Nondestructive analysis of ancient Egyptian funerary relics by Raman spectroscopic techniques

The non-destructive Raman spectroscopic analysis of a range of ancient Egyptian funerary artefacts has been undertaken with a view to establish the identification of the pigment composition and nature of the interaction with the substrate. The specimens date from the New Kingdom to the Graeco-Roman period, ca. 3900-1800 years b.p. In this study a comparison has also been effected between the near-infrared and red excitation wavelengths for the characterisation of these materials. A particular problem for Raman analysis of these artefacts was found in the application of resin or organic compounds to the surface or substrata, as colourants or to aid adhesion of the pigments, and degradation of the resins with burial environment and exposure has resulted in large fluorescent backgrounds. Nevertheless, useful information has been obtained which assists in the interpretation of the construction of some of the artefacts.     

Comparative Raman spectroscopy study of sulfonate-substituted triphenylphosphines

A comparative Raman spectroscopy study of triphenylphosphine (TPP), monosulfonated triphenylphosphine (TPPMS) and trisulfonated triphenylphosphine (TPPTS) is reported. The characteristic modes for each molecule were evidenced and we suggest assignments for the majority of the modes. A detailed study of the phenyl breathing mode (around 1000 cm⁻¹) shows that in the case of TPP, the three rings are nonequivalent, whereas for TPPTS, the sulfonate substituant seems to contribute to stabilise the molecule structure so as the rings are equivalent. The TPPMS spectrum is a medium case between the extreme cases of TPP and TPPTS and presents the characteristics of the two previous spectra.     

A comparative study of single-walled carbon nanotube purification techniques using Raman spectroscopy

Raman spectroscopy has been utilized to show the increase of single-walled carbon nanotubes (SWCNTs) content in commercial grade samples synthesized by the chemical vapour deposition (CVD) technique with a minimization of impurities using both hydrochloric acid treatment and surfactant purification. Surfactant purification methods proved to be the most effective, resulting in a three-fold increase in the percentage of SWCNTs present in the purified product as determined by Raman spectroscopy.     

Fission Gas Bubbles Characterisation in Irradiated UO2 Fuel by SEM, EPMA and SIMS

The behaviour of gases produced by fission is of great importance for nuclear fuel operation. Within this context, an experimental method for the characterisation of the fission gas including gas bubbles in an irradiated UO₂ nuclear fuel was developed in our laboratory using SIMS, EPMA and SEM results. SIMS and EPMA have been used to measure the radial distribution of xenon and SEM gives information on bubble formation across the fuel pellet radius. Using SIMS, xenon concentration can be determined in the matrix and in the bubbles. A quantification method, allowing the determination of the total inventory of xenon, is proposed and qualified with EPMA results. It is concluded that the complementary micro-analytical techniques SIMS, EPMA and SEM are very powerful tools for the characterisation of the fission gas bubbles in irradiated nuclear fuel.     

Nature of light-absorbing pigments from Brazilian lichens identified by Raman spectroscopy

Light-absorbing pigments from different chemical classes have been identified from the lichens Usnea sp. and Crocodia aurata using Raman spectroscopy supported by quantum mechanical DFT calculations. Raman spectra were obtained directly from the lichen tissues as well as from isolated extracts. Usnic acid, a chemomarker of Usnea spp has been reported together with a minor constituent, namely stictic acid, which has been unambiguously identified by ¹H and ¹³C NMR spectral analysis. The structures of calycin and pulvinic dilactone isolated from Crocodia aurata have been confirmed by single crystal X-ray diffraction. The ubiquitous carotenoids have been characterized by FT-Raman and dispersive Raman microimaging in tissues of Usnea sp. and C. aurata, respectively. The Raman map has revealed the presence of a mixture of carotenoids heterogeneously distributed in the upper layer of C. aurata. In this work we have demonstrated that Raman spectroscopy can be used to monitor aromatic and conjugated polyenic pigments in different layers of lichen tissues.     

