Determination of neutral lactase activity in industrial enzyme preparations by a colorimetric enzymatic method: collaborative study

Thirteen laboratories participated in a collaborative study to validate a colorimetric assay for determining neutral lactase activity in industrial enzyme preparations. Each laboratory received 5 duplicate samples with activity levels of 2000 and 5000 neutral lactase units provided by 4 commercial suppliers. Two laboratories did not return results. Method performance was calculated according to AOAC guidelines. From the 11 remaining laboratories, 3 were excluded from statistical analysis because of invalid data determined during initial review by Youden pair, value versus laboratory. Repeatability relative standard deviation (RSDr) values ranged from 3.20 to 8.62%, and reproducibility relative standard deviation (RSDR) values ranged from 8.77 to 16.35%. With outliers excluded, RSDr values ranged from 2.94 to 5.01%, and RSDR values ranged from 7.50 to 13.84%. The colorimetric enzymatic method for determining neutral lactase activity in industrial enzyme preparations has been adopted first action by AOAC INTERNATIONAL.     

Determination of methylcellulose and hydroxypropyl methylcellulose food gums in food and food products: collaborative study

A collaborative study was performed to determine the reproducibility of a method for the determination of methylcellulose (MC) and hydroxypropyl methylcellulose (HPMC) in food. These widely used food gums possess unusual solubility characteristics and cannot accurately be determined by existing dietary fiber methods. The new method uses the enzyme-digestion procedure of AOAC Official Method 991.43. Digestate solutions must be refrigerated to fully hydrate MC or HPMC. The chilled solutions are filtered and analyzed by size-exclusion liquid chromatography. Collaborating laboratories received 28 samples containing MC or HPMC in the range of 0-100%. The sample set included blind duplicates of 5 food matrixes (bread, milk, fish, potato, and powdered juice drink). Cochran and Grubbs tests were used to eliminate outliers. For food samples containing MC, values for within-laboratory precision, repeatability relative standard deviation (RSDr), ranged from 4.2 to 16%, and values for among-laboratories precision, reproducibility relative standard deviation (RSDR), ranged from 11 to 20%. For HPMC samples, RSDr values ranged from 6.4 to 27%, and RSDR values ranged from 17 to 39%. Recoveries of MC and HPMC from the food matrixes ranged from 78 to 101%. These results show acceptable precision and reproducibility for the determination of MC and HPMC, for which no Official AOAC Methods exist. It is recommended that this method be adopted as AOAC Official First Action.     

Determination of beta-carotene in supplements and raw materials by reversed-phase high pressure liquid chromatography: collaborative study

Twelve laboratories representing 4 countries participated in an interlaboratory study conducted to determine all-trans-veta-carotene and total beta-carotene in dietary supplements and raw materials. Thirteen samples were sent as blind duplicates to the collaborators. Results obtained from 11 laboratories are reported. For products composed as softgels and tablets that were analyzed for total beta-carotene, the reproducibility relative standard deviation (RSDR) ranged from 3.35 to 23.09% and the HorRat values ranged from 1.06 to 3.72. For these products analyzed for trans beta-carotene, the reproducibility relative standard deviation (RSDR) ranged from 4.28 to 22.76% and the HorRat values ranged from 0.92 to 3.37. The RSDr and HorRat values in the analysis of a beadlet raw material were substantial and it is believed that the variability within the material itself introduced significant variation in subsampling. The method uses high pressure liquid chromatography (LC) in the reversed-phase mode with visible light absorbance for detection and quantitation. If high levels of alpha-carotenes are present, a second LC system is used for additional separation and quantitation of the carotene species. It is recommended that the method be adopted as an AOAC Official Method.     

Determination of clopidol residues in chicken tissues by liquid chromatography: collaborative study

Eighteen laboratories participated in a collaborative study on the determination of clopidol residues in chicken muscle tissues by liquid chromatography. Of these, results from 16 laboratories which rigorously followed the method were subjected to statistical analysis. The method performance was assessed by all participants using 14 samples of chicken muscle fortified at concentrations ranging from 0.1 to 5.0 mg/kg. In addition, 9 participants each reported results for 6 clopidol-incurred samples in chicken muscle. Test portions were extracted with acetonitrile, and the extracts were purified with alumina and anion exchange resin solid-phase extraction cartridges in sequence. Clopidol was separated by reversed-phase liquid chromatography and quantified at 270 nm. Average recoveries ranged from 81.8 to 85.4%, reproducibility relative standard deviation (RSDR) ranged from 11.9 to 22.6%, and repeatability relative standard deviation (RSDr) ranged from 9.9 to 15.1%. For clopidol-incurred samples at concentrations of 0.100-0.687 mg/kg, the mean determination value range was 0.099-0.659 mg/kg; RSDR was 12.6-19.8%, RSDr was 3.1-8.5%; and HORRAT values were 0.7-1.1. The accuracy and precision of the method are in conformity with the requirements specified by AOAC INTERNATIONAL. The method was adopted Official First Action in April 2003.     

