Synthesis and Properties of Polyacrylamide-Based Conducting Gels with Enhanced Mechanical Strength

A nanocomposite conducting hydrogel, polyacrylamide/MWNT/clay (abbreviated as PAM/MWNT/clay), prepared through in situ free radical aqueous polymerization and crosslinked by both clay, as a functional physical crosslinker, and N,N′-methylenebisacrylamide (MBA) as a chemical crosslinker, is reported. The morphology of the gels was characterized by scanning electron microscopy (SEM). The mechanical properties and electrical conductivity were also studied. The results show that the prepared hydrogels had the expected chemical components, with a highly porous structure, and the gels also showed high mechanical strength. The mechanical strength and electrical conductivity value increased with increasing content of multi-walled nanotube (MWNT), and decreased with increasing content of water.     

Mechanical and Thermal Properties of Polypropylene/Silica Aerogel Composites

Polypropylene (PP) composites including various amounts of silica aerogel (SA) microparticles were prepared by melt mixing in an internal mixer. The morphology and microstructure of the prepared composites were investigated by scanning electron microscopy (SEM). Mechanical properties of the samples, including elastic modulus, tensile stress, elongation and stress at break, were measured by tensile tests. In addition, the other mechanical features, including Izod impact strength, hardness and wear resistance, were evaluated and then related to the structure of the PP/SA composites. Furthermore, the thermal characteristics of the composites, such as heat deflection temperature and thermal stability, were studied by thermal gravimetric analysis (TGA). The SEM photographs indicated the satisfactory SA particles dispersion for the compositions of 1% and 3% but agglomeration of the aerogels at higher SA contents. Since the composites became stiffer, the impact and tensile strength decreased. The addition of the SA to the PP matrix yielded harder samples with lower weight loss and coefficients of friction in wear tests. The TGA evaluations confirmed that the presence of SA promoted and upgraded the thermal stability and heat deflection temperature of PP. The thermal results proved the superior potential of PP as an insulator when the SA particles were added.     

Effect of Enhanced Gravity on the Microstructure and Mechanical Properties of Al0.9CoCrFeNi High-Entropy Alloy

The influence of enhanced gravity on the microstructure and mechanical properties of the Al_0.9CoCrFeNi high-entropy alloy, which was solidified under normal gravity (acceleration 1 g) and enhanced gravity (acceleration 140 g, acceleration 210 g, and acceleration 360 g) conditions is reported in this paper. Its solidification under enhanced gravity fields resulted in refinement of the columnar nondendritic grain structure and an increase in the area fraction of the body-centered cubic (BCC) structure phases. The mass transfer strengthened by enhanced gravity promoted element diffusion and enrichment, which caused changes in the composition and microstructure that, in turn, affected the mechanical properties of the alloy. The compressive strength and plasticity of the sample solidified at acceleration 360 g were equal to 2845 MPa and 36.4%, respectively, which are the highest values reported to date for Al_0.9CoCrFeNi alloy.     

Preparation and Properties of Polylactic Acid (PLA)/Silica Nanocomposites

Surface-modified silica was incorporated into bio-based polylactic acid (PLA) to improve its performance. The modification by aminosilane on the silica was confirmed through FTIR (Fourier transform infrared) spectra. Following the aminosilane modification, polyethylene glycol methyl ether (PEGME) was grafted, via the aminosilane, on the silica to form the desired surface-modified silica (PEGME-silica). The grafting percentage of polyethylene glycol methyl ether was about 6.9 wt%. Unmodified silica, having underwent a similar treatment to maintain the same thermal history but without adding silane and PEGME, was also prepared. The PEGME-silica system had slightly higher tensile strength than the unmodified silica system, with a rheological study showing an enhanced polymer matrix-dispersed silica interaction and better dispersion in morphology observations being proposed as the cause. The dynamic storage modulus in the terminal zone was reduced for large amounts of highly dispersed surface-modified silica in comparison with unmodified silica. Tan δ decreased significantly with increasing unmodified silica contents in the low frequency region, resulting in solid-like behaviors. On the other hand, there was only a limited decrement for modified silica-filled samples in the corresponding ranges, especially for low dosages of the modified silica. The shear thinning phenomenon appeared to be more pronounced for unmodified silica at high silica content, but not for modified silica. To the best of our knowledge, this is the first report of the effect of polyethylene glycol methyl ether (PEGME)-modified nanosilica on the properties of PLA/silica nanocomposites prepared under a melt mixing process to illustrate the significance of surface modification via Cole–Cole plots.     

