Nanocavity-assisted single-crystalline Ti3+ self-doped blue TiO2(B) as efficient cocatalyst for high selective CO2 photoreduction of g-C3N4

Two-dimensional (2D) graphitic carbon nitride (g-C₃N₄) has invoked significant interest for photocatalytic applications for its excellent features such as high surface area, visible light absorption, and easy transportation of photogenerated charge carriers, but the most reported g-C₃N₄ show relatively low photoactivity due to inferior conductivity and rapid recombination of carriers. These can be overcome by inducing porosity in g-C₃N₄, followed by exfoliation and combining with other materials. Herein, we synthesize nanocavity-assisted oxygen-deficient Ti³⁺ self-doped blue TiO₂(B) nanorods (BT) and integrate them on exfoliated porous g-C₃N₄ (PCN). The synthesized materials are tested for photocatalytic conversion of CO₂ into solar fuels (H₂, CO, and CH₄). The fabricated BT/PCN heterostructures exhibit higher photocatalytic CO₂ conversion activity and 92% CO-evolving selectivity than BT and PCN. The enhancement in activity of BT/PCN can be attributed to the efficient separation and transportation of charge carriers, facilitated by the unique properties of BT, PCN, and their synergistic interactions. We believe that these results can contribute to the improvement of cost-effectiveness, feasibility, and overall performance for real photocatalytic systems.     

g-C3N4碳位掺杂电学及光学性质的分析

使用第一性原理研究了C位掺杂的g-C₃N₄的电学性质和光学性质,掺杂原子为B、P、S. g-C₃N₄有C1位和C2 位两种对称位碳原子,其中在C1 位上的掺杂易于C2 位,掺杂体系也较C2 位稳定. 相比于磷和硫在g-C₃N₄上的掺杂,硼掺杂最易于进行. 掺杂后体系的晶体结构之间差别较大,这与掺杂原子的大小以及电负性有关. 由轨道布居分布可知,掺杂后的硼、磷、硫原子价电子发生了变化,表明掺杂原子发生了杂化,与相邻原子以强的共价键相连. 掺杂原子与被取代的碳原子之间的价电子差异导致了能带的增加. 在原来的体系中,掺杂后的体系出现了一条新的能带,因此导致实际带隙下降,表明了掺杂后的体系导电性能增强. 对纯g-C₃N₄及掺杂g-C₃N₄的光学性质分析表明,g-C₃N₄的光学吸收主要在紫外光区,掺杂磷和硫后对g-C₃N₄的光吸收波长范围无改变,掺杂硼后的g-C₃N₄光吸收不再局限于紫外光区,而且延伸至可见光区和红外光区,并在红外光区有很强的吸收,表明g-C₃N₄掺杂硼后能大大地提高光催化效率. 电子能量损失光谱和光导率谱以及介电常数都佐证了上述观点.     

Recent advances of doped graphite carbon nitride for photocatalytic reduction of CO2: a review

CO₂ is the main gas that causes the “greenhouse effect,” and it is also a rich carbon resource. The photocatalytic conversion of CO₂ into fuel not only relieves the pressure brought by the environment pollution, but also is promising way to achieve the carbon cycle and address the problem of energy shortage. It is essential to design efficient photocatalysts for the practical application of photocatalytic CO₂ conversion. Doped graphite carbon nitride (g-C₃N₄) has a reduced bandgap, increased light absorption and effective charge separation and transfer efficiency. Recently, its application has been extended to the field of photocatalytic reduction of CO₂. In this review, we first discuss the basic principles of photocatalytic reduction of CO₂, then focus on the application of g-C₃N₄ doped with different elements in the photocatalytic reduction of CO₂ in recent years, and then summarize different doping methods. Finally, challenges and opportunities are presented, and potential solutions are proposed for future research.