Studies of wall painting fragments from Kaiping Diaolou by SEM/EDX, micro Raman and FT-IR spectroscopy

The multi-technique analytical approach has proved to be a very effective tool for the analysis of artwork, as demonstrated by various studies. In this work, four micro-analysis methods were used to analyze the wall painting fragments in Kaiping Diaolou, a world cultural heritage enlisted in 2007. Field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray micro-analysis (EDX), combined with micro Raman and Fourier transform infrared (FT-IR) spectroscopy, provided a vast amount of information concerning the raw materials present in the pigments, organic binder, plasters and mortars of the wall painting. Four types of pigments (goethite, lazurite, chromium green and calcite) were identified on the surface layer of the wall paintings. The substrate under the pigment layer was found to be composed of cubic-like calcite (CaCO₃), micro-rod bundle-shaped syngenite (K₂Ca(SO₄)₂·H₂O), gypsum (CaSO₄·2H₂O) and silica (SiO₂). The organic binder can be attributed to animal glue (such as egg) and drying oil by micro FT-IR spectroscopy. These analysis results can provide important information for the conservation and restoration of the Kaiping Diaolou.     

Aurichalcite – An SEM and Raman spectroscopic study

Raman spectroscopy complimented with supplementary infrared spectroscopy has been used to characterise the vibrational spectrum of aurichalcite a zinc/copper hydroxy carbonate (Zn,Cu²⁺)₅(CO₃)₂(OH)₆. XRD patterns of all specimens show high orientation and indicate the presence of some impurities such as rosasite and hydrozincite. However, the diffraction patterns for all samples are well correlated to the standard reference patterns. SEM images show highly crystalline and ordered structures in the form of micron long fibres and plates. EDAX analyses indicate variations in chemical composition of Cu/Zn ratios ranging from 1/1.06 to 1/2.87. The symmetry of the carbonate anion in aurichalcite is C_s and is composition dependent. This symmetry reduction results in multiple bands in both the symmetric stretching and bending regions. The intense band at 1072 cm⁻¹ is assigned to the ν₁(CO₃)²⁻ symmetric stretching mode. Three Raman bands assigned to the ν₃(CO₃)²⁻ antisymmetric stretching modes are observed for aurichalcite at 1506, 1485 and 1337 cm⁻¹. Multiple Raman bands are observed in 800–850 cm⁻¹ and 720–750 cm⁻¹ regions and are attributed to ν₂ and ν₄ bending modes confirming the reduction of the carbonate anion symmetry in the aurichalcite structure. An intense Raman band at 1060 cm⁻¹ is attributed to the δ OH deformation mode.     

Application of surface science techniques to study a gilded Egyptian funerary mask: A multi-analytical approach

A wide range of analytical techniques has been used to study an Egyptian funerary mask of the Ptolemaic period (305-30 bc ). Secondary electron (SE) and back-scattering (BS) images, recorded by a scanning electron microscope (SEM), provided a detailed representation of the metallurgical techniques used to construct the gilded mask. It is confirmed, that the golden leaf used to cover the mask is the product of an antique refinery practice, so called, cementation process of naturally occurring alloy of gold and silver, namely electrum. Complementary results of SEM-electron dispersion spectroscopy (EDS) and electron probe microanalysis (EPMA)–wavelength dispersion spectroscopy (WDS) provided chemical compositions of the golden leaf as well as in the plaster base of the mask. X-ray photoemission spectroscopy (XPS) revealed the presence of Au, Ag, Si, S, Cl, Ca, and N, in addition to O and C. Relative concentration of Au/Ag at the surface has been measured by XPS to be 70% to 30%. XPS depth profiling verified silver-enrichment at the surface, as ratio of gold to silver is measured to be 80% to 20% at the depth of 15 nm. XPS chemical mapping images of gold and silver confirmed a rather inhomogeneous character of Au/Ag relative concentration at the surface. The main diffraction peaks in the X-ray diffraction (XRD) spectrum coincide with diffraction peaks of pure gold, silver metals, and magnesium calcite Mg_0.03Ca_0.97CO₃. Whereas, Raman spectroscopy results implied the existence of Ag₂S, a tarnishing compound, on the golden area of the mask.     