Measurement of resistant starch by enzymatic digestion in starch and selected plant materials: collaborative study

Interlaboratory performance statistics was determined for a method developed to measure the resistant starch (RS) content of selected plant food products and a range of commercial starch samples. Food materials examined contained RS (cooked kidney beans, green banana, and corn flakes) and commercial starches, most of which naturally contain, or were processed to yield, elevated RS levels. The method evaluated was optimized to yield RS values in agreement with those reported for in vivo studies. Thirty-seven laboratories tested 8 pairs of blind duplicate starch or plant material samples with RS values between 0.6 (regular maize starch) and 64% (fresh weight basis). For matrixes excluding regular maize starch, repeatability relative standard deviation (RSDr) values ranged from 1.97 to 4.2%, and reproducibility relative standard deviation (RSDR) values ranged from 4.58 to 10.9%. The range of applicability of the test is 2-64% RS. The method is not suitable for products with <1% RS (e.g., regular maize starch; 0.6% RS). For such products, RSDr and RSDR values are unacceptably high.     

Determination of total monomeric anthocyanin pigment content of fruit juices, beverages, natural colorants, and wines by the pH differential method: collaborative study

This collaborative study was conducted to determine the total monomeric anthocyanin concentration by the pH differential method, which is a rapid and simple spectrophotometric method based on the anthocyanin structural transformation that occurs with a change in pH (colored at pH 1.0 and colorless at pH 4.5). Eleven collaborators representing commercial laboratories, academic institutions, and government laboratories participated. Seven Youden pair materials representing fruit juices, beverages, natural colorants, and wines were tested. The repeatability relative standard deviation (RSDr) varied from 1.06 to 4.16%. The reproducibility relative standard deviation (RSDR) ranged from 2.69 to 10.12%. The HorRat values were < or = 1.33 for all materials. The Study Director recommends that the method be adopted Official First Action.     

Determination of ginsenosides (ginseng saponins) in dry root powder from Panax ginseng, Panax quinquefolius, and selected commercial products by liquid chromatography: interlaboratory study

Twelve collaborating laboratories assayed 4 products, namely, Panax ginseng, Panax quinquefolius, and 2 ginseng products, for 6 ginsenosides: Rb1, Rb2, Rc, Rd, Re, and Rg1. Collaborators also received a negative control for the recovery study. Pure ginsenosides were provided as reference standards for the liquid chromatography (LC) analysis and the system suitability tests. The LC analyses were performed on the methanol extract using UV detection at 203 nm. For P. ginseng, individual ginsenosides were consistent in their means; repeatability standard deviations (RSDr) ranged from 4.17 to 5.09% and reproducibility standard deviations (RSDR) ranged from 7.27 to 11.3%. For P. quinquefolius, the Rb1 and Rb2 ginsenosides were higher and lower in concentration than P. ginseng, with RSDr values of 3.44 and 6.60% and RSDR values of 5.91 and 12.6% respectively, and other analytes at intermediate precisions. For ginseng commercial products, RSDr values ranged from 3.39 to 8.12%, and RSDR values ranged from 7.65 to 16.5%. A recovery study was also conducted for 3 ginsenosides: Rg1, Re, and Rb1. The average recoveries were 99.9, 96.2, and 92.3%, respectively. The method is not applicable for the determination of Rg1 and Re in ginseng product at levels <300 mg/kg.     

Determination by glyphosate and aminomethylphosphonic acid in crops by capillary gas chromatography with mass-selective detection: collaborative study.