     

Density functional theory study on sensing properties of g-C3N4 sheet to atmospheric gasses: Role of zigzag and armchair edges

The ability of the polymer-based graphitic carbon nitride (g-C₃N₄) as a gas sensor toward NO, NO₂, CO, CO₂, SO₂, SO₃, and O₂ gasses is assessed using density functional theory (DFT) calculations in terms of energetic and electronic transport characteristics. In particular, this study is aimed to explore the role of zigzag and armchair edges of the g-C₃N₄ sheet on sensing performances. The electronic properties of adsorption systems, such as Bader charge analysis, band gaps, work function, and density of states (DOS), are used to understand the interaction between the adsorbed gas molecules and the g-C₃N₄ sheet. Our calculated results indicate that SOx (SO₃ and SO₂) gasses have higher adsorption energies on the g-C₃N₄ sheet than other gasses. Furthermore, the transport properties, such as current–voltage (I-V) and resistance-voltage (R-V) curves along the zigzag and armchair directions are calculated using the non-equilibrium Green's function (NEGF) method to understand the performance of the g-C₃N₄ sheet as a prominent conductive/resistive sensor. The I-V/R-V results indicate that the zigzag g-C₃N₄ sheet has excellent sensing ability toward SOx gasses at low applied voltages. However, the presence of H₂O degrades the sensing performance of the armchair g-C₃N₄ sheet. Theoretical recovery time has also been calculated to evaluate the reusability of g-C₃N₄ sheet-based gas sensors. Our results reveal that the zigzag g-C₃N₄ sheet-based sensing device has a remarkably high sensitivity (>300%) and selectivity toward SOx gasses and has the potential to work in a complex environment.     

In Situ Synthesis of Cu3P/P-Doped g-C3N4 Tight 2D/2D Heterojunction Boosting Photocatalytic H2 Evolution†

Heterojunction design in a two-dimensional (2D) fashion has been deemed beneficial for improving the photocatalytic activity of g-C₃N₄ because of the promoted interfacial charge transfer, yet still facing challenges. Herein, we construct a novel 2D/2D Cu₃P nanosheet/P-doped g-C₃N₄ (PCN) nanosheet heterojunction photocatalyst (PCN/Cu₃P) through a simple in-situ phosphorization treatment of 2D/2D CuS/g-C₃N₄ composite for photocatalytic H₂ evolution. We demonstrate that the 2D lamellar structure of both CuS and g-C₃N₄ could be well reserved in the phosphorization process, while CuS and g-C₃N₄ in-situ transformed into Cu₃P and PCN, respectively, leading to the formation of PCN/Cu₃P tight 2D/2D heterojunction. Owing to the large contact area provided by intimate face-to-face 2D/2D structure, the PCN/Cu₃P photocatalyst exhibits significantly enhanced charge separation efficiency, thus achieving a boosted visible-light-driven photocatalytic behavior. The highest rate for H₂ evolution reaches 5.12 μmol·h^–1, nearly 24 times and 368 times higher than that of pristine PCN and g-C₃N₄, respectively. This work represents an excellent example in elaborately constructing g-C₃N₄-based 2D/2D heterostructure and could be extended to other photocatalyst/co-catalyst system.      

氮缺陷对GaN/g-C3N4异质结电子结构和光学性能影响的第一性原理研究

基于密度泛函理论下的第一性原理平面波超软赝势方法,研究了单层GaN、g-C₃N₄、GaN/g-C₃N₄异质结及3种氮缺陷GaN/g-C₃N₄-V_XN （X=1、2、3）异质结的稳定性、电子结构、功函数及光学性能。计算结果表明,GaN/g-C₃N₄异质结体系晶格失配率极低（0.8%）,属于完全共格。与单层g-C₃N₄相比,GaN/g-C₃N₄和GaN/g-C₃N₄-V_XN （X=1、2、3）异质结的导带向低能方向偏移,价带上移,从而导致带隙减小,且态密度均显示出轨道杂化现象。GaN/g-C₃N₄和GaN/g-C₃N₄-V_XN （X=1、2、3）异质结在界面处均形成了电势差,在其内部形成了从g-C₃N₄层指向GaN层的内置电场。GaN/g-C₃N₄-V_1N异质结的界面电势差值最大且红移现象最为明显,表明GaN/g-C₃N₄-V_1N异质结相较其他2个N缺陷异质结光学性能最好。氮缺陷的引入在不同程度上提高了GaN/g-C₃N₄异质结在红外光区域的光吸收能力。     

