Synthesis and radical ring-opening polymerization behavior of vinylcyclopropane bearing six-membered cyclic acetal moiety

Synthesis and radical ring-opening polymerization of vinylcyclopropane bearing six-membered cyclic acetal moiety, 1-vinyl-4,8-dioxaspiro[2.5]octane (1), were carried out. 1 was prepared by the reaction of 1,1-dichloro-2-vinylcyclopropane and 1,3-propanediol in DMF in the presence of a base. Radical polymerization of 1 was carried out in the presence of an appropriate initiator (3 mol % vs. 1) at 60 and 120°C in degassed sealed ampoules for 20 h. A colorless transparent viscous polymer was obtained by the isolation with preparative HPLC. The structure of poly(1) was determined to consist of two 1,5-ring-opened units and a unit bearing no olefinic moiety. The difference of the activation energies for the ring-opening reaction of the cyclopropane ring calculated by the molecular orbital method could explain the selectivity in the direction of the cleavage of the cyclopropane ring. Acid hydrolysis of poly(1) afforded the corresponding polyketone in quantitative conversion. © 1996 John Wiley & Sons, Inc.     

Mapping the characteristics of the radical ring‐opening polymerization of a cyclic ketene acetal towards the creation of a functionalized polyester

Radical ring‐opening polymerization of cyclic ketene acetals is a means to achieve novel types of aliphatic polyesters. 2‐methylene‐1,3‐dioxe‐5‐pene is a seven‐membered cyclic ketene acetal containing an unsaturation in the 5‐position in the ring structure. The double bond functionality enables further reactions subsequent to polymerization. The monomer 2‐methylene‐1,3‐dioxe‐5‐pene was synthesized and polymerized in bulk by free radical polymerization at different temperatures, to determine the structure of the products and propose a reaction mechanism. The reaction mechanism is dependent on the reaction temperature. At higher temperatures, ring‐opening takes place to a great extent followed by a new cyclization process to form the stable five‐membered cyclic ester 3‐vinyl‐1,4‐butyrolactone as the main reaction product. Thereby, propagation is suppressed and only small amounts of other oligomeric products are formed. At lower temperatures, the cyclic ester formation is reduced and oligomeric products containing both ring‐opened and ring‐retained repeating units are produced at higher yield. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4587–4601, 2009     

Synthesis of degradable poly(methyl methacrylate) star polymers via RAFT copolymerization with cyclic ketene acetals

Copolymerization of the cyclic ketene acetal 5,6‐benzo‐2‐methylene‐1,3‐dioxepane (BMDO) with methyl methacrylate (MMA) is studied with respect to its copolymerization parameters and the suitability to control BMDO/MMA copolymerizations via the reversible addition‐fragmentation chain transfer (RAFT) technique to obtain linear and 4‐arm star polymers. BMDO shows disparate copolymerization behavior with MMA and r₁ = 0.33 ± 0.06 and r₂ = 6.0 ± 0.8 have been determined for polymerization at 110 °C in anisole from fitting copolymer composition vs. comonomer feed data to the Lewis–Mayo equation. Copolymerization of the two monomers is successful in RAFT polymerization employing a trithiocarbonate control agent. As desired, polymers contain only little amount of polyester units stemming from BMDO units and preliminary degradation experiment show that the polymer degrades slowly, but steadily in aqueous 1 M NaOH dispersion. Within ten days, the polymers are broken down to low molecular weight segments from an initial molecular weight of M_n = 6000 g mol^?1. Star (co)polymerization with an erythritol‐based tetra‐functional RAFT agent following the Z‐group approach proceeds efficiently and polymers with a number‐average molecular weight of 10,000 g mol^?1 are readily obtained that degrade in similar manner as the linear copolymer counterparts. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1633–1641     

Synthesis of amorphous aliphatic polyester‐ether homo‐ and copolymers by radical polymerization of ketene acetals