Effect of Silica and Silicone Oil on the Mechanical and Thermal Properties of Silicone Rubber

The effect of three types of silicas with varied loading and the loading of hydroxyl terminated silicone oil on the mechanical and thermal properties of silicone rubbers (SRs) were investigated. Mechanical properties were affected by the silica loading because of the interaction between fillers and polymer and the filler dispersion. Fumed silica filled SRs showed higher tanδ, tensile strength, and elongation at break compared to those containing two types of precipitated silicas. With increasing silicone oil loading, the tensile strength, tear strength, hardness, and tanδ of SRs first increased and then decreased.     

Comparing the Effect of Micro- and Nano-Scale Silica on the Rheological,Dynamic Mechanical Properties and Flame Resistance of Nylon 6,6

Nylon 6,6 micro- and nano-silica composites were prepared by melt processing using a twin-screw extruder. Three nanocomposites containing 4, 8, and 12 wt.% of nanosilica were prepared. In order to compare the effect of size, a microcomposite containing 4 wt.% of micron-size silica was also prepared. The effects of particle type (micro- and nano-size) on the dynamic thermomechanical and rheological properties, morphology, and flame resistance of the composites were examined. The dynamic thermomechanical properties (DMTA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), dynamic rheometry, thermogravimetry analysis (TGA), and limiting oxygen index (LOI) data are reported. The particles were observed to be dispersed uniformly, but with a different level of coalescence, by means of SEM and TEM. The DMTA results showed that the damping factor peak positions of the nanocomposites at low content of nanofiller shifted more to higher temperature compared to those of nanocomposites containing high concentrations of nanofiller. Dynamic rheometry, using a parallel plate rheometer, showed that the rheological moduli of the nanocomposites increased with increase in nanofiller concentration; however, this increase was greater in the high-frequency region. These results showed that increasing the concentration of nanofiller, and the consequent coalescence effect within the nanocomposites, led to rheological moduli values similar to those of the microcomposite. The TGA and LOI results of the microcomposite and nanocomposite containing 4wt.% of nanosilica showed that nanosilica had a more significant effect to enhance the heat and flame resistance of nylon 6,6 compared to that of micron-sized silica.     

Mechanical Properties and Flow Behavior of Polymers for Enhanced Oil Recovery

The mechanical properties and flow behavior in porous media of three different polymer systems including a hydrophobically modified acrylamide-based copolymer (HMSPAM), a partially hydrolyzed polyacrylamide (HPAM), and a polysaccharide (xanthan gum) were evaluated to establish their functional differentiation as mobility control agents in enhanced oil recovery (EOR). The rheological properties of the polymers were described by the power-law model to investigate their non-Newtonian behavior. The first normal stress difference (N₁) and Weissenberg number (W_e) were also used to compare their elastic properties. The experimental results showed that, at comparable shear viscosity, HMSPAM exhibited significant elasticity compared to HPAM and xanthan gum. Shear resistance tests indicated that all of the polymers experienced an extra stress when converging into a capillary tube due to the “entrance effect.” Xanthan gum was the most mechanically stable polymer. Moreover, HMSPAM showed the superior reformability which was quantified by the regained viscosity with relaxation time. This could be explained by the rapid re-association of the hydrophobic interactions. Sandpack flood tests indicated that HMSPAM rendered extremely high mobility control ability during polymer flooding suggesting its potential in EOR. However, this polymer also experienced significant retention within the porous media (potential injectivity and plugging problems), which may be attributed to the formation of bulky associative polymer networks. In this work, UV spectrometry was employed to monitor the concentration of the produced polymer solutions and quantify the polymer retention within porous media. This analytical approach offers great reliability and simplicity. It was concluded that the use of a particular polymer system depends on the oil reservoir conditions and the target EOR application.     

Mechanical Properties of Ni-Coated Single Graphene Sheet and Their Embedded Aluminum Matrix Composites

The effects of Ni coating on the mechanical behaviors of single graphene sheet and their embedded Al matrix composites under axial tension are investigated using molecular dynamics （MD） simulation method. The results show that the Young＇s moduli and tensile strength of graphene obviously decrease after Ni coating. The results also show that the mechanical properties of Al matrix can be obviously increased by embedding a single graphene sheet. From the simulation, we also find that the Young＇s modulus and tensile strength of the Ni-coated graphene/Al composite is obviously larger than those of the uncoated graphene/Al composite. The increased magnitude of the Young＇s modulus and tensile strength of graphene/Al composite are 52.27% and 32.32% at 0.01 K, respectively, due to Ni coating. By exploring the effects of temperature on the mechanical properties of single graphene sheet and their embedded Al matrix composites, it is found that the higher temperature leads to the lower critical strain and tensile strength.     

