Intensity modulation of the Shirley background of the Cr 3p spectra with photon energies around the Cr 2p edge

The background in X‐ray photoelectron spectroscopy data originates, partially, from inelastically scattered photoelectrons. In fact, the current theoretical methods for calculating the background intensity are based on electron energy losses. However, a critical part of the experimental signal, which is known as the Shirley background, cannot be described within the current formalisms. This suggests that the Shirley electrons are not associated with energy losses of photoelectrons and must originate from a different photoexcitation phenomenon with a cross section of its own. We propose a mechanism based on core channeling as the physical origin of the Shirley signal.     

Quantitative analysis of angle‐resolved XPS spectra recorded in parallel data acquisition mode

The effects of anisotropy of the photoionization cross‐section and elastic scattering of photoelectrons in solids are investigated for angle‐resolved XPS spectra (ARXPS) recorded from α–Al₂O₃ substrate in parallel data acquisition mode. It is shown that for quantitative analysis of ARXPS spectra recorded in parallel data acquisition mode it is essential to account for the anisotropies of the photoionization cross‐sections of the detected photoelectrons for the concerned elements in the solid due to variation of the angle between the incident x‐rays and the detected photoelectrons. Neglecting the effect of elastic scattering only leads to minor errors in quantitative analysis of the ARXPS spectra. By adopting experimentally determined values for the relative sensitivity factors of the concerned photoelectrons in the solid as a function of the detection angle, cumbersome corrections for the effects of anisotropy of the photoionization cross‐section and elastic scattering can be avoided. Copyright © 2004 John Wiley & Sons, Ltd.     

Photoelectron angular distributions of Cu,Ag, Pt and Au samples: experiments and simulations

Angular distributions of photoelectrons emitted from semi‐infinite Cu, Ag, Pt and Au specimens have been measured for off‐normal emission angles in the range between 20 and 70° with a Thermo Theta Probe electron spectrometer. Experimental peak intensities for peaks of atomic subshells observable in the spectra were compared with results of simulations using the NIST Database for the Simulation of Electron Spectra for Surface Analysis (SESSA) that takes into account the effects of (i) anisotropy of the photoelectric cross‐section; (ii) elastic scattering of the photoelectrons; and (iii) the finite solid angle of the detector. In addition, a separate correction was made to the simulated intensities for the effects of surface excitations. The combined influence of these effects was found to significantly affect the angular distributions. Furthermore, it was found that ratios of the calculated peak intensities of the observed subshells for a particular material to the measured intensities deviate from unity by typically less than 1% after corrections for multiple inelastic scattering and surface excitations. Copyright © 2010 John Wiley & Sons, Ltd.     

Non-destructive depth profile analysis using synchrotron radiation excited XPS

We have used synchrotron radiation as excitation source in an X-ray photoelectron spectroscopy (XPS) experiment to analyse surface-near element depth profiles non-dectructively. By tuning the photon energy one can vary the kinetic energy of the photoelectrons and in turn the information depth of the measurement. To quantify the sample geometry (e.g. layer thicknesses) model calculations similar as for angle-resolved XPS (ARXPS) measurements are necessary. We have successfully applied this technique to several samples. We will show how to calculate the relative intensities of the peaks, using photoionization cross sections and an experimentally determined analyzer transmission function and the procedure to quantify the geometry for a model sample: natively oxidized Ta covered by carbon contamination. At Sn-doped indium oxide samples we found a sub-monolayer of segregated Sn at the surface which was expected from previous investigations.     

Monte‐Carlo simulation of x‐ray photoelectron emission from silver

Silver 3d x‐ray photoelectron spectroscopy (XPS) spectra were simulated with the Monte‐Carlo method using an effective energy‐loss function that was derived from a reflected electron energy‐loss spectroscopy (REELS) analysis based on an extended Landau approach. After confirming that Monte‐Carlo simulation based on the use of the effective energy‐loss function can successfully describe the experimental REELS spectrum and Ag 3d XPS spectrum, we applied Monte‐Carlo simulation to predict the angular distribution of Ag 3d x‐ray photoelectrons for different x‐ray incidence angles and different photoelectron take‐off angles. The experimental photoelectron emission microscope that we are constructing was confirmed as being close to the optimum configuration, in which the x‐ray incident angle as measured from the surface normal direction is 74° and the photoelectron take‐off angle is set normal to the surface. The depth distribution functions of the Ag 3d X‐ray photoelectrons for different energy windows suggest that the photoelectron emission microscope will exhibit greater surface sensitivity for narrower photoelectron energy windows. Copyright © 2003 John Wiley & Sons, Ltd.     

