Recent Progress in All‐Polymer Solar Cells Based on Wide‐Bandgap p‐Type Polymers

All‐polymer solar cells (all‐PSCs), with the photoactive layer exclusively composed of polymers as both donor and acceptor, have attracted growing attention due to their unique merits in optical, thermal and mechanical durability. Through the combined strategies in materials design and device engineering, recently the power conversion efficiencies of single‐junction all‐PSCs have been boosted up to 11 %. This review focuses on the recent progress of all‐PSCs comprising of wide band‐gap p‐type polymers, especially those based on the units of thieno[3,4‐c]pyrrole‐4,6(5H)‐dione], fluorinated benzotriazole, benzo[1,2‐c:4,5‐c′]dithiophene‐4,8‐dione, and pyrrolo[3,4‐f]benzotriazole‐5,7(6H)‐dione. Meantime, several categories of n‐type polymers used to match with these polymer donors are also reviewed. Finally, a brief summary of the strategies of molecular design and morphology optimization is given, and strategies toward further improving performance of all‐PSCs are outlined.     

Design Approach of Lifetime Extending Thermally Activated Delayed Fluorescence Sensitizers for Highly Efficient Fluorescence Devices

In this work, a design approach of three thermally activated delayed fluorescence (TADF) emitters to extend the device lifetime of the TADF sensitized fluorescent devices was studied. Three TADF materials, 5-{4,6-bis[4-(tert-butyl)phenyl]-1,3,5-triazin-2-yl}-2-(10,15-diphenyl-10,15-dihydro-5H-diindolo[3,2-a:3′,2′-c]carbazol-5-yl)benzonitrile (tTCNTruX), 4-[3-cyano-4-(10,15-diphenyl-10,15-dihydro-5H-diindolo[3,2-a:3′,2′-c]carbazol-5-yl)phenyl]-2,6-diphenylpyrimidine-5-carbonitrile (PCNTruX) and 4-(4-{10,15-bis[4-(tert-butyl)phenyl]-10,15-dihydro-5H-diindolo[3,2-a:3′,2′-c]carbazol-5-yl}-3-cyanophenyl)-2,6-diphenylpyrimidine-5-carbonitrile (PCNtTruX), were synthesized as sensitizers for TADF-sensitized fluorescent organic light-emitting diodes. The two tTCNTruX and PCNtTruX TADF emitters were designed to have Dexter energy transfer with blocking groups either in the donor or acceptor unit of the donor–acceptor-type TADF sensitizer. The TADF materials showed small singlet–triplet energy splitting and a high reverse intersystem crossing (RISC) rate for effective sensitization of the fluorescent emission of the fluorescent emitter. tTCNTruX- and PCNtTruX-sensitized fluorescent devices showed maximum external quantum efficiencies (EQEs) of 17.7 % and 11.5 % in the yellow and red devices, respectively, which were higher than those of TADF-sensitized devices with the corresponding TADF sensitizer without a blocking group. Moreover, the device lifetime was also extended by employing the tTCNTruX and PCNtTruX sensitizers. This work demonstrated that the tTCNTruX and PCNtTruX sensitizers are effective to improve the maximum EQE and device lifetime of TADF-sensitized fluorescent devices.     

Enhanced Performance of Organic/Inorganic Hybrid Nanomaterials bearing Impregnated [PdL2] Complexes as Counter‐Electrode Catalyst for Dye‐Sensitized Solar Cells

