Effect of particle size on the kinetics of the electrocatalytic oxygen reduction reaction catalyzed by Pt dendrimer-encapsulated nanoparticles

Platinum dendrimer-encapsulated nanoparticles (DENs) containing an average of 55, 100, 147, 200, and 240 atoms were prepared within sixth-generation, hydroxyl-terminated, poly(amidoamine) dendrimers. These DENs were immobilized on glassy carbon electrodes, and the effect of particle size on the kinetics of the oxygen reduction reaction (ORR) was quantitatively evaluated using rotating disk voltammetry. The total areas of the Pt DENs were determined by electrochemical CO stripping and hydrogen desorption, and the results were found to be in reasonable agreement with calculated values. The largest particles exhibited the highest specific activities for the ORR.     

In situ structural characterization of platinum dendrimer-encapsulated oxygen reduction electrocatalysts

In situ electrochemical extended X-ray absorption fine structure (EXAFS) was used to evaluate the structure of Pt dendrimer-encapsulated nanoparticles (DENs) during the oxygen reduction reaction (ORR). The DENs contained an average of just 225 atoms each. The results indicate that the Pt coordination number (CN) decreases when the electrode potential is moved to positive values. The results are interpreted in terms of an ordered core, disordered shell model. The structure of the DENs is not significantly impacted by the presence of dioxygen, but other electrogenerated species may have a significant impact on nanoparticle structure.     

Site-selective Cu deposition on Pt dendrimer-encapsulated nanoparticles: correlation of theory and experiment

The voltammetry of Cu underpotential deposition (UPD) onto Pt dendrimer-encapsulated nanoparticles (DENs) containing an average of 147 Pt atoms (Pt(147)) is correlated to density functional theory (DFT) calculations. Specifically, the voltammetric peak positions are in good agreement with the calculated energies for Cu deposition and stripping on the Pt(100) and Pt(111) facets of the DENs. Partial Cu shells on Pt(147) are more stable on the Pt(100) facets, compared to the Pt(111) facets, and therefore, Cu UPD occurs on the 4-fold hollow sites of Pt(100) first. Finally, the structures of Pt DENs having full and partial monolayers of Cu were characterized in situ by X-ray absorption spectroscopy (XAS). The results of XAS studies are also in good agreement with the DFT-optimized models.     

Synthesis, characterization, and surface immobilization of platinum and palladium nanoparticles encapsulated within amine-terminated poly(amidoamine) dendrimers

Platinum and palladium dendrimer-encapsulated nanoparticles (DENs) were prepared within commercially available, fourth-generation, amine-terminated, poly(amidoamine) dendrimers (G4-NH2). The synthesis is carried out by selectively encapsulating metal complexes within the dendrimer and then reducing the resulting composite. Intradendrimer complexation requires control over the solution pH to prevent attachment of the metal complexes to primary amine groups on the dendrimer periphery. That is, the surface primary amines of the dendrimer must be selectively protonated in the presence of the interior tertiary amines. The metal-ion encapsulation and reduction processes were characterized by UV-vis spectroscopy. Forty-atom Pt and Pd DENs were examined by high-resolution transmission electron microscopy, which showed that the mean particle sizes were 1.4 and 1.5 nm, respectively, and that both were nearly monodisperse (standard deviation = 0.3 nm). The free amine groups on the dendrimer surface were used to link Pd DENs to monolithic Au surfaces via an intermediate self-assembled monolayer adhesion layer.     

Characterization of Pt@Cu core@shell dendrimer-encapsulated nanoparticles synthesized by Cu underpotential deposition

Dendrimer-encapsulated nanoparticles (DENs) containing averages of 55, 147, and 225 Pt atoms immobilized on glassy carbon electrodes served as the electroactive surface for the underpotential deposition (UPD) of a Cu monolayer. This results in formation of core@shell (Pt@Cu) DENs. Evidence for this conclusion comes from cyclic voltammetry, which shows that the Pt core DENs catalyze the hydrogen evolution reaction before Cu UPD, but that after Cu UPD this reaction is inhibited. Results obtained by in situ electrochemical X-ray absorption spectroscopy (XAS) confirm this finding.     

