Aminothiazonaphthalic anhydride derivatives as photoinitiators for violet/blue LED‐Induced cationic and radical photopolymerizations and 3D‐Printing resins

The cations and radicals produced in aminothiazonaphthalic anhydride derivatives (ATNAs) combined with an iodonium salt, N‐vinylcarbazole, amine, or chloro triazine initiate the ring‐opening cationic polymerization of epoxides and the free radical polymerization of acrylates under LEDs at 405 or 455 nm. The photoinitiating ability of these novel photoinitiating systems is higher than that of the well‐known camphorquinone‐based systems. An example of the high reactivity of the new proposed photoinitiator is also provided in resins for 3D‐printing using a LED projector@405 nm. The chemical mechanisms are investigated by steady‐state photolysis, cyclic voltammetry, fluorescence, laser flash photolysis, and electron spin resonance spin‐trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1189–1196     

Germanes as efficient coinitiators in radical and cationic photopolymerizations

In this article, germanes are presented as new coinitiators for both radical and cationic photopolymerization processes. For the free radical polymerization process, the newly proposed structures are characterized by efficiencies similar or better than the reference amine. Germyl radicals are also found to be excellent initiators for free radical promoted cationic photopolymerization (FRPCP) of an epoxy resin. The associated reactivity is even better under air. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3042–3047, 2008     

Naphthalic anhydride derivatives: Structural effects on their initiating abilities in radical and/or cationic photopolymerizations under visible light

Only one naphthalic anhydride derivative has been reported as light sensitive photoinitiator, this prompted us to further explore the possibility to prepare a new family of photoinitiators based on this scaffold. Therefore, eight naphthalic Naphthalic anhydride derivatives (ANH1‐ANH8) have been prepared and combined with an iodonium salt (and optionally N‐vinylcarbazole) or an amine (and optionally 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine) to initiate the cationic polymerization of epoxides and the free radical polymerization of acrylates under different irradiation sources, that is, very soft halogen lamp (～ 12 mW cm^?2), laser diode at 405 nm (～1.5 mW cm^?2) or blue LED centered at 455 nm (80 mW cm^?2). The ANH6 based photoinitiating systems are particularly efficient for the cationic and the radical photopolymerizations, and even better than that of the well‐known camphorquinone based systems. The photochemical mechanisms associated with the chemical structure/photopolymerization efficiency relationships are studied by steady state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin‐trapping techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2860–2866     

Iron complexes as photoinitiators for radical and cationic polymerization through photoredox catalysis processes

Six iron complexes (FeCs) with various ligands have been designed and synthesized. In combination with additives (e.g., iodonium salt, N‐vinylcarbazole, amine, or chloro triazine), the FeC‐based systems are able to efficiently generate radicals, cations, and radical cations on a near UV or visible light‐emitting diode (LED) exposure. These systems are characterized by an unprecedented reactivity, that is, for very low content 0.02% FeC‐based systems is still highly efficient in photopolymerization contrary to the most famous reference systems (Bisacylphosphine oxide) illustrating the performance of the proposed catalytic approach. This work paves the way for polymerization in soft conditions (e.g., on LED irradiation). These FeC‐based systems exhibit photocatalytic properties, undergo the formation of radicals, radical cations, and cations and can operate through oxidation or/and reduction cycles. The photochemical mechanisms for the formation of the initiating species are studied using steady state photolysis, cyclic voltammetry, electron spin resonance spin trapping, and laser flash photolysis techniques. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 42–49     

Keto-coumarin scaffold for photoinitiators for 3D printing and photocomposites

The purposes of this paper are moving toward (a) the development of a new series of photoinitiators (PIs) which are based on the keto-coumarin (KC) core, (b) the introduction of light-emitting diodes (LEDs) as inexpensive and safe sources of irradiation, (c) the study of the photochemical mechanisms through which the new PIs react using different techniques such as Fourier transform infrared, UV–visible or fluorescence spectroscopy, and so on, (d) the use of such compounds (presenting good reactivity and excellent photopolymerization initiating abilities) for two specific and high added value applications: 3D printing (@405 nm) and preparation of thick glass fiber photocomposites with excellent depth of cure, and finally (e) the comparison of the performance of these KC derivatives versus other synthesized coumarin derivatives. In this study, six well-designed KC derivatives ( KC-C , KC-D , KC-E , KC-F , KC-G , and KC-H ) are examined as high-performance visible-light PIs for the cationic polymerization of epoxides as well as the free-radical polymerization of acrylates upon irradiation with LED@405 nm. Excellent polymerization rates are obtained using two different approaches: a photo-oxidation process in combination with an iodonium (Iod) salt and a photo-reduction process when associated with an amine (N-phenylglycine or ethyl 4-(dimethylamino)benzoate). High final reactive conversions were obtained. A full picture of the involved photochemical mechanisms is provided.     

