Combined analysis methods for investigating titanium and nickel surface contamination after plasma deep etching

Plasma etching techniques can result in damage and contamination of materials, which, if not removed, can interfere with further processing. Therefore, characterisation of the etched surface is necessary to understand the basic mechanisms involved in the etching process and enable process control and cleaning procedures to be developed. A detailed investigation by means of the combined use of scanning electron microscopy coupled with energy-dispersive X-ray spectrometry (SEM/EDS), X-ray photoelectron spectroscopy (XPS) and optical microscopy (OM) has been carried out on deep titanium trenches etched by plasma. This innovative approach has provided a further insight into the microchemical structure of the surface contamination layer on both the titanium and the nickel hard mask surfaces. The described experiments were conducted on 25 to 100-μm wide trenches, first etched in bulk titanium by an optimised Cl₂/SF₆/O₂-based inductively coupled plasma process, through an electroplated nickel hard mask. The results allow to identify chlorine, fluorine and carbon as the main contaminating agents of the nickel mask and to associate three oxidation states around the etched trenches highlighting certain specific aspects related to the passivation mechanism. These observations reinforce the scientific relevance of the combined use of complementary optical and imaging analytical techniques.     

The effect of glow discharge sputtering on the analysis of metal oxide films

The potential of radiofrequency glow discharge optical emission spectrometry (rf-GD-OES) for the quantification and the solid-state speciation of metal oxide films has been investigated in this work. Two types of oxide coatings, an iron oxide film deposited on silicon and a chromate conversion coating (CCC), were studied at 700 Pa of pressure and 30 W of forward power. The metal to oxygen ratios in the quantitative depth profiles (Fe/O and Cr/O, respectively) were used to evaluate the oxidation states of iron and chromium in the oxide films, demonstrating the capability of GD-OES technique for depth-resolved solid-state speciation. Furthermore, the effect of glow discharge sputtering on the samples surface in terms of modifications in the surface morphology and species transformations, were investigated by using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The iron and chromium oxidation states were carefully studied by XPS at the original samples surface and at the bottom of GD craters, and a systematic reduction of metal elements was observed after rf-GD-OES analysis. In the case of thin oxide films, preferential sputtering can be considered as a critical factor since oxygen atoms can be preferentially sputtered, leaving a metal-enriched surface and, therefore, promoting the reduction of metal elements. In the present study preferential sputtering was found to be sample dependent, changing the proportion of the metal reduction in the oxide film with its composition. Additionally, alternative sputter-depth-profiling techniques such as secondary ion mass spectrometry (SIMS), femtosecond laser ablation (fs-LA), and XPS ion gun were used for the analysis of the CCC in order to evaluate the reduction of Cr⁶⁺ to Cr³⁺ depending on the sputtering mechanism.     

Influence of the Oxide Content in the Catalytic Power of Raney Nickel in Hydrogen Generation

The influence of oxides in the hydrogen evolution on Raney nickel electrocatalysts was characterized by electrochemical impedance measurements. In addition, these materials show competitive overpotentials for hydrogen evolution with a modified Watts bath as a binder for the Raney nickel. The optimum result was ?190?mV of overpotential at 100?mA?cm^?2. Oxygen in the Raney Ni catalyst affects its electroactivity toward hydrogen evolution. The source of oxygen is related to the presence of chloride ions in the modified Watts bath. A Watts bath binds Raney Ni particles to the surface of the catalysts and chloride regulates the oxygen content in the nickel binder during electrodeposition. High oxygen content increases the hydrogen evolution overpotential of the electrode. The electroactivity of the synthesized porous coatings was evaluated by polarization curves and impedance plots. In addition, surface characterization by X-ray diffraction, field emission–scanning electron microscopy equipped with energy-dispersive analysis, and X-ray photoelectron spectroscopy is reported.     