Synthesis and Characterization of Dendrimer‐Encapsulated Bimetallic Core‐Shell PdPt Nanoparticles

Using a successive method, PAMAM dendrimer‐encapsulated bimetallic PdPt nanoparticles have been successfully prepared with core‐shell structures (Pd@Pt DENs). Evidenced by UV‐vis spectra, high resolution transmission electron microscopy, and X‐ray energy dispersive spectroscopy (EDS), the obtained Pd@Pt DENs are monodispersed and located inside the cavity of dendrimers, and they show a different structure from monometallic Pt or Pd and alloy PdPt DENs. The core‐shell structure of Pd@Pt DENs is further confirmed by infrared measurements with carbon monoxide (IR‐CO) probe. In order to prepare Pd@Pt DENs, a required Pd/Pt ratio of 1:2 is determined for the Pt shell to cover the Pd core completely. Finally, a mechanism for the formation of Pd@Pt DENs is proposed.     

Biosensor Based on Self‐Assembling Glucose Oxidase and Dendrimer‐Encapsulated Pt Nanoparticles on Carbon Nanotubes for Glucose Detection

A novel amperometric glucose biosensor based on layer‐by‐layer (LbL) electrostatic adsorption of glucose oxidase (GOx) and dendrimer‐encapsulated Pt nanoparticles (Pt‐DENs) on multiwalled carbon nanotubes (CNTs) was described. Anionic GOx was immobilized on the negatively charged CNTs surface by alternatively assembling a cationic Pt‐DENs layer and an anionic GOx layer. Transmission electron microscopy images and ζ‐potentials proved the formation of layer‐by‐layer nanostructures on carboxyl‐functionalized CNTs. LbL technique provided a favorable microenvironment to keep the bioactivity of GOx and prevent enzyme molecule leakage. The excellent electrocatalytic activity of CNTs and Pt‐DENs toward H₂O₂ and special three‐dimensional structure of the enzyme electrode resulted in good characteristics such as a low detection limit of 2.5 μM, a wide linear range of 5 μM–0.65 mM, a short response time (within 5 s), and high sensitivity (30.64 μA mM^?1 cm^?2) and stability (80% remains after 30 days).     

Modification of a glassy carbon surface with amine-terminated dendrimers and its application to electrocatalytic hydrazine oxidation

Amine-terminated polyamidoamine (PAMAM) dendrimers were immobilized on glassy carbon electrodes (GCEs) via electrochemical oxidation of the terminal amine groups of dendrimers. The electrochemical immobilization of dendrimers was confirmed by cyclic voltammetry (CV) and X-ray photoelectron spectroscopy (XPS). The immobilized dendrimer films were robust and behaved as charge-selective electrochemical gates for oppositely charged redox molecules. The immobilization approach was applied to assemble Au dendrimer-encapsulated nanoparticles (Au DENs, dia. 1.5 ± 0.3 nm) on GCEs, and the resulting Au DEN films showed electrocatalytic activity to hydrazine oxidation.     

Tuning supported catalyst reactivity with dendrimer-templated Pt-Cu nanoparticles

The effects of particle composition on heterogeneous catalysis were studied using dendrimer-encapsulated nanoparticles (DENs) as precursors to supported Pt-Cu catalysts. Bimetallic Pt-Cu DENs with varying Pt/Cu ratios were prepared in an anaerobic aqueous solution and deposited onto a high-purity commercial alumina support. The dendrimer template was then thermally removed to yield supported nanoparticle catalysts, which were studied with toluene hydrogenation and CO oxidation catalysis as well as infrared spectroscopy of adsorbed CO. Incorporating Cu into Pt nanoparticles had opposite effects on the two test reactions. Cu acted as a mild promoter for CO oxidation catalysis, and the promoting effect was independent of the amount of Cu present. Conversely, Cu acted as a strong poison for toluene hydrogenation catalysis, and the normalized rate tracked inversely with Cu content. Infrared spectroscopy of the supported nanoparticles indicated that electronic effects (electron donation from Cu to Pt) were minimal for these materials. Consequently, the catalysis results are interpreted in terms of potential structural differences as a function of Cu incorporation and reaction conditions.     

