The oxidative degradation of dibenzoazepine derivatives by cerium(IV) complexes in acidic sulfate media

The kinetics of the oxidation of imipramine and desipramine using cerium(IV) complexes were studied in the presence of a large excess of azepine derivative (TCA) in acidic sulfate media using UV-Vis spectroscopy. The reaction proceeds via dibenzoazepine radical formation, identified by EPR measurements. The kinetics of the first degradation step were studied independently of the further slower degradation reactions. Linear dependences, with zero intercept, of the pseudo-first-order rate constants (k(obs)) on [TCA] were established for both dibenzoazepine radical formation processes. Rates of reactions decreased with increasing concentration of the H(+) ion indicating that cerium(IV) as well as both reductants exist in an equilibrium with their protolytic forms. The activation parameters for the degradation of dibenzoazepine derivatives in the first oxidation stage were as follows: ΔH(≠) = 39 ± 2 kJ mol(-1), ΔS(≠) = -28 ± 8 J K(-1) mol(-1) for imipramine and ΔH(≠) = 39 ± 2 kJ mol(-1), ΔS(≠) = -28 ± 6 J K(-1) mol(-1) for desipramine, respectively. Imipramine and desipramine radicals dimerized leading to an intermediate radical dimer, which decayed in a first-order consecutive decay process. These two further reactions proceed with rates which are characterized by non-linear dependences of the pseudo-first-order rate constants (k(obs)) on [TCA]. The degradation reaction of the intermediate radical dimer leads to an uncharged dimer as a final product. Mechanistic consequences of all the results are discussed.     

Oxygen atom transfer from a trans-dioxoruthenium(VI) complex to nitric oxide

In aqueous acidic solutions trans-[Ru(VI)(L)(O)(2)](2+) (L=1,12-dimethyl-3,4:9,10-dibenzo-1,12-diaza-5,8-dioxacyclopentadecane) is rapidly reduced by excess NO to give trans-[Ru(L)(NO)(OH)](2+). When ≤1 mol equiv NO is used, the intermediate Ru(IV) species, trans-[Ru(IV)(L)(O)(OH(2))](2+), can be detected. The reaction of [Ru(VI)(L)(O)(2)](2+) with NO is first order with respect to [Ru(VI)] and [NO], k(2)=(4.13±0.21)×10(1) M(-1) s(-1) at 298.0 K. ΔH(≠) and ΔS(≠) are (12.0±0.3) kcal mol(-1) and -(11±1) cal mol(-1) K(-1), respectively. In CH(3)CN, ΔH(≠) and ΔS(≠) have the same values as in H(2)O; this suggests that the mechanism is the same in both solvents. In CH(3)CN, the reaction of [Ru(VI)(L)(O)(2)](2+) with NO produces a blue-green species with λ(max) at approximately 650 nm, which is characteristic of N(2)O(3). N(2)O(3) is formed by coupling of NO(2) with excess NO; it is relatively stable in CH(3)CN, but undergoes rapid hydrolysis in H(2)O. A mechanism that involves oxygen atom transfer from [Ru(VI)(L)(O)(2)](2+) to NO to produce NO(2) is proposed. The kinetics of the reaction of [Ru(IV)(L)(O)(OH(2))](2+) with NO has also been investigated. In this case, the data are consistent with initial one-electron O(-) transfer from Ru(IV) to NO to produce the nitrito species [Ru(III)(L)(ONO)(OH(2))](2+) (k(2)>10(6) M(-1) s(-1)), followed by a reaction with another molecule of NO to give [Ru(L)(NO)(OH)](2+) and NO(2)(-) (k(2)=54.7 M(-1) s(-1)).     

Phenalenyl-based organozinc catalysts for intramolecular hydroamination reactions: a combined catalytic, kinetic, and mechanistic investigation of the catalytic cycle