Fast determination of milk fat content using Raman spectroscopy

In our work, we have demonstrated the capability of VIS Raman spectroscopy in combination with partial least square regression (PLS) as a rapid technique for direct milk fat determination. Raman spectra of milk samples revealed contributions from proteins, but mainly from their fat content with different spectral characteristics. Three different methods of sample preparations were applied: (i) liquid milk contained in an open dish, (ii) dried milk droplets on glass plates covered with Al foil, and (iii) liquid milk contained in quartz cuvettes. Methods (i) and (ii) showed a good PLS model for milk fat prediction with low root mean square errors and high correlation coefficients. The main advantage of milk sample contained in the dish lies in its simplicity as well as the fact that the open container maximizes the signal of interest avoiding background contributions. Our results show that Raman spectroscopy is suited for in-line monitoring purposes.     

Characterization of green copper phase pigments in Egyptian artifacts with X-ray absorption spectroscopy and principal components analysis

The characterization of materials in historical artifacts can contribute significantly to their preservation and understanding; however, sampling and characterization are ideally performed using non-destructive approaches. The analysis of green pigments from Egyptian artifacts presents a further challenge as responses to laboratory based techniques have proven unsuccessful in many cases. An alternative approach is the use of non-destructive X-ray absorption near-edge structure spectroscopy, which was performed on a reference set of copper-containing green minerals and other compounds. Data projection using principal component analysis was used to explore the spectral data structures and to illustrate the relationship between the spectra and copper speciation, resulting in a calibration or training set of the reference materials used. Data from the training set were compared with samples from Egyptian artifacts. The combination of X-ray absorption spectroscopy with principal components analysis provides a novel approach in archeometry and the characterization of objects of cultural heritage.     

Direct, non-destructive quantitative measurement of an active pharmaceutical ingredient in an intact capsule formulation using Raman spectroscopy

The active pharmaceutical ingredient (ambroxol) in an intact capsule formulation has been non-destructively quantified using Raman spectroscopy. To improve the problem of insufficient representive sampling inherent in Raman measurements, we have employed a wide area illumination (WAI) scheme that enables much improved sample coverage through a circular excitation laser spot with a 6 mm diameter. One of the anticipated sources of variation for this measurement was variation in the capsule shells. However, the WAI scheme significantly decreased the spectral variation among empty capsules compared to a measurement with a traditional small-spot excitation. Therefore, measurement variations emanating from the capsule shell did not significantly influence the accuracy of the determination of ambroxol concentrations. The resulting standard error of prediction (SEP) using the WAI scheme was comparable to that from previous Raman measurements which used a conventional small-spot excitation and employed a sampling scheme that involved rotation of an ambroxol pellet. It is further noteworthy that the SEP was also similar to that obtained from the use of transmission NIR spectroscopy, which was achieved by collection of spectra of the powdered capsule contents removed from the shell. The proposed Raman measurement using the WAI scheme in this case was sufficient to achieve the quantitative measurement of the active pharmaceutical ingredient (API) content of capsules non-destructively.     