Mechanical and Thermal Performance of High-Density Polyethylene/Alumina Nanocomposites

High-density polyethylene (HDPE) nanocomposites reinforced with pristine and vinyltrimethoxysilane (VTMS)-treated alumina nanoparticles of 2, 4, and 6 wt% were melt-compounded in a twin-screw extruder followed by injection molding. Their structure, thermal and mechanical behaviors were studied. Fourier transform infrared (FTIR) spectra showed that VTMS was successfully covalently grafted to the alumina nanoparticles. The X-ray diffraction (XRD) patterns indicated that the alumina nanoparticle additions broadened the characteristic peak width of HDPE, indicating that they reduced the crystallite size of HDPE. The heat deflection temperature and thermogravimetric analyses demonstrated that the dimensional and thermal stability of HDPE were enhanced markedly by adding pristine and silane-treated alumina nanoparticles. The alumina nanoparticle additions were also beneficial in enhancing Young's modulus and yield strength of HDPE. The reinforcing effect was particularly apparent in the silane-treated nanocomposites due to improved filler–matrix interactions.     

Mechanical Properties of Ni-Coated Single Graphene Sheet and Their Embedded Aluminum Matrix Composites

The effects of Ni coating on the mechanical behaviors of single graphene sheet and their embedded Al matrix composites under axial tensionare investigated using molecular dynamics (MD) simulation method. Theresults show that the Young's moduli and tensile strength of grapheneobviously decrease after Ni coating. The results also show that the mechanical properties of Al matrix can be obviously increased by embedding asingle graphene sheet. From the simulation, we also find that the Young'smodulus and tensile strength of the Ni-coated graphene/Al composite isobviously larger than those of the uncoated graphene/Al composite. Theincreased magnitude of the Young's modulus and tensile strength ofgraphene/Al composite are 52.27 and 32.32 at 0.01 K, respectively,due to Ni coating. By exploring the effects of temperature on the mechanicalproperties of single graphene sheet and their embedded Al matrix composites, it is found that the higher temperature leads to the lower critical strain and tensile strength.     

Dynamic Mechanical and Dielectric Properties of Ethylene Vinyl Acetate/Carbon Nanotube Composites

A comparative study of the dielectric and mechanical properties of ethylene vinyl acetate copolymer (EVA) filled with various concentrations of pristine and modified carbon nanotubes is reported. The surface of the carbon nanotubes was modified with 4-(2-(cholesteryloxycarboxy)ethyl) phenyl to improve the interaction of the filler with the block copolymer matrix. The improved interaction and the better dispersion of the modified carbon nanotubes (mMWCNTs) were demonstrated by a detailed study of the EVA molecular mobility through dynamic mechanical analysis and broadband dielectric relaxation spectroscopy. The storage modulus of the nanocomposite with 6 wt.% of mMWCNTs at ?50°C was enhanced by 103%, whereas for the nanocomposite with the same amount of unmodified filler, the storage modulus was only enhanced by 76% compared to the pure elastomeric matrix. This difference is more pronounced in the rubbery region in which the storage moduli were increased by 117% and 48% for the composite with the modified and unmodified fillers, respectively. The morphologies of the nanocomposites were studied with scanning and transmission electron microscopies to demonstrate the dispersion of the mMWCNTs within the EVA matrix.     

Morphology and Mechanical Properties of Polyamide 6/Acrylonitrile-Butadiene-Styrene Blends Containing Carbon Nanotubes

The blends of polyamide 6/acrylonitrile-butadiene-styrene (PA6/ABS), with added styrene-maleic acid copolymer (SMA) compatibilizer, were prepared through melt mixing in an internal mixer. The effects of blend composition and various process conditions, as well as the addition of multi-wall carbon nanotubes (MWCNTs) to the blends, on the morphology and mechanical properties were investigated. The morphology of the blends and blend nanocomposites were observed by scanning electron microscopy (SEM) and analyzed using an image analysis technique. The mechanical behavior of the blends was investigated by tensile and also impact testing. The results showed that the blend composition as well as the processing conditions significantly affected the morphology and mechanical properties of the PA6/ABS blends. Among the various compositions, the blend with 36?wt.% of ABS and 4?wt.% of SMA compatibilizer exhibited the best mechanical properties. Comparing various speeds and times of mixing, it was found that less mixing speed and longer mixing times resulted in the favorable morphology and conditions for achievement of the desired toughness for the polyamide 6. By adding different amounts of MWCNTs to the blends, it was found that the presence of the carbon nanotubes changed the viscosity of the resulting nanocomposite and thus changed the morphology. These nanocomposites also showed an improvement in mechanical properties. The MWCNTs acted as a second compatibilizer, resulting in a synergistic effect on the mechanical properties of the PA6/ABS blend nanocomposites.     