三维编织C/SiC纤维复合块材的XPS研究

用常规XPS、小面积XPS和成象XPS研究了三维编织的C/SiC纤维复合材料.结果表明,在燃气中灼烧后材料表面生成的暗红色反应是由于层中的SiC已氧化成氧化硅,同时反应层中还引入了杂质Fe、Na、Ca和Al;在反应层下Si以元素Si、SiC和氧化硅多种形式存在.块材横截面的多点小面积XPS分析结果表明,元素硅的相对浓度随深度增加而减少, SiC的相对浓度则随深度增加而增加.块材横截面的成象XPS分析清楚地显示了SiC 在纤维束边界间呈大致均匀的分布,在块材两边元素Si的浓度明显偏高.根据XPS象的线性扫描结果估计了纤维束、束间SiC层和块材边缘元素Si富集层的厚度.     

Density functional studies of functionalized graphitic materials with late transition metals for Oxygen Reduction Reactions

Low-temperature fuel cells are appealing alternatives to the conventional internal combustion engines for transportation applications. However, in order for them to be commercially viable, effective, stable and low-cost electrocatalysts are needed for the Oxygen Reduction Reaction (ORR) at the cathode. In this contribution, on the basis of Density Functional Theory (DFT) calculations, we show that graphitic materials with active sites composed of 4 nitrogen atoms and transition metal atoms belonging to groups 7 to 9 in the periodic table are active towards ORR, and also towards Oxygen Evolution Reaction (OER). Spin analyses suggest that the oxidation state of those elements in the active sites should in general be +2. Moreover, our results verify that the adsorption behavior of transition metals is not intrinsic, since it can be severely altered by changes in the local geometry of the active site, the chemical nature of the nearest neighbors, and the oxidation states. Nonetheless, we find that these catalysts trend-wise behave as oxides and that their catalytic activity is limited by exactly the same universal scaling relations.     

Quantitative analysis by X-ray photoelectron spectroscopy without reference samples

A comparison between X-ray fluorescence analysis (XRFA) and X-ray photoelectron spectroscopy (XPS) indicates the applicability of these two methods as relative and absolute techniques. For XPS the absolute field of application should be preferred. An improvement of the Hirokawa-Ebel method (an absolute XPS analysis) is presented in this paper. It is shown that the knowledge of the inelastic mean free paths of the photoelectrons (IMFP) is no longer required, but the energy dependence of the IMFPs can be used as a basis. This guarantees simplicity and much more universal applicability.     

XPS primary excitation spectra of Zn 2p,Fe 2p,and Ce 3d from ZnO, α-Fe2O3, and CeO2

Metal oxides are important for current development in nanotechnology. X-ray photoelectron spectroscopy(XPS) is a widely used technique to study the oxidation states of metals, and a basic understanding of the photoexcitation process is important to obtain the full information from XPS. We have studied core level excitations of Zn 2p, Fe 2p, and Ce 3d photoelectron emissions from ZnO, α-Fe₂O₃, and CeO₂. Using an effective energy-differential XPS inelastic-scattering cross section evaluated within the semiclassical dielectric response model for XPS, we analysed the experimental spectra to determine the corresponding primary excitation spectra, ie, the initial excitation processes. We find that simple emission (Zn 2p) as well as complex multiplet photoemission spectra (Fe 2p and Ce 3d) can be quantitatively analysed with our procedure. Moreover, for α-Fe₂O₃, it is possible to use the software package CTM4XAS (Charge Transfer Multiplet program for X-ray Absorption Spectroscopy) to calculate its primary excitation spectrum within a quantum mechanical model, and it was found to be in good agreement with the spectrum determined by analysis of the experiment.     

XPS study of carboxylic acid layers on oxidized metals with reference to particulate materials