Advances in surface-enhanced Raman spectroscopy for analysis of pharmaceuticals: A review

Recently, Raman spectroscopy become a popular and potential analytical technique for the analysis of pharmaceuticals as a result of its advancement. The innovation of laser technology, Fourier Transform-Raman spectrometers with charge coupled device (CCD) detectors, ease of sample preparation and handling, mitigation of sub-sampling problems using different geometric laser irradiance patterns and invention of different optical components of Raman spectrometers are contributors of the advancement of Raman spectroscopy. Transmission Raman Spectroscopy is a useful tool in pharmaceutical analysis to address the problems related with sub-sampling in conventional Raman back scattering. More importantly, the development of surface-enhanced Raman scattering (SERS) has been a prominent advancement for Raman spectroscopy to be applied for pharmaceuticals analysis as it avoids the inherent insensitivity and fluorescence problems. As the active pharmaceutical ingredients (APIs) contain aromatic or conjugated domains with strong Raman scattering activity, Raman spectroscopy is an attractive alternative conventional analytical method for pharmaceuticals. Coupling of Raman spectroscopy with separation techniques is also another advancement applied to reduce or avoid possible spectral interferences. Therefore, in this review, transmission Raman spectroscopy, SERS, and SERS coupled with various separation techniques for pharmaceutical analysis are presented.     

A study on the formation mechanism of graphite fluorides by Raman spectroscopy

Raman spectra were measured of highly fluorinated graphite samples prepared at room temperature, 380 and 515 °C. C_xF prepared at room temperature showed a novel downshifted band at 1555–1542 cm⁻¹ along with G band at 1593–1583 cm⁻¹. Similar behavior is also observed for samples prepared at 380 and 515 °C at early stages of fluorination, after which the Raman shifts completely disappeared. Raman spectra as well as X-ray diffraction (XRD) analysis suggest that graphite fluorides, (CF)_n and (C₂F)_n are formed via fluorine-intercalated phase with planar graphene layers.     

负载氧化钒催化剂的多波长拉曼光谱研究:结构识别和定量

探究负载金属氧化物的结构是确立催化剂结构和催化性能之间相互关系的首要条件. 在众多表征技术中,多波长拉曼光谱结合了共振拉曼和由不同波长激发的非共振拉曼,不仅在识别负载金属氧化物团簇的结构,而且在定量方面已经成为强有力的工具. 本文以两个负载氧化钒体系(VOx/SiO2,VOx/CeO2)为例,阐述了如何利用该技术研究活性氧化物团簇的多相结构,并理解氧化物团簇和载体之间复杂的相互作用. 由多波长拉曼光谱得到的定性和定量信息能为设计更有效的负载金属氧化物催化剂提供基本的依据.     

Effect of a bioactive curcumin derivative on DPPC membrane: A DSC and Raman spectroscopy study

Interactions of dimethoxycurcumin (1) a lipophilic bioactive curcumin derivative with dipalmitoyl phosphatidylcholine (DPPC) were investigated. The thermodynamic changes caused by (1) and its location into DPPC lipid bilayers were monitored by differential scanning calorimetry and Raman spectroscopy. The results reveal that (1) influences the thermotropic properties of DPPC lipid membrane causing abolition of the pretransition and broadening of the phase-transition profile and slightly decreases the T_m at increasing concentrations. The Raman height intensity ratios of the peaks I_2935/2880, I_2844/2880 and I_1090/1130 are representative of the interaction of (1) with the alkyl chains and furnish information about the ratio between disorder and order that exists in the conformation of the alkyl chain. The intensity changes of the peak at 715 cm⁻¹ indicates interaction between the choline head group and (1). The Raman spectroscopy results are in agreement with the thermal analysis results. Biologically active lipophilic molecules such as (1) should be studied in terms of their interaction with lipid bilayers prior to the development of advanced lipid carrier systems such as liposomes. The results of these studies provide information on the membrane integrity and physicochemical properties that are essential for the rational design lipidic drug delivery systems.     

Applications of Raman spectroscopy in pharmaceutical analysis

As Raman spectroscopy enables rapid, non-destructive measurements, the technique appears a most promising tool for on-line process monitoring and analysis in the pharmaceutical industry. This article gives a short introduction to Raman spectroscopy and presents several applications in the pharmaceutical field.     

