弹性梁式薄板在横向绕流中的大变形

采用相容拉格朗日-欧拉(ULE)法,给出了弹性薄板理想流体横向绕流条件下变形与应力的理论算法,其中:对固体采用拉格朗日法;对流体采用欧拉法;对相互接触面采用拉格朗日法和欧拉法.建立了不问断横向绕流条件下弹性梁式薄板的大弯曲变形的非线性微分方程.求解该方程时,将纵向位移分量和曲率的改变量用挠度表示.通过具体算例分析了各参数对悬臂梁式薄板挠度、纵向位移及应力大小的影响.理论解与数值解进行比较,验证了理论解的可靠性.     

梯度弹性基础上正交异性薄板的弯曲

基于能量法和变分原理,采用双参数弹性基础模型,研究了梯度弹性基础上正交异性薄板在分布载荷作用下的弯曲问题。首先,根据能量法与变分原理,给出了梯度弹性基础上正交异性薄板的弯曲微分平衡方程,并得到了梯度弹性基础刚度系数 与 的计算表达式;进而,假设 向正应力在厚度方向上均匀分布,推导了弹性基础 向位移衰减函数 的计算式。在算例中,通过将梯度弹性基础退化为均质基础,并与Vlazov模型对比,证明了本文理论的正确性;最后,求解了弹性模量呈幂律分布的梯度基础上薄板的挠度分布,分析了基础上下表层材料弹性模量比 与体积分数指数 对薄板挠度分布的影响。     

开孔粘弹性薄板的非线性数学模型

应力函数的多值性和位移单值性要求，是开孔薄板大挠度问题中必须注意的两个方面。本文利用线粘性力学中的Ｂｏｌｔｚｍａｎｎ蠕变律，把开孔弹性薄板大挠度问题的一般数学理论推广到开孔弹性薄板。在考察应力函数的多值性和位移单值性条件的基础上，提出了开孔粘弹性薄板的控制方程和初、边值条件，系统地建立了开也粘弹性薄板非线性分析的三类初一边值问题。     

轴对称von Korman位移型方程的打靶法求解

本文采用常微分方程两点边值问题的打靶法，建立了圆薄板轴对称大挠度弯曲ｖｏｎＫáｒｍáｎ位移型方程的自动求解过程．作为例子，分析了圆薄板在均布横向截荷作用下的非线性弯曲问题，给出了载荷参数大范围变化的解曲线     

轴对称von Korman位移型方程的打靶法求解

本文采用常微分方程两点边值问题的打靶法，建立了圆薄板轴对称大挠度弯曲ｖｏｎＫáｒｍáｎ位移型方程的自动求解过程．作为例子，分析了圆薄板在均布横向截荷作用下的非线性弯曲问题，给出了载荷参数大范围变化的解曲线     

横观各向同性弹性半空间地基上四边自由各向异性矩形薄板弯曲解析解

选用更具广泛性的横观各向同性弹性半空间地基模型,来分析四边自由各向异性矩形地基板的弯曲解析解．将异性薄板的弯曲控制方程,与基于横观各向同性弹性半空间地基位移解建立的板与地基变形协调方程相结合,先按对称性分解,然后用三角级数法,得出横观各向同性弹性半空间地基上四边自由各向异性矩形薄板的弯曲解析解,包括地基反力、板的挠度及内力的解析表达式．该解析解克服了数值法的弊端,取消了对地基反力的假设,板的内力及地基反力求解更切实际．算例结果与文献结果吻合良好,证明本文方法的可行性．     

薄板小挠度问题刚度随机时的随机解析分析

将二维随机场视为可分空间，对薄板小挠度问题进行随机分析，给出当薄板刚度随机时板上各点位移数字特征的解析解．为薄板小挠度问题的随机分析提供了准确解，也可用于检验其它各种近似分析方法的准确程度．最后以四边简支薄板为例，对其位移的统计特性进行了计算．     