氮缺陷对GaN/g-C3N4异质结电子结构和光学性能影响的第一性原理研究

基于密度泛函理论下的第一性原理平面波超软赝势方法,研究了单层GaN、g-C₃N₄、GaN/g-C₃N₄异质结及3种氮缺陷GaN/g-C₃N₄-V_XN(X=1、2、3)异质结的稳定性、电子结构、功函数及光学性能。计算结果表明,GaN/g-C₃N₄异质结体系晶格失配率极低(0.8%),属于完全共格。与单层g-C₃N₄相比,GaN/g-C₃N₄和GaN/g-C₃N₄-V_XN(X=1、2、3)异质结的导带向低能方向偏移,价带上移,从而导致带隙减小,且态密度均显示出轨道杂化现象。GaN/g-C₃N₄和GaN/g-C₃N₄-V_XN(X=1、2、3)异质结在界面处均形成了电势差,在其内部形成了从g-C₃N₄层指向GaN层的内置电场。GaN/g-C₃N₄-V_1N异质结的界面电势差值最大且红移现象最为明显,表明GaN/g-C₃N₄-V_1N异质结相较其他2个N缺陷异质结光学性能最好。氮缺陷的引入在不同程度上提高了GaN/g-C₃N₄异质结在红外光区域的光吸收能力。     

Two-dimensional g-C3N4 nanosheets-based photo-catalysts for typical sustainable processes

Graphitic carbon nitride (g-C₃N₄) has been widely studied as a visible light responsive photocatalyst in recent years, due to its facile synthesis, low cost, high stability, and appropriate bandgap/band positions. In this review, we firstly introduce and compare various exfoliation approaches of bulk g-C₃N₄ into ultrathin g-C₃N₄ nanosheets. Then, many modification strategies of g-C₃N₄ nanosheets are also reviewed, including heterojunction construction, doping, defect control, and structure design. Thereafter, the charge transfer mechanism in g-C₃N₄ nanosheets based heterojunctions is present, e.g., Z-scheme, S-scheme and other forms. Besides, the photocatalytic applications of g-C₃N₄ nanosheets based photocatalysts are summarized including environmental remediation, energy generation and storage, organic synthesis, and disinfection. This review ends with a summary and some perspectives on the challenges and new directions in exploring g-C₃N₄ nanosheets-based photocatalysts.     

The effects of strain and charge doping on the electronic properties of graphitic C3N5

Inspired by the successful synthesis of a new graphitic C₃N₅ (termed as g-C₃N₅), we systematically investigate its geometry and electronic properties. The layered g-C₃N₅ has a nanopore diameter of 13.8 Å. It is a direct semiconductor with a band gap of 0.53 eV. The influence of strains on the electronic properties is considered. When applying uniaxial or biaxial compressive strain, the band gap can decrease until zero, resulting in a semiconductor-to-metal transition. The effects of charge doping on the electronic properties are also studied. With the increase of negative charge doping, the band gap becomes narrow until zero, indicating that a semiconductor-to-metal transition occurs as well. In addition, the electronic properties of g-C₃N₅ can be tuned by both strain and charge doping. Thus, we provide a fundamental understanding of g-C₃N₅, and its semiconductor-to-metal transition could be possibly experimentally approached by strain and charge doping, extending the electronic usage of g-C₃N₅.     

Exploring recent advances in silver halides and graphitic carbon nitride-based photocatalyst for energy and environmental applications