Herein, we report the synthesis and characterization of two organozinc complexes that contain symmetrical phenalenyl (PLY)-based N,N-ligands. The reactions of phenalenyl-based ligands with ZnMe(2) led to the formation of organozinc complexes [N(Me),N(Me)-PLY]ZnMe (1) and [N(iPr),N(iPr)-PLY]ZnMe (2) under the evolution of methane. Both complexes (1 and 2) were characterized by NMR spectroscopy and elemental analysis. The solid-state structures of complexes 1 and 2 were determined by single-crystal X-ray crystallography. Complexes 1 and 2 were used as catalysts for the intramolecular hydroamination of unactivated primary and secondary aminoalkenes. A combined approach of NMR spectroscopy and DFT calculations was utilized to obtain better insight into the mechanistic features of the zinc-catalyzed hydroamination reactions. The progress of the catalysis for primary and secondary aminoalkene substrates with catalyst 2 was investigated by detailed kinetic studies, including kinetic isotope effect measurements. These results suggested pseudo-first-order kinetics for both primary and secondary aminoalkene activation processes. Eyring and Arrhenius analyses for the cyclization of a model secondary aminoalkene substrate afforded ΔH(≠) =11.3?kcal?mol(-1) , ΔS(≠) =-35.75?cal?K(-1) mol(-1) , and E(a) =11.68?kcal?mol(-1) . Complex 2 exhibited much-higher catalytic activity than complex 1 under identical reaction conditions. The in situ NMR experiments supported the formation of a catalytically active zinc cation and the DFT calculations showed that more active catalyst 2 generated a more stable cation. The stability of the catalytically active zinc cation was further supported by an in situ recycling procedure, thereby confirming the retention of catalytic activity of compound 2 for successive catalytic cycles. The DFT calculations showed that the preferred pathway for the zinc-catalyzed hydroamination reactions is alkene activation rather than the alternative amine-activation pathway. A detailed investigation with DFT methods emphasized that the remarkably higher catalytic efficiency of catalyst 2 originated from its superior stability and the facile formation of its cation compared to that derived from catalyst 1.     

Spectrometric study of AOT-hydrolysis reaction in water/AOT/isooctane microemulsions using phenolphthalein as a chemical probe

The kinetics of the alkaline hydrolysis of sodium bis(2-ethylhexyl)sulfosuccinate (AOT) in water/AOT/isooctane microemulsions has been studied by monitoring the absorbance change of the phenolphthalein in the system with time. The apparent first-order rate constant k(obs) has been obtained and found to be dependent on both the molar ratio of water to AOT ω and the temperature. The dependences of k(obs) on ω have been analyzed by a pseudophase model which gives the true rate constants k(i) of the AOT-hydrolysis reaction on the interface and the partition coefficients K(wi) for the distribution of OH(-) between aqueous and interface pseudophases at various temperatures; the latter is almost independent of the temperature and ω. The temperature dependences of the reaction rate constants k(obs) and k(i) have been analyzed to obtain enthalpy ΔH(≠), entropy ΔS(≠), and energy E(a) of activation, which indicate that the distribution of OH(-) between aqueous and interface pseudophases increases ΔS(≠) but makes no contribution to E(a) and ΔH(≠). The influence of the overall concentration of AOT in the system on the rate constant has been examined and found to be negligible. It contradicts with what was reported by García-Río et al. (1) but confirms that the first-order reaction of the AOT-hydrolysis takes place on the surfactant interface. The study of the influence of AOT-hydrolysis on the kinetics of the alkaline fading of crystal violet or phenolphthalein in the water/AOT/isooctane microemulsions suggests that corrections for the AOT-hydrolysis in these reactions are required.     

NMR study of ligand exchange and electron self-exchange between oxo-centered trinuclear clusters [Fe3(μ3-O)(μ-O2CR)6(4-R'py)3](+/0)

