含氮螯合配体过渡金属配合物修饰的缺位型Keggin多酸盐

在常温条件下合成了铜-邻菲啰啉修饰的结构独特的多酸衍生物H₄[Cu(phen)(H₂O)][Cu(phen)][α-SiW₁₁O₃₉]·3H₂O(1). 该化合物分子中2个独立的非二聚体的铜-邻菲啰啉平行地与缺位多酸空穴外的氧配位键合, 通过元素分析、红外光谱、热重分析和X射线单晶衍射对其结构进行了表征. 结果表明, 该化合物属三斜晶系, P1空间群, 晶胞参数a=1.3624(2) nm, b=1.4133(2) nm, c=2.0470(3) nm, α=97.840(3)°, β=95.117(3)°, γ=112.483(3)°.     

Keggin POM microtubes: a coincident product of crystal growth and species transformation

Microtubes of alpha-K4SiW12O40 with the length around 1 cm and inner diameter and wall thickness in the ranges of 7-55 mum and 3-15 mum, respectively, were copiously fabricated by a one-step, template-free aqueous synthesis. The formation mechanism is discussed. The discovered tubular structure of the polyoxometalate is believed to be promising for use in templates, as a precursor of tungsten oxide ceramic microtubes, and for other uses associated with tubular structures.     

Influence of chemical modification of polymeric resin on retention of polar compounds in solid-phase extraction

Summary Three polymeric adsorbents, two of which had been chemically modified with different hydrophilic functional moieties and the third, which was the corresponding unmodified polystyrene-divinylbenzene (PSDVB) resin, were compared for solid-phase extraction (SPE) of several polar pesticides and phenolic compounds from water samples. The SPE system was online coupled to a liquid chromatograph with UV detector. Chemical modification of the PS-DVB resin with either 2-carboxy-3/4-nitrobenzoyl or 2,4-dicarboxybenzoyl, improved the efficiency of the SPE process by increasing polar interactions with the analytes. The adsorbent with the nitro group gave higher recoveries, mainly for the most polar analytes. This adsorbent enabled 100 mL river water to be preconcentrated to determine the target analytes in this matrix.     

1,10-邻菲啰啉-过渡金属修饰的Keggin型多酸基化合物的合成、结构及性能研究

通过水热合成方法合成了1个新的Keggin型多酸基化合物[Zn6(phen)12(PW12O40)4](1)(phen=1,10-邻菲罗啉),并通过元素分析、红外光谱和X-射线单晶衍射方法确定了该化合物的晶体结构.目标化合物展示了1个一维的链式结构,又通过氢键构筑了1个三维雪花形超分子结构.利用循环伏安法研究了该化合物的电化学行为,并研究了目标化合物对亚甲基蓝的光催化降解性能.     

Selective formation of a polar incomplete coordination cage induced by remote ligand substituents

Instead of highly symmetrical T-symmetry cages common in self-assembly, the p-NMe(2)-substituted triphosphine CH(3)C{CH(2)P(4-C(6)H(4)NMe(2))(3) gives open, polar C(3) symmetry cages [Ag(6)(triphos)(4)X(3)](3+) which lack one of the expected face-capping anions; despite its subtlety this difference occurs selectively in solution and two examples have been crystallographically characterised.     

Dielectric response of one-dimensional polar chains

We propose a theory for the dielectric constant of materials made of parallel infinite one-dimensional chains of dipoles. Each dipole is allowed to rotate in three dimensions. Monte Carlo simulations show that the Kirkwood factor of the chain grows with increasing dipole moment much faster than in the case of three-dimensional polar fluids. With increasing dipole moment or cooling the one-dimensional chain undergoes a continuous order-disorder transition to the ferroelectric phase, in which the dielectric constant is limited by the size of ferroelectric domains along the chain.     