Engineering visible light active photocatalytic systems for renewable energy production and environmental remediation has always been a promising technology to counter overall energy demands and pollution challenges. As a fascinating conjugated polymer graphitic carbon nitride (g-C₃N₄) has been developed as a hotspot in the research field as a metal-free semiconducting material with the appealing band gap of 2.7 eV. Recently, g-C₃N₄ has gained tremendous interest in photocatalytic wastewater abatement as well as for hydrogen (H₂) generation, carbon dioxide (CO₂) reduction, and pollutant degradation, under exposure to visible light. Plasmonic silver halides (AgX) such as AgCl, AgBr, and AgI as plasmonic photocatalyst have received immense research interest owing to their escalating photocatalytic efficacy and strong surface plasmon resonance effect (SPR). AgX is the photosensitive, broad bandgap semiconducting materials with effectual antimicrobial properties. This review summarizes the heterostructure of carbonaceous g-C₃N₄ with plasmonic AgX, to reduce the recombination of photo-generated charge carriers, thus enhancing the natural light absorption. g-C₃N₄ grafted AgX nanoarchitectures can be utilized for several potential applications, for instance, overall water splitting (OWS), CO₂ conversion to hydrocarbon fuels, pollutant exclusion, and antibacterial disinfection. This review focuses on the evolution of g-C₃N₄ as well as AgX, facile, and synthetic routes for fabrication of g-C₃N₄ tailored AgX, construction of nano-junctions (AgX/g-C₃N₄) with various photocatalytic applications. Finally, we provided a viewpoint of current hassles and some perceptions of novel trends in this exciting as well as developing research arena.     

A Targeted Review of Current Progress,Challenges and Future Perspective of g-C3N4 based Hybrid Photocatalyst Toward Multidimensional Applications

The increasing demand for searching highly efficient and robust technologies in the context of sustainable energy production totally rely onto the cost-effective energy efficient production technologies. Solar power technology in this regard will perceived to be extensively employed in a variety of ways in the future ahead, in terms of the combustion of petroleum-based pollutants, CO₂ reduction, heterogeneous photocatalysis, as well as the formation of unlimited and sustainable hydrogen gas production. Semiconductor-based photocatalysis is regarded as potentially sustainable solution in this context. g-C₃N₄ is classified as non-metallic semiconductor to overcome this energy demand and enviromental challenges, because of its superior electronic configuration, which has a median band energy of around 2.7 eV, strong photocatalytic stability, and higher light performance. The photocatalytic performance of g-C₃N₄ is perceived to be inadequate, owing to its small surface area along with high rate of charge recombination. However, various synthetic strategies were applied in order to incorporate g-C₃N₄ with different guest materials to increase photocatalytic performance. After these fabrication approaches, the photocatalytic activity was enhanced owing to generation of photoinduced electrons and holes, by improving light absorption ability, and boosting surface area, which provides more space for photocatalytic reaction. In this review, various metals, non-metals, metals oxide, sulfides, and ferrites have been integrated with g-C₃N₄ to form mono, bimetallic, heterojunction, Z-scheme, and S-scheme-based materials for boosting performance. Also, different varieties of g-C₃N₄ were utilized for different aspects of photocatalytic application i. e., water reduction, water oxidation, CO₂ reduction, and photodegradation of dye pollutants, etc. As a consequence, we have assembled a summary of the latest g-C₃N₄ based materials, their uses in solar energy adaption, and proper management of the environment. This research will further well explain the detail of the mechanism of all these photocatalytic processes for the next steps, as well as the age number of new insights in order to overcome the current challenges.     

Interfacial engineering of graphitic carbon nitride (g-C3N4)-based metal sulfide heterojunction photocatalysts for energy conversion: A review

As one of the most appealing and attractive technologies, photocatalysis is widely used as a promising method to circumvent the environmental and energy problems. Due to its chemical stability and unique physicochemical, graphitic carbon nitride (g-C₃N₄) has become research hotspots in the community. However, g-C₃N₄ photocatalyst still suffers from many problems, resulting in unsatisfactory photocatalytic activity such as low specific surface area, high charge recombination and insufficient visible light utilization. Since 2009, g-C₃N₄-based heterostructures have attracted the attention of scientists worldwide for their greatly enhanced photocatalytic performance. Overall, this review summarizes the recent advances of g-C₃N₄-based nanocomposites modified with transition metal sulfide (TMS), including (1) preparation of pristine g-C₃N₄, (2) modification strategies of g-C₃N₄, (3) design principles of TMS-modified g-C₃N₄ heterostructured photocatalysts, and (4) applications in energy conversion. What is more, the characteristics and transfer mechanisms of each classification of the metal sulfide heterojunction system will be critically reviewed, spanning from the following categories: (1) Type I heterojunction, (2) Type II heterojunction, (3) p-n heterojunction, (4) Schottky junction and (5) Z-scheme heterojunction. Apart from that, the application of g-C₃N₄-based heterostructured photocatalysts in H₂ evolution, CO₂ reduction, N₂ fixation and pollutant degradation will also be systematically presented. Last but not least, this review will conclude with invigorating perspectives, limitations and prospects for further advancing g-C₃N₄-based heterostructured photocatalysts toward practical benefits for a sustainable future.     