异硫氰基孔雀石绿受激拉曼光谱研究

本文报道了具有时间分辨能力的全频宽带受激拉曼（BBSRS）系统和关于异硫氰基孔雀石绿（MGITC）受激拉曼光谱（sRs）的研究．BBSRS系统的探测光为450-800nm宽带连续白光,泵浦光为280～900nm范围内连续可调谐的ps窄带可见光（带宽≈7．5cm-1,脉宽≈2．5ps）．在合适的泵浦波长下,该系统可同时获取拉曼损失和拉曼增益光谱．MGITC的SRS研究结果表明,当拉曼损失谱峰出现在最大吸收波长（≈627nm）时,共振SRS谱峰强度最大;当泵浦或增益谱峰在最大吸收波长附近时,未观察到明显的共振拉曼信号;共振峰强度随浓度增大而增大,随泵浦功率增大而迅速增大,后趋于饱和;共振和非共振峰强在延时零点附近达到最大值,并随延时绝对值的增大而减小．     

Raman spectroscopy based analysis of milk using random forest classification

The development of a classification system based on the Raman spectra of milk samples is proposed in present study. Such development could be useful for nutritionists in suggesting healthy food to infants for their proper growth. Previously, molecular structures in milk samples have been exploited by Raman spectroscopy. In the current study, Raman spectral data of milk samples of different species is utilized for multi-class classification using a dimensionality reduction technique in combination with random forest (RF) classifier. Quantitative and experimental analysis is based on locally collected milk samples of different species including cow, buffalo, goat and human. This classification is based on the variations (different concentrations of the components present in milk such as proteins, milk fats, lactose etc.) in the intensities of Raman peaks of milk samples. Principal component analysis (PCA) is used as a dimensionality reduction technique in combination with RF to highlight the variations which can differentiate the Raman spectra of milk samples from different species. The proposed technique has demonstrated sufficient potential to be used for differentiation between milk samples of different species as the average accuracy of about 93.7%, precision of about 94%, specificity of about 97% and sensitivity of about 93% has been achieved.     

Study of oxidic and sulfided selective hydrodesulfurization catalysts for gasoline using Raman spectroscopy

A series of CoMo/Al2O3 catalysts for selective hydrodesulfurization （HDS） of gasoline were studied with Raman spectroscopy, a powerful method that creates specific signals for the states and the distributions of oxidic precursors and sulfided active phases. The higher the Mo and Co, the lower the tetrahedrally coordinated molybdate, and the higher the polymolybdate. But the amount of polymolybdate decreased when CoMoO4 appeared. Cobalt-promoted polymolybdate was the precursor, and its relative content correlated well with the HDS selectivity. For sulfided catalysts, adding the cobalt-promoter led to local distortion-disorder of the MoS2 structure and the formation of a CoMoS phase. This method can provide important information for designing new industrial selective-HDS catalvsts.     

Characterization of lipid extracts from brain tissue and tumors using Raman spectroscopy and mass spectrometry

Brain tissue is characterized by high lipid content. The amount of lipids decreases, and its composition changes in the most frequent primary brain tumor, the glioma. Scope of the current paper was to extract quantitatively lipids from porcine and human brain tissue as well as from five human gliomas using a modified protocol according to Folch. The lipid extracts were studied by Raman spectroscopy with 785 nm excitation and by mass spectrometry with electron impact ionization. Porcine and human brain tissues have similar water and lipid content and show similar Raman and mass spectra. In contrast, gliomas are characterized by increased water content and decreased lipid content. Elevated phosphatidylcholine to cholesterol ratios in lipid extracts of gliomas were indicated by Raman bands of the choline group and cholesterol. Due to its higher sensitivity, mass spectrometry detected increased levels of cholesterol ester relative to cholesterol in lipid extracts of gliomas. For comparison, thin tissue sections were prepared from the glioma specimens before lipid extraction; infrared spectroscopic images were recorded and analyzed by a supervised classification model. This study demonstrates how to improve the analysis of brain tumors and to complement the diagnosis of brain pathologies using a multimodal approach.