rapid, seconds per drug, and MS³ ensured reliable identification of illicit drugs. The reported data were acquired to investigate (i) ionization of common drugs from commercial swabs, (ii) ion intensity over spray duration, and (iii) dynamic range, all as initial steps in development of a quantitative method. The approach outlined is intended for point-of-care drug testing using oral fluid in clinical applications as well as in situ settings, viz. in forensic applications. The proof-of-concept results presented will require extension to other controlled substances and refinement in analytical procedures to meet clinical/legal requirements.     

Direct surface analysis of fungal species by matrix-assisted laser desorption/ionization mass spectrometry

In this study various methods of sample preparation and matrices were investigated to determine optimum collection and analysis criteria for fungal analysis by matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). Intact spores and/or hyphae of Aspergillus niger, Rhizopus oryzae, Trichoderma reesei and Phanerochaete chrysosporium were analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS). The fungal samples were applied to the MALDI sample target as untreated, sonicated, or acid/heat treated samples, or blotted directly from the fungal culture with double-stick tape. Ferulic acid or sinapinic acid matrix solution was layered over the dried samples and analyzed by MALDI-MS. Statistical analysis showed that simply using double-stick tape to collect and transfer to a MALDI sample plate typically worked as well as the other preparation methods, and required the least sample handling.     

Direct analysis of biological samples using extractive electrospray ionization mass spectrometry (EESI-MS)

Mass spectrometry (MS) is one of the most widely used techniques for the analysis of biological samples. In the past decade, a novel improvement in MS was the invention of ambient ionization which stands out owing to its unique capability of direct analysis of complex samples with no or minimal pretreatment. In this review, extractive electrospray ionization (EESI), a representative ambient ionization technique, is introduced focusing on its mechanism, instrumentation, and applications in biological analysis. EESI uses a traditional ESI channel to produce primary ions which subsequently ionize neutral chemicals from the sample introduction channel through an online extraction process. When analyzing biological samples, EESI has advantages of rapid analysis, high matrix tolerance, and the ability to perform in vivo analysis. According to previous studies, EESI is able to directly analyze various chemicals in complex biological specimens in liquid, gas, and solid states. EESI can provide a sensitive and selective measurement of biological samples for both qualitative and quantitative purposes. Therefore, it is anticipated that EESI will have promising applications, especially in fields which require the fast and/or in vivo analysis of biological samples with complicated matrixes.     

Ultrasonication-assisted spray ionization mass spectrometry for the analysis of biomolecules in solution

In this paper, we describe a novel technique—ultrasonication-assisted spray ionization (UASI)—for the generation of singly charged and multiply charged gas-phase ions of biomolecules (e.g., amino acids, peptides, and proteins) from solution; this method employs a low-frequency ultrasonicator (ca. 40 kHz) in place of the high electric field required for electrospray ionization. When a capillary inlet is immersed into a sample solution within a vial subjected to ultrasonication, the solution is continually directed to the capillary outlet as a result of ultrasonication-assisted capillary action; an ultrasonic spray of the sample solution is emitted at the outlet of the tapered capillary, leading to the ready generation of gas-phase ions. Using an ion trap mass spectrometer, we found that singly charged amino acid and multiply charged peptides/proteins ions were generated through this single-step operation, which is both straightforward and extremely simple to perform. The setup is uncomplicated: only a low-frequency ultrasonicator and a tapered capillary are required to perform UASI. The mass spectra of the multiply charged peptides and proteins obtained from sample solutions subjected to UASI resemble those observed in ESI mass spectra.     