Defect-assisted surface modification enhances the visible light photocatalytic performance of g-C3N4@C-TiO2 direct Z-scheme heterojunctions

To increase the number of active sites and defects in TiO₂ and promote rapid and efficient transfer of photogenerated charges, a g-C₃N₄@C-TiO₂ composite photocatalyst was prepared via in situ deposition of g-C₃N₄ on a carbon-doped anatase TiO₂ surface. The effects of carbon doping state and surface modification of g-C₃N₄ on the performance of g-C₃N₄@C-TiO₂ composite photocatalysts were studied by X-ray diffraction, X-ray photoelectron spectroscopy, UV-visible diffuse-reflectance spectroscopy, transmission electron microscopy, electrochemical impedance spectroscopy, photoluminescence, and electron paramagnetic resonance. With increasing carbon doping content, the carbon doping state in TiO₂ gradually changed from gap to substitution doping. Although the number of oxygen vacancies gradually increased, the degradation efficiency of g-C₃N₄@C-TiO₂ for RhB (phenol) initially increased and subsequently decreased with increasing carbon content. The g-C₃N₄@10C-TiO₂ sample exhibited the highest apparent reaction rate constant of 0.036 min^?1 (0.039 min^?1) for RhB (phenol) degradation, which was 150 (139), 6.4 (6.8), 2.3 (3), and 1.7 (2.1) times higher than that of pure TiO₂, 10C-TiO₂, g-C₃N₄, and g-C₃N₄@TiO₂, respectively. g-C₃N₄ was grown in situ on the surface of C-TiO₂ by surface carbon hybridization and bonding. The resultant novel g-C₃N₄@C-TiO₂ photocatalyst exhibited direct Z-scheme heterojunctions with non-local impurity levels. The high photocatalytic activity can be attributed to the synergistic effects of the improved visible light response ability, higher photogenerated electron transfer efficiency, and redox ability arising from Z-type heterojunctions.     

碳化MoS2/掺硫g-C3N4异质结的合成及其在可见光下催化降解罗丹明B机理

为了进一步提高聚合物半导体类石墨相氮化碳（g-C₃N₄）降解有机物的活性,通过简单的水热法复合得到碳化MoS₂/掺硫g-C₃N₄异质结（MoSC/S-CN）,并在可见光下研究其罗丹明B （RhB）的降解性能。结果表明,相较于纯g-C₃N₄,最优化的MoSC/S-CN样品对可见光的吸收范围得到明显拓宽,并且在100 min内对RhB的降解效率为92.5%,比纯g-C₃N₄性能提高68.83%。一系列的结构和光学性质表明,掺硫后再进一步与碳化MoS₂耦合可以协同作用于g-C₃N₄,改善g-C₃N₄的能带结构,加速光生电子空穴对的分离,有效提高光催化活性。     

g-C3N4/SnS2 Heterostructure: a Promising Water Splitting Photocatalyst

Graphite-like carbon nitride (g-C₃N₄) based heterostrutures has attracted intensive attention due to their prominent photocatalytic performance. Here, we explore the g-C₃N₄/SnS₂ coupling effect on the electronic structures and optical absorption of the proposed g-C₃N₄/SnS₂ heterostructure through performing extensive hybrid functional calculations. The obtained geometric structure, band structures, band edge positions and optical absorptions clearly reveal that the g-C₃N₄ monolayer weakly couples to SnS₂ sheet, and forms a typical van der Waals heterojunction. The g-C₃N₄/SnS₂ heterostructure can effectively harvest visible light, and its valence band maximum and conduction band minimum locate in energetically favorable positions for both water oxidation and reduction reactions. Remarkably, the charge transfer from the g-C₃N₄ monolayer to SnS₂ sheet leads to the built-in interface polarized electric field, which is desirable for the photogenerated carrier separation. The built-in interface polarized electric field as well as the nice band edge alignment implys that the g-C₃N₄/SnS₂ heterostructure is a promising g-C₃N₄ based water splitting photocatalyst with good performance.     