Azahelicenes as visible light photoinitiators for cationic and radical polymerization: Preparation of photoluminescent polymers and use in high performance LED projector 3D printing resins

In this article, novel azahelicenes (AZs) were synthesized and proposed as high performance visible light photoinitiators for both the free radical polymerization of acrylates and the cationic polymerization (CP) of epoxides upon visible light exposure using Light Emitting Diodes (LEDs) @405, @455, and @470 nm. Excellent polymerization initiating abilities are found and high final conversions were obtained. Remarkably, an exceptional long lifetime photoluminescence property of the polymer films was observed when synthesized in presence of AZs. A full picture of the involved chemical mechanisms is given. AZs being high performance photoinitiators, their use in new cationic LED 3D printing resins will be also presented, that is, the cationic process upon LED projector @405 nm can be useful to reduce the shrinkage usually observed for radical polymerization. LED projector printing is very interesting compared to laser writing as this technology projects the profile of an entire layer of a 3D object at one time. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 55, 1189–1199     

Novel phenylamine-based oxime ester photoinitiators for LED-induced free radical,cationic, and hybrid polymerization

Four new photoinitiators (PI's) containing various phenylamine-based groups as chromophores and oxime ester (OXE) as initiating groups are proposed for the free radical polymerization, the cationic polymerization, and interpenetrated polymer networks upon visible light exposure using a light emitting diodes at 405 nm. These compounds showed outstanding polymerization photoinitiation ability, that is, high-polymerization rates and good final reactive function conversions were obtained. The chemical mechanisms by which these OXE's generate reactive species were investigated through different techniques including real-time Fourier transform infrared spectroscopy, UV–visible spectroscopy, fluorescence (time-resolved or steady state) as well as cyclic voltammetry. Markedly, the proposed structures can be used as thermal initiators indicating all of them can be polymerized under suitable reaction temperature. In addition, due to their high efficiency, these optimized PI's were found to be useful @405 nm for both direct laser write and 3D printing applications.     

Visible light‐emitting diode‐sensitive thioxanthone derivatives used in versatile photoinitiating systems for photopolymerizations

Novel thioxanthone (TX) derivatives are used as versatile photoinitiators upon visible light‐emitting diode (LED; e.g., 405, 425, and 450 nm) exposure. The mechanisms for the photochemical generation of reactive species (i.e., cations and free radicals) produced from photoinitiating systems based on the photoinitiator and an iodonium salt, tris(trimethylsilyl)silane, or an amine, were studied by UV–vis spectroscopy, fluorescence, cyclic voltammetry, steady‐state photolysis, and electron spin resonance spin‐trapping techniques. The reactive species are particularly efficient for cationic, free radical, hybrid, and thiol‐ene photopolymerizations upon LED exposure. The optimized photoinitiating systems exhibit higher efficiency than those of reference systems (i.e., isopropyl TX‐based photoinitiating systems), especially in the visible range. According to their beneficial features, these photoinitiating systems have considerable potential in photocuring applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 4037–4045     

2,2,2‐trifluoroacetophenone‐based D‐π‐A type photoinitiators for radical and cationic photopolymerizations under near‐UV and visible LEDs

