α-Aminophosphonate derivatives of triethoxysilane for the synthesis of surface-modified silica

Abstract

A convenient synthetic route for the preparation of α-aminophosphonate derivatives of triethoxysilane, attractive precursors for silica surface functionalization, was developed. The condensation of commercially available APTES with carbonyl compounds followed by Pudovik reaction of imines with diethyl phosphite yielded desired N-phosphonomethyl functionalized (3-aminopropyl)triethoxysilanes in high yields without further purification. The chemical structures of obtained products were undoubtedly proved by ¹H, ¹³C and ³¹P NMR spectroscopy, elemental analysis and mass spectrometry.     

The fabrication of TiO<Subscript>2</Subscript> nanoparticle/ZnO nanowire arrays bi-filmed photoanode and their effect on dye-sensitized solar cells

Porous TiO₂ nanoparticles coated on ZnO nanowire arrays (TiO₂ NP/ZnO NW) as photoanode for dye-sensitized solar cell (DSSC) has been fabricated and investigated to improve the power conversion efficiency. The TiO₂ NP/ZnO NW photoanode consists of single crystalline ZnO NWs synthesized via hydrothermal method and porous TiO₂ NP film covered on the surface of ZnO NW arrays by screen printing technique. The effect of TiO₂ NPs thickness of the bi-filmed photoanode on the cell performance has been investigated, and TiO₂ NP/ZnO NW DSSC with NP thickness of ~5 μm exhibits the best efficiency of 4.68%, higher than 1.16% of ZnO NW DSSC and 3.18% of TiO₂ NPs DSSC, prepared and tested under identical conditions. The efficiency increase is attributed to the enlarged photocurrent, due to the greatly enhanced surface area for dye absorption and light harvesting efficiency resulted from TiO₂ NPs, and improved open-circuit voltage, due to reduced electron recombination by providing direct conduction pathway along ZnO NWs.     

Nano-bio interface study between Fe content TiO2 nanoparticles and adenosine triphosphate biomolecules

The advent of nano-biotechnology has inspired the interface interaction study between engineered nanoparticles (NPs) and biomolecules. The interaction between Fe content titanium dioxide (TiO₂) NPs and adenosine triphosphate (ATP) biomolecules has been envisioned. The effect of Fe content in TiO₂ matrix was studied using X-ray diffraction (XRD) and transmission electron microscopy (TEM). The increase in Fe content caused a decrease in particle size with change in morphology from spherical to one-dimensional rod structure. The Fe incorporation in the TiO₂ matrix reduced the transition temperature from anatase to rutile (A-R) phase along with formation of haematite phase of iron oxide at 400°C. The interaction of Fe content TiO₂ NPs with ATP molecule has been studied using spectroscopic method of Raman scattering and infrared vibration spectrum along with TEM. Fe content in TiO₂ has enhanced the interaction efficiency of the NPs with ATP biomolecules. Raman spectroscopy confirms that the NPs interact strongly with nitrogen (N₇) site in the adenine ring of ATP biomolecule. Engineering of Fe content TiO₂ NP could successfully tune the coordination between metal oxide NPs with biomolecules, which could help in designing devices for biomedical applications.     

Design and development of bioactive α-hydroxy carboxylate group modified MnFe2O4 nanoparticle: Comparative fluorescence study,magnetism and DNA nuclease activity

