Synthesis and Properties of Sodium and Europium(III) Cryptates Incorporating the 2,2′-Bipyridine 1,1′-Dioxide and 3,3′-Biisoquinoline 2,2′-Dioxide Units

The sodium and europium cryptates of the new macrobicyclic ligands 2 and 3 incorporating the 2,2′-bipyri dine 1,1′-dioxide and 3,3′-biisoquinoline 2,2′-dioxide units, respectively, have been prepared. The Eu^III complexes present characteristic ¹H-NMR spectra, showing large shifts, and are strongly luminescent in aqueous solution. These markedly improved luminescent properties, compared to the europium cryptate of the parent macrobicyclic ligand 1 , may be ascribed at least in part to a better shielding of the bound cation by the N-oxide sites.     

New 2,2′-Bipyridine Derivatives and Their Luminescence Properties with Europium(III) and Terbium(III) Ions

Twenty differently substituted 2,2′,2″,2? -[(2,2′-bipyridine-6,6′-diyl)bis(methylenenitrilo)]tetrakis(acetc acids) 75–94 were synthesized with the purpose of developing new markers to be used in bioaffinity assays based on the unique luminescence properties of Eu^III and Tb^III ions. The relative luminescence yields, excitation maxima, and emission decay constants were determined for the corresponding Eu^III and Tb^III chelates. The substituents at the bipyridine moiety had a significant effect on the luminescence properties: the best relative luminescence yields R were obtained for ligands with electron-donating substituents (e.g. Me, Ph), electron-withdrawing substituents (e.g. NO₂, COOH) had a reverse effect. However, no clear correlation between the relative luminescence yields and the substituent parameters was found.     

Influence of Chelating Groups on the Luminescence Properties of Europium(III) and Terbium(III) chelates in the 2,2′-bipyridine series

Eight different 2,2′-bipyridine derivatives, i.e. 2, 5, 8, 10, 12, 13, 15 , and 19 (Schemes 1 and 2), were prepared to study the influence of the chelating groups on the luminescence properties of their Eu^III and Tb^III chelates. According to our luminescence results, 2,2′-(methylenenitrilo)bis(acetic acid) as well as (methylenenitrilo)bis-(methylphosphonic acid) in 6- and 6′-position of 2,2′-bipyridine is a suitable group when developing luminescent markers for bioaffinity assays based on time-resolved luminescence measurement.     

Poly(3,3′-dimethoxy-2,2′-bithiophene): Synthesis and comparison with poly(3-methoxythiophene)

A new electroactive polymer, namely poly(3,3′-dimethoxy-2,2′-bithiophene) has been prepared by voltammetric polymerization of 3,3′-dimethoxy-2,2′-bithiophene. Due to a different coupling pattern (equivalent to “head-to-head,” and “tail-to-tail” coupled alkoxythiophene rings), poly(3,3′-dimethoxy-2,2′-bithiophene) exhibits different voltammetric properties than the corresponding “head-to-tail” coupled polymer, i.e., poly(3-methoxythiophene). Poly(3,3′-dimethoxy-2,2′-bithiophene) gives very sharp oxidation and reduction peaks indicating an abrupt insulator to conductor transition. This hypothesis was corroborated by the studies of relative resistance as a function of electrode potential. Sharper and better-defined redox peaks may indicate better stereoregularity of poly(3,3′-dimethoxy-2,2′-bithiophene) as compared to poly(3-methoxythiophene) since in this compound the 5,5′-coupling positions are geometrically equivalent and no coupling defects are expected. © 1992 John Wiley & Sons, Inc.     

Metal‐Ion Sensing Europium(III) Complexes with Bidentate Phosphine Oxide Ligands Containing a 2,2′‐Bipyridine Framework

Novel Eu^III complexes with bidentate phosphine oxide ligands containing a bipyridine framework, i.e., [3,3′‐bis(diphenylphosphoryl)‐2,2′‐bipyridine]tris(hexafluoroacetylacetonato)europium(III) ([Eu(hfa)₃(BIPYPO)]) and [3,3′‐bis(diphenylphosphoryl)‐6,6′‐dimethyl‐2,2′‐bipyridine]tris(hexafluoroacetylacetonato)europium(III) ([Eu(hfa)₃(Me‐BIPYPO)]), were synthesized for lanthanide‐based sensor materials having high emission quantum yields and effective chemosensing properties. The emission quantum yields of [Eu(hfa)₃(BIPYPO)] and [Eu(hfa)₃(Me‐BIPYPO)] were 71 and 73%, respectively. Metal‐ion sensing properties of the Eu^III complexes were also studied by measuring the emission spectra of Eu^III complexes in the presence of Zn^II or Cu^II ions. The metal‐ion sensing and the photophysical properties of luminescent Eu^III complexes with a bidentate phosphine oxide containing 2,2′‐bipyridine framework are demonstrated for the first time.     

