In Situ Synthesis of 3D Flower‐Like Nanocrystalline Ni/C and its Effect on Hydrogen Storage Properties of LiAlH4

Lithium alanate (LiAlH₄) is of particular interest as one of the most promising candidates for solid‐state hydrogen storage. Unfortunately, high dehydrogenation temperatures and relatively slow kinetics limit its practical applications. Herein, 3D flower‐like nanocrystalline Ni/C, composed of highly dispersed Ni nanoparticles and interlaced carbon flakes, was synthesized in situ. The as‐synthesized nanocrystalline Ni/C significantly decreased the dehydrogenation temperature and dramatically improved the dehydrogenation kinetics of LiAlH₄. It was found that the LiAlH₄ sample with 10 wt % Ni/C (LiAlH₄‐10 wt %Ni/C) began hydrogen desorption at approximately 48 °C, which is very close to ambient temperature. Approximately 6.3 wt % H₂ was released from LiAlH₄‐10 wt %Ni/C within 60 min at 140 °C, whereas pristine LiAlH₄ only released 0.52 wt % H₂ under identical conditions. More importantly, the dehydrogenated products can partially rehydrogenate at 300 °C under 4 MPa H₂. The synergetic effect of the flower‐like carbon substrate and Ni active species contributes to the significantly reduced dehydrogenation temperatures and improved kinetics.     

The Onset of Dehydrogenation in Solid Ammonia Borane: An Ab Initio Metadynamics Study

The discovery of effective hydrogen storage materials is fundamental for the progress of a clean energy economy. Ammonia borane (H₃BNH₃, AB) has attracted great interest as a promising candidate but the reaction path that leads from its solid phase to hydrogen release is not yet fully understood. To address the need for insights in the atomistic details of such a complex solid state process, in this work we use ab‐initio molecular dynamics and metadynamics to study the early stages of AB dehydrogenation. We show that the formation of ammonia diborane (H₃NBH₂(μ‐H)BH₃) leads to the release of NH₄⁺, which in turn triggers an autocatalytic H₂ production cycle. Our calculations provide a model for how complex solid state reactions can be theoretically investigated and rely upon the presence of multiple ammonia borane molecules, as substantiated by standard quantum‐mechanical simulations on a cluster.     

High‐Pressure Raman and Calorimetry Studies of Vanadium(III) Alkyl Hydrides for Kubas‐Type Hydrogen Storage

Reversible hydrogen storage under ambient conditions has been identified as a major bottleneck in enabling a future hydrogen economy. Herein, we report an amorphous vanadium(III) alkyl hydride gel that binds hydrogen through the Kubas interaction. The material possesses a gravimetric adsorption capacity of 5.42 wt % H₂ at 120 bar and 298 K reversibly at saturation with no loss of capacity after ten cycles. This corresponds to a volumetric capacity of 75.4 kgH₂ m^?3. Raman experiments at 100 bar confirm that Kubas binding is involved in the adsorption mechanism. The material possesses an enthalpy of H₂ adsorption of +0.52 kJ mol^?1 H₂, as measured directly by calorimetry, and this is practical for use in a vehicles without a complex heat management system.     

Renewed Insight into the Promoting Mechanism of Magnesium Hydride on Ammonia Borane

Our previous study found that mechanically milling with magnesium hydride (MgH₂) could dramatically improve the dehydrogenation property of ammonia borane (AB). Meanwhile, it appears that the MgH₂ additive maintains its phase stability in the milling and subsequent heating process. In an effort to further the mechanistic understanding of the AB/MgH₂ system, we reinvestigated the property and structure evolution in the hydrogen release process of the AB/0.5MgH₂ sample. Property examination using volumetric method and synchronous thermal analyses showed that the AB/0.5 MgH₂ sample releases ～13.8 wt % hydrogen after being heated at 300 °C. This hydrogen amount is in excess of that available from AB, indicative of the participation of a faction of MgH₂ in the dehydrogenation process of AB. Structural and chemical state analyses using Fourier transformation infrared spectroscopy and solid‐state ¹¹B nuclear magnetic resonance techniques further showed that part of MgH₂ participates in the dehydrogenation process of AB from the first step, resulting in the formation of Mg? B? N? H intermediate species. The incorporation of Mg in AB is believed to be a crucial event leading to dehydrogenation property improvements, particularly for the release of the last equivalent of H₂ in AB at relatively moderate temperature. These findings have provided renewed insight into the promoting mechanism of MgH₂ on the hydrogen release from AB.     