Direct analysis of herbal powders by pipette-tip electrospray ionization mass spectrometry

Conventional electrospray ionization mass spectrometry (ESI-MS) is widely used for analysis of solution samples. The development of solid-substrate ESI-MS allows direct ionization analysis of bulky solid samples. In this study, we developed pipette-tip ESI-MS, a technique that combines pipette tips with syringe and syringe pump, for direct analysis of herbal powders, another common form of samples. We demonstrated that various herbal powder samples, including herbal medicines and food samples, could be readily online extracted and analyzed using this technique. Various powder samples, such as Rhizoma coptidis, lotus plumule, great burdock achene, black pepper, Panax ginseng, roasted coffee beans, Fructus Schisandrae Chinensis and Fructus Schisandrae Sphenantherae, were analyzed using pipette-tip ESI-MS and quality mass spectra with stable and durable signals could be obtained. Both positive and negative ion modes were attempted and various compounds including amino acids, oligosaccharides, glycosides, alkaloids, organic acids, ginosensides, flavonoids and lignans could be detected. Principal component analysis (PCA) based on the acquired mass spectra allowed rapid differentiation of closely related herbal species.     

Direct and quantitative analysis of underivatized acylcarnitines in serum and whole blood using paper spray mass spectrometry

A simple protocol for rapid quantitation of acylcarnitines in serum and whole blood has been developed using paper spray mass spectrometry. Dried serum and whole blood containing a mixture of ten acylcarnitines at various concentrations were analyzed as spots from paper directly without any sample pretreatment, separation, or derivatization. The composition of the spray solvent was found to be a critical factor: for serum samples, spray solvent of methanol/water/formic acid (80:20:0.1) gave the best signal intensity while for blood samples which contain more matrix components, acetonitrile/water (90:10) was a much more suitable spray solvent. For the paper type and size used, 0.5 μL of sample provided an optimal signal for both serum and whole blood samples. For quantitative profiling, the limits of quantitation obtained from both serum and blood were much lower than the clinically validated cutoff values for diagnosis of fatty acid oxidation disorders in newborn screening. Linearity (R(2) > 0.95) and reproducibility (RSD ~10 %) were achieved in the concentration ranges from 100 nM to 5 μM for the C2 acylcarnitine, and for other acylcarnitines, these values were from 10 to 500 nM. Acylcarnitine profiles offer an effective demonstration of the fact that paper spray mass spectrometry is an appropriate, simple, rapid method with high sensitivity and high reproducibility applicable to newborn screening tests.     

Multiphoton ionization spectroscopy in surface analysis and laser desorption mass spectrometry

The application of resonance-enhanced multiphoton ionization (REMPI) spectroscopy for the ultrasensitive detection of molecules originating from laser desorption experiments performed on a variety of substrates is reviewed. Laser-induced desorption from surfaces is capable of producing intact gas-phase molecules, even from polar, non-volatile, high-molecular-weight and thermally labile substances. REMPI is a highly efficient and optically selective ionization method, which, coupled with laser desorption allows the direct chemical analysis of complex mixtures, without the need for previous sample purification and separation steps. The use of REMPI spectroscopy is discussed in two contexts: (1) for the direct chemical analysis of complex mixtures, e.g., environmental samples, by laser desorption/laser postionization mass spectrometry and (2) for measurements of internal state distribution of molecules laser-desorbed from sub-monolayers surface films to gain insight into the laser desorption mechanism.Presented at the 13th International Symposium on Microchemical Techniques (ISM), held in Montreux, Switzerland, May 16–20,1994     

Biogenic aldehyde determination by reactive paper spray ionization mass spectrometry