Development of Luminescent Europium(III) and Terbium(III) chelates of 2,2′:6′,2″- terpyridine derivatives for protein labelling

The synthesis and luminescence properties are reported for 20 different chelates composed of 2,2′:6′,2″-terpyridine as the energy-absorbing and donating group, Eu^IIIand Tb^III as the emitting ions, methylenenitrilo(acetic acids) as the stabel chelate-forming moieties, and isothiocyanato or(4,6-dichloro-1,3,5-triazin-2-yl)amino groups as the activated moieties for coupling to biomolecules.     

新型铕三元配合物的合成及光致和电致发光性能研究

利用氮杂苯并 [9,10 ]菲类中性配体 ,合成了两个新型铕三元配合物Eu(DBM) 3 L1和Eu(DBM) 3 L2 (DBM为二苯甲酰甲烷 ;L1,L2 为氮杂苯并 [9,10 ]菲类中性配体 ) ,以元素分析、红外光谱和紫外光谱对其进行了表征 .两种配合物在固体状态下的发射光谱都表现出较强的三价铕离子的特征发射 ,第二配体对中心离子具有较好的协同敏化发光作用 .以TPD和Gd(DBM) 3 bath (bath =4,7 二苯基 1,10 菲咯啉 )分别作空穴传输材料和电子传输材料 ,以发光配合物和TPD的共蒸镀掺杂作为发光层 ,制备了如下结构的三层器件ITO/TPD( 3 0nm) /Eu(DBM) 3 L1(L2 )∶TPD( 1∶2 ) ( 5 0nm) /Gd(DBM) 3 bath( 3 0nm) /Mg∶Ag ,并研究了器件的光电特性 .结果表明 :这两种配合物具有优良的成膜性和电子传输性 ,而氮杂苯并 [9,10 ]菲类中性配体对提高配合物的电子传输性起着至关重要的作用 .以Eu(DBM) 3 L1和Eu(DBM) 3 L2 作为发光材料制备的器件均具有较低的启亮电压 ( 3V) ,分别在 12V ,5 2mA·cm-2 和 13V ,42mA·cm-2 时获得最大亮度为 14 8cd·m-2 和 110cd·m-2 的纯正红色发光     

Synthesis and properties of novel polyimides derived from 2,2′,3,3′‐benzophenonetetracarboxylic dianhydride

A new synthetic route to 2,2′,3,3′‐BTDA (where BTDA is benzophenonetetracarboxylic dianhydride), an isomer of 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA, is described. Single‐crystal X‐ray diffraction analysis of 2,2′,3,3′‐BTDA has shown that this dianhydride has a bent and noncoplanar structure. The polymerizations of 2,2′,3,3′‐BTDA with 4,4′‐oxydianiline (ODA) and 4,4′‐bis(4‐aminophenoxy)benzene (TPEQ) have been investigated with a conventional two‐step process. A trend of cyclic oligomers forming in the reaction of 2,2′,3,3′‐BTDA and ODA has been found and characterized with IR, NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, and elemental analyses. Films based on 2,2′,3,3′‐BTDA/TPEQ can only be obtained from corresponding polyimide (PI) solutions prepared by chemical imidization because those from their polyamic acids by thermal imidization are brittle. PIs from 2,2′,3,3′‐BTDA have lower inherent viscosities and worse thermal and mechanical properties than the corresponding 2,3′,3′,4′‐BTDA‐ and 3,3′,4,4′‐BTDA‐based PIs. PIs from 2,2′,3,3′‐BTDA and 2,3′,3′,4′‐BTDA are amorphous, whereas those from 3,3′,4,4′‐BTDA have some crystallinity, according to wide‐angle X‐ray diffraction. Furthermore, PIs from 2,2′,3,3′‐BTDA have better solubility, higher glass‐transition temperatures, and higher melt viscosity than those from 2,3′,3′,4′‐BTDA and 3,3′,4,4′‐BTDA. Model compounds have been prepared to explain the order of the glass‐transition temperatures found in the isomeric PI series. The isomer effects on the PI properties are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2130–2144, 2004     