Weak Interactions Initiate C−H and C−C Bond Dissociation of Ethane on Nbn+ Clusters

The conversion of ethane into value-added chemicals under ambient conditions has attracted much attention but the mechanisms remain not fully understood. Here we report a study on the reaction of ethane with thermalized Nb_n⁺ clusters based on a multiple-ion laminar flow tube reactor combined with a triple quadrupole mass spectrometer (MIFT-TQMS). It is found that ethane reacts with Nb_n⁺ clusters to form both products of dehydrogenation and methane-removal (odd-carbon products). Combined with density functional theory (DFT) calculations, we studied the reaction mechanisms of the C−C bond activation and C−H bond cleavage on the Nb_n⁺ clusters. It is unveiled that hydrogen atom transfer (HAT) initiates the reaction process, giving rise to the formation of Nb−C bonds and an elongated C−C distance in the HNb_n⁺CH₂CH₃ motif. Subsequent reactions allow for C−C bond activation and a competitive HAT process which is associated with CH₄ removal or H₂ release, resulting in the production of the observed carbides.     

Metal‐Borohydride‐Modified Zr(BH4)4⋅8 NH3: Low‐Temperature Dehydrogenation Yielding Highly Pure Hydrogen

Due to its high hydrogen density (14.8 wt %) and low dehydrogenation peak temperature (130 °C), Zr(BH₄)₄ ? 8 NH₃ is considered to be one of the most promising hydrogen‐storage materials. To further decrease its dehydrogenation temperature and suppress its ammonia release, a strategy of introducing LiBH₄ and Mg(BH₄)₂ was applied to this system. Zr(BH₄)₄ ? 8 NH₃–4 LiBH₄ and Zr(BH₄)₄ ? 8 NH₃–2 Mg(BH₄)₂ composites showed main dehydrogenation peaks centered at 81 and 106 °C as well as high hydrogen purities of 99.3 and 99.8 mol % H₂, respectively. Isothermal measurements showed that 6.6 wt % (within 60 min) and 5.5 wt % (within 360 min) of hydrogen were released at 100 °C from Zr(BH₄)₄ ? 8 NH₃–4 LiBH₄ and Zr(BH₄)₄ ? 8 NH₃–2 Mg(BH₄)₂, respectively. The lower dehydrogenation temperatures and improved hydrogen purities could be attributed to the formation of the diammoniate of diborane for Zr(BH₄)₄ ? 8 NH₃–4 LiBH₄, and the partial transfer of NH₃ groups from Zr(BH₄)₄ ? 8 NH₃ to Mg(BH₄)₂ for Zr(BH₄)₄ ? 8 NH₃–2 Mg(BH₄)₂, which result in balanced numbers of BH₄ and NH₃ groups and a more active H^δ+ ??? ^?δH interaction. These advanced dehydrogenation properties make these two composites promising candidates as hydrogen‐storage materials.     

Trimeric cluster of lithium amidoborane—the smallest unit for the modeling of hydrogen release mechanism

A detailed first‐principle DFT M06/6‐311++G(d.p) study of dehydrogenation mechanism of trimeric cluster of lithium amidoborane is presented. The first step of the reaction is association of two LiNH₂BH₃ molecules in the cluster. The dominant feature of the subsequent reaction pathway is activation of H atom of BH₃ group by three Li atoms with formation of unique Li₃H moiety. This Li₃H moiety is destroyed prior to dehydrogenation in favor of formation of a triangular Li₂H moiety, which interacts with protic H atom of NH₂ group. As a result of this interaction, Li₂H₂ moiety is produced. It features N^?? H⁺? H^? group suited near the middle plane between two Li⁺ in the transition state that leads to H₂ release. The transition states of association and hydrogen release steps are similar in energy. It is concluded that the trimer, (LiNH₂BH₃)₃, is the smallest cluster that captures the essence of the hydrogen release reaction. © 2016 Wiley Periodicals, Inc.     