Surface analysis of epitaxially grown GeSn alloys with Sn contents between 15% and 18%

Metastable Germanium–tin (GeSn) layers with rather high Sn content between 15% and 18% grown on Si substrates by molecular beam epitaxy were analyzed for the morphological changes on a surface before and after reaching critical layer parameters (thickness, Sn content, and growth temperature) for surface roughening. Atomic‐force microscopy investigations were performed as a function of thickness and separately for varying Sn concentrations in the GeSn layer. Epitaxial growth of metastable, uniform GeSn (15% Sn content) layers is obtained up to a critical thickness which increases from about 80 to above 200 nm by reducing the nominal growth temperature from 160 to 140 °C. Phase separation of the complete layer into tin‐rich surface protrusions and a Ge‐rich matrix takes place beyond the critical thickness. This surface roughening via phase separation was not observed in earlier investigations with lower Sn concentrations (<6%). Tin depletion in the GeSn matrix was confirmed by using energy‐dispersive X‐ray spectroscopy measurements showing residual Sn concentration below 5%. Additionally, creation of droplets with high concentration of tin on the surfaces was confirmed by energy‐dispersive X‐ray spectroscopy. Copyright © 2016 John Wiley & Sons, Ltd.     

XPS studies of octadecylphosphonic acid (OPA) monolayer interactions with some metal and mineral surfaces

Partial and complete self‐assembled monolayers (SAMs) of octadecylphosphonic acid (OPA) have been deposited onto air‐exposed surfaces of the metals copper, silver, gold, iron, silicon and aluminium, as well as onto freshly cleaved, air‐exposed surfaces of the minerals muscovite and biotite. The line width of the C(1s) signal in the XPS spectra of the surface narrowed, as the extent of coverage increased to 100%, to a half‐width of 0.9 eV. Moreover, the line widths associated with the insulating muscovite substrate also became substantially narrower as OPA coverage increased. Binding energy differences on this charge‐shifted surface were found to be more consistent when OPA was used as a charge reference, compared to using adventitious carbon as a reference. OPA coverage of the air‐exposed metals copper, silver, gold and iron also produced narrow C(1s) spectra whose binding energies were consistently close to 284.9 eV. The C(1s) binding energy positions on Al and Si samples were charge‐shifted by the insulating nature of the thin oxide formed on air exposure, or by the insulating nature of the substrate in the case of the minerals. Correction of the observed C(1s) energy position to 284.9 eV gave sets of elemental binding energies for the substrate materials that were reproducible. Thus, OPA coverage could be a possible alternative candidate for use in charge correction of binding energies of insulating materials. The OPA coverage cases were modelled using the software QUASES^? Analyse. For the substrates copper, silver, gold, iron and aluminium, analyses of the metal core line spectra gave OPA overlayer thicknesses close to those measured by AFM (1.6 nm). However, QUASES^? analyses of the C(1s) extrinsic backgrounds for the same surfaces required the use of an attenuation length of only 0.4 nm to derive a comparable thickness—much lower than literature values for carbon. This discrepancy is ascribed to the structured nature of the SAM. Copyright © 2005 John Wiley & Sons, Ltd.     

Properties and characterization of hydrophobized microfibrillated cellulose

Microfibrillated cellulose (MFC) obtained by disintegration of bleached softwood sulphite pulp in a homogenizer, was hydrophobically modified by surface silylation with chlorodimethyl isopropylsilane (CDMIPS). The silylated MFC was characterized by Fourier transform infrared spectroscopy (FT-IR), atomic force microscopy (AFM), transmission electron spectroscopy (TEM), X-ray photoelectron spectroscopy (XPS) and white light interferometry (WLI). The degree of surface substitution (DSS) was determined using Si concentrations from XPS survey scans, as well as deconvoluted peaks in high-resolution C1s XPS spectra. The DSS values obtained by the two methods were found to be in good agreement. MFC with DSS between 0.6 and 1 could be dispersed in a non-flocculating manner into non-polar solvents, TEM observations showing that the material had kept its initial morphological integrity. However, when CDMIPS in excess of 5 mol CDMIPS/glucose unit in the MFC was used, partial solubilization of the MFC occurred, resulting in a drop in the observed DSS and a loss of the microfibrillar character of the material. The wetting properties of films cast from suspension of the silylated MFC were also investigated. The contact angles of water on the films increased with increasing DSS of the MFC, approaching the contact angles observed on super hydrophobic surfaces for the MFC with the highest degree of substitution. This is believed to originate from a combination of low surface energy and surface microstructure in the films.     