The syntheses, single crystal X-ray structures, and magnetic properties of the homometallic μ?-oxo trinuclear clusters [Fe?(μ?-O)(μ-O?CCH?)?(4-Phpy)?](ClO?) (1) and [Fe?(μ?-O)(μ-O?CAd)?(4-Mepy)?](NO?) (2) are reported (Ad = adamantane). The persistence of the trinuclear structure within 1 and 2 in CD?Cl? and C?D?Cl? solutions in the temperature range 190-390 K is demonstrated by 1H NMR. An equilibrium between the mixed pyridine clusters [Fe?(μ?-O)(μ-O?CAd)?(4-Mepy)(3-x)(4-Phpy)(x)](NO?) (x = 0, 1, 2, 3) with a close to statistical distribution of these species is observed in CD?Cl? solutions. Variable-temperature NMR line-broadening made it possible to quantify the coordinated/free 4-Rpy exchanges at the iron centers of 1 and 2: k(ex)2?? = 6.5 ± 1.3 × 10?1 s?1, ΔH(?) = 89.47 ± 2 kJ mol?1, and ΔS(?) = +51.8 ± 6 J K?1 mol?1 for 1 and k(ex)2?? = 3.4 ± 0.5 × 10?1 s?1, ΔH(?) = 91.13 ± 2 kJ mol?1, and ΔS(?) = +51.9 ± 5 J K?1 mol?1 for 2. A limiting D mechanism is assigned for these ligand exchange reactions on the basis of first-order rate laws and positive and large entropies of activation. The exchange rates are 4 orders of magnitude slower than those observed for the ligand exchange on the reduced heterovalent cluster [Fe(III)?Fe(II)(μ?-O)(μ-O?CCH?)?(4-Phpy)?] (3). In 3, the intramolecular Fe(III)/Fe(II) electron exchange is too fast to be observed. At low temperatures, the 1/3 intermolecular second-order electron self-exchange reaction is faster than the 4-Phpy ligand exchange reactions on these two clusters, suggesting an outer-sphere mechanism: k?2?? = 72.4 ± 1.0 × 103 M?1 s?1, ΔH(?) = 18.18 ± 0.3 kJ mol?1, and ΔS(?) = -90.88 ± 1.0 J K?1 mol?1. The [Fe?(μ?-O)(μ-O?CCH?)?(4-Phpy)?](+/0) electron self-exchange reaction is compared with the more than 3 orders of magnitude faster [Ru?(μ?-O)(μ-O?CCH?)?(py)?](+/0) self-exchange reaction (ΔΔG(exptl)(?298) = 18.2 kJ mol?1). The theoretical estimated self-exchange rate constants for both processes compare reasonably well with the experimental values. The equilibrium constant for the formation of the precursor to the electron-transfer and the free energy of activation contribution for the solvent reorganization to reach the electron transfer step are taken to be the same for both redox couples. The larger ΔG(exptl)(?298) for the 1/3 iron self-exchange is attributed to the larger (11.1 kJ mol?1) inner-sphere reorganization energy of the 1 and 3 iron clusters in addition to a supplementary energy (6.1 kJ mol?1) which arises as a result of the fact that each encounter is not electron-transfer spin-allowed for the iron redox couple.     

Theoretical study on the gas-phase reaction mechanism between palladium monoxide and methane

The gas-phase reaction mechanism between palladium monoxide and methane has been theoretically investigated on the singlet and triplet state potential energy surfaces (PESs) at the CCSD(T)/AVTZ//B3LYP/6-311+G(2d, 2p), SDD level. The major reaction channel leads to the products PdCH(2) + H(2)O, whereas the minor channel results in the products Pd + CH(3)OH, CH(2)OPd + H(2), and PdOH + CH(3). The minimum energy reaction pathway for the formation of main products (PdCH(2) + H(2)O), involving one spin inversion, prefers to start at the triplet state PES and afterward proceed along the singlet state PES, where both CH(3)PdOH and CH(3)Pd(O)H are the critical intermediates. Furthermore, the rate-determining step is RS-CH(3) PdOH → RS-2-TS1cb → RS-CH(2)Pd(H)OH with the rate constant of k = 1.48 × 10(12) exp(-93,930/RT). For the first C-H bond cleavage, both the activation strain ΔE(≠)(strain) and the stabilizing interaction ΔE(≠)(int) affect the activation energy ΔE(≠), with ΔE(≠)(int) in favor of the direct oxidative insertion. On the other hand, in the PdCH(2) + H(2) O reaction, the main products are Pd + CH(3)OH, and CH(3)PdOH is the energetically preferred intermediate. In the CH(2)OPd + H(2) reaction, the main products are Pd + CH(3)OH with the energetically preferred intermediate H(2)PdOCH(2). In the Pd + CH(3)OH reaction, the main products are CH(2)OPd + H(2), and H(2)PdOCH(2) is the energetically predominant intermediate. The intermediates, PdCH(2), H(2) PdCO, and t-HPdCHO are energetically preferred in the PdC + H(2), PdCO + H(2), and H(2)Pd + CO reactions, respectively. Besides, PdO toward methane activation exhibits higher reaction efficiency than the atom Pd and its first-row congener NiO.     