N‐coordinate Pd²⁺ complexes [PdL₂] (L: N‐N‐quinoline‐8‐yl‐R‐benzenesulfonamides) ( 6–10 ) and [PdL₂] complexes assembled on multi‐wall carbon nanotubes (MWCNTs) hybrid nanomaterials were fabricated and characterized by various techniques. The [PdL₂] impregnated MWCNTs materials ( 11–15 ) were applied as a counter electrode (CE) catalyst for triiodide to iodide reduction reaction in the dye‐sensitized solar cells (DSSC) and investigated electro‐catalytic activities. The MWCNTs‐supported [PdL₂] CEs ( 11–15 ) are exhibits as Pt‐free CE with good power conversion efficiencies (PCEs), and compared to platinum and bare MWCNTs CEs and the PCE of bare MWCNTs was clearly improved by means of [PdL₂] complexes ( 6–10 ). The DSSCs based on the hybrid counter electrodes (CEs) ( 11–15 ) and bare MWCNTs are indicated a relative efficiency ( ? _rel ) of 64.27%, 54.07%, 53.75%, 51.52% 44.82% and 27.27% concerning a Pt CE control device set at 100%. The report emphasizes that [PdL₂] impregnated MWCNTs type counter electrodes (CEs) ( 11–15 ) are promising as effectively catalyst in working device design, particularly taking into account the eco‐friendly approach of the hybrids.     

Novel Conjugated Side Chain Fluorinated Polymers Based on Fluorene for Light-Emitting and Ternary Flash Memory Devices

Three novel conjugated polymers based on 9,9′-dioctylfluorene unit and isoindolo[2,1-a]benzimidazol-11-one with different fluorine substituents (0, 2 and 4) were synthesized. PLED and resistive memory devices based on these polymers were prepared consequently. PLED based on four-fluorinated polymer showed the highest maximum brightness of 3192 cd m⁻² with almost 5-fold increase of current efficiency 8-fold increase of external quantum efficiency compared to that of the other two, and all the PLEDs exhibited good emission stability with no noticeable change of electroluminescence even under high voltage of 10 V. The memory device of doubly-fluorinated polymer exhibited ternary flash behavior with threshold voltages below −2.5 V, while device of four-fluorinated polymer possessed ON/OFF current ratio above 10⁴. Impact of fluorine substitutions on the performance of devices were briefly investigated. The results revealed that the improvement of device performance might not scale with the increasing number of fluorine substitutions, and the four-fluorine-substituted polymer and doubly-fluorinated polymer could be encouraging materials for applications of PLED and resistive memory device and worth of further design of other new polymer systems.     

Benzo[c]thiophene–C60 Diadduct: An Electron Acceptor for p–n Junction Organic Solar Cells Harvesting Visible to Near‐IR Light

We synthesized a new 56‐π‐electron fullerene derivative through a Diels–Alder cycloaddition of benzo[c]thiophene that featured a relatively low temperature, closer to stoichiometric use of the diene, and easy product purification. The 56‐π‐electron benzo[c]thiophene diadduct ( BTCDA ) has a LUMO energy level of 0.09 to 0.18 eV higher than that of 58‐π‐electron fullerenes, and therefore, the BTCDA ‐based organic photovoltaic device exhibited a higher open‐circuit voltage and power‐conversion efficiency (PCE). When used with a binary‐donor system, including visible‐light‐harvesting tetrabenzoporphyrin ( BP ) and near‐IR‐harvesting titanyl phthalocyanine ( TiOPc ), the device had a PCE that was 1.5–3 times higher (2.8 %) than that for devices with BP or TiOPc alone because the binary‐donor device can utilize light between λ=350 and 950 nm.     

Molecular Engineering of Isomeric Benzofurocarbazole Donors for Photophysical Management of Thermally Activated Delayed Fluorescence Emitters