Fabrication of monometallic (Co,Pd, Pt,Au) and bimetallic (Pt/Au,Au/Pt) thin films with hierarchical architectures as electrocatalysts

Co thin films with novel hierarchical structures were controllably fabricated by simple electrochemical deposition in the absence of hard and soft templates, which were used as sacrificial templates to further prepare noble metal (Pd, Pt, Au) hierarchical micro/nanostructures via metal exchange reactions. SEM characterization demonstrated that the resulting noble metal thin films displayed hierarchical architectures. The as-prepared noble metal thin films could be directly used as the anode catalysts for the electro-oxidation of formic acid. Moreover, bimetallic catalysts (Pt/Au, Au/Pt) fabricated based on the monometallic Au, Pt micro/nanostructures exhibited the higher catalytic activity compared to the previous monometallic catalysts.     

Effect of Anionic Electrolytes and Precursor Concentrations on the Electrodeposited Pt Structures

Electrodeposition of functional metal surfaces has received great attention because of their useful applications. Recently, interesting electrodeposition behavior of Pt at −0.8 V (vs. Ag/AgCl) was reported, where underpotential deposited H (H_upd) layers played a unique role in the electrodeposition. Here, we report the effect of anionic electrolytes and precursor concentrations on the electrochemical deposition behavior of Pt. Depending on these two experimental parameters, two distinct Pt structures, monolayer Pt films and Pt spheres, were electrodeposited at −0.8 V. In addition to the underpotential deposited H (H_upd) layers formed at −0.8 V, the adsorption of Cl⁻ also plays a significant role in determining the electrodeposited Pt structures. When the PtCl₄²⁻ concentration was low and the Cl⁻ concentration was high enough for the adsorption of PtCl₄²⁻ to be blocked by the H_upd and Cl⁻ layers, monolayer Pt films were electrodeposited. Otherwise, further electrodeposition of Pt spheres over the monolayer Pt films occurred. The effect of other halide ion adsorption and the controlled growth of Pt spheres during the Pt electrodeposition were also investigated. The electrochemical deposition behavior of Pt demonstrated in this work provides insight into the fabrication of functional Pt surfaces.     

Electrochemical Design of Mesoporous Pt–Ru Alloy Films with Various Compositions toward Superior Electrocatalytic Performance

Mesoporous Pt–Ru alloy films with various compositions were synthesized by electrochemical plating in an aqueous surfactant solution. After the removal of surfactants, continuous mesoporous Pt–Ru alloy films possessing uniform mesopores with diameter about 7 nm were obtained. The Ru content in the films could be controlled from 0 to 13 at % by changing the precursor compositions. For all the films, the mesostructural periodicities and the mesopore sizes in the films were not changed. Due to the mesoporous structure and the doped Ru content, our mesoporous Pt–Ru films showed superior electrocatalytic activity for methanol oxidation reaction in comparison with the commercially available Pt catalyst.     