Role of Fe(IV)-oxo intermediates in stoichiometric and catalytic oxidations mediated by iron pyridine-azamacrocycles

An iron(II) complex with a pyridine-containing 14-membered macrocyclic (PyMAC) ligand L1 (L1 = 2,7,12-trimethyl-3,7,11,17-tetra-azabicyclo[11.3.1]heptadeca-1(17),13,15-triene), 1, was prepared and characterized. Complex 1 contains low-spin iron(II) in a pseudo-octahedral geometry as determined by X-ray crystallography. Magnetic susceptibility measurements (298 K, Evans method) and M?ssbauer spectroscopy (90 K, δ = 0.50(2) mm/s, ΔE(Q) = 0.78(2) mm/s) confirmed that the low-spin configuration of Fe(II) is retained in liquid and frozen acetonitrile solutions. Cyclic voltammetry revealed a reversible one-electron oxidation/reduction of the iron center in 1, with E(1/2)(Fe(III)/Fe(II)) = 0.49 V vs Fc(+)/Fc, a value very similar to the half-wave potentials of related macrocyclic complexes. Complex 1 catalyzed the epoxidation of cyclooctene and other olefins with H(2)O(2). Low-temperature stopped-flow kinetic studies demonstrated the formation of an iron(IV)-oxo intermediate in the reaction of 1 with H(2)O(2) and concomitant partial ligand oxidation. A soluble iodine(V) oxidant, isopropyl 2-iodoxybenzoate, was found to be an excellent oxygen atom donor for generating Fe(IV)-oxo intermediates for additional spectroscopic (UV-vis in CH(3)CN: λ(max) = 705 nm, ε ≈ 240 M(-1) cm(-1); M?ssbauer: δ = 0.03(2) mm/s, ΔE(Q) = 2.00(2) mm/s) and kinetic studies. The electrophilic character of the (L1)Fe(IV)═O intermediate was established in rapid (k(2) = 26.5 M(-1) s(-1) for oxidation of PPh(3) at 0 °C), associative (ΔH(?) = 53 kJ/mol, ΔS(?) = -25 J/K mol) oxidation of substituted triarylphosphines (electron-donating substituents increased the reaction rate, with a negative value of Hammet's parameter ρ = -1.05). Similar double-mixing kinetic experiments demonstrated somewhat slower (k(2) = 0.17 M(-1) s(-1) at 0 °C), clean, second-order oxidation of cyclooctene into epoxide with preformed (L1)Fe(IV)═O that could be generated from (L1)Fe(II) and H(2)O(2) or isopropyl 2-iodoxybenzoate. Independently determined rates of ferryl(IV) formation and its subsequent reaction with cyclooctene confirmed that the Fe(IV)-oxo species, (L1)Fe(IV)═O, is a kinetically competent intermediate for cyclooctene epoxidation with H(2)O(2) at room temperature. Partial ligand oxidation of (L1)Fe(IV)═O occurs over time in oxidative media, reducing the oxidizing ability of the ferryl species; the macrocyclic nature of the ligand is retained, resulting in ferryl(IV) complexes with Schiff base PyMACs. NH-groups of the PyMAC ligand assist the oxygen atom transfer from ferryl(IV) intermediates to olefin substrates.     

三聚磷酸二氢铝吸附Cd~(2+)的动力学研究

采用动态吸附法研究三聚磷酸二氢铝吸附镉离子的动力学行为并进行吸附活化状态热力学参数分析。结果表明,当三聚磷酸二氢铝粒径小于150μm、搅拌器转速大于200r/min、Cd2+的初始浓度为500mg/L时,三聚磷酸二氢铝对镉离子的化学吸附符合二级反应动力学方程,吸附速率常数k与温度T之间的关系符合Arrhenius方程式,吸附的活化能为Ea=27.93kJ/mol,吸附的频率因子A=65.33L/mg·min,ln(k/T)与1/T之间的关系符合Eyring公式,其活化焓ΔH=25.44kJ/mol,活化熵ΔS=-218.54J/mol·K。     

Structure and dynamics of binary and ternary lanthanide(III) and actinide(III) tris[4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione] (TTA) complexes. Part 2, the structure and dynamics of binary and ternary complexes in the Y(III)/Eu(III)-TTA-tributylphosphate (TBP) system in chloroform as studied by NMR spectroscopy