Benzofurocarbazole moieties are commonly used donor structures in the design of thermally activated delayed fluorescence (TADF) emitters. However, only 5 H-benzofuro[3,2-c]carbazole (34BFCz) has been reported and, to the best of our knowledge, no other benzofurocarbazole derivatives have been covered in the literature. In the present study, two further benzofurocarbazole moieties, 12 H-benzofuro[3,2-a]carbazole (12BFCz) and 7 H-benzofuro[2,3-b]carbazole (23BFCz), have been synthesized to investigate the effect of the donor structure on the photophysics and device parameters of TADF emitters. Two benzofurocarbazole-derived TADF emitters, 12-(2-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-12 H-benzofuro[3,2-a]carbazole (o12BFCzTrz) and 7-(2-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-7 H-benzofuro[2,3-b]carbazole (o23BFCzTrz), have been compared with 5-(2-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-5 H-benzofuro[3,2-c]carbazole (oBFCzTrz). The benzofurocarbazole donor structure governs the TADF characteristics, such as charge-transfer property and emission color. The 12BFCz donor has proved to be effective in blue-shifting the emission color, and 34BFCz has proven useful for improving the external quantum efficiency (EQE). The 12BFCz-derived o12BFCzTrz showed blue-shifted color coordinates of (0.159, 0.288), compared to (0.178, 0388) for o23BFCzTrz and (0.169, 0.341) for oBFCzTrz. The 34BFCz-derived oBFCzTrz exhibited an EQE of 22.9 %, compared to 19.2 % for o12BFCzTrz and 21.1 % for o23BFCzTrz.     

The effect of photocrosslinkable groups on thermal stability of bulk heterojunction solar cells based on donor–acceptor‐conjugated polymers

Three different types of photocrosslinkable groups into a low band‐gap donor–acceptor‐conjugated polymer, namely poly{benzo[1,2‐b:4,5‐b′]dithiophene‐alt‐ thieno[3,4‐b]thiophene} (PBT), were developed to comparatively investigate the effect of the photocrosslinkable groups on the thermal stability of bulk heterojunction solar cells. Compared with vinyl groups, bromine‐ and azide‐ photocrosslinkable groups are more prompt for photocrosslinking to yield a denser crosslinking network, probably due to the different crosslinking mechanisms and reaction rates. In contrast to the reference device decreasing to less than 10% of its initial efficiency value after 80 h of annealing at 150 °C, a great improvement in the thermal stability of performance of all these crosslinked functional copolymers devices demonstrates that photocrosslinking can effectively improve the thermal stability of the active layer by suppressing [6,6]‐phenyl‐C₆₁‐butyric acid methyl diffusion and phase separation. Furthermore, the solar cells with crosslinked bromine‐ and azide‐functionalized PBT polymers showed very thermally stable photovoltaic device performance by retaining 78 and 66% of their initial device efficiency, respectively, whereas vinyl‐functionalized PBT devices retained only 51% of its initial value after long‐time thermal annealing. This suggests that an appropriate crosslinking network with homogenous active morphology could dramatically enhance the device stability without sacrificing the performance. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4156–4166     

Triggering Thermally Activated Delayed Fluorescence by Managing the Heteroatom in Donor Scaffolds: Intriguing Photophysical and Electroluminescence Properties

Establishment of the structure–property relationships of thermally activated delayed fluorescence (TADF) materials has become a significant quest for the scientific community. Herein, two new donors, 10H‐benzofuro[3,2‐b]indole (BFI) and 10H‐benzo[4,5]thieno[3,2‐b]indole (BTI), have been developed and integrated with a aryltriazine acceptor to design the green TADF emitters benzofuro[3,2‐b]indol‐10‐yl)‐5‐(4,6‐diphenyl‐1,3,5‐triazin‐2‐yl)benzonitrile ( BFICNTrz ) and 2‐(10H‐benzo[4,5]thieno[3,2‐b]indol‐10‐yl)‐5‐(4,6‐diphenyl‐1,3,5‐triazin‐2‐yl)benzonitrile ( BTICNTrz ), respectively. The physicochemical and electroluminescence properties of the compounds were tuned by exchanging the heteroatom in the donor scaffold. Intriguingly, the electronegativity of the heteroatom and the ionization potential of the donor unit played vital roles in control of the singlet–triplet energy splitting and TADF mechanism of the compounds. Both compounds showed similar singlet excited states that originated from the charge transfer (CT) states (¹CT), whereas the triplet excited states were tuned by the heteroatom in the donor unit. The origin of phosphorescence in the BTICNTrz emitter was CT emission from the triplet state (³CT), whereas that in the BFICNTrz emitter stemmed from the local triplet excited state (³LE). Consequently, BTICNTrz showed a small singlet–triplet energy splitting of 0.08 eV, compared with 0.26 eV for BFICNTrz . Thus, BTICNTrz showed efficient delayed fluorescence with a high quantum yield and a short delayed exciton lifetime, whereas BFICNTrz displayed weak delayed fluorescence with a relatively long lifetime. Furthermore, a BTICNTrz ‐based device exhibited a maximum external quantum efficiency (EQE) of 15.2 % and reduced efficiency roll‐off (12 %) compared with its BFICNTrz ‐based counterpart, which showed a maximum EQE of 6.4 % and severe efficiency roll‐off (55 %) at a practical brightness range of 1000 cd m^?2. These results demonstrate that the choice of subunit plays a vital role in the design of efficient TADF emitters.     