A collaborative study was conducted to validate a method for the determination of glyphosate and aminomethylphosphonic acid (AMPA) in crops. The analytes are extracted from crops with water, and the crude extracts are then subjected to a cation exchange cleanup. The analytes are derivatized by the direct addition of the aqueous extract into a mixture of heptafluorobutanol and trifluoroacetic anhydride. The derivatized analytes are quantitated by capillary gas chromatography with mass-selective detection (MSD). The collaborative study involved 13 laboratories located in 5 countries; 12 laboratories returned valid data sets. The crops tested were field corn grain, soya forage, and walnut nutmeat at concentrations of 0.050, 0.40, and 2.0 mg/kg. The study used a split-level pair replication scheme with blindly coded laboratory samples. Twelve materials were analyzed, including 1 control and 3 split-level pairs for each matrix, 1 pair at each nominal concentration. For glyphosate, the mean recovery was 91%, the average intralaboratory variance, the repeatability relative standard deviation (RSDr), was 11%, and the interlaboratory variance, the reproducibility relative standard deviation (RSDR), was 16%. For AMPA, the mean recovery was 87%, the RSDr was 16%, and the RSDR was 25% at mg/kg levels.     

Determination of pesticide residues in nonfatty foods by supercritical fluid extraction and gas chromatography/mass spectrometry: collaborative study

A collaborative study was conducted to determine multiple pesticide residues in apple, green bean, and carrot by using supercritical fluid extraction (SFE) and gas chromatography/mass spectrometry (GC/MS). Seventeen laboratories from 7 countries participated in the final study, and a variety of different instruments was used by collaborators. The procedure simply entails 3 steps: (1) mix 1.1 g drying agent (Hydromatrix) per 1 g frozen precomminuted sample, and load 4-5.5 g of this mixture into a 7-10 mL extraction vessel; (2) perform SFE for 20-30 min with a 1-2 mL/min flow rate of carbon dioxide at 0.85 g/mL density (320 atm, 60 degrees C); and (3) inject the extract, which was collected on a solid-phase or in a liquid trap, into the gas chromatograph/mass spectrometer, using either an ion-trap instrument in full-scan mode or a quadrupole-type instrument in selected-ion monitoring mode. The ability of GC/MS to simultaneously quantitate and confirm the identity of the semivolatile analytes at trace concentrations is a strong feature of the approach. The selectivity of SFE and GC/MS avoids the need for post-extraction cleanup steps, and the conversion of the CO2 solvent to a gas after SFE eliminates the solvent evaporation step common in traditional methods. The approach has several advantages, but its main drawback is the lower recoveries for the most polar analytes, such as methamidophos and acephate, and the most nonpolar analytes, such as pyrethroids. Recoveries for most pesticides are >75%, and recoveries of nonpolar analytes are still >50%. The (within-laboratory) repeatability relative standard deviation (RSDr) values of the recoveries are generally <15%. More specifically, the average results from the 9-14 laboratories in the final analysis of 6 blind duplicates at 3 concentrations for each pesticide are as follows: carbofuran in apple (75-500 ng/g), 89% recovery, 7% RSDr, 9% reproducibility relative standard deviation (RSDR); diazinon in apple (60-400 ng/g), 83% recovery, 13% RSDr, 17% RSDR; vinclozolin in apple (6-400 ng/g), 97% recovery, 13% RSDr, 18% RSDR; chlorpyrifos in apple (50-300 ng/g), 105% recovery, 11% RSDr, 13% RSDR; endosulfan sulfate in apple (150-1000 ng/g), 95% recovery, 15% RSDr, 17% RSDR; trifluralin in green bean (30-200 ng/g), 58% recovery, 11% RSDr, 27% RSDR; dacthal in green bean (60-400 ng/g), 88% recovery, 11% RSDr, 17% RSDR; quintozene in green bean (60-400 ng/g), 79% recovery, 13% RSDr, 18% RSDR; chlorpyrifos in green bean (50-300 ng/g), 84% recovery, 11% RSDr, 17% RSDR; p,p'-DDE in green bean (45-300 ng/g), 64% recovery, 14% RSDr, 27% RSDR; atrazine in carrot (75-500 ng/g), 90% recovery, 11% RSDr, 15% RSDR; metalaxyl in carrot (75-500 ng/g), 89% recovery, 8% RSDr, 12% RSDR; parathion-methyl in carrot (75-500 ng/g), 84% recovery, 14% RSDr, 15% RSDR; chlorpyrifos in carrot (50-300 ng/g), 77% recovery, 13% RSDr, 19% RSDR; and bifenthrin in carrot (90-600 ng/g), 63% recovery, 12% RSDr, and 25% RSDR. All analytes except for the nonpolar compounds trifluralin, p,p'-DDE, and bifenthrin gave average Horwitz ratios of <1.0 when AOAC criteria were used. These 3 analytes had high RSDr values but lower RSDR values, which indicated that certain SFE instruments gave consistently lower recoveries for nonpolar compounds. The collaborative study results demonstrate that the method meets the purpose of many monitoring programs for pesticide residue analysis, and the Study Director recommends that it be adopted Official First Action.     