H2在K0-MWCNTs上储存和吸附/脱附特性研究

利用高压容积法辅以卸压升温脱附排水法, 测定金属K修饰多壁碳纳米管对H₂的吸附储存容量. 结果表明, 在室温(25 ℃), 7.25 MPa实验条件下, x%K⁰-MWCNTs (x%＝30%～35%, 质量百分数)对H₂的吸附储存容量可达3.80 wt%(质量百分数), 是相同条件下单纯MWCNTs氢吸附储量的2.5倍; 室温下卸至常压的脱附氢量为3.36 wt%(占总吸附氢量的～88%), 后续升温至673 K的脱附氢量为0.41 wt%(占总吸附氢量的～11%). 利用LRS和H₂-TPD-GC/MS等谱学方法对H₂/K⁰-MWCNTs吸附体系的表征研究表明, H₂在K⁰-MWCNTs上吸附存在非解离 (即分子态)和解离(即原子态)两种吸附态; 在≤723 K温度下, H₂/K⁰-MWCNTs体系的脱附产物几乎全为H₂气; 723 K以上高温脱附产物不仅含H₂, 也含有CH₄, C₂H₄和C₂H₂等C₁/C₂-烃.     

Robust hydrogen production from HCOOH over amino-modified KIT-6-confined PdIr alloy nanoparticles

Formic acid（FA）, which can be produced via CO2reduction and biomass conversion, has received extensive interest as a convenient and safe hydrogen carrier due to its wide range of sources, renewable,high hydrogen content（4.4 wt%）, and convenient storage/transportation. Designing highly efficient catalysts is the main challenge to realize the hydrogen production from FA. In this work, well-dispersed and electron-rich Pd Ir alloy nanoparticles with a size of 1.8 nm are confined in amino-modified 3D...     

Boron Hydrogen Compounds: Hydrogen Storage and Battery Applications

About 25 years ago, Bogdanovic and Schwickardi (B. Bogdanovic, M. Schwickardi: J. Alloys Compd. 1–9, 253 (1997) discovered the catalyzed release of hydrogen from NaAlH₄. This discovery stimulated a vast research effort on light hydrides as hydrogen storage materials, in particular boron hydrogen compounds. Mg(BH₄)₂, with a hydrogen content of 14.9 wt %, has been extensively studied, and recent results shed new light on intermediate species formed during dehydrogenation. The chemistry of B₃H₈⁻, which is an important intermediate between BH₄⁻ and B₁₂H₁₂²⁻, is presented in detail. The discovery of high ionic conductivity in the high-temperature phases of LiBH₄ and Na₂B₁₂H₁₂ opened a new research direction. The high chemical and electrochemical stability of closo-hydroborates has stimulated new research for their applications in batteries. Very recently, an all-solid-state 4 V Na battery prototype using a Na₄(CB₁₁H₁₂)₂(B₁₂H₁₂) solid electrolyte has been demonstrated. In this review, we present the current knowledge of possible reaction pathways involved in the successive hydrogen release reactions from BH₄⁻ to B₁₂H₁₂²⁻, and a discussion of relevant necessary properties for high-ionic-conduction materials.     

Potassium silanide (KSiH3): a reversible hydrogen storage material

KSi silicide can absorb hydrogen to directly form the ternary KSiH₃ hydride. The full structure of α‐KSiD₃, which has been solved by using neutron powder diffraction (NPD), shows an unusually short Si? D lengths of 1.47 Å. Through a combination of density functional theory (DFT) calculations and experimental methods, the thermodynamic and structural properties of the KSi/α‐KSiH₃ system are determined. This system is able to store 4.3 wt % of hydrogen reversibly within a good P–T window; a 0.1 M Pa hydrogen equilibrium pressure can be obtained at around 414 K. The DFT calculations and the measurements of hydrogen equilibrium pressures at different temperatures give similar values for the dehydrogenation enthalpy (≈23 kJ mol^?1 H₂) and entropy (≈54 J K^?1 mol^?1 H₂). Owing to its relatively high hydrogen storage capacity and its good thermodynamic values, this KSi/α‐KSiH₃ system is a promising candidate for reversible hydrogen storage.     

Lithiated Primary Amine—A New Material for Hydrogen Storage

A facile method for synthesizing crystalline lithiated amines by ball milling primary amines with LiH was developed. The lithiated amines exhibit an unprecedented endothermic dehydrogenation feature in the temperature range of 150–250 °C, which shows potential as a new type of hydrogen storage material. Structural analysis and mechanistic studies on lithiated ethylenediamine (Li₂EDA) indicates that Li may mediate the dehydrogenation through an α,β‐LiH elimination mechanism, creating a more energy favorable pathway for the selective H₂ release.     