Lactic acid bacteria in dairy food: Surface characterization and interactions with food matrix components

This review gives an overview of the importance of interactions occurring in dairy matrices between Lactic Acid Bacteria and milk components. Dairy products are important sources of biological active compounds of particular relevance to human health. These compounds include immunoglobulins, whey proteins and peptides, polar lipids, and lactic acid bacteria including probiotics. A better understanding of interactions between bioactive components and their delivery matrix may successfully improve their transport to their target site of action. Pioneering research on probiotic lactic acid bacteria has mainly focused on their host effects. However, very little is known about their interaction with dairy ingredients. Such knowledge could contribute to designing new and more efficient dairy food, and to better understand relationships between milk constituents. The purpose of this review is first to provide an overview of the current knowledge about the biomolecules produced on bacterial surface and the composition of the dairy matter. In order to understand how bacteria interact with dairy molecules, adhesion mechanisms are subsequently reviewed with a special focus on the environmental conditions affecting bacterial adhesion. Methods dedicated to investigate the bacterial surface and to decipher interactions between bacteria and abiotic dairy components are also detailed. Finally, relevant industrial implications of these interactions are presented and discussed.     

Recent advances in the use of graphene-family nanoadsorbents for removal of toxic pollutants from wastewater

Adsorption technology is widely considered as the most promising and robust method of purifying water at low cost and with high-efficiency. Carbon-based materials have been extensively explored for adsorption applications because of their good chemical stability, structural diversity, low density, and suitability for large scale production. Graphene – a single atomic layer of graphite – is the newest member in the family of carbon allotropes and has emerged as the “celeb” material of the 21st century. Since its discovery in 2004 by Novoselov, Geim and co-workers, graphene has attracted increased attention in a wide range of applications due to its unprecedented electrical, mechanical, thermal, optical and transport properties. Graphene's infinitely high surface-to-volume ratio has resulted in a large number of investigations to study its application as a potential adsorbent for water purification. More recently, other graphene related materials such as graphene oxide, reduced graphene oxide, and few-layered graphene oxide sheets, as well as nanocomposites of graphene materials have also emerged as a promising group of adsorbent for the removal of various environmental pollutants from waste effluents. In this review article, we present a synthesis of the current knowledge available on this broad and versatile family of graphene nanomaterials for removal of dyes, potentially toxic elements, phenolic compounds and other organic chemicals from aquatic systems. The challenges involved in the development of these novel nanoadsorbents for decontamination of wastewaters have also been examined to help identify future directions for this emerging field to continue to grow.     

Determination of engineered nanoparticles on textiles and in textile wastewaters

Textile materials with engineered nanoparticles (ENPs) have excellent properties as they are antibacterial, antimicrobial, water resistant and protective. The textile industry has recognized the importance and the advantages of ENPs, so they comprise one of the fastest developing branches of processing.The most important sources of ENPs released to the environment from textiles are textile-industry wastewaters and waters from large hospital or hotel laundries. In addition, waste textile materials coated with ENPs present a threat to the environment, if such materials are not properly handled and disposed of after use.Currently, the toxicity and the potential harm of ENPs widely applied on textiles are not thoroughly investigated and/or eliminated. Consequently, there is an urgent need to define the most appropriate analytical methods for monitoring ENPs on textiles.This review presents the most important techniques for monitoring ENPs on textile materials and in textile-wastewater samples, from the perspective of protecting the environment and human health.     

Carbon nanotubes as solid-phase extraction sorbents prior to atomic spectrometric determination of metal species: A review

New materials have significant impact on the development of new methods and instrumentation for chemical analysis. From the discovery of carbon nanotubes in 1991, single and multi-walled carbon nanotubes – due to their high adsorption and desorption capacities – have been employed as sorption substrates in solid-phase extraction for the preconcentration of metal species from diverse matrices. Looking for successive improvements in sensitivity and selectivity, in the past few years, carbon nanotubes have been utilized as sorbents for solid phase extraction in three different ways: like as-grown, oxidized and functionalized nanotubes. In the present paper, an overview of the recent trends in the use of carbon nanotubes for solid phase extraction of metal species in environmental, biological and food samples is presented. The determination procedures involved the adsorption of metals on the nanotube surface, their quantitative desorption and subsequent measurement by means of atomic spectrometric techniques such as flame atomic absorption spectrometry, electrothermal atomic absorption spectrometry or inductively coupled plasma atomic emission spectrometry/mass spectrometry, among others. Synthesis, purification and types of carbon nanotubes, as well as the diverse chemical and physical strategies for their functionalization are described. Based on 140 references, the performance and general properties of the applications of solid phase extraction based on carbon nanotubes for metal species atomic spectrometric determination are discussed.     