Determination of moisture and fat in meats by microwave and nuclear magnetic resonance analysis: collaborative study

Ten laboratories participated in a collaborative study to determine the total moisture and fat in raw and processed meat products by microwave drying and nuclear magnetic resonance (NMR) spectroscopy. Meat products were prepared following the AOAC Method and analyzed using CEM Corp.'s SMART Trac Moisture and Fat Analysis system. SMART Trac provides moisture results by measuring the weight loss on drying by microwave energy. The dried sample is then analyzed by NMR spectrometry for fat content. Moisture and fat results are displayed and reported by the SMART Trac as a percentage (g/100 g). Microwave drying is an AOAC-approved reference method (Method 985.14), Moisture in Meat and Poultry Products. NMR spectrometry is a secondary technique used to determine the concentration of various constituents in biological, organic, or chemical samples. The study design was based on Youden's matched pair principle for collaborative tests. For the purposes of this study, 10 laboratories each tested 10 Youden matched pairs, for a total of 20 samples. The study samples represented a range of products processed daily in plant operations. Included were raw meat samples (beef, pork, chicken, and turkey) as well as processed meats (beef hot dog, pork sausage, and ham). The total moisture content of the undiluted samples, as received for the purposes of this study, was determined by AOAC Method 950.46 and ranged from 54.03 to 74.99%. The total fat content of the undiluted samples was determined by AOAC Method 960.39 and ranged from 1.00 to 29.79%. Statistical analysis of study results for total moisture yielded a relative standard deviation for repeatability (RSDr) range of 0.14 to 0.95% and a relative standard deviation for reproducibility (RSDR) range of 0.26 to 0.95%. Statistical analysis for total fat yielded similar RSDr and RSDR range of 0.74 to 4.08%. Results for turkey had higher RSDr and RSDR values, both at 12.6%, due to low fat content and possibly to the separation of the samples observed by some of the collaborators. Results demonstrate that microwave drying with NMR is a rapid, practical method providing results equivalent to AOAC Methods 950.46 (Forced Air Oven Drying) and 960.39 (Soxhlet Ether Extraction) in raw and processed meat products.     

Determination of monensin, narasin, and salinomycin in mineral premixes, supplements, and animal feeds by liquid chromatography and post-column derivatization: collaborative study

A liquid chromatographic (LC) method for the analysis of monensin, narasin, and salinomycin in mineral premixes, supplements, and complete animal feeds at medicating and trace levels was collaboratively studied. The method uses methanol-water (90 + 10) extraction with mechanical shaking for 1 h, filtration, and dilution if necessary. Determination of the 3 ionophores is by reversed-phase LC using post-column derivatization with vanillin and detection at 520 nm. Suspect positive trace-level products and medicated feeds containing unexpected ionophores are confirmed by hexane extraction or post-column derivatization with dimethylaminobenzaldehyde (DMAB). Twenty-five test samples of medicated feeds, supplements, and mineral and drug premixes, and 9 test samples for trace-level analysis were sent to 11 collaborators in Bulgaria, Czech Republic, Portugal, France, The Netherlands, United States, and Canada. Acceptable results were received from 10 laboratories. For the medicated complete feeds, supplements, and mineral premixes, RSDr values (within-laboratory repeatability) ranged from 2.5 to 5.2%, RSDR values (among-laboratory reproducibility) ranged from 2.7 to 6.8%, and HorRat values ranged from 0.31 to 1.30. For the drug premixes, the result variability was excessive and HorRat values ranged from 2.27 to 14.1. For the trace-level test samples, all laboratories correctly identified the analytes and did not report any false positives. RSDr values ranged from 1.3 to 9.5%, RSDR values ranged from 5.2 to 13.1%, and HorRat values ranged from 0.4 to 0.97.     

Determination of phytase activity in feed: interlaboratory study

An interlaboratory study was conducted to determine the performance characteristics of a new method for the determination of phytase activity in feed samples. The method is based on the principle that inorganic phosphate is released from the substrate phytate under defined assay conditions and has been validated for its suitability to measure the enzyme activity of various phytase products. Two different experimental designs of the study were applied, allowing for the estimation of the precision of the method under repeatability, intermediate precision and reproducibility conditions, respectively. The relative standard deviation for repeatability (RSDr) ranged from 2.2 to 10.6% and the RSD for reproducibility (RSDR) ranged from 5.4 to 15%. The suitability of the validated method for the intended purpose was demonstrated. The obtained performance profile of the method validated in this study was comparable to that of similar methods that were exclusively validated for one phytase product.     