Synthesis and properties of aromatic polyimides derived from 2,2,′3,3′‐biphenyltetracarboxylic dianhydride

2,2,′3,3′‐Biphenyltetracarboxylic dianhydride (2,2,′3,3′‐BPDA) was prepared by a coupling reaction of dimethyl 3‐iodophthalate. The X‐ray single‐crystal structure determination showed that this dianhydride had a bent and noncopolanar structure, presenting a striking contrast to its isomer, 3,3,′4,4′‐BPDA. This dianhydride was reacted with aromatic diamines in a polar aprotic solvent such as N,N‐dimethylacetamide (DMAc) to form polyamic acid intermediates, which imidized chemically to polyimides with inherent viscosities of 0.34–0.55 dL/g, depending on the diamine used. The polyimides from 2,2,′3,3′‐BPDA exhibited a good solubility and were dissolved in polar aprotic solvents and polychlorocarbons. These polyimides have high glass transition temperatures above 283°C. Thermogravimetric analyses indicated that these polyimides were fairly stable up to 500°C, and the 5% weight loss temperatures were recorded in the range of 534–583°C in nitrogen atmosphere and 537–561°C in air atmosphere. All polyimides were amorphous according to X‐ray determination. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1425–1433, 1999     

Form III of 2,2′,4,4′,6,6′‐hexanitro­azobenzene (HNAB‐III)

The crystal structure of form III of the title compound, HNAB [systematic name: bis(2,4,6‐trinitro­phenyl)diazene], C₁₂H₄N₈O₁₂, has finally been solved as a pseudo‐merohedral twin (monoclinic space group P2₁, rather than the ortho­rhombic space group C222₁ suggested by diffraction symmetry) using a dual space recycling method. The significant differences in the room‐temperature densities of the three crystalline forms allow examination of molecular differences due to packing arrangements. An interesting relationship with the stilbene analog, HNS, is discussed. Interatomic separations are compared with other explosives and/or nitro‐containing compounds.     

Biselenienyl series. II. Synthesis and resolution of 2,2′-dinitro-3,3′-biselenienyl-4,4′-dicarboxylic acid

2,2′-Dinitro-3,3′-biselenienyl-4,4′-dicarboxylic acid (VI), the first recorded compound of the 3,3′-biselenienyl series, has been prepared and resolved into its optical antipodes by fractional crystallization of its brucine salt. On the basis of the quasi-racemate method of Fredga and the O.R.D. spectra, to the dextrorotatory acid is assigned the R configuration.     

Structures of 3,3′-dicarbometoxy-2,2′-bipyridine complexes with silver(I) and copper(II) cations

The structures of 3,3′-dicarbometoxy-2,2′-bipyridine (dcmbpy) complexes with copper(II) and silver(I) cations have been determined using single crystal X-ray-diffraction. The crystals of Cu(dcmbpy)Cl₂ are monoclinic, C2/c, a = 16.966(3), b = 18.373(3), c = 13.154(2) Å, β = 126.543(3)°. The crystals of Ag(dcmbpy)NO₃ · H₂O are also monoclinic, C2/c, a = 16.7547(13), b = 11.0922(9), c = 18.7789(18) Å, β = 100.228(7)°. The results have been compared with the literature data on the complexes of dcmbpy and its precursors: 2,2′-bipyridine (bpy) and 3,3′-dicarboxy-2,2′-bipyridine (dcbpy). Two types of complexes of 3,3′-carboxy derivatives of bpy are distinguished: (1) with metal atom bonded to two N atoms of the same molecule and (2) with metal atom bonded to two N atoms of two different molecules. The Cu(dcmbpy)Cl₂ complex belongs to the first type, whereas Ag(dcmbpy)NO₃ · H₂O belongs to the second type.     

Synthesis and Structure of New Trimethylplatinum(IV) Iodide Complexes of 2,2′‐Bipyridine Ligands

The synthesis and structural characterization of four new trimethylplatinum(IV) iodide complexes of 2,2′‐bipyridine ligands {[PtMe₃(4,4′‐Clbipy)I] ( 1 ), [PtMe₃(4,4′‐Brbipy)I] ( 2 ), [PtMe₃(4,4′‐CNbipy)I] ( 3 ) and [PtMe₃(4,4′‐NO₂bipy)I] ( 4 )} are reported. The ¹H NMR spectra of the complexes reveal the presence of two chemically distinct methyl groups in the complexes. X‐ray crystal structures of complexes 1 – 4 show that the platinum metal center in each of the complexes form distorted octahedral structure being surrounded by methyl groups, bipyridine ligand, and iodine atom. Furthermore, the crystal packing study shows that self‐assembly of the complexes are governed by weak hydrogen bonding and other non‐covalent interactions such as π ··· π, halogen ··· π and C–H ··· π interactions. Complex 1 exhibits infinite one‐dimensional zigzag chain structure and other three complexes form infinite ladder type structures.     