Two D‐π‐A‐type 2,2,2‐trifluoroacetophenone derivatives, namely, 4′‐(4‐( N,N‐diphenyl)amino‐phenyl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Ben) and 4′‐(4‐(7‐(N,N‐diphenylamino)‐9,9‐dimethyl‐9H‐fluoren‐2‐yl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Flu), are developed as high‐performance photoinitiators combined with an amine or an iodonium salt for both the free‐radical polymerization of acrylates and the cationic polymerization of epoxides and vinyl ether upon exposure to near‐UV and visible light‐emitting diodes (LEDs; e.g., 365, 385, 405, and 450 nm). The photochemical mechanisms are investigated by UV‐Vis spectra, molecular‐orbital calculations, fluorescence, cyclic voltammetry, photolysis, and electron‐spin‐resonance spin‐trapping techniques. Compared with 2,2,2‐trifluoroacetophenone, both photoinitiators exhibit larger redshift of the absorption spectra and higher molar‐extinction coefficients. PI‐Ben and PI‐Flu themselves can produce free radicals to initiate the polymerization of acrylate without any added hydrogen donor. These novel D‐π‐A type trifluoroacetophenone‐based photoinitiating systems exhibit good efficiencies (acrylate conversion = 48%–66%; epoxide conversion = 85%–95%; LEDs at 365–450 nm exposure) even in low‐concentration initiators (0.5%, w/w) and very low curing light intensities (1–2 mW cm^?2). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1945–1954     

Visible light photopolymerization employing 2,4-diiodo-6-butoxy-3-fluorone and tetraorganylborate salts as photoinitiators

Several new tetraorganylborate salts have been synthesized and tested as coinitiators with 2,4-diiodo-6-butoxy-3-fluorone (DIBF) for the photopolymerization of acrylic monomer mixtures. The rate of photopolymerization has been found to be a function of chemical structure of the borates. Stability, solubility, and reactivity of these borates as coinitiators for photopolymerization have been investigated. Diphenyldialkylborates have been found to be the best among the tested coinitiators. © 1996 John Wiley & Sons, Inc.     

Copper and iron complexes as visible‐light‐sensitive photoinitiators of polymerization

The utilization of visible lights for the fabrication of polymeric materials is recognized as a promising and environmentally friendly approach. This process relies on the photochemical generation of reactive species (e.g., radicals, radical cations, or cations) from well‐designed photoinitiators (PIs) or photoinitiating systems (PISs) to initiate the polymerization reactions of different monomers (acrylates, methacrylates, epoxides, and vinyl ethers). In spite of the fact that metal complexes such as ruthenium‐ or iridium‐based complexes have found applications in organic and polymer synthesis, the search of other low‐cost metal‐based complexes as PISs is emerging and attracting increasing attentions. Particularly, the concept of the photoredox catalysis has appeared recently as a unique tool for polymer synthesis upon soft conditions (use of light emitting diodes and household lamp). This highlight focuses on recently designed copper and iron complexes as PI catalysts in the application of photoinduced polymerizations (radical, cationic, interpenetrated polymer networks, and thiol‐ene) or controlled radical polymerization under visible light irradiation. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2673–2684     

Silyl glyoxylates as high‐performance photoinitiators for cationic and hybrid polymerizations: Towards better polymer mechanical properties

Silyl glyoxylates are proposed here as high‐performance photoinitiators (PIs) for the hybrid polymerization of cationic and radical monomers. Recently, silyl glyoxylates were reported as a new class of high‐performance Type I photoinitiators for free radical polymerization under air upon exposure to different near‐UV and blue LEDs. In this article, we report this new class of photoinitiators to initiate cationic polymerization in combination with an iodonium salt. This system can also be used to initiate simultaneously free radical and cationic polymerizations, for example, for the free radical/cationic hybrid polymerization and for the synthesis of interpenetrating polymer networks. The system silyl glyoxylate/iodonium exhibits excellent polymerization performances and exceptional bleaching properties compared to other well established photoinitiators (e.g., camphorquinone). Furthermore, a hybrid monomer is also introduced in this article (2‐vinyloxyethoxyethyl methacrylate [VEEM]) leading to a huge improvement of the mechanical properties of the final polymer through hybrid polymerization. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1420–1429     

Benzophenone derivatives as novel organosoluble visible light Type II photoinitiators for UV and LED photoinitiating systems