周边嵌入弹性圆薄板非线性自由振动直接摄动解法

采用弹性圆薄板中心无量纲振幅和板厚与半径的比值为参数。将挠度、应力函数对半径的导数以及自由振动频率展开为双参数的幂级数。用直接摄动法获得各级递推线性偏微分方程。应用变分法求得各级递推方程的近似解，从而给出弹性圆薄板非线性自由振动频率的基本公式。     

弹性圆板的热过屈曲

基于精确的圆薄板轴对称大挠度变形几何方程，建立了均匀加热圆板轴对称热弹性屈曲问题位移形式的控制方程，采用打靶法和解析延拓法获得了连续依赖于温度载荷的圆板过屈曲状态解，给出了相应的数值结果。     

桁架板等效刚度分析

桁架材料的连续介质等效模型的研究已有相当基础,而工程中桁架材料往往以类板结构形式出现,其变形表现出明显的弯曲特征。将类板桁架材料采用弯曲板模型模拟,研究合理的方法确定等效板模型的刚度具有重要意义。本文在基于Kirchhoff假定的小挠度薄板弹性理论框架下,研究了类板桁架材料的等效弯曲薄板模型,提出了确定薄板模型等效刚度的基于Dirichlet位移边界条件的代表体元法,给出了确定各刚度系数所对应的代表体元的边界位移形式。具体计算了几种典型形式桁架板的等效刚度,并采用有限元离散模型和实验技术分析了桁架板在一定的边界约束和荷载作用下的响应,并与等效板模型的分析结果进行了对比。结果表明,在响应分析中,具有等效刚度的薄板模型可准确模拟类板桁架材料;连续介质板等效刚度计算的积分法不能给出准确的桁架板等效刚度,而基于Dirichlet位移边界条件的代表体元法获得的等效板的刚度具有很高的精度。     

含基体横向损伤的黏弹性板的蠕变后屈曲分析

基于Schapery三维黏弹性损伤本构关系,引入沈为和Kachanov损伤演化方程,建立了基体横向损伤的纤维单一方向铺设黏弹性板的损伤模型;应用von Karman板理论,导出了考虑损伤效应的具初始挠度的纤维单一方向铺设黏弹性矩形板的非线性压屈平衡方程. 对未知变量在空间上采用差分法离散,时间上采用增量算法和Newton-Cotes积分法离散,控制方程被迭代求解. 算例中讨论了损伤以及有关参数对黏弹性复合材料板后屈曲行为的影响,且与已有文献的结果进行了比较. 数值结果表明：随着外载荷或者初始挠度的增大,板后屈曲趋于稳定时的挠度就愈大,损伤的影响愈明显;而随着长宽比的增大,板后屈曲趋于稳定时的挠度愈小,损伤的影响却随之增大.     

粘弹性大挠度圆板的轴对称弯曲

本文探讨粘弹性大挠度圆板的轴对称弯曲的基本方程和求解方法.用半逆解和摄动法分析挠度与膜力,对标准线性固体进行数例计算,并与小挠度理论相比较.全部方程与解答可退化得相应的弹性大挠度板的结果.     

Stiffness and Damping Identification from Full Field Measurements on Vibrating Plates

The paper presents an experimental application of a method leading to the identification of the elastic and damping material properties of isotropic vibrating plates. The theory assumes that the searched parameters can be extracted from curvature and deflection fields measured on the whole surface of the plate at two particular instants of the vibrating motion. The experimental application consists in an original excitation fixture, a particular adaptation of an optical full-field measurement technique, a data preprocessing giving the curvature and deflection fields and finally in the identification process using the Virtual Fields Method (VFM). The principle of the deflectometry technique used for the measurements is presented. First results of identification on an acrylic plate are presented and compared to reference values. Results are discussed and improvements of the method are proposed.     