Radical ring‐opening polymerization has been efficiently used to copolymerize 2‐methylene‐1,3,6‐trioxocane (MTC) and 2‐methylene‐1,3‐dioxepane (MDO). The cyclic ketene acetal MTC was first synthesized and homopolymerized at different temperatures using either 2,2‐azobisisobutyronitrile or dicumyl peroxide as initiator. The polymerization mechanism was not temperature‐dependent, and the polymerization proceeded with 100% ring‐opening at all the temperatures evaluated. The structures of MTC and PMTC were verified by ¹H‐nuclear magnetic resonance (NMR) and ¹³C‐NMR spectroscopies. A number‐average molecular weight of 6500 was obtained after 2 days at 70 °C in bulk, which was somewhat higher than the theoretical molecular weight. A significant amount of branching was detected from the high polydispersity index as well as the glass‐transition temperatures. The polyester‐ether was then successfully obtained by copolymerization of MTC with MDO. Different feed ratios and temperatures were used to map the reaction, and the copolymers were characterized by NMR, size exclusion chromatography, and differential scanning calorimetry. The amount of MTC within the polymer was independent of the feed ratio and always higher than the amount of MDO. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Branched polymer via free radical polymerization of chain transfer monomer: A theoretical and experimental investigation

A simple mathematic model for the free radical polymerization of chain transfer monomers containing both polymerizable vinyl groups and telogen groups was proposed. The molecular architecture of the obtained polymer can be prognosticated according to the developed model, which was validated experimentally by homopolymerization of 4‐vinyl benzyl thiol (VBT) and its copolymerization with styrene. The chain transfer constant (C_T) of telogen group in a chain transfer monomer is considered to play an important role to determine the architecture of obtained polymer according to the proposed model, either in homopolymerization or copolymerization. A highly branched polymer will be formed when the C_T value is around unity, while a linear polymer with a certain extent of side chains will be obtained when the C_T value is much bigger or smaller than unity. The C_T of VBT was determined to be around 15 by using the developed model and ¹H NMR monitored experiments. The obtained poly(VBT) and its copolymers were substantiated to be mainly consisted of linear main chain with side branching chains, which is in agreement with the anticipation from the developed model. The glass transition temperature, number average molecular weight, and its distribution of those obtained polymer were primarily investigated. This model is hopefully to be used as a strategy to select appropriate chain transfer monomers for preparing hyperbranched polymers. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1449–1459, 2008     

Radical polymerization of ortho-(1,3-dioxolan-2-yl)phenyl ethyl fumarate involving intramolecular hydrogen abstraction and ring opening of cyclic acetal

The polymerization of o-(1,3-dioxolan-2-yl)phenyl ethyl fumarate (DOPEF) initiated with dimethyl 2,2′-azobisiso-butyrate (MAIB) was studied kinetically in benzene. The polymerization rate (R_p) at 60°C was given by R_p = k [MAIB]^0.76 [DOPEF]^0.71. The overall activation energy of polymerization was calculated to be 98.3 kJ/mol. The number-average molecular weight of resulting poly(DOPEF) was in the range of 1000–3100. ¹H- and ¹³C-NMR spectra of resulting polymers revealed that the radical polymerization of DOPEF proceeds in a complicated manner involving vinyl addition, intramolecular hydrogen abstraction, and further ring opening of the cyclic acetal at higher temperatures. From the copolymerization of DOPEF (M₁) and styrene (St) (M₂) at 60°C, the monomer reactivity ratios were obtained to be r₁ = 0.02 and r₂ = 0.20, the values of which are similar to those of the copolymerization of ethyl o-formylphenyl fumarate and St. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 563–572, 1998     

A kinetic, spectral and theoretical investigation on the role of oxygen in the radiolytic oxidation of a sorbityl cyclic acetal

The oxidation process of the cyclic acetal sorbitylfurfural (SF) has been thoroughly examined from the kinetic, spectroscopic and theoretical point of view. Oxidation has been initiated by the radiolitically produced OH radical in the presence of variable oxygen amounts. Two competing reaction pathways are evidenced which lead to quite different products, although they do not affect the acetal ring integrity. The peroxidation of the hydroxylated furanic ring (k ₄=(6.1±0.9)×10⁸ M⁻¹ s⁻¹) maintains the ring structurevia HO₂^• elimination (k ₆=(1.9±0.4)×10⁵ s⁻¹). Unlike that, the peroxidation of the pseudo-allylic radical (k ₅=(1.9±0.9)×10⁹ M⁻¹ s⁻¹), formedvia β-cleavage, fixes the destructured intermediate, leading to a tetroxide, which slowly decomposes through a Russell mechanism (k ₈=(2.3±0.6)×10² s⁻¹). It is confirmed that the steady state concentration of the tetroxide is very low, which suggests a molar absorption coefficient for it around 1.2×10⁴ M⁻¹ cm⁻¹ at 265 nm. The end products of the latter pathway have been characterized as carboxylic and butenald-sorbitol derivatives. The kinetic and spectral data of every step of the process have been fitted by the above outlined mechanism. The energetics of the mechanism has been detailed byab initio computations as well, carrying further substantiation to it. Semi-empirical calculations were also employed to describe the spectral properties of each intermediate.     