Five organosoluble visible light benzophenone derivatives ( BPs ), incorporated different arylamine as electron donating groups have been synthesized and investigated for their roles as photoinitiating systems for free radical photopolymerization of acrylate monomer upon the UV and LED exposure. All the target compounds ( BP-1 – 5 ) have confirmed through ¹H NMR, HR-MS/EI-MS spectra and elemental analysis. BPs displayed red-shifted absorption, higher molar extinction coefficient and better thermal properties as compared to reference benzophenone (BP) compound. BP and BPs in combination with hydrogen donor, triethylamine (TEA), are prepared and investigated their electron spin resonance (ESR) spectroscopy and photo-DSC (photo-differential scanning calorimetry). ESR spectra of BP-1 /TEA package showed the highest radical intensity among the test photoinitiator packages. In addition, BP-1- based formulation exhibited the best double bond conversion efficiency than other BPs and comparable to the BP for the free radical polymerization (FRP) of TMPTA under similar UV light source. We then selected BP-1 /TEA and BP/TEA package for FRP under LED light irradiation. Interesting, the BP-1 /TEA system exhibited better efficiency and shorter time at maximum heat flow than BP/TEA. This result indicates BP-1 photoinitiator not only displays good light harvesting, thermal property, but exhibits conversion efficiency under the irradiation of UV and LED.     

Monitoring photopolymerization reactions through thermal imaging: A unique tool for the real‐time follow‐up of thick samples, 3D printing,and composites

The ever increasing applications of photopolymers from historical thin (<50 µm) coatings to very deep samples (>1 cm) require the development of robust 4D monitoring strategies able to assess photopolymerization efficiencies (first dimension) as a function of time (second dimension) and position (third and fourth dimensions). Therefore, here, we demonstrated that thermal imaging is a valuable photopolymerization monitoring device showing: (a) very high response times (<1 s); (b) high repeatability of the measurement; (c) strong adaptability of the setup to various conditions (e.g., onto irregular surfaces or inside a real time Fourier transformed infrared spectrometer (RT‐FTIR)); (d) extremely deep photopolymerization follow‐ups (and subsequent rationalization) with good resolution in time and in space (real‐time thermal imaging microscopy experiments); (e) adaptability to applied materials. This monitoring strategy was found particularly robust when taking into account all the heat generating phenomena (i.e., direct heating from the lamp vs. temperature raised due to monomer conversion). As a result, we propose thermal imaging as the next reference monitoring system for the new ranges of thick and/or filled samples (e.g., 3D objects, composites) and/or applied photopolymerizations (e.g., 3D printing) more and more present in the literature. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 889–899     

Evaluation of initiator systems for controlled and sequentially curable free‐radical/cationic hybrid photopolymerizations

Free‐radical/cationic hybrid photopolymerizations of acrylates and epoxides were initiated using a three‐component initiator system comprised of camphorquinone as the photosensitizer, an amine as the electron donor, and a diaryliodonium salt. Thermodynamic considerations revealed that the oxidation potential of the electron donor must be less than 1.34 V relative to SCE for electron transfer with the photoexcited camphorquinone to take place. This electron transfer leads to the production of the active centers for the hybrid polymerization (two radicals and a cation). Further investigation revealed that only a subset of electron donors that meet the oxidation potential requirement resulted in polymerization of the epoxide monomer; therefore, a second requirement for the electron donor (pK_b higher than 8) was established. Experiments performed using a combination of electron donors revealed that the onset of the hybrid system's cationic polymerization can be advanced or delayed by controlling the concentration and composition of the electron donor(s). These studies demonstrate that a single three‐component initiator system can be used to initiate and chemically control the sequential curing properties of a free‐radical/cationic hybrid photopolymerization and is a viable alternative to separate photoinitiators for each type of polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1747–1756, 2005     

Iodonium‐polyoxometalate and thianthrenium‐polyoxometalate as new one‐component UV photoinitiators for radical and cationic polymerization

Four novel onium salts (onium‐polyoxometalate) have been synthesized and characterized. They contain a diphenyliodonium or a thianthrenium (TH) moiety and a polyoxomolybdate or a polyoxotungstate as new counter anions. Outstandingly, these counter anions are photochemically active and can sensitize the decomposition of the iodonium or TH moiety through an intramolecular electron transfer. The phenyl radicals generated upon UV light irradiation (Xe–Hg lamp) are very efficient to initiate the radical polymerization of acrylates. Cations are also generated for the cationic polymerization of epoxides. Remarkably, these novel iodonium and TH salts are characterized by a higher reactivity compared with that of the diphenyliodonium hexafluorophosphate and the commercial TH salt, respectively. Interpenetrating polymer networks can also be obtained under air through a concomitant cationic/radical photopolymerization of an epoxy/acrylate blend (monomer conversions > 65%). The photochemical mechanisms are studied by steady‐state photolysis, cyclic voltammetry, and electron spin resonance techniques. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 981–989     