Sorption and desorption properties of a CaH2/MgB2/CaF2 reactive hydride composite as potential hydrogen storage material

The hydrogenation behavior of 3CaH₂+4MgB₂+CaF₂ composite was studied by manometric measurements, powder X-ray diffraction, differential scanning calorimetry and attenuated total reflection infrared spectroscopy. The maximum observed quantity of hydrogen loaded in the composite was 7.0 wt%. X-ray diffraction showed the formation of Ca(BH₄)₂ and MgH₂ after hydrogenation. The activation energy for the dehydrogenation reaction was evaluated by DSC measurements and turns out to be 162±15 kJ mol⁻¹ H₂. This value decreases due to cycling to 116±5 kJ mol⁻¹ H₂ for the third dehydrogenation step. A decrease of ca. 25–50 °C in dehydrogenation temperature was observed with cycling. Due to its high capacity and reversibility, this composite is a promising candidate as a potential hydrogen storage material.     

Dehydrogenation of Formic Acid at Room Temperature: Boosting Palladium Nanoparticle Efficiency by Coupling with Pyridinic‐Nitrogen‐Doped Carbon

The use of formic acid (FA) to produce molecular H₂ is a promising means of efficient energy storage in a fuel‐cell‐based hydrogen economy. To date, there has been a lack of heterogeneous catalyst systems that are sufficiently active, selective, and stable for clean H₂ production by FA decomposition at room temperature. For the first time, we report that flexible pyridinic‐N‐doped carbon hybrids as support materials can significantly boost the efficiency of palladium nanoparticle for H₂ generation; this is due to prominent surface electronic modulation. Under mild conditions, the optimized engineered Pd/CN_0.25 catalyst exhibited high performance in both FA dehydrogenation (achieving almost full conversion, and a turnover frequency of 5530 h^?1 at 25 °C) and the reversible process of CO₂ hydrogenation into FA. This system can lead to a full carbon‐neutral energy cycle.     

Insights and Activation Energy Surface of the Dehydrogenation of C2HxO Species in Ethanol Oxidation Reaction on Ir(100)

Dehydrogenation of an organic compound is the first and the most fundamental elementary reaction in many organic reactions. In ethanol oxidation reaction (EOR) to form CO₂, there are a total of 46 pathways in C₂H_xO (x=1–6) species leading to the removal of all six hydrogen atoms in five C−H bonds and one O−H bond. To investigate the degree of dehydrogenation in EOR under operando conditions, we performed density function theory (DFT) calculations to study 28 dehydrogenation steps of C₂H_xO on Ir(100). An activation energy surface was then constructed and compared with that of the C−C bond cleavages to understand the importance of the degree of dehydrogenation in EOR. The results show that there are likely 28 dehydrogenations in EOR under fuel cell temperatures and the last two hydrogens in C₂H₂O are less likely cleaved. On the other hand, deep dehydrogenation including 45 dehydrogenations can occur under ethanol steam reforming conditions.     

Hydrogen storage over alkali metal hydride and alkali metal hydroxide composites

Alkali metal hydroxide and hydride composite systems contain both protic(H bonded with O) and hydridic hydrogen. The interaction of these two types of hydrides produces hydrogen. The enthalpy of dehydrogenation increased with the increase of atomic number of alkali metals,i.e.,-23 kJ/molH2 for LiOH-LiH, 55.34 kJ/molH2 for NaOH-NaH and 222 kJ/molH2 for KOH-KH. These thermodynamic calculation results were consistent with our experimental results. H2 was released from LiOH-LiH system during ball milling. The dehydrogenation temperature of NaOH-NaH system was about 150℃; whereas KOH and KH did not interact with each other during the heating process. Instead, KH decomposed by itself. In these three systems, NaOH-NaH was the only reversible hydrogen storage system, the enthalpy of dehydrogenation was about 55.65 kJ/molH2, and the corresponding entropy was ca. 101.23 J/(molH2 K), so the temperature for releasing 1.0 bar H2 was as high as 518℃, showing unfavorable thermodynamic properties. The activation energy for hydrogen desorption of NaOH-NaH was found to be57.87 kJ/mol, showing good kinetic properties.     