A computational study on the reactivity enhancement in the free radical polymerization of alkyl α‐hydroxymethacrylate and acrylate derivatives

The free radical polimerizability behavior of alkyl α‐hydroxymethacrylate (RHMA) derivatives ( M1–M3 ) has been modeled by considering the propagation of the dimeric units of the compounds of interest. All the transition structures in this class of monomers are stabilized by long‐range C?O…H? C interactions. The RHMA monomer bearing the ester functionality ( M2 ) polymerizes slightly faster than the one with the ether functionality ( M1 ) because of stronger electrostatic interactions between the C?O and H? C groups. 2‐(Methoxycarbonyl)allyl benzoate ( M3 ) shows higher reactivity as compared to M1 and M2 due to stronger electrostatic interactions. The same type of study has been carried out for hexyl ( M4 ), benzyl ( M5 ), and phenyl ( M6 ) acrylate derivatives whose increasing reactivity has been attributed to the presence of C?O…H? C, C?O…H‐? as well as π–π stabilizing interactions, respectively. While B3LYP/6‐31+G(d) has been used to locate the stationary points along the free radical polymerization of nonaromatic species, long‐range stabilizing interactions have only been detected with M06‐2X/6‐31+G(d). The kinetics that we obtain with this latter methodology for the free radical polymerization reactions of M1 – M6 agree well qualitatively with experiment. An implicit solvent model has reproduced the kinetics of M1–M3 in benzene the best. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

A theoretical study on the destruction of typical biomass tar components (toluene,phenol and naphthalene) by OH radical

The detailed reaction mechanism of OH radical destroying toluene, phenol and naphthalene was studied through quantum chemical calculations in the research. Theoretical results indicate that for phenol and toluene, OH radical preferentially attack the ortho C atom due to the functional group on the benzene ring. But for naphthalene, OH radical preferentially attack the para-position C atoms because of its inherent benzo structure. To further study of the kinetics, the rate constant was calculated by the transition state theory. The comparison shows that the theoretical reaction rate constants for the degradation of tar by the OH radical were consistent with those obtained from literature experiments. And the rate constant of destructing naphthalene by OH radical was larger than that of destructing toluene, but lower than that of destructing phenol. The degradation sequence of OH radical to tar is: phenol ​> ​naphthalene ​> ​toluene. Because of the activation of hydroxyl group in benzene ring, phenol is the most easily attacked and destroyed by OH radical. The theoretical results can provide theoretical basis and data reference for further research on the removal of biomass tar and aromatics by OH radical.     

“Living”/controlled free radical polymerization of MMA in the presence of cobalt(II) 2‐ethylhexanoate: A switch from RAFT to ATRP mechanism

A metal complex, cobalt(II) 2‐ethylhexanoate (CEH), was added to the system of thermal‐initiated reversible addition‐fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN) as the RAFT agent at 115 °C. The polymerization rate was remarkably enhanced in the presence of CEH in comparison with that in the absence of CEH, and the increase of the CPDN concentration also accelerated the rate of polymerization. The polymerization in the concurrence of CPDN and CEH demonstrated the characters of “living”/controlled free radical polymerization: the number‐average molecular weights (M_n) increasing linearly with monomer conversion, narrow molecular weight distributions (M_w/M_n) and obtained PMMA end‐capped with the CPDN moieties. Meanwhile, CEH can also accelerate the rate of RAFT polymerization of MMA using the PMMA as macro‐RAFT agent instead of CPDN. Similar polymerization profiles were obtained when copper (I) bromide (CuBr)/N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine was used instead of CEH. Extensive experiments in the presence of butyl methacrylate, bis(cyclopentadienyl) cobalt(II) and cumyl dithionaphthalenoate were also conducted; similar results as those of MMA/CPDN/CEH system were obtained. A transition of the polymerization mechanism, from RAFT process without CEH addition to atom transfer radical polymerization in the presence of CEH, was possibly responsible for polymerization profiles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5722–5730, 2007     

Stereoregular control of poly(4‐vinyl pyridine) on free radical polymerization by using the inclusion complex with randomly methylated β‐cyclodextrin