Ionization of aliphatic and aromatic aldehydes is improved by performing simultaneous chemical derivatization using 4-aminophenol to produce charged iminium ions during paper spray ionization. Accelerated reactions occur in the microdroplets generated during the paper spray ionization event for the tested aldehydes (formaldehyde, n-pentanaldehyde, n-nonanaldehyde, n-decanaldehyde, n-dodecanaldehyde, benzaldehyde, m-anisaldehyde, and p-hydroxybenzaldehyde). Tandem mass spectrometric analysis of the iminium ions using collision-induced dissociation demonstrated that straight chain aldehydes give a characteristic fragment at m/z 122 (shown to correspond to protonated 4-(methyleneamino)phenol), while the aromatic aldehyde iminium ions fragment to give a characteristic product ion at m/z 120. These features allow straightforward identification of linear and aromatic aldehydes. Quantitative analysis of n-nonaldehyde using a benchtop mass spectrometer demonstrated a linear response over 3 orders of magnitude from 2.5 ng to 5 μg of aldehyde loaded on the filter paper emitter. The limit of detection was determined to be 2.2 ng for this aldehyde. The method had a precision of 22%, relative standard deviation. The experiment was also implemented using a portable ion trap mass spectrometer.     

Direct analysis of alkaloid profiling in plant tissue by using matrix-assisted laser desorption/ionization mass spectrometry

A method for the direct determination of alkaloid profiling in plant tissues by using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) was developed. The alkaloid profiles of the herbs were obtained without the need for complicated sample preparation. Experimental results demonstrated that the direct MALDI-TOFMS analysis allowed rapid and reliable characterization of the components in plant tissues. Four commonly used Chinese medicinal herbs were studied, including Aconitum Carmichaeli Debx. (Fuzi in Chinese) and Processed Fuzi, for herb differentiation and explanation of the significant difference in their toxicities. The direct analysis method proved valuable for the preliminary study of plant component profiles. The rapid collection of information from the direct analysis on plant tissues could be valuable for supporting the discovery of new compounds and for the quality control of medicinal herbs.     

Rapid analysis of abused drugs using nanostructured silicon surface assisted laser desorption/ionization mass spectrometry

This study developed a rapid, sensitive, and matrix-free method for the determination of amphetamine (AMP), methamphetamine (MA), codeine (COD), morphine (MOR), and ketamine (KET) using nanostructured silicon surface assisted laser desorption/ionization mass spectrometry (nSi-MS). The nanostructured silicon (nSi) chip used in this study was created by employing the metal-assisted etching process. Drug standard tests were applied to the nSi chip platform to evaluate the nSi-MS performance, including detection sensitivity, limit of detection, linearity, and repeatability. Real urine samples obtained from drug addict detainees were directly applied to the nSi chip for drug analysis. By observing the nSi-MS spectra, the target drug peaks can be identified; and an antibody pull-down assay was performed to confirm the specificity of the detected targets. nSi-MS drug quantification was assayed, yielding comparable results with those from using the GC-MS approach. The advantages of applying nSi-MS to analyze AMP, MA, COD, MOR, and KET in the urine of addicts are simple, extremely small urine volumes (～10 μL), and a fast analysis procedure (<15 minutes).     

Direct chemical ionization mass spectrometry of short-chain polysaccharides.

Underivatized short-chain polysaccharides such as two inulins from different plants containing up to 35-40 monosaccharide units with molecular weights of up to 6500 Da and dextran T 1.5 containing up to 16-20 monosaccharide units with molecular weights of up to 3200 Da have been investigated by direct chemical ionization. Under soft ionization conditions such as ammonia chemical ionization and reduced ion-source temperature, it was possible to obtain spectra of the native polysaccharides showing dominant ion series corresponding to ammonia adduct ions of oligosaccharides, and also ion series corresponding to ammonia adduct ions of anhydro-oligosaccharides.     

Direct tissue analysis using matrix-assisted laser desorption/ionization mass spectrometry: practical aspects of sample preparation

Practical guidelines for the preparation of tissue sections for direct analysis by matrix-assisted laser desorption/ionization (MALDI) mass spectrometry are presented. Techniques for proper sample handling including tissue storage, sectioning and mounting are described. Emphasis is placed on optimizing matrix parameters such as the type of matrix molecule used, matrix concentration, and solvent composition. Several different techniques for matrix application are illustrated. Optimal instrument parameters and the necessity for advanced data analysis approaches with regards to direct tissue analysis are also discussed.