Characterization of carbon nanotubes and analytical methods for their determination in environmental and biological samples: A review

In the present paper, a critical overview of the most commonly used techniques for the characterization and the determination of carbon nanotubes (CNTs) is given on the basis of 170 references (2000–2014). The analytical techniques used for CNT characterization (including microscopic and diffraction, spectroscopic, thermal and separation techniques) are classified, described, and illustrated with applied examples. Furthermore, the performance of sampling procedures as well as the available methods for the determination of CNTs in real biological and environmental samples are reviewed and discussed according to their analytical characteristics. In addition, future trends and perspectives in this field of work are critically presented.     

An overview of lipid membrane supported by colloidal particles

In recent years, original hybrid assemblies composed of a particle core surrounded by a lipid shell emerged as promising entities for various biotechnological applications. Their broadened bio-potentialities, ranging from model membrane systems or biomolecule screening supports, to substance delivery reservoirs or therapeutic vectors, are furthered by their versatility of composition due to the possible wide variation in the particle nature and size, as well as in the lipid formulation. The synthesis, the characteristics, and the uses of these Lipid/Particle assemblies encountered in the literature so far are reviewed, and classified according to the spherical core size in order to highlight general trends. Moreover, several criteria are particularly discussed: i) the interactions involved between the particles and the lipids, and implicitly the assembly elaboration mechanism, ii) the most suited techniques for an accurate characterization of the entities from structural and physicochemical points of view, and iii) the remarkable properties of the solid-supported lipid membrane obtained.     

Interactions of DNA with graphene and sensing applications of graphene field-effect transistor devices: A review

Graphene field-effect transistors (GFET) have emerged as powerful detection platforms enabled by the advent of chemical vapor deposition (CVD) production of the unique atomically thin 2D material on a large scale. DNA aptamers, short target-specific oligonucleotides, are excellent sensor moieties for GFETs due to their strong affinity to graphene, relatively short chain-length, selectivity, and a high degree of analyte variability. However, the interaction between DNA and graphene is not fully understood, leading to questions about the structure of surface-bound DNA, including the morphology of DNA nanostructures and the nature of the electronic response seen from analyte binding. This review critically evaluates recent insights into the nature of the DNA graphene interaction and its affect on sensor viability for DNA, small molecules, and proteins with respect to previously established sensing methods. We first discuss the sorption of DNA to graphene to introduce the interactions and forces acting in DNA based GFET devices and how these forces can potentially affect the performance of increasingly popular DNA aptamers and even future DNA nanostructures as sensor substrates. Next, we discuss the novel use of GFETs to detect DNA and the underlying electronic phenomena that are typically used as benchmarks for characterizing the analyte response of these devices. Finally, we address the use of DNA aptamers to increase the selectivity of GFET sensors for small molecules and proteins and compare them with other, state of the art, detection methods.     

Fluoropolymer materials and architectures prepared by controlled radical polymerizations

This review initially summarizes the mechanisms, merits and limitations of the three controlled radical polymerizations: nitroxide mediated polymerization (NMP), atom transfer radical polymerization (ATRP) or metal catalyzed living radical polymerization, and reversible addition-fragmentation chain transfer (RAFT) polymerization. This is followed by two parts, one dealing with homo- and copolymerizations of fluorinated methacrylates and acrylates, and a second where fluorinated styrenes, alone or in combination with other monomers, are the main issues. In these parts, initiators (including multifunctional and macroinitiators), ligands and other reaction conditions as well as some kinetics and conversions are discussed. Numerous possibilities for preparation of a variety of different block copolymers where one or more blocks are fluorinated are devoted particular attention. The advantageous properties and functionalities that can be obtained from these novel fluorinated materials and architectures are especially emphasized. Thus, various amphiphilic, biocompatible or low energy materials, fluorinated nanoparticles and nanoporous films/membranes as well as materials for submicron and nanolevel electronics have been fabricated. In addition, the possible fluorination of various surfaces through surface initiation is highlighted. A final part deals with the use of fluorine containing initiators and macroinitiators, and the applications on the novel materials derived thereof.