Synthesis,Coordination, and Spectroscopic Properties of 2,2′‐Bipyridyldimesitylpalladium(II) and 6‐Mesityl‐2,2′‐bipyridyldimesitylpalladium(II)

The synthetic route to the dimesitylpalladium(II) complex [(bpy)PdMes₂] ( 1 ) (Mes = mesityl = 2,4,6‐trimethyl phenyl) does not only give the desired compound but also the 6‐mesityl‐2,2′bipyridyldimesitylpalladium [(6‐Mes‐bpy)PdMes₂] ( 2 ) complex and the free ligand 6,6′‐dimesityl‐2,2′‐bipyridine in reasonable yields. Single crystals of 2 were examined by X‐Ray diffraction. The compound reveals a sterically crowded molecular structure. An intramolecular π‐stacking interaction was found between the mesityl substituent on the bipyridine ligand and the adjacent mesityl ligand. The electrochemical behaviour of 1 and 2 together with a related compound was examined at various temperatures showing two reversible reduction reactions and reversible one‐electron oxidation steps at low temperatures. The latter are assigned to Pd^II/Pd^III couples.     

Synthesis of 3,3′ -methylenediisoxazoles

The synthesis of new 3,3′-methylenediisoxazoles (III), from 1,3-dichloromalondioxime (IX) and acetylenic compounds is reported. We have studied the transformation of the chloronitroso compound (VII), obtained from malondioxime (V) in ether with gaseous chlorine at ?70°, into IX. It was found that this was possible only by heating a DIYISO solution. The characteristics of the compounds which are described are reported.     

Iridium Complexes of 2,2′‐Bidipyrrins

The reaction of [{Ir(cod)(μ‐Cl)}₂] and K₂CO₃ or of [{Ir(cod)(μ‐OMe)}₂] alone with the non‐natural tetrapyrrole 2,2′‐bidipyrrin (H₂BDP) yields, depending on the stoichiometry, the mononuclear complex [Ir(cod)(HBDP)] or the homodinuclear complex [{Ir(cod)}₂(BDP)]. Both complexes react readily with carbon monoxide to yield the species [Ir(CO)₂(HBDP)] and [{Ir(CO)₂}₂(BDP)], respectively. The results from NMR spectroscopy and X‐ray diffraction reveal different conformations for the tetrapyrrolic ligand in both complexes. The reaction of [{Ir(coe)₂(μ‐Cl)}₂] with H₂BDP proceeds differently and yields the macrocyclic [4e^?,2H⁺]‐oxidized product [IrCl₂(9‐Meic)] (9‐Meic = monoanion of 9‐methyl‐9,10‐isocorrole), which can be addressed as an iridium analog of cobalamin.     

Synthesis,Crystal Structures and Fluorescent Properties of Two 2,2′‐Biquinoline‐4,4′‐dicarboxylate‐based Cadmium(II) and Cobalt(II) Complexes

Two metal‐organic coordination polymers with one‐dimensional infinite chain motif, [Cd(bqdc)(phen)₂]_n ( 1 ) and [Co(bqdc)(phen)(H₂O)₂]_n ( 2 ) (H₂bqdc = 2,2′‐biquinoline‐4,4′‐dicarboxylic acid, phen = 1,10‐phenanthroline), have been synthesized under similar solv/hydrothermal conditions and fully structural characterized by elemental analysis, IR, and single‐crystal X‐ray crystallography. Their thermal stability and photoluminescence properties were further investigated by TG‐DTA and fluorescence spectra. In both complexes, the adjacent metal ions (Cd^II for 1 and Co^II for 2 ) are linked together by dicarboxylate groups of bqdc dianions in chelating bidentate and monodentate modes, respectively, generating a zigzag chain for 1 and linear chain for 2 . The relatively higher thermal stability up to 324 °C for 1 and strong fluorescence emissions jointly suggest that they are good candidates for luminescent materials.