The stoichiometric reaction mechanisms, rate constants and activation parameters for inter- and intramolecular ligand exchange reactions in the binary Y/Eu(TTA)(3)(OH(2))(2)-HTTA and the ternary Y/Eu(TTA)(3)(OH(2))(2)-TBP systems have been studied in chloroform using (1)H and (31)P NMR methods. Most complexes contain coordinated water that is in very fast exchange with water in the chloroform solvent. The exchange reactions involving TTA/HTTA and TBP are also fast, but can be studied at lower temperature. The rate constant and activation parameters for the intramolecular exchange between two structure isomers in Y(TTA)(3)(OH(2))(2) and Y(TTA)(3)(TBP)(OH(2)) were determined from the line-broadening of the methine protons in coordinated TTA. The rate equations for the intermolecular exchange between coordinated TTA and free HTTA in both complexes are consistent with a two-step mechanism where the first step is a fast complex formation of HTTA, followed by a rate determining step involving proton transfer from coordinated HTTA to TTA. The rate constants for both the inter- and intramolecular exchange reactions are significantly smaller in the TBP system. The same is true for the activation parameters in the Y(TTA)(3)(OH(2))(2)-HTTA and the ternary Y/Eu(TTA)(3)(TBP)(OH(2))-HTTA systems, which are ΔH(≠) = 71.8 ± 2.8 kJ mol(-1), ΔS(≠) = 62.4 ± 10.3 J mol(-1) K(-1) and ΔH(≠) = 38.8 ± 0.6 kJ mol(-1), ΔS(≠) = -93.0 ± 3.3 J mol(-1) K(-1), respectively. The large difference in the activation parameters does not seem to be related to a difference in mechanism as judged by the rate equation; this point will be discussed in a following communication. The rate and mechanism for the exchange between free and coordinated TBP follows a two-step mechanism, involving the formation of Y(TTA)(3)(TBP)(2).     

果糖催化合成四氢苯并[b]吡喃衍生物:动力学和机理研究(英文)

Fructose was used as an efficient catalyst for three-component condensation reactions of aryl aldehydes,malononitrile,and dimedone in a mixture of EtOH and H_2O as green solvents.The advantages of this method are a short reaction time,high yields,low cost,easy accesses,and simple work-up.The mechanism of the synthesis of a derivative of 4H-tetrahydrobenzo[b]pyran was clarified using spectroscopic kinetic methods.The activation energy(Ea=65.34 kJ/mol)and related kinetic parameters(ΔG=69.14 kJ/mol,ΔS=20.99 J/(mol·K),andΔH=62.89 kJ/mol)were calculated,based on the effects of temperature,concentration,and solvent.The first step in the proposed mechanism was identified as the rate-determining step(k1),based on the steady-state approximation.     

A high-valent iron-oxo corrolazine activates C-H bonds via hydrogen-atom transfer

Oxidation of the Fe(III) complex (TBP(8)Cz)Fe(III) [TBP(8)Cz = octakis(4-tert-butylphenyl)corrolazinate] with O-atom transfer oxidants under a variety of conditions gives the reactive high-valent Fe(O) complex (TBP(8)Cz(+?))Fe(IV)(O) (2). The solution state structure of 2 was characterized by XAS [d(Fe-O) = 1.64 ?]. This complex is competent to oxidize a range of C-H substrates. Product analyses and kinetic data show that these reactions occur via rate-determining hydrogen-atom transfer (HAT), with a linear correlation for log k versus BDE(C-H), and the following activation parameters for xanthene (Xn) substrate: ΔH(++) = 12.7 ± 0.8 kcal mol(-1), ΔS(++) = -9 ± 3 cal K(-1) mol(-1), and KIE = 5.7. Rebound hydroxylation versus radical dimerization for Xn is favored by lowering the reaction temperature. These findings provide insights into the factors that control the intrinsic reactivity of Compound I heme analogues.     

Free Energy Relationships for Reactions of Substituted Benzhydrylium Ions: From Enthalpy over Entropy to Diffusion Control

Second-order rate constants k(2) for the reactions of various donor- and acceptor-substituted benzhydrylium ions Ar(2)CH(+) with π-nucleophiles in CH(2)Cl(2) were determined by laser flash irradiation of benzhydryl triarylphosphonium salts Ar(2)CH-PAr(3)(+)X(-) in the presence of a large excess of the nucleophiles. This method allowed us to investigate fast reactions up to the diffusional limit including reactions of highly reactive benzhydrylium ions with m-fluoro and p-(trifluoromethyl) substituents. The rate constants determined in this work and relevant literature data were jointly subjected to a correlation analysis to derive the electrophilicity parameters E for acceptor-substituted benzhydrylium ions, as defined by the linear free energy relationship log?k(2)(20 °C) = s(N)(N + E). The new correlation analysis also leads to the N and s(N) parameters of 18 π-nucleophiles, which have only vaguely been characterized previously. The correlations of log?k(2) versus E are linear well beyond the range where the activation enthalpies ΔH(?) of the reactions are extrapolated to reach the value of ΔH(?) = 0, showing that the change from enthalpy control to entropy control does not cause a bend in the linear free energy relationship, a novel manifestation of the compensation effect. A flattening of the correlation lines only occurs for k(2) > 10(8) M(-1) s(-1) when the diffusion limit is approached.     

