An environmentally benign synthesis of isoxazolines and isoxazoles mediated by potassium chloride in water

An effective and environmentally benign procedure for the synthesis of isoxazolines and isoxazoles has been developed by a cycloaddition of nitrile oxides with alkenes or alkynes in water. In this approach, potassium chloride is first oxidized into chlorine in water by the environmentally friendly oxidant Oxone®, then aldoximes are oxidized into nitrile oxides by the in situ generated hypochlorous acid, finally a 1,3-dipolar cycloaddition between nitrile oxides and alkenes or alkynes occurs to provide the corresponding isoxazolines and isoxazoles in good yields.     

An Efficient Deselenenylation Reaction to the Synthesis of 3, 5-Disubstituted Isoxazoline and Isoxazole

The development of organoselenium chemistry1 has been expanding rapidly during the last decades. Among them, organic selenides are key intermediates, for that they can be efficiently introduced, manipulated, and removed through selenoxide syn-elimination2. Our research group3 has been interested in the application of selenium in organic synthesis for several years. Isoxazolinyl substituted phenyl selenide 13a, although a β-H exists in the molecule, did not undergo selenoxide syn-elimination e…     

Synthesis and properties of azoles and their derivatives

The 1,3-dipolar cycloaddition reaction of nitrile N-oxides, and also the thermal condensation of arylhydroxamic acid chlorides with unsaturated derivatives of the adamantane series leads to the corresponding 3,5-disubstituted isoxazolines and isoxazoles.     

Novel Method for Soluble‐Polymer‐Supported Synthesis of 3,4,5‐Trisubstituted Isoxazoles

A practical and efficient liquid‐phase synthesis of 3,4,5‐trisubstituted isoxazoles using poly(ethylene glycol) as supported is described. Soluble‐polymer‐supported nitrile oxide generated in situ reacted with chalcones to afford polymer‐supported isoxazolines, which were cleaved by sodium methoxide to generate 3,4,5‐trisubstituted isoxazoles instead of 3,4,5‐trisubstituted isoxazolines. This sequential process provided a novel method to synthesize 3,4,5‐trisubstituted isoxazoles.     

Preparation of isoxazol(in)yl substituted selenides and their further deselenenylation reaction to synthesize 3,5-disubstituted isoxazoles

We report a mild 1,3-dipolar cycloaddition protocol for the preparation of 3-aryl-5-phenylselenomethyl isoxazoles and isoxazolines regioselectively. The former was further reacted with LDA and electrophilic substrates followed by selenoxide syn-elimination to afford 3-aryl-5-E-substituted-ethenyl isoxazoles stereoselectively and the latter was subjected to a ‘two-step’ elimination to afford 3-aryl-5-methyl isoxazoles.     

Enhanced rate of intramolecular nitrile oxide cycloaddition and rapid synthesis of isoxazoles and isoxazolines

Abstract  

An enhanced rate of intramolecular nitrile oxide cycloaddition and hence a rapid synthesis of isoxazoles and isoxazolines is described. Formation of nitrile oxides from oximes using only 1 or 2 Eq (equivalents) of aqueous sodium hypochlorite solution is also described.     

Generation of nitrile oxides from oximes using t-BuOI and their cycloaddition

tert-Butyl hypoiodite (t-BuOI) was found to be a powerful reagent for the cycloaddition of oximes and alkenes/alkynes, leading to the formation of a variety of isoxazolines or isoxazoles under mild conditions.     

Solid-phase synthesis of heterocyclic nucleoside analogues: substituted uracils tethered to isoxazoles, isoxazolines, and triazoles from a selenopolystyrene resin

A heterocyclic nucleoside analogue library of uracils N1 tethered to isoxazoles, isoxazolines, and triazoles and uracil N3 tethered to isoxazolines and isoxazoles was constructed by solid-phase organic synthesis. This strategy opens the way for the generation of small libraries of heterocyclic nucleoside analogues for biological screening.     

Expanding stereochemical and skeletal diversity using petasis reactions and 1,3-dipolar cycloadditions

A short and modular synthetic pathway using intramolecular 1,3-dipolar cycloaddition reactions and yielding functionalized isoxazoles, isoxazolines, and isoxazolidines is described. The change in shape of previous compounds and those in this study is quantified and compared using principal moment-of-inertia shape analysis.     

An efficient one-step regiospecific synthesis of novel isoxazolines and isoxazoles of N-substituted saccharin derivatives through solvent-free microwave-assisted [3+2] cycloaddition

Novel isoxazolines and isoxazoles of N-substituted saccharin derivatives are synthesized in good yields by 1,3-dipolar cycloaddition of N-allyl or propargyl N-substituted saccharin with arylnitrile oxide under solvent-free microwave irradiation. In this process, the yields were significantly improved over conventional heating, without alteration of the selectivity. The regioselectivity as well as the nonthermal specific microwave effect are discussed.     

3-Benzoylisoxazolines by 1,3-Dipolar Cycloaddition: Chloramine-T-Catalyzed Condensation of α-Nitroketones with Dipolarophiles

In this study, 3-benzoylisoxazolines were synthesized by reacting alkenes with various α-nitroketones using chloramine-T as the base. The scope of α-nitroketones and alkenes is extensive, including different alkenes and alkynes to form various isoxazolines and isoxazoles. The use of chloramine-T, as the low-cost, easily handled, moderate base for 1,3-dipolar cycloaddition is attractive.     

Synthesis of novel fused isoxazoles and isoxazolines by sequential Ugi/INOC reactions

We report the synthesis of novel fused isoxazoles and isoxazolines by employing an unprecedented Ugi/INOC synthetic sequence. The coupling of the Ugi multicomponent reaction with the intramolecular N-oxide cyclization provides access to unique heterocyclic ring systems in two steps from easily available starting materials in moderate to good overall yields.     