Desolvation and Dehydrogenation of Solvated Magnesium Salts of Dodecahydrododecaborate: Relationship between Structure and Thermal Decomposition

Attempts to synthesize solvent‐free MgB₁₂H₁₂ by heating various solvated forms (H₂O, NH₃, and CH₃OH) of the salt failed because of the competition between desolvation and dehydrogenation. This competition has been studied by thermogravimetric analysis (TGA) and temperature‐programmed desorption (TPD). Products were characterized by IR, solution‐ and solid‐state NMR spectroscopy, elemental analysis, and single‐crystal or powder X‐ray diffraction analysis. For hydrated salts, thermal decomposition proceeded in three stages, loss of water to form first hexahydrated then trihydrated, and finally loss of water and hydrogen to form polyhydroxylated complexes. For partially ammoniated salts, two stages of thermal decomposition were observed as ammonia and hydrogen were released with weight loss first of 14 % and then 5.5 %. Thermal decomposition of methanolated salts proceeded through a single step with a total weight loss of 32 % with the release of methanol, methane, and hydrogen. All the gaseous products of thermal decomposition were characterized by using mass spectrometry. Residual solid materials were characterized by solid‐state ¹¹B magic ‐ angle spinning (MAS) NMR spectroscopy and X‐ray powder diffraction analysis by which the molecular structures of hexahydrated and trihydrated complexes were solved. Both hydrogen and dihydrogen bonds were observed in structures of [Mg(H₂O)₆B₁₂H₁₂] ? 6 H₂O and [Mg(CH₃OH)₆B₁₂H₁₂] ? 6 CH₃OH, which were determined by single‐crystal X‐ray diffraction analysis. The structural factors influencing thermal decomposition behavior are identified and discussed. The dependence of dehydrogenation on the formation of dihydrogen bonds may be an important consideration in the design of solid‐state hydrogen storage materials.     

Probing the structure, stability and hydrogen storage properties of calcium dodecahydro-closo-dodecaborate

Calcium borohydride can reversibly store up to 9.6 wt% hydrogen; however, the material displays poor cyclability, generally associated with the formation of stable intermediate species. In an effort to understand the role of such intermediates on the hydrogen storage properties of Ca(BH₄)₂, calcium dodecahydro-closo-dodecaborate was isolated and characterized by diffraction and spectroscopic techniques. The crystal structure of CaB₁₂H₁₂ was determined from powder XRD data and confirmed by DFT and neutron vibrational spectroscopy studies. Attempts to dehydrogenate/hydrogenate mixtures of CaB₁₂H₁₂ and CaH₂ were made under conditions known to favor partial reversibility in calcium borohydride. However, up to 670 K no notable formation of Ca(BH₄)₂ (during hydrogenation) or CaB₆ (during dehydrogenation) occurred. It was demonstrated that the stability of CaB₁₂H₁₂ can be significantly altered using CaH₂ as a destabilizing agent to favor the hydrogen release.     

Synthesis and Thermal Decomposition Behaviors of Magnesium Borohydride Ammoniates with Controllable Composition as Hydrogen Storage Materials

An ammonia‐redistribution strategy for synthesizing metal borohydride ammoniates with controllable coordination number of NH₃ was proposed, and a series of magnesium borohydride ammoniates were easily synthesized by a mechanochemical reaction between Mg(BH₄)₂ and its hexaammoniate. A strong dependence of the dehydrogenation temperature and purity of the released hydrogen upon heating on the coordination number of NH₃ was elaborated for Mg(BH₄)₂?x NH₃ owing to the change in the molar ratio of H^δ+ and H^δ?, the charge distribution on H^δ+ and H^δ?, and the strength of the coordinate bond N:→Mg²⁺. The monoammoniate of magnesium borohydride (Mg(BH₄)₂?NH₃) was obtained for the first time. It can release 6.5 % pure hydrogen within 50 minutes at 180 °C.     

A theoretical study of high-pressure-induced phases of LiAlH<Subscript>4</Subscript> using calculated NQCC parameters

Quadrupolar parameters of nuclei can be used as a tool to understand the electronic structure of compounds. Lithium alanate (LiAlH₄) is a potential hydrogen storage material because of its high capacity of 10.5 wt % H₂. However, the drawbacks of its dehydrogenation process are the relatively high temperatures and the slow dehydrogenation kinetics; furthermore, its reversibility is rather poor. Understanding the bonding nature of Al and H is essential for improving its dehydrogenation performance. In this work the charge density distribution in LiAlH₄ is studied. Thus using calculated nuclear quadrupole coupling constants of hydrogens (²H-NQCCs), the electronic structure of α-LiAlH₄ with high pressure forms of LiAlH₄, (β- and γ-LiAlH₄) were compared. The results show that easier condition for dehydrogenation is expected in β-LiAlH₄. Comparison of calculated dehydrogenation enthalpies of LiAlH₄ phases verifies this prediction. The electric field gradient (EFG) of quadrupolar nuclei were calculated to obtain NQCC parameters. All calculations performed using Gaussian 03 at B3LYP/6-31G* level of theory.