Low‐molecular‐weight organic additives such as stearic acid are commonly used as surface additives in powder injection moulding (PIM). It is therefore important to know how the additives interact with the surface of the powder used. In this study, such interactions are studied by means of controlled adsorption of carboxylic acids on the oxides of interest. The oxides are prepared by oxidation of flat samples of Fe, Cr, Mn and Si. Surface chemical characterization is done by means of XPS, the main approach on flat samples being a comparison of angle‐resolved analysis and the use of the Tougaard nanostructure analysis technique. Taking advantage of this comparison, the Tougaard method is then applied in the evaluation of XPS analyses of stainless‐steel powder with adsorbed stearic acid. In addition, time‐of‐flight SIMS analysis is used to verify the adsorption of stearic acid on the powder surface. It is shown that Tougaard nanostructure analysis can be used for determining the thickness of an organic layer on particulate material. The layer thickness of adsorbed stearic acid was estimated to be ～20 Å, corresponding to monolayer adsorption. Time‐of‐flight SIMS analysis verified the adsorption of stearic acid on the powder surface. From the XPS analysis of flat samples it was determined that the use of the metal/oxide universal cross‐section in Tougaard nanostructure analysis best described the increased background due to adsorption of carboxylic acids, and that information about molecular orientation could be gained. Copyright © 2003 John Wiley & Sons, Ltd.     

Understanding the reactivity of the tetrahedrally coordinated high-valence d0 transition metal oxides toward the C-H bond activation of alkanes: a cluster model study

We have carried out a theoretical study on the structure-function relationship for the selective oxidation of lower alkanes (C1-C4). The H abstraction mechanism has been examined over the model catalysts of high-valence d0 transition metal oxides in the tetrahedral coordination. The intrinsic connections among the H abstraction barrier, the strengths of the O-H and the M-O bonds, the ability of electron transfer, as well as the energy gap of frontier orbitals of the oxides have been rationalized in terms of thermodynamics cycles and the frontier orbital analysis. In particular, we emphasize the role that the O-H bond strength plays in determining the reactivity of a metal oxide.     

Electronic properties of oxides: Chemical and theoretical approaches

An original analysis of the electronic and chemical properties of oxides is proposed based on the electronegativity χ and the chemical hardness η. This model which has been applied to various oxide based metals, degenerate semiconductors and optical properties of transition metal oxides allows explaining their electronic behaviors: Strong electronegativity and weak chemical hardness characterize oxides of transition elements with high oxidation state. Strong electronegativity and strong chemical hardness feature insulators with a large optical gap. Weak electronegativity and moderate chemical hardness describe alkali and alkaline earth oxides and weak electronegativity and strong chemical hardness are for ionic oxides with a relatively large optical gap. For a few illustrative case studies, ab intio electronic band structure calculations within the density functional theory framework are used.     

Uranium Oxide Nanocrystals by Microwave‐Assisted Thermal Decomposition: Electronic and Structural Properties

Uranium oxides have attracted much attention not only in the context of nuclear energy generation but also for their application as pristine catalysts or as supports for other (transition metal) oxides and (precious) metals. Their propensity to adopt high coordination numbers and manifest multiple oxidation states (from +II to +VI) makes them attractive candidates for catalyzed transformation reactions. Herein, we report a new synthesis route to phase‐pure, crystalline UO₂ nanoparticles via microwave‐assisted decomposition of a molecular uranium(IV) precursor. The electronic structure and optical absorption properties of these nanocrystals were investigated using spectroscopic methods to evaluate their suitability for photo(electro)catalytic applications.     

Improving the Catalytic Performance of the Hydrogen Evolution Reaction of α-MoB2 via Rational Doping by Transition Metal Elements

Abundant transition metal borides are emerging as promising electrochemical hydrogen evolution reaction (HER) catalysts which have a potential to substitute noble metals. Those containing graphene-like (flat) boron layers, such as α-MoB2, are particularly promising and their performance can be further enhanced via doping by the second metal. In order to understand intrinsic effect of doping and rationalize selection of dopants, we employ density functional theory (DFT) calculations to study substitutional doping of α-MoB₂ by transition metals as a route towards systematic improvement of intrinsic catalytic activity towards HER. We calculated thermodynamic stability of various transition metal elements to select metals which form a stable ternary phase with α-MoB₂. We inspected surface stability of dopants and assessed catalytic activity of doped surface through hydrogen binding free energy at various hydrogen coverages. We calculated the reaction barriers and pathways for the Tafel step of HER for the most promising dopants. The results highlight iron as the best dopant, simultaneously lowering the reaction barrier of the Tafel step while having suitable thermodynamic stability within MoB₂ lattice.     

Excitation energy dependence for the Li 1s X-ray photoelectron spectra of LiMn2O4.