Surface modification of activated polymeric matrices by dendritic attachments

Aware of the growing interest in materials that exhibit specific physiochemical properties and potential applications, we focused our work on modifying commercial agarose with polyfunctional dendrons capable of molecular recognition through hydrogen bonding. 2,6‐Di(acylamino)pyridine moieties within the internal superstructure of dendritic macromolecules have been reported to be capable of forming H‐bonded complexes with imide groups, such as barbituric acid and its derivatives. We report the synthesis of new dendrons possessing multiple 2,6‐di(acylamino)pyridinyl sites, each capable of molecular recognition, and the development of new polymeric supports of an activated agarose matrix by surface modification. From comparative studies of the beads modified by different dendrons, we found improved results in those dendritic supports possessing 2,6‐di(acylamino)pyridinyl moieties, except when their juxtaposition between the groups promoted inner H bonds. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2779–2786, 2000     

Surface modification of polymeric micelles by strain-promoted alkyne-azide cycloadditions

Organomicelles modified by surface dibenzylcyclooctyne moieties can conveniently be functionalized by strain-promoted alkyne-azide cycloadditions. The ligation approach is highly efficient, does not require toxic reagents and is compatible with a wide variety of functional modules. Interactions of proteins with surface ligands of the micelles have been studied by AFM, which revealed that it leads to disassembly of the particles thereby providing a mechanism for triggered drug release.     

Self-assembly of a water-soluble endohedrally functionalized coordination cage including polar guests

Coordination cages containing endohedrally functionalized aromatic cavities are scarce in the literature. Herein, we report the self-assembly of a tetra-cationic super aryl-extended calix[4]pyrrole tetra-pyridyl ligand into a water-soluble Pd(ii)-cage featuring two endohedral polar binding sites. They are defined by the four pyrrole NHs of the calix[4]pyrrole unit and the four inwardly directed α-protons of the coordinated pyridyl groups. The efficient assembly of the Pd(ii)-cage requires the inclusion of mono- and ditopic pyridyl N-oxide and aliphatic formamide guests. The monotopic guests only partially fill the cage''s cavity and require the co-inclusion of a water molecule that is likely hydrogen-bonded to the endohedral α-pyridyl protons. The ditopic guests are able to completely fill the cage''s cavity and complement both binding sites. We observed high conformational selectivity in the inclusion of the isomers of α,ω-bis-formamides. We briefly investigate the uptake and release mechanism/kinetics of selected polar guests by the Pd(ii)-cage using pair-wise competition experiments.

A tetra-cationic calix[4]pyrrole tetra-pyridyl ligand self-assembles into a water-soluble Pd(ii)-cage featuring two endohedral polar binding sites. The Pd(ii)-cage encapsulates pyridyl N-oxide and aliphatic formamide guests in water.     

Chemical modification of polymeric microchip devices

Analytical polymeric microchips in both fluidic and array formats offer short analysis times, coupling of many sample processing and chemical reaction steps on one platform with minimal sample and reagent consumption, as well as low cost, minimal fabrication times and disposability. However, the invariable bulk properties of most commercial polymers have driven researchers to develop new modification strategies. This article critically reviews the scope and development of chemical modifications of such polymeric chips since 2003. Surface modifications were based on chemical derivatization or activation of surface layers with reagent solutions, reactive gases and irradiation. Bulk modification of polymer chips used newly incorporation of monomers with selective chemical functionalities throughout the bulk polymer material and integrated the chip modification and fabrication into a single step. Such modifications hold a great promise for establishing a true ‘lab-on-chip’ as can be seen from many novel applications for modulating electroosmosis, suppressing protein adsorption in microchip capillary electrophoretic separations, extraction of analytes and for zone-specific binding of enzymes and other biomolecules.     

Some aspects of bonding and binding in polymeric chains

The status of theoretical calculations on polymers is illustrated by two specific problems. The first one is the interpretation of ESCA results on polymers by suitable ab initio calculations. The second problem is the very timely one of bond alternation in polymers. The reliability of theoretical calculations at various levels and the possible central role of electron correlation are discussed.     