Use of α‐diketones as visible photoinitiators for the photocrosslinking of waterborne latex paints

The efficiency of several α‐diketones as visible light photoinitiators for the crosslinking of waterborne latex dispersions in the presence of acrylic monomers was evaluated. Among the eight α‐diketones studied, camphorquinone allows the fastest curing speed, and the curing of the acrylic waterborne coating is not affected by the presence of oxygen. The properties of the sunlight‐cured volatile organic compound (VOC)‐free pigmented paints prepared from the waterborne latex are as good or better than the equivalent conventional paint containing VOCs. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3171–3181, 2002     

Diphenylphenacyl sulfonium salt as dual photoinitiator for free radical and cationic polymerizations

Diphenylphenacylsulfonium tetrafluoroborate (DPPS⁺BF^4–) salt possessing both phenacyl and sulfonium structural units was synthesized and characterized. DPPS⁺BF^4– absorbs light at relatively higher wavelengths. The direct and sensitized initiation activity of the salt in both cationic and free radical photopolymerizations was investigated and compared with that of its analogue triphenylsulfonium tetrafluoroborate (TPS⁺BF^4–). Differential scanning photocalorimetry and conventional gravimetric studies revealed that DPPS⁺BF^4– showed higher efficiency for direct and sensitized photopolymerizations of most of the monomers investigated. Although, principally both homolytic and/or heterolytic cleavage is possible, theoretical studies suggested that homolytic pathway is more favored for the generation of reactive initiating species. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 451–457     

Photochemistry and photopolymerization activity of p-nitroaniline in the presence of N,N-dimethylaniline as a bimolecular photoinitiator system

The photoreduction behavior of p-nitroaniline (pNA) in the presence of N,N-dimethylaniline (DMA) induced by both steady-state (365 nm) and laser (337 nm) irradiation has been analyzed. The stoichiometry of the photoreduction reaction revealed that several amino radicals derived from DMA were generated by each photoreduced pNA molecule. The polymerization kinetics of the lauryl acrylate monomer (LA) photoinitiated by the pNA/DMA system has been studied by differential scanning photocalorimetry (Photo-DSC). The rate of polymerization was found to be proportional to the square root of both the incident light and the coinitiator DMA concentration. The order of the polymerization reaction with respect to monomer and initiator concentration was determined, as well as the polymerization behavior under aerobic conditions. The polymerization efficiency of this photoinitiated system was much higher than that obtained with conventional aromatic ketone photoinitiators. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3801–3812, 1997     

Dual roles for promoting monomers to polymers: A conjugated sulfonium salt photoacid generator as photoinitiator and photosensitizer in cationic photopolymerization

An efficient strategy for comprehensive utilization of the conjugated sulfonium salt photoacid generator (PAG), namely, 3‐{4‐[4‐(4‐N,N′‐diphenylamino)‐styryl]phenyl}phenyl dimethyl sulfonium hexafluoroantimonate, was developed through photoinitiated cationic photopolymerization (CP) of epoxides and vinyl ether upon exposure to near‐UV and visible light‐emitting diodes (LEDs; e.g., 365, 385, 405, and 425 nm). Photochemical mechanisms were investigated by UV–vis spectra, molecular orbital calculations, fluorescence, cyclic voltammetry, and electron spin resonance spin‐trapping analyses. Compared with commercial PAGs, the prepared conjugated sulfonium salt generated H⁺, which can be used as photoinitiator. Moreover, the fluorescent byproducts from photodecomposition can be used as photosensitizer of commercial iodonium salt in the photoinitiating systems of CP. These novel D‐π‐A type sulfonium‐based photoinitiating systems are efficient (epoxide conversion = 85–90% and vinyl conversion >90%; LEDs upon exposure to 365–425 nm) even in low‐concentration initiators (1%, w/w) and low curing light intensities (10–40 mW cm^?2). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 2722–2730