Three new α-hydroxy carboxylate group functionalized MnFe₂O₄ nanoparticles (NPs) have been developed to explore the microscopic origin of ligand modified fluorescence and magnetic properties of nearly monodispersed MnFe₂O₄ NPs. The surface functionalization has been carried out with three small organic ligands (tartrate, malate, and citrate) having different number of α-hydroxy carboxylate functional group along with steric effect. Detailed study unveils that α-hydroxy carboxylate moiety of the ligands plays key role to generate intrinsic fluorescence in functionalized MnFe₂O₄ NPs through the activation of ligand to metal charge transfer transitions, associated with ligand–Mn²⁺/Fe³⁺ interactions along with d–d transition corresponding to d–orbital energy level splitting of Fe³⁺ ions on NP surface. Further, MnFe₂O₄ NPs show a maximum 140.88% increase in coercivity and 97.95% decrease in magnetization compared to its bare one upon functionalization. The ligands that induce smallest crystal field splitting of d–orbital energy level of transition metal ions are found to result in strongest ferrimagnetic activation of the NPs. Finally, our developed tartrate functionalized MnFe₂O₄ (T-MnFe₂O₄) NPs have been utilized for studying DNA binding interaction and nuclease activity for stimulating their beneficial activities toward diverse biomedical applications. The spectroscopic measurements indicate that T-MnFe₂O₄ NPs bind calf thymus DNA by intercalative mode. The ability of T-MnFe₂O₄ NPs to induce DNA cleavage was studied by gel electrophoresis technique where the complex is found to promote the cleavage of pBR322 plasmid DNA from the super coiled form I to linear coiled form II and nicked coiled form III with good efficiency.     

Extending Surface-Enhanced Raman Spectroscopy to Liquids Using Shell-Isolated Plasmonic Superstructures

Plasmonic superstructures (PS) based on Au/SiO₂ were prepared for Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy (SHINERS) in liquid phase applications. These superstructures are composed of functionalized SiO₂ spheres with plasmonic Au nanoparticles (NPs) on their surface. Functionalization was performed with (3-aminopropyl)trimethoxysilane, (3-mercaptopropyl)trimethoxysilane and poly(ethylene-imine) (PEI). Of these three, PEI-functionalized spheres showed the highest adsorption density of Au NPs in TEM, UV/Vis and dynamic light scattering (DLS) experiments. Upon decreasing the Au NP/SiO₂ sphere size ratio, an increase in adsorption density was also observed. To optimize plasmonic activity, 61 nm Au NPs were adsorbed onto 900 nm SiO₂-PEI spheres and these PS were coated with an ultrathin layer (1–2 nm) of SiO₂ to obtain Shell-Isolated Plasmonic Superstructures (SHIPS), preventing direct contact between Au NPs and the liquid medium. Zeta potential measurements, TEM and SHINERS showed that SiO₂ coating was successful. The detection limit for SHINERS using SHIPS and a 638 nm laser was around 10⁻¹² m of Rhodamine (10⁻¹⁵ m for uncoated PS), all with acquisition settings suitable for catalysis applications.     

Sized dependence and microstructural defects on highly photocatalytic activity based on multisized CdTe quantum dots sensitized TiO2

A series of sensitized TiO₂ NPs with enhanced photocatalytic activity were prepared by different sized CdTe QDs with bifunctional ligand interlinking. The microstructures and morphologies of four different sizes of CdTe QDs and CdTe QDs sensitized TiO₂ NPs were characterized systematically by fluorescence spectroscopy, UV-Vis diffuse reflectance spectroscopy, FT-IR, XRD, XPS, FE-SEM, HRTEM, BET, and positron annihilation lifetime spectroscopy (PALS). The photocatalytic performance of CdTe QDs sensitized TiO₂ NPs was investigated by degrading MO and MB in aqueous solution under visible light irradiation. The process of degradation complied with the first-order reaction kinetics. Four different sized CdTe QDs sensitized TiO₂ exhibited higher photocatalytic activities than TiO₂. Particularly, yellow emitting CdTe QDs (3.28 nm) sensitized TiO₂ (CT_1.5) showed the best photocatalytic performance, which may be attributed to the optimal NP size, and has a moderate light absorption and electron injection. The effect of microstructural defects on CdTe QDs sensitized TiO₂ has been confirmed effectively by positron lifetime measurements.     