Deep‐blue light‐emitting polyfluorenes with asymmetrical naphthylthio‐fluorene as Chromophores

A novel blue polycyclic aromatic compound 2,8‐dibromo‐14,14‐dioctyl‐14H‐benzo[b]benzo [5,6] fluoreno[1,2‐d]thiophene 9,9‐dioxide (Br₂NFSO) is designed and synthesized through multistep synthesis, and its structure is confirmed by nuclear magnetic resonance. Based on synthesized polycyclic aromatic compound Br₂NFSO, a series of twisted blue light‐emitting polyfluorenes derivatives (PNFSOs) are prepared by one‐pot Suzuki polycondensation. Based on the twisted polymer molecular structure resulted from the asymmetric links of 14,14‐dioctyl‐14H‐benzo[b]benzo[5,6]fluoreno[1,2‐d]thiophene 9,9‐dioxide (NFSO) unit in copolymers and better electron transport ability of NFSO than those of the electron‐deficient dibenzothiophene‐S,S‐dioxide counterpart, the resulting polymers exhibit excellent electroluminescent spectra stability in the current densities from 100 to 800 mA cm^?2, and show blue‐shifted and narrowed electroluminescent spectra with the Commission Internationale de L′Eclairage (CIE) of (0.16, 0.07) for PNFSO5, compared to poly(9,9‐dioctylfluorene) (PFO) with the CIE of (0.18, 0.18). Moreover, the superior device performance is achieved based on PNFSO5 with the maximum luminous efficiency (LE_max) of 1.96 cd A^?1, compared with the LE_max of 0.49 cd A^?1 for PFO. The results indicate that the twisted polycyclic aromatic structure design strategy has a great potential to tuning blue emission spectrum and improving EL efficiency of blue light‐emitting polyfluorenes. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 171–182     

Naphtho[2,1‐b:3,4‐b′]dithiophene‐based Bulk Heterojunction Solar Cells: How Molecular Structure Influences Nanoscale Morphology and Photovoltaic Properties

Organic bulk heterojunction photovoltaic devices based on a series of three naphtho[2,1‐b:3,4‐b′]dithiophene (NDT) derivatives blended with phenyl‐C₇₁‐butyric acid methyl ester were studied. These three derivatives, which have NDT units with various thiophene‐chain lengths, were employed as the donor polymers. The influence of their molecular structures on the correlation between their solar‐cell performances and their degree of crystallization was assessed. The grazing‐incidence angle X‐ray diffraction and atomic force microscopy results showed that the three derivatives exhibit three distinct nanoscale morphologies. We correlated these morphologies with the device physics by determining the J–V characteristics and the hole and electron mobilities of the devices. On the basis of our results, we propose new rules for the design of future generations of NDT‐based polymers for use in bulk heterojunction solar cells.     