Electrochemical and coupled XPS studies on Langmuir–Blodgett mixed films of behenic acid and over-grafted platinum nanoparticles: Effect of the behenic acid removal

We report on the behavior of Pt nanoparticles functionalized with 4-mercaptoaniline over-grafted with 2-thiophenecarbonyl chloride. Stable Langmuir–Blodgett (LB) mixed films were built up from these particles with behenic acid (BHA). Such ultra-thin films were transferred onto gold substrates, which allowed the study of their electrochemical response towards Fe[(CN)₆]³⁻ and their XPS chemical analysis before and after the BHA removal. After washing, XPS analysis showed that the signals corresponding to the metal core and the capping agent were almost unchanged. Moreover, the layers became more compact, as shown by the Pt/Au intensity ratio decrease, because of the apparent decrease of length escape of electrons coming from gold, evidencing the removal of the fatty acid in the LB film structure. After BHA removal, the resulting electrochemical activity slightly increased. This result, in agreement with XPS analysis, showed the structural rearrangement within the film that facilitated the percolation between the particle domains.     

Infrared reflection–absorption properties of platinum nanoparticle films on metal electrode substrates: control of anomalous optical effects

A simple method is described for preparing ultrathin films of carbon-supported platinum nanoparticles on gold and other substrates for examination by electrochemical infrared reflection–absorption spectroscopy (EC-IRAS) in which the anomalous “anti-absorbance” properties commonly observed for metal particle arrays can be minimized as well as controlled. The tactic involves physical deposition as an aqueous suspension, followed by drying and thorough rinsing. The Pt monolayer-level films prepared by this means exhibit largely positive unipolar absorbance bands for CO adlayers, whereas an anomalous inverted band component appears for thicker films, especially those featuring high Pt nanoparticle loadings. These findings demonstrate the value of the film preparation tactic for exploring the electrocatalytic properties of C/Pt materials by using combined electrochemical and EC-IRAS measurements.     

Bimetallic dendrimer-encapsulated nanoparticles as catalysts: a review of the research advances

Bimetallic dendrimer-encapsulated nanoparticles (DENs) are important materials, because they have demonstrated improvement in performance compared to the monometallic DENs in many systems when they are used as catalysts. This tutorial review focuses on the recent research advances in bimetallic DENs with respect to their synthesis, characterization, and applications as catalysts. Bimetallic DENs can be made mainly via three routes: co-complexation, sequential loading, and partial displacement. The research in bimetallic DENs has been significantly promoted by the advancement of characterization instruments. The performances of bimetallic DENs as homogeneous and heterogeneous catalysts in organic synthesis have been compared with both monometallic DENs and their physical mixtures. It is concluded that the synergistic electronic effect in bimetallic nanoparticles enhances their catalytic activities.     

Polymer films on electrodes: Part II. Film structure and mechanism of electron transfer with electrodeposited poly(vinylferrocene)

The structure and properties of electrodeposited poly(vinylferrocene) (PVF) films on platinum electrodes (PVF/Pt) were examined by electron microscopy, X-ray photoelectron spectroscopy, various electrochemical techniques and measurements of the film resistance. The data were consistent with a mechanism in which the polymer films are permeable to dis-solved reactants. A theoretical treatment of this situation for chronoamperometry is presented. The oxidation and reduction of a variety of dissolved reactants with redox potentials far removed from that of the PVF/PVF⁺ system at PVF/Pt occurred by diffusion of the electroactive species through the polymer film and subsequent reaction at the platinum surface.     

Ubiquitous strategy for probing ATR surface-enhanced infrared absorption at platinum group metal-electrolyte interfaces