Functionalization and Evaluation of Inorganic Adsorbents for the Removal of Cadmium in Wastewater

This study presents the feasibility of using various functionalized substrates, Fe₃O₄ nanoparticles (NPs) and Al₂O₃ spheres, for the removal of Cd from aqueous solution. To improve the materials’ affinity to Cd, we explored four different surface modifications, namely (3-Aminopropyl) triethoxysilane (APTES), L-Cysteine (Cys) and 3-(triethoxysilyl) propylsuccinic anhydride (CAS). Particles were characterized by FTIR, FIB-SEM and DLS and studied for their ability to remove metal ions. Modified NPs with APTES proved to be effective for Cd removal with efficiencies of up to 94%, and retention ratios up to 0.49 mg of Cd per g of NPs. Batch adsorption experiments investigated the influence of pH, contact time, and adsorbent dose on Cd adsorption. Additionally, the recyclability of the adsorbent and its potential phytotoxicity and animal toxicity effects were explored. The Langmuir, Freundlich, pseudo-first-order and pseudo-second-order models were applied to describe the behavior of the Cd adsorption processes. The adsorption and desorption results showed that Fe₃O₄ NPs modified with APTES are promising low-cost platforms with low phytotoxicity for highly efficient heavy metal removal in wastewater.     

Antibacterial photocatalytic self‐cleaning poly(vinylidene fluoride) membrane for dye wastewater treatment

Membrane technology has been successfully applied for the removal of dyes from wastewater in the textile industry. A novel poly(vinylidene fluoride) (PVDF) membrane was prepared via blending with different dosages of Ag‐TiO₂‐APTES composite for dyeing waste water treatment in our study. And the effect of Ag‐TiO₂‐APTES blended into the PVDF membrane was discussed, including the rejection rate of methylene blue (MB) dye, membrane morphology, surface hydrophilicity, antibacterial activity, and a certain photocatalytic self‐cleaning performance. X‐ray diffraction and Fourier transform infrared characterization confirmed that Ag‐TiO₂ was functionalized by amount of hydroxyl group (−OH) and amino group (NH−), which provided by APTES. Contact angle measurement certified that the hydrophilicity of the membrane surface increased, with the contact angle decrease to 61.4° compared with 81.8° of original PVDF membrane. MB rejection rate was also increased to 90.1% after addition of Ag‐TiO₂‐APTES, and the rejection of original membrane was only 74.3%. The morphologies of membranes were observed by scanning electron microscope, which indicated that Ag‐TiO₂‐APTES had a good dispersion in membrane matrix and also improved the microstructure of membranes. Besides, UV irradiation experiments were performed on the composite films contaminated by MB, and the result showed that Ag‐TiO₂‐APTES nanoparticle provided PVDF membrane with a certain photodegradation capacity under UV irradiation. Moreover, antibacterial activity of the composite membrane was also demonstrated through antibacterial experiment, Escherichia coli as the representative bacteria. Perhaps, this research may provide a new way for PVDF blending modification.     

具有双亲特性的水相哑铃型SiO2纳米粒子的制备

以纳米SiO2水溶胶为原料,3?氨丙基三乙氧基硅烷(APTES)和3?氯丙基三乙氧基硅烷(CPTES)为改性剂,在水基环境下分别对SiO2纳米粒子进行改性,得到了具有亲水特性的APTES改性SiO2粒子和具有亲油特性的CPTES改性SiO2粒子水溶胶。2种粒子按不同比例混合,利用接枝在SiO2粒子表面氨基和氯丙基的取代反应,使得2种具有亲水/亲油特性的改性SiO2纳米粒子偶联,制备了粒径为40~50 nm的哑铃型SiO2纳米粒子。并通过透射电镜(TEM)、傅里叶变换红外光谱(FT?IR)、X射线光电子能谱(XPS)以及动态光散射(DLS)等方法对其进行了系统表征。结果表明,2种粒子成功偶联形成了具有哑铃型结构的水相SiO2纳米粒子,该粒子两面具有不同的亲水性,粒径近似等于APTES改性SiO2粒子和CPTES改性SiO2粒子的粒径之和。     

Correlation of the Catalytic Activity for Oxidation Taking Place on Various TiO2 Surfaces with Surface OH Groups and Surface Oxygen Vacancies