Determination of lasalocid sodium in animal feeds and premixes by reversed-phase liquid chromatography: collaborative study

A liquid chromatographic (LC) method for the analysis of lasalocid sodium in premixes, complete animal feeds, and trace-level feeds was collaboratively studied. The method employs a 0.5% HCI acidified methanol extraction followed by 20 min sonication in a water bath heated to 40 degrees C. Samples are then shaken on a mechanical shaker for 1 h and stored overnight, followed by an additional 10 min shaking the following morning. Sample extracts are diluted if necessary with extractant, filtered, and injected onto an LC system. Determination of all lasalocid homologs is by reversed-phase LC with fluorescence detection at 314 nm excitation and 418 nm emission. Eight samples of drug premixes, medicated feeds, and mineral supplements, along with 2 samples for trace-level analysis were sent to 20 collaborators in the United States, Canada, and The Netherlands. Study data were returned by 17 laboratories. Two additional supplemental trace-level samples and a blank feed were provided to 15 of the collaborating laboratories, and test data were received from all 15 participants. For the drug premixes, medicated feeds, and mineral supplements, RSDr values (within-laboratory repeatability) ranged from 1.2 to 19.9%, RSDR values (among-laboratory reproducibility) ranged from 3.4 to 32.3%, and HorRat values ranged from 0.35 to 3.73. For the trace-level samples, only lasalocid A, the predominant homolog comprising > 90% of the sum of all homolog peak area, was quantified. All laboratories correctly identified the analyte. Although some instrument response was reported by a number of laboratories for the blank feed, all but one laboratory's results were well below the 1 mg/kg limit of quantification. RSDr values for the initial 2 trace-level samples were excessive, ranging from 51.6 to 64.4%. RSDR values ranged from 51.6 to 75.7%, and HorRat values ranged from 3.6 to 4.0. Data for the initial trace-level samples indicated that the test samples were improperly prepared to ensure homogeneity, and a new set of supplemental samples was provided to collaborators, with significantly improved results. RSDr values for the 2 supplemental trace-level samples ranged from 1.6 to 2.5%, RSDR values ranged from 5.6 to 9.2%, and HorRat values ranged from 0.43 to 0.62.     

Method performance study of the determination of total nitrogen in soy sauce by the Kjeldahl method.

The objective of this collaborative study was to evaluate the proposed method for determining the total nitrogen in soy sauce by the Kjeldahl method submitted to the Codex Alimentarius Commission for endorsement in accordance with the protocol for the design, conduct, and interpretation of method-performance studies. The digestive conditions of the proposed method are the addition of 10 mL of H2SO4, 10 g (8 g by using a block digester) of K2SO4, and 1 mL of 20% CuSO4 x 5H2O and 80 min boiling period after the liquid is cleared by a heating device. Seventeen laboratories participated, analyzing five soy sauce samples as blind duplicates. Since the volume sampling method used in the JAS (Japanese Agricultural Standard) method showed lower accuracy of data because of the density of soy sauce, the method of sampling by weight was adopted as the proposed method. The total amount of outlier data was within acceptable limits for method-performance studies (< or = 22.2%). Lysine and ammonium sulfate recoveries for all laboratories were > or = 98% and > or = 99% respectively. The RSDr (repeatability relative standard deviation) values ranged from 0.4 to 1.3%, and the RSDR (reproducibility relative standard deviation) values were from 0.8 to 1.9%. HORRAT (RSDR/predicted RSDR) for the reproducibility showed 0.2 to 0.4, indicating acceptable precision of the method and excellent analytical performance.     

Determination of sodium in foods by flame atomic absorption spectrometry after microwave digestion: NMKL interlaboratory study

Nine laboratories participated in an interlaboratory method performance (collaborative) study of a method for the determination of sodium in foods by flame atomic absorption spectrometry after wet digestion, using a microwave oven technique. Before the study, the laboratories were able to practice on samples with defined sodium levels (pretrial test). The method was tested on a total of 6 foods (broccoli, carrot, bread, saithe fillet, pork, and cheese) with sodium concentrations of 1480-8260 mg/kg. The materials were presented to the participants in the study as blind duplicates, and the participants were asked to perform single determinations for each sample. The repeatability relative standard deviations (RSDr) for sodium ranged from 1.9 to 6.5%. The reproducibility relative standard deviations (RSDR) ranged from 4.2 to 6.9%. The HorRat values ranged from 0.9 to 1.6.     