The Li 1s XPS (X-ray Photoelectron Spectroscopy) spectra of LiMn2O4, which is one of the major positive-electrode materials in lithium-ion rechargeable batteries, and MnO2 as a reference material, were measured by a laboratory-type XPS spectrometer. The Li 1s peak was not observed in the spectra excited by the Mg Kalpha line (1253.6 eV), because the Li 1s peak overlapped the background of the Mn 3p peak of LiMn2O4. The photoionization cross section of Mn 3p was larger than that of Li 1s for Mg Kalpha excitation. Therefore, the XPS measurement of LiMn2O4 by soft X-ray synchrotron excitation was carried out at beamline BL-7B on NewSUBARU synchrotron facility. Excitation energies of 110, 120, 130, 140, 150 and 151.4 eV were selected. The Li 1s peak was clearly observed in these XPS spectra. In order to investigate the excitation energy dependence, the area ratio of the Li 1s and Mn 3p peaks in the XPS spectra was plotted against the excitation energy. As a result, when the excitation energy was 110 eV, the area ratio had the maximum value.     

用于超级电容器的锰钴氧化物/碳纤维材料

The development of high-performance supercapacitor electrode materials is imperative to alleviate the ongoing energy crisis. Numerous transition metals (oxides) have been studied as electrode materials for supercapacitors owing to their low cost, environmental-friendliness, and excellent electrochemical performance. Among the developed binary transition metal oxides, manganese cobalt oxides typically show high theoretical capacitance and stable electrochemical performance, and are widely used in the electrode materials of supercapacitors. However, the poor conductivity and active material utilization of manganese cobalt oxide-based electrode materials limit their potential capacitance application. Cotton is mainly composed of organic carbon-containing materials, which can be transformed to carbon fibers after calcination. The resultant carbonaceous material exhibits a large specific surface area and good conductivity. Such advantages could potentially suppress the negative effects caused by the poor conductivity and small specific surface area of manganese cobalt oxides, thereby improving the electrochemical performance. Herein, we firstly deposited manganese cobalt oxides on cotton by a simple hydrothermal method, yielding a composite of manganese cobalt oxides and carbon fibers via subsequent calcination, to improve the electrochemical performance of the electrode material. X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET), thermogravimetric analysis (TGA), and electrochemical characterizations were used to investigate the physical, chemical, and electrochemical properties of the prepared samples. The fabricated manganese cobalt oxides in the composite were uniformly dispersed on the carbon fiber surface, which increased the contact between the interface of the electrode material and electrolyte, and enhanced electrode material utilization. The electrode material was confirmed to have well contacted with the electrolyte during a contact angle test. Hence, a pseudo-capacitance reaction completely occurred on the manganese cobalt oxide material. Moreover, the addition of carbon fibers reduced the resistance of the material, resulting in excellent capacitive performance. The capacitance of the prepared composite was 854 F∙g^-1 at a current density of 2 A∙g^-1. The capacitance was maintained at 72.3% after 2000 cycles at a current density of 2 A∙g^-1. These results indicate that the manganese cobalt oxide and carbon fiber composite is a promising electrode material for high-performance supercapacitors. The findings presented herein provide a strategy for coupling with carbon materials to enhance the performance of supercapacitor electrode materials based on manganese cobalt oxides. Thus, novel insights into the design of high-performance supercapacitors for energy management are provided.     

Clusters of Valence Electron Poor Metals—Structure,Bonding, and Properties

Metals in low oxidation states are capable of forming metal–metal bonds. An attempt has been made to classify the numerous phases and structures occurring in such metal-rich systems of valence electron poor metals in some sort of order from a rather general point of view. With this purpose in mind, clusters of these elements, their different types of interconnections, and their condensation via shared metal atoms, which finally leads to extended M? M bonded structures, are described. Interstitial atoms play an important role in stabilizing electron deficient clusters, and can actually lead to the loss of all M? M bonds. Surprising similarities emerge between apparently very different systems as the metal-rich oxides of alkali metals, the oxides, halides, and chalcogenides of d transition metals, and the halides and carbide halides of the lanthanoids.     

Regulating Spin States in Oxygen Electrocatalysis

Developing efficient and stable transition metal oxides catalysts for energy conversion processes such as oxygen evolution reaction and oxygen reduction reaction is one of the key measures to solve the problem of energy shortage. The spin state of transition metal oxides is strongly correlated with their catalytic activities. In an octahedral structure of transition metal oxides, the spin state of active centers could be regulated by adjusting the splitting energy and the electron pairing energy. Regulating spin state of active centers could directly modulate the d orbitals occupancy, which influence the strength of metal-ligand bonds and the adsorption behavior of the intermediates. In this review, we clarified the significance of regulating spin state of the active centers. Subsequently, we discussed several characterization technologies for spin state and some recent strategies to regulate the spin state of the active centers. Finally, we put forward some views on the future research direction of this vital field.