Efficient strategies for boosting the performance of 2D graphitic carbon nitride nanomaterials during photoreduction of carbon dioxide to energy-rich chemicals

Nowadays, the alarming growing interest in providing a solution to increasing concentration of atmospheric carbon dioxide (CO₂) and the associated pollution has attracted global attention. The consequential effects of CO₂ are detrimental to the environment owing to the continuous depletion of carbon-emitting fossil fuels. Photocatalytic CO₂ reduction (CO₂R) to valuable chemicals and fuels is one the promising alternative option to mitigate the global menace instigated by CO₂ emissions. If the strategies for enhancing the CO₂R are unavailable, inefficient, or inappropriate, then efficiency conversion CO₂ to valuable products can become problematic. In that case, the emission of CO₂ results in synchronizing upsurge in the global-mean air surface temperature on the earth and sea levels from 1980 to 2100. This study presents different strategies for boosting the photocatalytic performance of 2D graphitic carbon nitride (g-C₃N₄) for CO₂R reaction. The first part consists of the fundamental principles of photocatalysis. The second part presents some answers to the question: what governs the mechanism of photocatalytic CO₂R? The existing literature lack comprehensive information about the strategical influence of available reactor designs on the photoactivity of 2D g-C₃N₄ for CO₂ conversion to energy-rich chemicals and ways to improve them as discussed in this study. This was then followed by strategies about the synthetic methods for enhancing photocatalytic CO₂R over 2D g-C₃N₄ materials before the discussion of the strategies for enhancing the CO₂ photoreduction on the 2D g-C₃N₄ nanomaterials. Some groups of g-C₃N₄ nanomaterials for photoreduction of CO₂R were also discussed. Unlike the previous reviews in the field, the present study presents some innovation to bridge the knowledge gaps of the previous reviews and corresponding insight thereof. For future breakthroughs, this study also explains some problems with the interpretation in the field. We also highlight insights into innovation on exclusion and inclusion criteria about the performance metrics and present some queries, concerns, and problems with the previous studies. The concluding part consists of research outlooks, including commonly overlooked challenges and future perspectives for ensuring highly efficient strategies, applications of 2D g-C₃N₄ photocatalysts, and CO₂ conversion to meet industrial scale expectations. The present study hypothesized that considering the current technological age, the experiment should go beyond presenting only illustration and analysis about the band energy, but the detailed explanation/information about the pathways of the various products formed using molecular dynamics system and artificial intelligence aspects should be combined in the future studies.     

Upgraded charge transport in g-C3N4 nanosheets by boron doping and their heterojunction with 3D CdIn2S4 for efficient photodegradation of azo dye

The facilitation of charge transport toward the targeted chemical reaction is a challenging task for two-dimensional (2D) nanomaterials. We demonstrate the effectiveness of two different strategies, non-metal doping and heterojunction formation, to adjust the electronic and molecular structures of g-C₃N₄ nanosheets (CN), which could widen the visible-light response and improve the photo-induced electron–hole separation. The g-C₃N₄ nanosheets containing impurity levels (boron doping (BCN)) were prepared by a high-temperature solid-state reaction. Additionally, by anchoring the 3D dichalcogenide structures (CdIn₂S₄) elicited by a wet chemical route, hybrid BCN/CdIn₂S₄ nanostructures were obtained. The resulting BCN/CdIn₂S₄ (BCN–CIS3) nanostructures exhibited an excellent degradation efficiency (95%) for methyl orange (MO) compared to pristine g-C₃N₄ nanosheets (CN) (28%) and boron-doped g-C₃N₄ (BCN) (35%). All the optimized photocatalysts were thoroughly characterized using various techniques and investigated for comparative structural, optical, morphological, and catalytic properties. Our results reveal that introducing boron atoms into the lattice of g-C₃N₄ nanosheets leads to reduction in the band-gap energy and rapid electron transfer. The formation of heterojunctions with the 3D CdIn₂S₄ further assists in improving the degradation efficiency by minimizing the undesired electron–hole recombination, as confirmed by time-resolved photoluminescence (TRPL) analysis. This work proposes feasible strategies and their synergy to develop innovative materials for sustainable energy conversion and environmental remediation applications.     