Hydroxylation mechanism of methane and its derivatives over designed methane monooxygenase model with peroxo dizinc core

The peroxo dizinc Zn(2)O(2) complex Q coordinated by imidazole and carboxylate groups for each Zn center has been designed to model the hydroxylase component of methane monooxygenase (MMO) enzyme, on the basis of the experimentally available structure information of enzyme with divalent zinc ion and the MMO with Fe(2)O(2) core. The reaction mechanism for the hydroxylation of methane and its derivatives catalyzed by Q has been investigated at the B3LYP*/cc-pVTZ, Lanl2tz level in protein solution environment. These hydroxylation reactions proceed via a radical-rebound mechanism, with the rate-determining step of the C-H bond cleavage. This radical-rebound reaction mechanism is analogous to the experimentally available MMOs with diamond Fe(2)O(2) core accompanied by a coordinate number of six for the hydroxylation of methane. The rate constants for the hydroxylation of substrates catalyzed by Q increase along CH(4) < CH(3)F < CH(3)CN ≈ CH(3)NO(2) < CH(3)CH(3). Both the activation strain ΔE(≠)(strain) and the stabilizing interaction ΔE(≠)(int) jointly affect the activation energy ΔE(≠). For the C-H cleavage of substrate CH(3)X, with the decrease of steric shielding for the substituted CH(3)X (X = F > H > CH(3) > NO(2) > CN) attacking the O center in Q, the activation strain ΔE(≠)(strain) decreases, whereas the stabilizing interaction ΔE(≠)(int) increases. It is predicted that the MMO with peroxo dizinc Zn(2)O(2) core should be a promising catalyst for the hydroxylation of methane and its derivatives.     

High-valent diiron species generated from N-bridged diiron phthalocyanine and H(2)O(2)

N-bridged diiron tetra-tert-butylphthalocyanine activates H(2)O(2) to form anionic hydroperoxo complex [(Pc)Fe(IV)=N-Fe(III)(Pc)-OOH](-) prone to heterolytic cleavage of O-O bond with the release of OH(-) and formation of neutral diiron oxo phthalocyanine cation radical complex, PcFe(IV)=N-Fe(IV)(Pc(+)˙)=O. ESI-MS data showed stability of the Fe-N-Fe binuclear structure upon formation of this species, capable of oxidizing methane and benzene via O-atom transfer. The slow formation kinetics and the high reactivity preclude direct detection of this oxo complex by low temperature UV-vis spectroscopy. However, strong oxidizing properties and the results of EPR study support the formation of PcFe(IV)=N-Fe(IV)(Pc(+)˙)=O. Addition of H(2)O(2) at -80 °C led to the disappearance of iron EPR signal and to the appearance of the narrow signal at g = 2.001 consistent with the transient formation of PcFe(IV)=N-Fe(IV)(Pc(+)˙)=O. In the course of this study, another high valent diiron species was prepared in the solid state with 70% yield. The M?ssbauer spectrum shows two quadrupole doublets with δ(1) = -0.14 mm s(-1), ΔE(Q1) = 1.57 mm s(-1) and δ(2) = -0.10 mm s(-1), ΔE(Q2) = 2.03 mm s(-1), respectively. The negative δ values are consistent with formation of Fe(iv) states. Fe K-edge EXAFS spectroscopy reveals conservation of the diiron Fe-N-Fe core. In XANES, an intense 1s → 3d pre-edge feature at 7114.4 eV suggests formation of Fe(iv) species and attaching of one oxygen atom per two Fe atoms at the 1.90 ? distance. On the basis of M?ssbauer, EPR, EXAFS and XANES data this species was tentatively assigned as (Pc)Fe(IV)=N-Fe(IV)(Pc)-OH which could be formed from PcFe(IV)=N-Fe(IV)(Pc(+)˙)=O by hydrogen atom abstraction from a solvent molecule. Thus, despite unfavourable kinetics, we succeeded in the preparation of the first dirion(iv) phthalocyanine complex with oxygen ligand, generated in the (Pc)Fe(IV)=N-Fe(III)(Pc) - H(2)O(2) system capable of oxidizing methane.     