Three catalytic oxidation reactions have been studied: The ultraviolet (UV) light induced photocatalytic decomposition of the synthetic dye sulforhodamine B (SRB) in the presence of TiO₂ nanostructures in water, together with two reactions employing Au/TiO₂ nanostructure catalysts, namely, CO oxidation in air and the decomposition of formaldehyde under visible light irradiation. Four kinds of TiO₂ nanotubes and nanorods with different phases and compositions were prepared for this study, and gold nanoparticle (Au‐NP) catalysts were supported on some of these TiO₂ nanostructures (to form Au/TiO₂ catalysts). FTIR emission spectroscopy (IES) measurements provided evidence that the order of the surface OH regeneration ability of the four types of TiO₂ nanostructures studied gave the same trend as the catalytic activities of the TiO₂ nanostructures or their respective Au/TiO₂ catalysts for the three oxidation reactions. Both IES and X‐ray photoelectron spectroscopy (XPS) proved that anatase TiO₂ had the strongest OH regeneration ability among the four types of TiO₂ phases or compositions. Based on these results, a model for the surface OH group generation, absorption, and activation of molecular oxygen has been proposed: The oxygen vacancies at the bridging O^2? sites on TiO₂ surfaces dissociatively absorb water molecules to form OH groups that facilitate adsorption and activation of O₂ molecules in nearby oxygen vacancies by lowering the absorption energy of molecular O₂. A new mechanism for the photocatalytic formaldehyde decomposition with the Au/TiO₂ catalysts is also proposed, based on the photocatalytic activity of the Au‐NPs under visible light. The Au‐NPs absorb the light owing to the surface plasmon resonance effect and mediate the electron transfers that the reaction needs.     

Two-step on-particle ionization/enrichment via a washing- and separation-free approach: multifunctional TiO2 nanoparticles as desalting, accelerating, and affinity probes for microwave-assisted tryptic digestion of phosphoproteins in ESI-MS and MALDI-MS: comparison with microscale TiO2

We introduce a simplified sample preparation method using bare TiO₂ nanoparticles (NPs) to serve as multifunctional nanoprobes (desalting, accelerating, and affinity probes) for effective enrichment of phosphopeptides from microwave-assisted tryptic digestion of phosphoproteins (α-casein, β-casein and milk) in Electrospray Ionization Mass Spectrometry (ESI-MS) and Matrix Assisted Laser Desorption Ionization Mass Spectrometry (MALDI-MS). The results demonstrate that TiO₂ NPs can effectively enrich and accelerate the digestion reactions of phosphoproteins in aqueous solutions and also from complex real samples. After the microwave experiments, we directly injected the resulting solutions into the ESI-MS and MALDI-MS systems for analysis, and excellent sensitivity was achieved without the need for any washing procedure or separation process. The reasons are attributed to the high binding affinity and selectivity of TiO₂ NPs toward phosphopeptides. Thus, phosphopeptides can be adsorbed onto the TiO₂ NP surface. The digested or partially digested phosphoproteins can be concentrated onto the TiO₂ NP surface. This results in the effective or complete digestion of phosphoproteins in a short period of time (45 s). In addition, high sensitivity and sequence coverage of phosphopeptide can be obtained using TiO₂ NPs as microwave absorbers and affinity probes in MALDI-MS and ESI-MS. This is due to the photocatalytic nature of the TiO₂ NPs because the absorption of microwave radiation that can accelerate the activation of trypsin for efficient digestion of phosphoproteins and enhances the ionization of phosphopeptides. The lowest concentrations detected for ESI-MS and MALDI-MS were 0.1 μM and 10 fmol, respectively, for α-casein. Comparing the two-step approach of TiO₂ NPs with microscale TiO₂ particles, the microscale TiO₂ particles shows no effect on the microwave-assisted tryptic digestion of phosphoproteins. The current approach offers multiple advantages, such as great simplicity, high sensitivity and selectivity, straightforward and separation/washing-free technique for phosphorpeptide enrichment analysis.     