Organic electroluminescent device with an aromatic amine-containing polymer as a hole transport layer (I): Poly[N-[p-N′ -phenyl-N′-[1,1′-biphenyl-4′-[N″-phenyl-N″-(2-methylphenyl)amino]-4-amino]]phenyl methacrylamide]

Electroluminescent devices were fabricated using a holetransporting polymer, poly[N-[p-N′ -phenyl-N′-[1,1′-biphenyl-4′-[N″-phenyl-N″-(2-methylphenyl)amino]-4-amino]]phenyl methacrylamide] (PTPDMA), and tris(8-quinolinolato)aluminum(III) complex, Alq, as the hole transport layer and the emitter layer, respectively. A device structure of glass substrate/indium–tin–oxide/PTPDMA/Alq/Mg:Ag was employed. Hole injection from the electrode through the PTPDMA layer to the Alq layer and concomitant electroluminescence from the Alq layer were observed. Bright green luminescence with a luminance of 20,000 cd/m² was obtained at a drive voltage of 14 V.     

Medium-Ring Strategy Enables Multiple Resonance Emitters with Twisted Geometry and Fast Spin-Flip to Suppress Efficiency Roll-Off

Suppressing aggregation-caused quenching (ACQ) effect and reducing device efficiency roll-off are both crucial yet challenging for multi-resonance (MR) emitters. Herein, we put forward a medium-ring strategy to design efficient MR emitters that feature heptagonal tribenzo[b,d,f]azepine (TBA) donors. The highly twisted conformation enlarges the intermolecular distances between the MR-emitting cores, and thus suppresses ACQ effect. Meanwhile, the introduction of heptagonal donors enhances spin-orbital coupling, so as to accelerate reverse intersystem crossing (RISC) process. This medium-ring strategy gives rise to the first example of blue MR emitter that simultaneously possesses radiative decay rate as fast as 10⁸ s⁻¹ and RISC rate as fast as 10⁶ s⁻¹. Accordingly, DTBA-B2N3 enables to assemble high-performance blue organic light-emitting diodes (OLEDs) with maximum external quantum efficiency (EQE_max) of 30.9 % and alleviated efficiency roll-off (EQE₁₀₀₀: 20.5 %).     

Performance Enhancement of Bulk Heterojunction Solar Cells with Direct Growth of CdS‐Cluster‐Decorated Graphene Nanosheets

Two‐dimensional graphene–CdS (G–CdS) semiconductor hybrid nanosheets were synthesized in situ by graphene oxide (GO) quantum wells and a metal–xanthate precursor through a one‐step growth process. Incorporation of G–CdS nanosheets into a photoactive film consisting of poly[4,8‐bis‐(2‐ethyl‐hexyl‐thiophene‐5‐yl)‐benzo[1,2‐b:4,5‐b]dithiophene‐2,6‐diyl]‐alt‐[2‐(2‐ethyl‐hexanoyl)‐thieno[3,4‐b]thiophen‐4,6‐diyl] (PBDTTT‐C‐T) and [6,6]‐phenyl C₇₀ butyric acid methyl ester (PC₇₀BM) effectively decreases the exciton lifetime to accelerate exciton dissociation. More importantly, the decreasing energy levels of PBDTTT‐C‐T, PC₇₀BM, and G–CdS produces versatile heterojunction interfaces of PBDTTT‐C‐T:PC₇₀BM, PBDTTT‐C‐T:G–CdS, and PBDTTT‐C‐T:PC₇₀BM:G–CdS; this offers multi‐charge‐transfer channels for more efficient charge separation and transfer. The charge transfer in the blend film also depends on the G–CdS nanosheet loadings. In addition, G–CdS nanosheets improve light utilization and charge mobility in the photoactive layer. As a result, by incorporation of G–CdS nanosheets into the active layer, the power‐conversion efficiency of inverted solar cells based on PBDTTT‐C‐T and PC₇₁BM is improved from 6.0 % for a reference device without G–CdS nanosheets to 7.5 % for the device with 1.5wt % G–CdS nanosheets, due to the dramatically enhanced short‐circuit current. Combined with the advantageous mechanical properties of the PBDTTT‐C‐T:PC₇₀BM:G–CdS active layer, the novel CdS‐cluster‐decorated graphene hybrid nanomaterials provide a promising approach to improve the device performance.     