Theoretical study of free-radical migrations

Free-radical migrations have been investigated by ab initio molecular orbital theory to account for the facts that 1,2-migrations are observed for Cl-atoms, aryl or vinyl groups, whereas for H atoms only 1,5- and 1,6-migrations have been seen in contrast to the easy 1,2-hydride shifts in cations. The optimum geometry and energy models of the transition states of 1,2- and 1,5-migrations, and of their corresponding initial states have been determined using the Gaussian 70 STO-3G RHF method. The calculated activation energies ΔE are in agreement with experimental observations. The main features of the 1,2-migration reactions are (i) ΔE is more important for elements of the first and second row of the periodic classification than for those belonging to the third row; (ii) protonation strongly reduces ΔE. For both 1,2- and 1,5-migrations a correlation exists between ΔE and the energetic change of the frontier orbital, Δ?_somo: the reactions are under frontier orbital control.     

Theoretical Study on the Mechanism of the Gas-phase Reaction of Sc＋ with Propargyl Alcohol

In order to elucidate the reaction mechanisms of reaction Sc^＋ with propargyl alcohol (PPA), the triplet potential energy surface for the reactions has been theoretically investigated using a DFT method. The geometries for the reactants, intermediates, transition states and products were completely optimized at B3LYP/DZVP level. The single point energy of each stationary point was calculated at MP4/(6-311＋G** for C, H, O and Lanl2dz for Sc^＋) level. All the transition states were verified by the vibrational analysis and the internal reaction coordinate (IRC) calculations. The present results show that the reaction takes an insertion-elimination mechanism both along the O—H and C—O bond activation branches, but the C—O bond activation is much more favorable in energy than the O—H bond activation. All theoretical results not only support the existing conclusions inferred from early experiment, but also complement the pathway and mechanism for this reaction.     

Spectroscopic characterization,thermogravimetric and antimicrobial studies of some new metal complexes derived from4-(4-Isopropyl phenyl)-2-oxo-6-phenyl 1,2-dihyropyridine-3-carbonitrile (L)

A new series of Fe (III), Co (II), Zn (II), Y (III), Zr (IV) and La (III) complexes derived from the novel ligand 4-(4-Isopropyl phenyl)-2-oxo-6-phenyl 1,2-dihyropyridine-3-carbonitrile (L) were synthesized and characterized. The mode of bonding of L and geometrical structures of their metal complexes were elucidated by different micro analytical and spectral methods (FT-IR,UV–visible,1H NMR and Mass spectra) as well as thermal analysis (TG and DTG), and differential scanning calorimetry (DSC). The results of analytical and spectroscopic equipments revealed that L acts as bidentate through nitrogen of carbonitrile group and oxygen of keto group. The conductivity measurement results deduced that these chelates are electrolyte with 1:2 for Co (II), Zn (II), and Zr (IV) and 1:3 for Fe (III), Y (III), and La (III). The results of magnetic moment measurements supported paramagnetic for some complexes (Fe (III), Co (II) and Cu (II)) and diamagnetic phenomena for the other complexes (Y (III), Zr (IV) and La (III)). Thermodynamic parameters such as energy of activation E*, entropy ΔS*, enthalpy ΔH* and Gibss free energy ΔG* were calculated using Coats-Redfern and Horowitz-Metzeger methods at n = 1 or n#1. Some results of bioactivity tests for ligands and their metal complexes were recorded against Gram-positive, Gram-negative bacteria and antifungal. The complexes showed significant more than free ligand.     