Interaction of ZnII Porphyrin with TiO2 Nanoparticles: From Mechanism to Synthesis of Hybrid Nanomaterials

The mechanism of interaction of Zn porphyrin (ZnPP) with TiO₂ surfaces is investigated with a view to optimizing the synthesis of hybrid nanomaterials. The strategy consists of studying the adsorption of ZnPP on TiO₂ flat surfaces by taking advantage of complementary surface characterization techniques. Combining a detailed X‐ray photoelectron spectroscopic analysis with AFM imaging allows ZnPP–surface and ZnPP intermolecular interactions to be discriminated. Probing the adsorption of ZnPP on TiO₂ nanoparticles (NPs) reveals the dominant role of ZnPP‐mediated interactions, which are associated with the formation of ZnPP multilayers and/or with the state of aggregation of NPs. These preliminary investigations provide a guideline to synthesizing a novel ZnPP–TiO₂ hybrid nanomaterial in a one‐step protocol. In this material, ZnPP molecules are presumably involved in the TiO₂ lattice rather than on the NP surface. Furthermore, ZnPP molecules preserve their electronic properties within the TiO₂ NPs, and this makes the ZnPP–TiO₂ hybrid nanomaterial an excellent candidate for nanomedicine and related applications, such as localization of nanoparticles in cells and tissues or in photodynamic therapy.     

Efficient hydrophobization and solvent microextraction for determination of trace nano-sized silver and titanium dioxide in natural waters

Hydrophobic silver and titanium (IV) oxide nanoparticles (commercial Ag and TiO₂ NPs with average particle sizes of 17 and 19 nm, respectively) were quantitatively transferred into organic phase in natural water samples. Five NP surface modification and solvent extraction agents (reagents) types, mercaptocarboxylic acid, alkylamine, mediator solvent, extraction solvent, and surfactant, were investigated and optimized with three-level orthogonal array design (OAD), an OA₂₇ (3¹³) matrix. The most favorable reagents and experimental conditions were then examined. The best extraction efficiencies of 78.6 and 73.7% were obtained for 1 mg L⁻¹ citrate-stabilized Ag and TiO₂ NPs, respectively, with 0.5 mM of 11-mercaptoundecanoic acid, 1.5 mM of octadecylamine, 1 mL of methanol, 150 μL of cyclohexane, 0.05 mM of tetra-n-octylammonium bromide, pH = 8.0, adsorption time of 2 h, sonication time of 3 min, and centrifugation time of 10 min. Enrichment factors were 97 and 83, for Ag and TiO₂ NPs, respectively. The optimum extraction conditions were successfully applied to genuine water samples at spiking levels of 2–100 μg L⁻¹ of Ag and TiO₂ NPs. The relative recoveries of (69.0–85.1)% and (61.5–78.5)% were obtained for Ag and TiO₂ NPs, respectively. The extracted surface-modified NPs were characterized with transmission electron microscopy, selected area electron diffraction, energy-dispersive X-ray, ultraviolet–visible, and Fourier transform infrared spectroscopic techniques. Based on the results, efficient ligand exchange and acid–base pair formation were observed on the NP surface without significant change in its original properties. The organic phase was microwave digested, and analyzed with inductively coupled plasma (ICP) optical emission spectroscopy and ICP mass spectrometry (ICP-MS). Detection limits of ICP-MS analyses of Ag and TiO₂ NPs were 0.02 and 0.07 μg L⁻¹, respectively.     

Dual‐Mode Controlled Self‐Assembly of TiO2 Nanoparticles Through a Cucurbit[8]uril‐Enhanced Radical Cation Dimerization Interaction

The realization of controllable multicomponent self‐assembly through reversible supramolecular interactions is a challenging goal, and is an important strategy for the fabrication of switchable nanomaterials. Herein we show that the self‐assembly of TiO₂ nanoparticles (NP) functionalized with methyl viologen can be controlled both by light irradiation and chemical reduction through cucurbit[8]uril‐enhanced radical cation dimerization interactions. Moreover, the controlled assembly and disassembly of this system are accompanied by switchable photocatalytic activity of the TiO₂ NPs, which shows potential application as a novel smart and recyclable photocatalyst.     