Electrical bistability of organic devices with a polymeric thin film for nonvolatile data storage

In this study, organic memory devices with a single active layer between the two external electrodes were fabricated using an electron‐donor type conjugated polymer and an electron‐acceptor type small organic molecule. The active layer of the memory device was prepared by blending polystyrene, poly[10‐(2′‐ethylhexyl)phenothiazine‐3,7‐diyl], and tetracyanoquinodimethane in 1,2‐dichlorobenzene. The device initially showed a low‐conductance state (OFF state) in the low‐voltage range, and an abrupt current increase, corresponding to the transition to a high‐conductance state (ON state), occurred at a certain voltage (V_th). The ON state could be reverted to the OFF state by applying a voltage higher than V_th. The current ratio between the two states was about 10³ (up to 10⁵). After this transition, the device remained in the ON state even after the applied voltage was removed, and this indicated the nonvolatile characteristics of the device. There was no sharp current degradation in the OFF or ON states for 4500 s of continuous bias. The device‐to‐device performance fluctuation was measured, and the conduction mechanisms in the ON and OFF states were examined by fitting the data to well‐known theoretical models. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Realizing fast photoinduced recovery with polyfluorene-block-poly(vinylphenyl oxadiazole) block copolymers as electret in photonic transistor memory devices

Photonic field-effect transistor (FET) memory devices offer unique advantages owing to their solution processability, low cost production, and their lightweight and structural flexibility. Despite the plethora of research demonstrated the photon based programming process, limited reports are available for photoinduced recovery mechanism in such devices. To investigate the influence of polymer electret design on photonic memory performance, poly(9,9-dioctylfluorene) (PFO)–block–poly (vinylphenyl oxadiazole) (POXD) conjugated block copolymers were employed to a photonic FET memory with n-type semiconducting channel. The studied device exhibited bistable ON/OFF current states after electrical programming and photoinduced recovery (erasing) processes. The device operating mechanism was elaborated by comparing the device performance with respective electrets of PFO-b-POXD and PFO-b-polystyrene (PS) and PFO homopolymer. We found that PFO-b-POXD can efficiently generate photoexciton under UV illumination to neutralize the trapped hole, and assuage the hole trapping propensity of PFO segment, simultaneously. By optimizing the POXD content in the block copolymer, a decent memory ratio (I_ON/I_OFF) of ~10⁵ was achieved after 10⁴ s, indicating its superior long-term stability and data discernibility. This research shows the judicious strategy to design polymer electret for photonic memory, and it opens up the possibility of developing photonic memory, human perception and futuristic communication systems using simple, convenient and reliable optoelectronic technique.     

Polymer Light-emitting Diodes Based on End-capped Poly[9,9-di-(2'-ethylhexyl)fluorenyl-2,7-diyl]

We demonstrate polymer light‐emitting diodes (LEDs) based on poly[9,9‐di‐(2′‐ethylhexyl)fluorenyl‐2,7‐diyl] with end capper dimethylphenyl or N,N‐bis(4‐methylphenyl)‐N‐phenylamine. The introduction of end‐capper groups increased the device luminance and efficiency, while greatly depressing the green emission. For the devices constructed of poly[9,9‐di‐(2′‐ethylhexyl)fluorenyl‐2,7‐diyl] end capped with dimethylphenyl, the maximum luminance reached 381 cd/m² at 122 mA/cm². The maximum external quantum efficiency was 0.16% at 117 mA/cm², which is more than five times higher than that of the non‐end‐capped polymer LEDs. The electroluminescence (EL) maximum was at 485 nm, blue shifted by 52 nm with respect to that of the non‐end‐capped polyfluorene devices. It is proposed that efficient hole trapping at end capper and increased resistance of polyfluorene to oxidation are responsible for the improved device performance and color stability.     