Variational analysis of the phenyl + O2 and phenoxy + O reactions

Variational transition state analysis was performed on the barrierless phenyl + O2 and phenoxy + O association reactions. In addition, we also calculated rate constants for the related vinyl radical (C2H3) + O2 and vinoxy radical (C2H3O) + O reactions and provided rate constant estimates for analogous reactions in substituted aromatic systems. Potential energy scans along the dissociating C-OO and CO-O bonds (with consideration of C-OO internal rotation) were obtained at the O3LYP/6-31G(d) density functional theory level. The CO-O and C-OO bond scission reactions were observed to be barrierless, in both phenyl and vinyl systems. Potential energy wells were scaled by G3B3 reaction enthalpies to obtain accurate activation enthalpies. Frequency calculations were performed for all reactants and products and at points along the potential energy surfaces, allowing us to evaluate thermochemical properties as a function of temperature according to the principles of statistical mechanics and the rigid rotor harmonic oscillator (RRHO) approximation. The low-frequency vibrational modes corresponding to R-OO internal rotation were omitted from the RRHO analysis and replaced with a hindered internal rotor analysis using O3LYP/6-31G(d) rotor potentials. Rate constants were calculated as a function of temperature (300-2000 K) and position from activation entropies and enthalpies, according to canonical transition state theory; these rate constants were minimized with respect to position to obtain variational rate constants as a function of temperature. For the phenyl + O2 reaction, we identified the transition state to be located at a C-OO bond length of between 2.56 and 2.16 A (300-2000 K), while for the phenoxy + O reaction, the transition state was located at a CO-O bond length of 2.00-1.90 A. Variational rate constants were fit to a three-parameter form of the Arrhenius equation, and for the phenyl + O2 association reaction, we found k(T) = 1.860 x 1013T-0.217 exp(0.358/T) (with k in cm3 mol-1 s-1 and T in K); this rate equation provides good agreement with low-temperature experimental measurements of the phenyl + O2 rate constant. Preliminary results were presented for a correlation between activation energy (or reaction enthalpy) and pre-exponential factor for heterolytic O-O bond scission reactions.     

Synthesis, characterization and antimicrobial investigation of some moxifloxacin metal complexes

The new complexes of moxifloxacin (MOX), with Ti(IV), Y(III), Pd(II) and Ce(IV) have been synthesized. These complexes were then characterized by melting point, magnetic studies and spectroscopic techniques involving infrared spectra (IR), UV-Vis, (1)H NMR. C, H, N and halogen elemental analysis and thermal behavior of complexes also investigated. The results suggested that the molar ratio for all complexes is M: MOX=1:2 where moxifloxacin acts as a bidentate via one of the oxygen atoms of the carboxylate group and through the ring carbonyl group and the complexes have the following formula [Ti(MOX)(2)](SO(4))(2)·7H(2)O, [Y(MOX)(2)Cl(2)]Cl·12H(2)O, [Pd(MOX)(2)(H(2)O)(2)]Cl(2)·6H(2)O and [Ce(MOX)(2)](SO(4))(2)·2H(2)O. The activation energies, E*, enthalpies, ΔH*, entropies, ΔS* and Gibbs free energies, ΔG*, of the thermal decomposition reactions have been derived from thermogravimetric (TGA) and differential thermogravimetric (DrTG) curves, using Coats-Redfern (CR) and Horowitz-Metzger (HM) methods. The antimicrobial activity of these complexes has been evaluated against three Gram-positive and three Gram-negative bacteria and compared with the reference drug moxifloxacin. The antibacterial activity of Ti(IV) complex is significant for E. coli K32 and highly significant for S. aureus K1, B. subtilis K22, Br. otitidis K76, P. aeruginosa SW1 and K. oxytoca K42 compared with free moxifloxacin.     

Mechanistic study of the deamination reaction of guanine: a computational study

The mechanism for the deamination of guanine with H(2)O, OH(-), H(2)O/OH(-) and for GuaH(+) with H(2)O has been investigated using ab initio calculations. Optimized geometries of the reactants, transition states, intermediates, and products were determined at RHF/6-31G(d), MP2/6-31G(d), B3LYP/6-31G(d), and B3LYP/6-31+G(d) levels of theory. Energies were also determined at G3MP2, G3MP2B3, G4MP2, and CBS-QB3 levels of theory. Intrinsic reaction coordinate (IRC) calculations were performed to characterize the transition states on the potential energy surface. Thermodynamic properties (ΔE, ΔH, and ΔG), activation energies, enthalpies, and Gibbs free energies of activation were also calculated for each reaction investigated. All pathways yield an initial tetrahedral intermediate and an intermediate in the last step that dissociates to products via a 1,3-proton shift. At the G3MP2 level of theory, deamination with OH(-) was found to have an activation energy barrier of 155 kJ mol(-1) compared to 187 kJ mol(-1) for the reaction with H(2)O and 243 kJ mol(-1) for GuaH(+) with H(2)O. The lowest overall activation energy, 144 kJ mol(-1) at the G3MP2 level, was obtained for the deamination of guanine with H(2)O/OH(-). Due to a lack of experimental results for guanine deamination, a comparison is made with those of cytosine, whose deamination reaction parallels that of guanine.