Preparation and Properties of Polypropylene/Organo-Vermiculite Nanocomposites

Polypropylene/organo-vermiculite (OVMT) nanocomposites with different clay loadings were prepared via melt-mixing using a twin-screw extruder. The vermiculite was premodified with maleic anhydride by ball milling. The resultant polypropylene/OVMT nanocomposites possess an intercalated structure as confirmed by both wide-angle X-ray diffraction (WAXD) and transmission electron microscopy (TEM). The mechanical property tests show that the tensile and flexural strength of these nanocomposites increase dramatically with the OVMT loading; the fracture toughness remains almost unchanged and the Charpy impact strength decreases slightly. Finally, differential scanning calorimetry (DSC) and WAXD results show that the addition of vermiculite can induce the β crystal structure of polypropylene.     

Interactions Between an Ionic Liquid and Silica,Silica and Silica,and Rubber and Silica and Their Effects on the Properties of Styrene-Butadiene Rubber Composites

An investigation of the effect of an ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate (BMI), on the properties of silica reinforced styrene-butadiene rubber (SBR), aimed to correlate the interactions between the ionic liquid and silica, silica and silica, and silica and rubber with the macro-properties and microstructure of SBR and SBR/silica vulcanizates is described. The interaction between the ionic liquid and silica was characterized by differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR), the interaction between silica and silica was characterized by a rubber processing analyzer (RPA), and the interaction between rubber and silica was characterized by the bound rubber content. The FTIR analysis revealed that BMI can react with the hydroxyl groups on the surface of silica, improving the compatibility between the rubber and silica. The RPA and bound rubber testing indicated that the interactions between silica and silica particles were weakened and the interaction between silica and rubber increased with the incorporation of BMI into the SBR rubber. The bound rubber content showed a maximum with a BMI content of 3 phr. At the same time, the dispersion of silica in SBR was improved with the incorporation of BMI. With the increase of BMI content, the curing rate was greatly improved and the crosslink density increased. BMI also increased the tensile strength and abrasion resistance of the SBR vulcanizates. Most important, the BMI significantly improved the dynamic properties of the rubber composites, especially the wet-skid resistance and rolling resistance. However, excessive BMI (beyond 3 phr) acted as a plasticizer and was detrimental to the mechanical properties, resulting in a decrease of tensile strength and abrasion resistance.     

Mechanical and AFM investigations of elastomers filled with multiwall carbon nanotubes

Strong reinforcing effects are observed when multiwall carbon nanotubes are incorporated in a styrene–butadiene copolymer. The good level of dispersion of carbon nanotubes in the host matrix that allows to take advantage of their high aspect ratio as well as their orienting capability under uniaxial extension, appear to be the main parameters for mechanical reinforcement. Atomic force microscopy carried out in the unstretched and stretched states has been shown to bring important insights for the understanding of the mechanical properties of the composites.     

Mechanical Properties and Morphology of LDPE/PP Blends

Two types of polypropylene (PP) with different molecular structure, namely, homogeneous PP (PPH) and PP block‐copolymer (PPC), were blended with a long chain, branched, low density polyethylene (LDPE) in a twin screw extruder and then injection moulded into test specimens; the mechanical properties and morphology of the blends are reported. The tensile strength, elastic modulus, flexural strength, and flexural modulus of the blends increased monotonically with increasing PP content, although exhibiting a slightly negative deviation from the rules of mixtures due to the relatively poor compatibility of the components, which caused the blends to separate into individual phases. Comparatively, these mechanical properties of the LDPE/PPH blend were much higher than that of the LDPE/PPC blend, which was attributable mainly to the fact that the mechanical properties of neat PPH are stronger than that of neat PPC. With respect to the impact strength of the blends, a maximum value appeared in LDPE/PPH blends when PPH content was about 20% and also in LDPE/PPC blends when PPC content was about 40%.     