A versatile two-step wet process to fabricate Pt, Pd, Rh, and Ru nanoparticle films (simplified as nanofilms hereafter) for in situ attenuated total reflection Fourier transform infrared (ATR-FTIR) study of electrochemical interfaces is presented, which incorporates an initial chemical deposition of a gold nanofilm on the basal plane of a silicon prism with the subsequent electrodepostion of desired platinum group metal overlayers. Galvanostatic electrodeposition of Pt, Rh, and Pd from phosphate or perchloric acid electrolytes, or potentiostatic electrodeposition of Ru from a sulfuric acid electrolyte, yields sufficiently "pinhole-free" overlayers as evidenced by electrochemical and spectroscopic characterizations. The Pt group metal nanofilms thus obtained exhibit strongly enhanced IR absorption. In contrast to the corresponding metal films electrochemically deposited directly on glassy carbon and bulk metal electrodes, the observed enhanced absorption for the probe molecule CO exhibits normal unipolar band shapes. Scanning tunneling microscopic (STM) images reveal that fine nanoparticles of Pt group metals are deposited around wavy and stepped bunches of Au nanoparticles of relatively large sizes. This ubiquitous strategy is expected to open a wide avenue for extending ATR surface-enhanced IR absorption spectroscopy to explore molecular adsorption and reactions on technologically important transition metals, as exemplified by successful real-time spectroscopic and electrochemical monitoring of the oxidation of CO at Pd and that of methanol at Pt nanofilm electrodes. The spectral features of free water molecules coadsorbed with CO on Pt, Pd, Rh, and Ru are also discussed.     

铂粒子修饰单壁碳纳米管/聚苯胺复合膜对甲醛的电催化氧化

在溶有单壁碳纳米管(SWNTs)的苯胺溶液中, 通过电化学共聚合法成功制备了单壁碳纳米管(SWNT)/聚苯胺(PANI)复合膜. 用电沉积法将铂沉积到SWNT/PANI复合膜上. 样品的成分和形貌分别用XRD和SEM表征. 四探针和电化学交流阻抗的研究表明被PANI包裹的SWNTs整齐地排列在复合膜中, 从而提高了复合膜的电导率, 促进了电荷转移. 循环伏安(CV)说明Pt修饰的SWNT/PANI复合膜对于甲醛氧化具有良好的电催化活性及稳定性. 研究结果表明SWNT/PANI复合膜是一种非常好的催化剂载体, 有着广泛的应用前景.     

Metal/metal sulfide functionalized single-walled carbon nanotubes: FTO-free counter electrodes for dye sensitized solar cells

The use of single-walled carbon nanotubes (CNT) thin films to replace conventional fluorine-doped tin oxide (FTO) and both FTO and platinum (Pt) as the counter electrode in dye sensitized solar cells (DSSC) requires surface modification due to high sheet resistance and charge transfer resistance. In this paper, we report a simple, solution-based method of preparing FTO-free counter electrodes based on metal (Pt) or metal sulfide (Co(8.4)S(8), Ni(3)S(2)) nanoparticles/CNT composite films to improve device performance. Based on electrochemical studies, the relative catalytic activity of the composite films was Pt > Co(8.4)S(8) > Ni(3)S(2). We achieved a maximum efficiency of 3.76% for the device with an FTO-free counter electrode (Pt/CNT). The device with an FTO- and Pt-free (CoS/CNT) counter electrode gives 3.13% efficiency.     

A Sensitive and Selective Nitrite Detection in Water Using Graphene/Platinum Nanocomposite

A glassy carbon electrode modified with reduced graphene oxide and platinum nanocomposite film was developed simply by electrochemical method for the sensitive and selective detection of nitrite in water. The electrochemical reduction of graphene oxide (GO) efficiently eliminates oxygen‐containing functional groups. Pt nanoparticles were electrochemically and homogeneously deposited on the ErGO surface. Field emission scanning electron microscopy (FE‐SEM), Raman spectroscopy, attenuated total reflectance‐fourier transform infrared spectroscopy (ATR‐FTIR), electrochemical impedance spectroscopy (EIS), and cyclic voltammetry (CV) were used to examine the surface morphology and electrocatalytic properties of the Pt‐ErGO nanocomposite film‐modified electrode surface. The fabricated nitrite sensor showed good electrochemical performance with two linear ranges; one from 5 to 100 µM (R²=0.9995) and the other from 100 to 1000 µM (R²=0.9972) and a detection limit of 0.22 µM. The proposed sensor was successfully applied for the detection of nitrite in tap water samples which proves performance of the Pt‐ErGO nanocomposite films.