Highly heterotactic poly(4‐vinyl pyridine)s (P4VPs) with the fraction of mr content (f_mr) > 0.81 were synthesized by free radical polymerization of 4‐vinyl pyridine (4VP) with randomly methylated β‐cyclodextrin (β‐RMCD) in acidic aqueous media of HNO₃ and CF₃COOH at 40 °C. The heterotacticity of P4VP strongly depended on the neutralization of 4VP. The complete neutralization of 4VP with HNO₃ or CF₃COOH increased the heterotacticity of P4VP, whereas atactic P4VP was obtained in water. The partial decomposition of β‐RMCD by HCl reduced the heterotacticity of P4VP (f_mr ≈ 0.74). The structures of inclusion complexed monomers were determined by Job's plot, 2D NMR with nuclear Overhauser enhancement spectroscopy analyses, and simulation by MM2. The 1:2 complex with [β‐RMCD]:[4VP] with meso placement of 4VPs in β‐RMCD was formed when 4VP was completely neutralized with acid, whereas the 1:1 complex was formed in water. The mechanism of heterospecific control by using β‐RMCD was proposed. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Solvent effects on the geometry,electronic structure,and bonding style of Zn(N5)2: A theoretical study

Nitrogen-rich compounds involving the cyclo-pentazole anion (cyclo-N₅⁻) have attracted extensive attention due to higher energy release and environmental friendliness than traditional high energy density materials (HEDMs). However, the synthesis of stable HEDMs with cyclo-N₅⁻ is still a challenge. In this study, the effect of nine solvents on the geometrical and electronic structures and solvation energies of Zn(N₅)₂, one of the recently synthesized nitrogen-rich compounds, was studied using the density functional theory and the polarized continuum model. The results indicated an increase in the stability of Zn(N₅)₂ in the solution phase compared to the vacuum phase, and the stability of Zn(N₅)₂ increases with increasing dielectric constants. The energy gap of frontier molecular orbitals and the absolute value of total energy in water are the largest, revealing that Zn(N₅)₂ is more stable in water than in other solvents. To understand the stabilization mechanism of Zn(N₅)₂ by water, further studies were performed with the natural bond orbital (NBO) analysis and the quantum theory of atoms in molecules (QTAIM) analysis using the explicit solvent model. The charge transfer and the hydrogen bonds are observed between Zn(N₅)₂ and water, which are beneficial to improvement of the stability of Zn(N₅)₂. This may indicate the solvents that have strong interactions with the cyclo-N₅⁻ candidate may improve the possibility of success of synthesis.     

Unveiling the binding interaction of zinc (II) complexes of homologous Schiff-base ligands on the surface of BSA protein: A combined experimental and theoretical approach

Four new zinc (II) complexes [Zn (HL¹H)Br₂] (1), [Zn (HL¹H)Cl₂] (2), [Zn₂(HL²)Br₃] (3), and [Zn (HL²)Cl] (4) have been synthesized by adopting template synthetic strategy and utilizing two homologous Schiff base ligands (H₂L¹ = 4-bromo-2-{[2-(2-hydroxyethylamino)-ethylimino]-methyl}-6-methoxyphenol, H₂L² = 4-bromo-2-{[3-(2-hydroxyethylamino)propylimino]methyl}-6-methoxyphenol), differing in one -CH₂- unit in the ligating backbone, by adopting template synthetic strategy. All the complexes have been characterized by single crystal X-ray diffraction analysis as well as by other routine physicochemical techniques. Ligand mediated structural variations have been observed and rationalized by density functional theoretical (DFT) calculations. Interaction of the complexes 1–4 with Bovine Serum Albumin protein (BSA) has been studied by different spectroscopic techniques. A complete thermodynamic profile (ΔH^o, ΔS^o and ΔG^o) was evaluated initially from the change in absorption and fluorescence spectra upon addition of BSA to the complexes. Appreciable binding constant values in the range ~ 0.94–4.51 × 10⁴ M⁻¹ indicate efficient binding tendency of the complexes to BSA with the sequence 1 ≅ 2 > 3 ≅ 4. Circular dichroism (CD), isothermal calorimetric titration experiments, molecular docking and molecular dynamics have been performed to gain deep insight into the binding regions of complex 1 to BSA. Experimental evidences suggest an interaction of zinc complexes at the surface of BSA protein and this particular binding has been exploited to determine unknown concentration of BSA protein. For this purpose complex 1 was explored as a BSA protein quantification tool.