一种合成3,5-二取代异噁唑的新方法

研究了端基炔烃和醛肟在间氯过氧苯甲酸和催化量碘苯作用下的[3+2]环合反应, 结果表明, 该过程经过一个有机高价碘中间体而进行. 通过该反应, 端基炔烃在氧化剂间氯过氧苯甲酸和催化剂碘苯的作用下与醛肟反应, 常温下可得到产率良好并具有区域选择性的3,5-二取代异噁唑化合物. 本文考察了反应条件的影响, 提出了可能的反应机理, 为简便快速合成3,5-二取代异噁唑化合物提供了一种新方法.     

Synthesis of Spirocyclic and Fused Isoxazoline Building Blocks

A highly efficient multigram synthesis of spirocyclic and fused isoxazoline building blocks is described. Isoxazoline-3-carboxylates were synthesized via a regioselective 1,3-dipolar cycloaddition reaction of 2-chloro-2-(hydroxyimino)acetate and carbo- or heterocyclic alkenes bearing endo- or exocyclic C=C double bonds, resulting in fused or spirocyclic isoxazolines, respectively. The preparation of up to 300 g of these compounds was achieved in a single run. The ester group of isoxazolines was then subjected to common synthetic transformations for the synthesis of corresponding building blocks, including alcohols, chlorides, azides, amines, aldehydes, carboxylic acids, amino acids and their derivatives, difluoromethyl-substituted compounds, and bicyclic γ-lactones. Additionally, a direct cycloaddition-based approach to the synthesis of aminoalkyl- and chloromethyl-substituted isoxazolines was proposed to improve their preparation. The described isoxazoline building blocks are expected to be valuable tools for drug discovery.     

Combinatorial synthesis of isoxazole library and their liquid crystalline properties

Six types of isoxazoles including 60 molecules were synthesized using combinatorial synthesis on solid support in a parallel fashion. Highly regioselective 1,3-dipolar cycloaddition of the nitrile oxides to the triple bond of the solid-attached ethynylbenzamides gave isoxazoles on solid support in good yield. Thirty molecules of them exhibited mesomorphic properties. The combination of molecular mechanics calculations and X-ray diffraction experiments of 2g and 3g revealed that the smectic phase of 2g had a bilayer structure, whereas 3g showed a monolayer liquid crystalline phase. These are supported in comparison with the single crystal structures of 2g and 3g.     

Recent progresses in the synthesis of functionalized isoxazoles

Isoxazole is an important pharmacophore that is critical for biological activity. The isoxazole ring ranks 33rd in frequency among the 351 ring systems found in marketed drugs, thus suggesting a great deal of interest in the synthesis of functional isoxazoles. In recent years, various approaches have been developed for the synthesis and functionalization of isoxazoles. This comprehensive survey summarizes the recent new synthetic approaches to functionalized isoxazoles, with particular focus on the last three years with regard to the following reaction types: (1) 1,3-dipolar cycloaddition, (2) condensation, (3) cycloisomerization, and (4) direct functionalization.     

A Versatile Iron‐Catalyzed Protocol for the One‐Pot Synthesis of Isoxazoles or Isoxazolines from the Same Propargylic Alcohols

The use N‐sulfonyl‐protected hydroxylamines as bi‐nucleophiles in iron‐catalyzed propargylic substitutions allows the selective one‐pot synthesis of four classes of substituted isoxazoles or isoxazolines from the same propargylic alcohols (21 examples) by simply tuning the nature of the base. By using an iron(III) catalyst and a base such as triethylamine (3 equiv), isoxazoles 3 are obtained in good isolated yields (56–95%), whereas N‐sulfonyl‐protected isoxazolines 6 are selectively obtained (77–93% yield) by using iron and gold catalysts in the presence of a catalytic amount of pyridine (10 mol%).     

Copper(0) Nanoparticles in Click Chemistry: Synthesis of 3,5‐Disubstituted Isoxazoles

An efficient procedure for the synthesis of 3,5‐disubstituted isoxazoles via [3 + 2] cycloaddition reaction of in situ generated nitrile oxides with acetylenes employing readily preparable copper(0) nanoparticles is described. A variety of in situ generated nitrile oxide and acetylenic substrates were engaged in the study and found to undergo cyclization in short duration affording respective isoxazoles in excellent yield. Several amino acid‐derived isoxazoles were also prepared in high yield. Consistent activity of the recovered catalyst was found to be almost same up to three cycles.     

Mo(CO)6-mediated synthesis of calix[4]arenes carrying β-hydroxy ketones or α,β-unsaturated-β-amino ketones

Mo(CO)₆-mediated ring opening reactions of calix[4]arene isoxazolines/isoxazoles provide a new synthetic methodology for calix[4]arenes carrying bifunctional β-hydroxy ketones or α,β-unsaturated-β-amino ketones. Mo(CO)₆ is a highly selective and convenient reagent for the ring opening process of these supramolecular isoxazolines/isoxazoles.     

Concise Synthesis and Antimicrobial Activities of New Substituted 5‐Isoxazolpenicillins

The synthesis of a series of new 5‐isoxazolpenicillins is described, which were obtained by coupling substituted isoxazoles with 6‐APA. Concise large‐scale synthesis of 3,5‐disubstituted isoxazoles by 1,3‐dipolar cycloaddition using copper(I) as catalyst was also investigated. Representative compounds were assayed for antimicrobial activities, showing satisfactory antimicrobial activities against Gram‐negative bacteria.