Characterization of cinematographic films by Laser Induced Breakdown Spectroscopy

The emulsion-coated transparent plastic-base film has been the main carrier for production and preservation of motion picture contents since the 19th century. The knowledge of the composition of black and white silver gelatine cinematographic films is of great importance for the characterization of the photographic process and for identifying the optimum conditions for conservation. A cinematographic film is a multi-component system that consists of a layer of photographic emulsion overcoating a polymeric support (plasticized cellulose triacetate) and a protective transparent cross-linked gelatine layer coating the emulsion. In the present work, Laser Induced Breakdown Spectroscopy (LIBS) is used to characterize the composition of the materials of cinematographic films. LIB spectra of film samples and of different individual film components, polymeric support and reference gelatines, were acquired in vacuum by excitation at 266 nm (Q-switched Nd:YAG laser, 6 ns, 10 Hz). In the cinematographic film, silver lines from the light-sensitive silver halide salts of the photographic emulsion are accompanied by iron, lead, chrome and phosphorus lines. Iron and lead are constituents of film developers, chrome is included in the composition of the hardening agents and phosphorus has its origin in the plasticizer used in the polymeric support. By applying successive pulses on the same spot of the film sample, it was possible to observe through stratigraphic analysis the different layers composition. Additionally, the results obtained reveal the analytical capacity of LIBS for the study and classification of the different gelatine types and qualities used for the protecting layer and the photographic emulsion.     

Laser Induced Breakdown Spectroscopy methodology for the analysis of copper-based-alloys used in ancient artworks

In this paper Laser Induced Breakdown Spectroscopy has been applied for determining the elemental composition of a set of ancient bronze artworks coming from archaeological site of Minervino Murge — Southern of Italy (dated around VII b.C.). Before carrying on the analysis of the archaeological samples, the characterization of the analytical technique has been accomplished by investigating the trueness of the typical assumptions adopted in LIBS, such as Local Thermodynamic Equilibrium, congruent ablation and plasma homogeneity. With this purpose, two different laser pulse durations, 7 ns and 350 fs, have been used. We have focused our attention on LIBS analysis of bronze standards by considering and discussing the bases of both methodology and analytical approach to be followed for the analysis of ancient copper-based-alloy samples. Unexpectedly, regardless from the laser pulse duration, the LIBS technique has shown, by considering an adequate approach on the emitting plasma features, that its peculiarities are anyway preserved so that a fast analysis of ancient copper-based-alloys can be achieved. After verifying the suitability of the methodology, it has been possible to fulfill the typical assumptions considered for the LIBS calibration curves method and use it for ancient bronze artworks analysis.     

The Use of Laser Induced Breakdown Spectroscopy (LIBS) to Study Catalyst Deactivation of V2O5/γ‐Al2O3 as Compared to Inductively Coupled Plasma Optical Emission Spectrometry

Laser Induced Breakdown Spectroscopy (LIBS) method is introduced as a novel approach in this work to study catalyst deactivation of V₂O₅/γ‐‐Al₂O₃ for gas‐phase dehydration of glycerol and producing acrolein. The LIBS results of V₂O₅/γ‐Al₂O₃ samples are compared with those data that are obtained by Inductively Coupled Plasma Optical Emission Spectrometry (ICP‐OES). Experimental data of LIBS data specify that line intensities of vanadium are decreased by deactivation of V₂O₅/γ‐Al₂O₃ catalyst. A comparison between the results of LIBS test as well as ICP‐OES analysis shows that the amount of vanadium is decreased in the catalyst. Moreover, coke formation changes the surface of the catalyst. The results of deactivation of V₂O₅/γ‐Al₂O₃ are also compared with Pd/C catalyst deactivation.     

An efficient Approach to Modify the Catalyst Activity for the Hydrogenation of Nitrobenzene

Transition metal complexes have been used extensively for the hydrogenation in homogeneous system probably due to their high catalytic selectivities under mild operating conditions. In order to improve the homogeneous catalyst system, some studies on the homogeneous or soluble polymer-supported bimetallic catalysts have been recently carried out and enhanced activity, better selectivity were observed in selective hydrogenation, hydrodehalogenation, carbonylation, hydroformylation and regioselec…