Pt 纳米颗粒在聚二甲基二烯丙基氯化铵功能化碳纳米管上的自发沉积及其对甲醇的电氧化性能

利用聚二甲基二烯丙基氯化铵(PDDA)非共价修饰的碳纳米管(CNTs)与PtCl₆^2-之间的自发氧化还原作用, 制备了Pt 纳米颗粒(Pt NPs)/CNTs-PDDA复合催化剂. PDDA在该催化剂中具有三种作用: (1) 作为金属前驱体PtCl₆^2-还原为Pt NPs 的还原剂; (2) 作为原位产生的Pt NPs 的稳定剂; (3) 在CNTs 表面形成保护膜抑制CNTs 在甲醇电催化氧化过程中的腐蚀. 采用傅里叶变换红外(FTIR)光谱、热重分析和拉曼光谱对CNTs-PDDA进行了表征, 表明PDDA通过π-π作用已成功覆盖在CNTs 表面, 并且修饰过程没有导致CNTs 结构的破坏. 采用透射电子显微镜(TEM)对Pt NPs/CNTs-PDDA 催化剂进行了表征, 结果表明, Pt NPs 均匀地分散在CNTs上, 平均粒径约2 nm, 且粒径分布范围窄. 用循环伏安法、计时电流法进一步考察了Pt NPs/CNTs-PDDA催化剂在酸性介质中对甲醇的电催化氧化的性能. 电化学测试结果表明, 与原始CNTs 负载的Pt NPs催化剂相比,Pt NPs/CNTs-PDDA催化剂具有更高的电化学活性表面积、电催化质量比活性和稳定性.     

Fundamental Insights into the Covalent Silane Functionalization of NiFe Layered Double Hydroxides

Layered double hydroxides (LDHs) are a class of 2D anionic materials exhibiting wide chemical versatility and promising applications in different fields, ranging from catalysis to energy storage and conversion. However, the covalent chemistry of this kind of 2D materials is still barely explored. Herein, the covalent functionalization with silanes of a magnetic NiFe-LDH is reported. The synthetic route consists of a topochemical approach followed by anion exchange reaction with surfactant molecules prior to covalent functionalization with the (3-aminopropyl)triethoxysilane (APTES) molecules. The functionalized NiFe-APTES was fully characterized by X-ray diffraction, infrared spectroscopy, electron microscopy, thermogravimetric analysis coupled with mass spectrometry and ²⁹Si solid-state nuclear magnetic resonance, among others. The effect on the electronic properties of the functionalized LDH was investigated by a magnetic study in combination with Mössbauer spectroscopy. Moreover, the reversibility of the silane-functionalization at basic pH was demonstrated, and the quality of the resulting LDH was proven by studying the electrochemical performance in the oxygen evolution reaction in basic media. Furthermore, the anion exchange capability for the NiFe-APTES was tested employing Cr^VI, resulting in an increase of 200 % of the anion retention. This report allows for a new degree of tunability of LDHs, opening the door to the synthesis of new hybrid architectures and materials.     

Surface-modified TiO(2) nanoparticles as affinity probes and as matrices for the rapid analysis of phosphopeptides and proteins in MALDI-TOF-MS

We utilized three different types of TiO₂ nanoparticles (NPs) namely TiO₂‐dopamine, TiO₂‐CdS and bare TiO₂ NPs as multifunctional nanoprobes for the rapid enrichment of phosphopeptides from tryptic digests of α‐ and β‐casein, milk and egg white using a simplified procedure in MALDI‐TOF‐MS. Surface‐modified TiO₂ NPs serve as effective matrices for the analysis of peptides (gramicidin D, HW6, leucine‐enkephalin and methionine‐enkephalin) and proteins (cytochrome c and myoglobin) in MALDI‐TOF‐MS. In the surface‐modified TiO₂ NPs‐based MALDI mass spectra of these analytes (phosphopetides, peptides and proteins), we found that TiO₂‐dopamine and bare TiO₂ NPs provided an efficient platform for the selective and rapid enrichment of phosphopeptides and TiO₂‐CdS NPs efficiently acted as the matrix for background‐free detection of peptides and proteins with improved resolution in MALDI‐MS. We found that the upper detectable mass range is 17 000 Da using TiO₂‐CdS NPs as the matrix. The approach is simple and straightforward for the rapid analysis of phosphopeptides, peptides and proteins by MALDI‐MS in proteome research.     