Effect of Spherical Nanoparticles on the Motion of Macromolecular Chains and Segments of Isotactic Polypropylene. I. Dynamic Mechanical and Thermal Properties

The role of spherical nano-CaCO₃ particles treated with 2 wt% and 6 wt% stearic acid (SA), respectively, on the motion of macromolecular chains and segments of isotactic polypropylene (iPP) was studied through the dynamic mechanical analysis and nonisothermal crystallization. Higher nucleation activity of the particles and more nucleating sites were achieved in the 6 wt% SA treated particle nanocomposites with respect to the 2 wt% SA counterpart. The increased nucleation efficiency caused high inhomogeneity and thus large mobility of the amorphous phase of iPP, which favored a low glass transition temperature (T_g ) in the nanocomposites. However, the spherical nanoparicles also spatially restrained the motion of macromolecular chains and segments, and the better the nanoparticles dispersed, the stronger the restriction was. Thus the glass transition temperature (T_g ) of the nanocomposites decreased with increasing filler loading but recovered at a certain particle concentration. At this filler content, the maximal α-transition temperature (T_α ) and the main melting peak temperature (T_m1 ) as well as the lowest degree of crystallinity (X_PP ) also occurred. This critical filler loading appeared at lower value (20 wt%) in 6 wt% SA treated nano-CaCO₃ composites with respect to 2 wt% SA counterpart (25%) due to the better dispersion of particles in the former. It was concluded that the mobility of the macromolecular chains and segments of iPP was dominated by the competition of the spatial confinement and nucleation effect of nano-CaCO₃ particles in the matrix.     

Preparation and Properties of Organically Modified Montmorillonite/Nitrile Rubber Nanocomposites

A series of organically modified montmorillonite (OMMT)/nitrile rubber (NBR) nanocomposites were prepared by a simple mechanical-mixing method. The structures of OMMT and the dispersion of OMMT in the rubber matrix were detected by X-ray diffraction (XRD). The mechanical properties of the NBR/OMMT nanocomposites were characterized, and the tribological behaviors of the nanocomposites were evaluated on a ring-block (MRH-3) wear tester. The results showed that the OMMT was homogeneously dispersed in the NBR matrix. The tensile strength of the OMMT/NBR nanocomposites increased with increasing OMMT contents. Both the coefficient of friction (COF) and wear of the nanocomposites decreased remarkably with increasing OMMT content. In addition, the influence of the applied load on the tribological properties of the nanocomposites is discussed. It is expected that the research may be of aid in the rational design and use of solid, self-lubricating nanocomposites under different loading states.     

Investigation of the Morphological and Mechanical Properties of Polyethylene Terephthalate (PET)/Ethylene Propylene Diene Rubber (EPDM) Blends in the Presence of Multi-Walled Carbon Nanotubes

In this study the blends of polyethylene terephthalate (PET)/ethylene propylene diene rubber (EPDM) in the presence of multi-walled carbon nanotubes (MWCNT) (1 and 3?wt %) were prepared by melt compounding in an internal mixer. Mechanical and morphological properties of the nanocomposites were investigated. The thermal behaviors of the PET/EPDM nanocomposites were also investigated, by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The results of the mechanical tests showed that the tensile strength, elastic modulus and the hardness of the blends were increased with increasing CNT, while the impact strength and elongation at break decreased. The DSC and TGA results showed an increase of melting temperature (T_m) and degradation temperature of the nanocomposites with the addition of the carbon nanotubes, because the carbon nanotubes serve both as nucleating agents to increase T_m and prevent the composite from degradation to increase the thermal stability. The microstructure of the composites was evaluated through field emission scanning electron microscopy (FESEM) and the results showed a good distribution of the MWCNT within the polymer blend.     

Mechanical Properties and Corrosion Resistance of Vulcanized Silicone Rubber after Exposure to Artificial Urine

Medical devices, such as Foley catheters, which are commonly fabricated from silicone rubber, need to have excellent mechanical properties and physiological inertness. This study reports the development of a facile method to prepare silicone rubber with excellent long-term performance by controlling the vulcanization procedure parameters only. Mechanical, viscoelastic, and chemical properties of vulcanized silicone rubber were investigated. The corrosion resistance of vulcanized silicone rubber was assessed by exposure to artificial body urine for a period of up to 14 days. The mechanical properties of silicone rubber were changed via adjusting the vulcanization procedure parameters. The improved mechanical properties of silicone rubber are attributed to an increase in crosslink density resulting from the proposed vulcanization technology. After 14 days of immersion in urine, no significant changes in mechanical properties and internal structure were observed. This indicated that the as-prepared rubber samples had high tear resistance and physiological inertness. These long-term properties are important for their applications as semi-permanent implant materials, such as Foley catheter balloons in clinics. Our process of vulcanization of silicone rubber may have potential for fabrication of such medical devices.