Tailoring the Pore Size,Basicity, and Binding Energy of Mesoporous C3N5 for CO2 Capture and Conversion

We investigated the CO₂ adsorption and electrochemical conversion behavior of triazole-based C₃N₅ nanorods as a single matrix for consecutive CO₂ capture and conversion. The pore size, basicity, and binding energy were tailored to identify critical factors for consecutive CO₂ capture and conversion over carbon nitrides. Temperature-programmed desorption (TPD) analysis of CO₂ demonstrates that triazole-based C₃N₅ shows higher basicity and stronger CO₂ binding energy than g-C₃N₄. Triazole-based C₃N₅ nanorods with 6.1 nm mesopore channels exhibit better CO₂ adsorption than nanorods with 3.5 and 5.4 nm mesopore channels. C₃N₅ nanorods with wider mesopore channels are effective in increasing the current density as an electrocatalyst during the CO₂ reduction reaction. Triazole-based C₃N₅ nanorods with tailored pore sizes exhibit CO₂ adsorption abilities of 5.6–9.1 mmol/g at 0 °C and 30 bar. Their Faraday efficiencies for reducing CO₂ to CO are 14–38% at a potential of −0.8 V vs. RHE.     

HKUST-1 Derived Hollow C-Cu2−xS Nanotube/g-C3N4 Composites for Visible-Light CO2 Photoreduction with H2O Vapor

As the main component of syngas, reducing CO₂ to CO with high selectivity through photocatalysis could provide a sustainable way to alleviate energy shortage issues. Developing a photocatalytic system with low cost and high performance that is environmentally friendly is the ultimate goal towards CO₂ photoreduction. Herein, an efficient and economic three-component heterojunction photocatalyst is designed and fabricated for converting CO₂ to CO in the absence of organic sacrificial agents. The heterojunction is made of Cu_2−xS nanotubes coated with a carbon layer (C-Cu_2−xS) and g-C₃N₄. By using the classical MOF material HKUST-1 as a precursor, hollow tubular-like metal sulfides (C-Cu_2−xS) with carbon coating were synthesized and further loaded on g-C₃N₄, forming a three-component heterojunction C-Cu_2−xS@g-C₃N₄. The carbon coat in C-Cu_2−xS@g-C₃N₄ acts as an electron reservoir, which facilitates electron–hole pair separation. The optimized C-Cu_2−xS@g-C₃N₄ acted as a photocatalyst in CO₂ reduction with a high reactivity of 1062.6 μmol g⁻¹ and selectivity of 97 %. Compared with bare g-C₃N₄ (158.4 μmol g⁻¹) and C-Cu_2−xS, the reactivity is nearly 7 and 23-fold enhanced and this CO generation rate is higher than most of the reported Cu₂S or g-C₃N₄ composites under similar conditions. The prominent activity may result from enhanced light adsorption and effective charge separation. This work might open up an alternative method for the design and fabrication of high-performance and low-cost photocatalysts for efficiently and durably converting CO₂ to CO with high selectivity.     

石墨相氮化碳的化学合成及应用

石墨相氮化碳(g-C₃N₄)具有独特的电子结构和优异的化学稳定性, 近年来不仅被作为不含金属组分的催化剂和催化剂载体, 广泛地应用于有机官能团的选择性转换、光催化分解水、氧还原和Au、Pd、Ag、Pt等贵金属的负载, 还被作为绿色储能材料和硬模板剂用于H₂、CO₂的存储和纳米金属氮(氧)化物的制备等, 在能源和材料相关领域逐渐引起人们的关注. 本文将从材料的制备和应用角度,综述国内外同行近年来在g-C₃N₄研究中所取得的一些重要进展, 并对其未来发展趋势,特别是在能源和环境领域中的应用进行了展望.