Towards tuning the packing and entanglement of zigzag coordination chains by terminal ligands

Solvothermal reactions of trans-stilbene-4,4'-dicarboxylic acid (H(2)STDC) and zinc(ii) acetate in the presence of systematically varied terminal ligands afforded a series of supramolecular architectures with formula [Zn(STDC)(py)(2)].py (1), [Zn(STDC)(bipy)(H(2)O)].0.5py.H(2)O (2), [Zn(STDC)(biql)] (3), [Zn(STDC)(phen)].solv (solv = DMSO, 4a; DMF, 4b), where py = pyridine, bipy = 2,2'-bipyridine, biql = 2,2'-biquinoline, phen = 1,10-phenathroline. X-Ray analyses revealed that all the compounds consist of infinite 1D zigzag polymer chains. Investigations based on intermolecular interactions illustrate that the chelate terminal ligands play a critical role in determining the packing/entangling modes of the chains and the porosity of the final three-dimensional architectures. In compounds 1 and 2, the weak hydrogen bonding and/or pi-pi stacking interactions assemble the parallel chains into diamond nets with four- and two-fold interpenetration, respectively. In compound 3, the hydrogen bonding and pi-pi stacking interactions collaborate to arrange the chains in two different directions, generating a 3D supramolecular architecture with high catenation. The most interesting packing occurs in 4. Extensive pi-pi stacking interactions involving the terminal and bridging ligands arrange the chains in four different directions, and the chains are hierarchically entangled to produce an unprecedented 3D microporous framework with high stability. Based on comparative investigations, the effects of the terminal and bridging ligands on the packing of zigzag chains have been discussed. The reversible guest inclusion properties of 2 and 4 have also been demonstrated.     

Functionalization of single-walled carbon nanotube by the covalent modification with polymer chains

A single-walled carbon nanotube (SWNT), which had been oxidized by incubation with a mixture of nitric acid and sulfuric acid to afford carboxyl groups at its ends, was incubated with an azo-type radical initiator carrying poly(2-methacryloyloxyethyl D-glucopyranoside) blocks at both ends (PMEGlc-initiator). Due to its high radical trapping activity, the SWNT could be coated with glycopolymers corresponding to the cloven macro-initiator (PMEGlc-SWNT). The PMEGlc-SWNT indicated a lectin (concanavalin A, Con A)-induced aggregation, and a buckey sheet composed of PMEGlc-SWNT could be used for the recovery of Con A from its aqueous solution. Furthermore, the carboxylated SWNT was also incubated with a terminal-aminated poly(N-isopropyl acrylamide) (PIPA) and 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide HCl salt (PIPA-SWNT). The PIPA-SWNT indicated a definite temperature-responsiveness in the turbidity of its dispersion. These methods would be promising to modify SWNT with various functional polymers.     

Water-assisted self-assembly of harmonic single and triple helices in a polymeric coordination complex

A novel two-dimensional coordination polymer containing infinite, coherently pitched single and triple helical motifs is formed by the self-assembly of Cd2+, succinate, water and a bipyridyl ligand.     

Novel synthesis of polymeric phase transfer catalyst containing polar unit

Soluble polymeric phase transfer catalysts (PTCs) containing benzyltributylphosphonium chloride moieties and p-nitrophenoxy group or N,N-dimethylacrylamide as a polar unit were prepared via two-step reactions from polymers with chloromethyl group and polar units. These polymers were synthesized by copolymerization of p-chloromethylstyrene and the corresponding monomer or substitution of some parts of chloromethyl group with potassium p-nitrophenoxide. When the obtained polymers were added, the phase transfer catalyzed reaction of benzylchloride with solid potassium acetate to proceed smoothly. The catalytic activity was strongly affected by the content of phosphonium chloride and the varieties of comonomer unit in the polymeric PTC. The polymeric PTC containing N,N-dimethylacrylamide unit showed much higher catalytic activity than the corresponding low molecular weight PTC when the phase transfer catalyzed reaction was carried out in low polar solvent. © 1994 John Wiley & Sons, Inc.     

Synthesis and structure of a nickel coordination polymer with channels hosting polyanion chains

A porous coordination polymer, {[Ni(Dpdo)₄(H₂O)₂][H(H₂O)_6.5](PMo₁₂O₄₀)} _n (I), where Dpdo is 4,4′-ipyridine-N,N′-hoxide, templated by polyanion chains has been synthesized through the self-assembly of Ni²⁺ ions and Dpdo ligands in acetonitrile-water solutions and characterized by elemental analysis, IR spectra, and single-crystal X-ray diffraction. The structure of compound I constructed from the polyanion [PMo₁₂O₄₀]³⁻ and the coordinated cation [Ni(Dpdo)₄(H₂O)₂]²⁺ exhibits a 3D non-interwoven frameworks with large channels occupied by the poly-Keggin anion chains as guests.