On new symplectic superposition method for exact bending solutions of rectangular cantilever thin plates

A novel superposition method based on the symplectic geometry approach is presented for exact bending analysis of rectangular cantilever thin plates. The basic equations for rectangular thin plate are first transferred into Hamilton canonical equations. By the symplectic geometry method, the analytic solutions to some problems for plates with slidingly supported edges are derived. Then the exact bending solutions of rectangular cantilever thin plates are obtained using the method of superposition. The symplectic superposition method developed in this paper is completely rational compared with the conventional analytical ones because the predetermination of deflection functions, which is indispensable in existing methods, is dispelled.     

Large deflection of a rectangular magnetoelectroelastic thin plate

Based on the von Karman plate theory of large deflection, we derive the nonlinear partial differential equation for a rectangular magnetoelectroelastic thin plate under the action of a transverse static mechanical load. By employing the Bubnov-Galerkin method, the nonlinear partial differential equation is transformed to a third-order nonlinear algebraic equation for the maximum deflection where a coupling factor is introduced for determining the coupling effect on the deflection. Numerical results are carried out for the thin plate made of piezoelectric BaTiO₃ and piezomagnetic CoFe₂O₄ materials. Some interesting results are obtained which could be useful to future analysis and design of multiphase composite plates.     

Bending of orthotropic plates resting on Pasternak’s foundations using mixed shear deformation theory

The mixed first-order shear deformation plate theory(MFPT) is employed to study the bending response of simply-supported orthotropic plates.The present plate is subjected to a mechanical load and resting on Pasternak’s model or Winkler’s model of elastic foundation or without any elastic foundation.Several examples are presented to verify the accuracy of the present theory.Numerical results for deflection and stresses are presented.The proposed MFPT is shown simplely to implement and capable of giving satisfactory results for shear deformable plates under static loads and resting on two-parameter elastic foundation.The results presented here show that the characteristics of deflection and stresses are significantly influenced by the elastic foundation stiffness,plate aspect ratio and side-to-thickness ratio.     

Nonlinear bending behavior of orthotropic Mindlin plate resting on orthotropic Pasternak foundation using GDQM

Rectangular plates resting on elastic foundations are operational activities of large transportation aircraft on runways, footings, foundation of spillway dam, civil building in cold regions, and bridge structures. Hence, in the present work, nonlinear bending analysis of embedded rectangular plates is investigated based on orthotropic Mindlin plate theory. The elastic medium is simulated by orthotropic Pasternak foundation. Adopting the nonlinear strain–displacement relation, the governing equations are derived based on energy method and Hamilton’s principle. The generalized differential quadrature method is performed for the case when all four ends are clamped supported. The influences of the plate thickness, shear-locking, elastic medium constants, and applied force on the nonlinear bending of the rectangular plate are studied. Results indicate that increasing the plate thickness decreases the deflection of the plate. It is also observed that increasing the applied force increases the deflection of the plate. Furthermore, considering elastic medium decreases deflection of the plate, and the effect of the Pasternak-type is higher than the Winkler-type on the maximum deflection of the plate. Also, it is found that the present results have good agreement with previous researches.     

On bending of strain gradient elastic micro-plates

Bending of strain gradient elastic thin plates is studied, adopting Kirchhoff’s theory of plates. Simple linear strain gradient elastic theory with surface energy is employed. The governing plate equation with its boundary conditions are derived through a variational method. It turns out that new terms are introduced, indicating the importance of the cross-section area in bending of thin plates. Those terms are missing from the existing strain gradient plate theories; however, they strongly increase the stiffness of the thin plate.     

Large deflection analysis of plates on elastic foundation by the boundary element method

A boundary element method is developed for the large deflection analysis of thin elastic plates resting on elastic foundation. The subgrade reaction may depend linearly (Winkler-type) or nonlinearly on the deflection as well as on the point coordinates (nonhomogeneous subgrade). Moderately large deflections are examined as described by the von Karman equations. The plate may have arbitrary shape and its boundary may be subjected to any type of boundary condition. The proposed method uses the fundamental solution of the linear plate theory and treats the nonlinearities as well as the subgrade reaction as unknown domain forces. Numerical results are presented to illustrate the method and demonstrate its effectiveness and accuracy.