Preparation and properties of poly(styrene-co-maleic anhydride)/silica hybrid materials by the in situ sol–gel process

Poly(styrene-co-maleic anhydride)/silica hybrid material has been successfully prepared from styrene–maleic anhydride copolymer and tetraethoxysilane (TEOS) in the presence of a coupling agent (3-aminopropyl)triethoxysilane (APTES) by an in situ sol–gel process. It was observed that the gel time of sol–gel solution was dramatically influenced by the amount of APTES. The hybrid material exhibits optical transparency almost as good as both silica gel and the copolymer. The covalent bonds between organic and inorganic phases were introduced by the aminolysis reaction of the amino group with maleic anhydride units of copolymer to form a copolymer bearing trimethoxysilyl groups, which undergo hydrolytic polycondensation with TEOS. The differential scanning calorimetry (DSC) showed that the glass transition temperature of the hybrid materials increases with increasing of SiO₂ composition. Photographs of scanning electron microscopy (SEM) and atomic force microscopy (AFM) inferred that the size of the inorganic particles in the hybrid materials was less than 20 nm. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1607–1613, 1998     

Biogenic synthesis from <Emphasis Type="Italic">Prunus</Emphasis> × <Emphasis Type="Italic">yedoensis</Emphasis> leaf extract,characterization, and photocatalytic and antibacterial activity of TiO<Subscript>2</Subscript> nanoparticles

Green synthesis of TiO₂ nanoparticles (NPs) from Prunus × yedoensis leaf extract (PYLE), and their application for removal of phosphate and their antibacterial activity, were studied for the first time. NPs were obtained using a green chemistry approach from 0.1 M TiO₂ and PYLE at ratio of 1:1 (v/w). Initial confirmation of production of TiO₂ NPs was provided by a color change from white to light yellow, then calcination was performed at 500 °C for 1 h. The TiO₂ NPs were characterized using various analytical techniques such as ultraviolet–visible (UV–Vis) spectroscopy, X-ray diffraction analysis, Fourier-transform infrared spectroscopy, Raman spectroscopy, UV–Vis diffuse reflectance spectroscopy, X-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. The results indicated that the optimal amount of TiO₂ NPs for removal of phosphate was 10 mg/l (10 ppm) with duration of 25 min. Furthermore, the antibacterial activity of TiO₂ NPs was also investigated using two different bacteria (Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli) in aqueous medium. The results revealed highly efficient sunlight-driven photocatalytic and antibacterial activity of TiO₂ NPs.     

Luminescence of Silica-Pillared Clays and Gels Derived from Aminofunctional Silanes

Silica-pillared clays were prepared by reacting Na-montmorillonite aqueous suspensions with (3-aminopropyl)triethoxysilane (APTEOS). It was indicated that cubic octamers [NH ₃ ⁺ (CH₂)₃SiO_3/2]₈ derived from APTEOS are intercalated with two different conformations of the alkyl chains. Namely, the cubic octamers are intercalated with the alkyl chains parallel to the silicate layers at low concentration of APTEOS, and then intercalated with the alkyl chains normal to the silicate layers with increase in APTEOS. Gels were prepared from the reaction of APTEOS with acetic acid and by the conventional sol-gel process using (3-aminopropyl)trimethoxysilane (APTMOS). The luminescence spectra of the gel prepared by the sol-gel process and the intercalated clays were similar to that of silica gels. The gel from APTEOS with acetic acid showed broad visible luminescence. The luminescence spectra and the structures of these materials were described.