Synthesis,Physical Properties and Memory Device Application of a Twelve‐Ring Fused Twistheteroacene

Developing new organic conjugated materials for high density memory devices is highly desirable. In this research, a novel donor–acceptor‐type twelve‐ring fused twistheteroacene, 2,7,19,24‐tetra‐tert ‐butyl‐13,30‐didodecyl‐9,17,26,34‐tetraphenyl benzo[8′,9′]triphenyleno[2′,3′:7,8]dibenzo[b,e][1,4]dioxino[1,2,3,4‐lmn]dibenzo[6′,7′:10′,11′]tetraceno[2′,3′:5,6][1,4]dioxino[2,3‐f][3,8]phenanthroline‐12,14,29,31(13H ,30H )‐tetraone ( DPyN ) has been synthesized and characterized. It displays high thermal stability, possesses a broad absorption band centered at 510 and 538 nm, and emits red fluorescence in organic solvents. A solution‐processed memory device with DPyN as an active element shows an excellent memory performance with an ON/OFF current ratio of 10^3.46:1 and a threshold voltage of −2.44 V.     

Thermally stable organic electroluminescent device using novel amorphous molecular charge-transport materials, 4,4′,4“-tris[bis(4′-tert-butyl-biphenyl-4-yl)amino]triphenylamine and 4,4,4“-tri(n-carbazolyl)triphenylamine

For the purpose of developing an amorphous molecular material with a high glass-transition temperature (Tg) and a low ionization potential for use as a charge-transport layer in organic electroluminescent (EL) devices, a novel starburst molecule, 4,4′,4“-tris[bis(4′-tert-butylbiphenyl-4-yl)amino]triphenylamine (t-Bu-TBATA), was designed and synthesized. t-Bu-TBATA was found to form readily a stable glass with a Tg of 203 °C. A multilayer EL device consisting of double hole-transport layers of t-Bu-TBATA and 4,4′,4“-tri(N-carbazolyl)triphenylamine and an emitting layer of tris(8-quinolinolato)aluminum was fabricated and its performances were examined. The device was found to exhibit good performances and to be thermally stable, operating even at 170 °C.     

A Fullerene‐Substituted Pillar[5]arene for the Construction of a Photoactive Rotaxane

Transformation of a methylene group of the pillar[5]arene scaffold into a ketone has been achieved by treatment with N‐bromosuccinimide followed by hydrolysis of the bromide intermediate and oxidation of the resulting secondary benzylic alcohol with BaMnO₄. Condensation of the resulting macrocycle including a ketone function with p‐toluenesulfonyl hydrazide followed by reaction of the corresponding tosylhydrazone with C₆₀ under modified Bamford–Stevens conditions gave a fulleropillar[5]arene derivative. This building block has been used to prepare a rotaxane. The resulting molecule combining the fullerene‐functionalized macrocycle with an axle bearing a porphyrin stopper is a photoactive molecular device in which the porphyrin emission is efficiently quenched by the fullerene moiety.     

Modulating the Electron-Donating Ability of Acridine Donor Units for Orange–Red Thermally Activated Delayed Fluorescence Emitters

The development of thermally activated delayed fluorescence (TADF) emitters with orange–red emission still lags behind that of their blue, green, and yellow counterparts. Recent research to address this problem mainly focused on developing new acceptor units. There were few donor units designed especially for orange–red emitters. Herein, with benzothiophene fused to a diphenylacridine donor unit, a new donor moiety, namely, 5,5-diphenyl-5,13-dihydrobenzo[4,5]thieno[3,2-c]acridine (BTDPAc), was designed and synthesized. Benefiting from the strong electron-donating ability of the new donor moiety, a new TADF emitter, 2-[4′-(tert-butyl)(1,1′-biphenyl)-4-yl]-6-[5,5-diphenylbenzo[4,5]thieno[3,2-c]acridin-13(5H)-yl]-1H-benzo[de]isoquinoline-1,3(2H)-dione (BTDPAc-PhNAI), shows an orange–red emission with a maximum at 610 nm in dilute toluene solution. Also, with the help of the diphenyl rings of the donor unit, high photoluminescence quantum yields were achieved for BTDPAc-PhNAI over a wide concentration range. Consequently, an orange–red organic light-emitting diode based on BTDPAc-PhNAI achieved a high external quantum efficiency of nearly 20 %, which was comparable to state-of-the-art device performances with similar emission spectra.