Determination of mercury in seafood by flow injection-cold vapor atomic absorption spectrometry after microwave digestion: NMKL interlaboratory study. Nordic Committee on Food Analysis

Ten laboratories participated in an interlaboratory method-performance (collaborative) study of a method for the determination of mercury in foods of marine origin by flow injection-cold vapor atomic absorption spectrometry after wet digestion using a microwave oven technique. The study was preceded by a training round of samples of known identity. The method was tested on a total of 7 seafood products: blue mussel (Mytilus edulis), cod muscle (Gadus morhua), crab (Cancer pagurus), scampi (Nephrops norwegicus), black scabbard fish (Aphnopus carbo), longnose velvet dogfish (Centroscymus crepidater), and Portuguese dogfish (Cenbroscymus coelolepis) with mercury concentrations of 0.14, 0.24, 0.35, 0.59,11.42, 4.2, and 13.2 microg/g, respectively. The materials were presented to the participants in the study as blind duplicates, and the participants were asked to perform single determinations on each sample. Repeatability relative standard deviations (RSDr) for mercury ranged from 2.4 to 14.0%. Reproducibility relative standard deviations (RSDR) ranged from 7.7 to 16.6%. HORRAT values for all samples were <1.0.     

Determination of docosahexaenoic acid and n-3 fatty acids in refined fish oils by 1H-NMR spectroscopy: IUPAC interlaboratory study

A high-resolution proton nuclear magnetic resonance (NMR) method for determining the concentration (mg/g) of docosahexaenoic acid (DHA), the molar proportion (mol%) of DHA, and the molar proportion of total n-3 fatty acids in fish oils was validated by an IUPAC interlaboratory study (the Commission VI-6 on Oils, Fats, and Derivatives WG 3/98). Thirteen laboratories from 5 countries tested 6 pairs of blind duplicate fish oils: a refined tuna oil, 2 extracted tuna oils, an extracted bonito oil, an extracted salmon oil, and an extracted sardine oil ranging from 9 to 30 mol% DHA and from 20 to 35 mol% n-3 fatty acids. Before 1 D-proton NMR measurements with 300-500 MHz instruments, oil samples were weighed and diluted with deuterochloroform solution containing ethylene glycol dimethyl ether as internal standard. To achieve precise performance, a detailed procedure for signal area measurement was described in the protocol, and all participants were instructed about the critical importance of following the protocol. Statistical performances with invalid and outlier data removed were as follows: repeatability relative standard deviations (RSDr) ranged from 0.91 to 2.62% and reproducibility relative standard deviation (RSDR) ranged from 1.73 to 4.27% for DHA concentration (mg/g); RSDr ranged from 0.39 to 2.06%, and RSDR ranged from 0.59 to 3.46% for mol% DHA; RSDr ranged from 0.23 to 0.90% and RSDR ranged from 0.85 to 2.01 % for mol% total n-3 fatty acids. The method is expected to be recommended by IUPAC.     

Determination of arsenic in seafood by electrothermal atomic absorption spectrometry after microwave digestion: NMKL collaborative study

Eight laboratories participated in an interlaboratory method performance (collaborative) study of a method for the determination of arsenic in foodstuffs of marine origin by electrothermal atomic absorption spectrometry after wet digestion using a microwave oven technique. The study was preceded by a practice round of familiarization samples. The method was tested on 8 materials (cod roe, krill, blue mussel, saithe, scampi, cod fillet, shrimp, and cod extract) ranging in As content from 2 to 75 mg/kg. The materials were sent to participants in the study as blind duplicates, and the participants were asked to perform single determinations on each sample. Repeatability relative standard deviations (RSDr) for As ranged from 6.8 to 17.4%. Reproducibility relative standard deviations (RSDR) ranged from 7.6 to 24%. The highest RSDR value was found for the sample with the highest concentration of As.     

Determination of the acid value of instant noodles: interlaboratory study

An interlaboratory study was performed to evaluate the method for determining the acid value of instant noodles, based on the Japanese Agricultural Standard (JAS), with extraction of lipid using petroleum ether at a volume of 100 mL to the test portion of 25 g. Thirteen laboratories participated and analyzed 5 test samples as blind duplicates. Statistical treatment revealed that the repeatability (RSDr) of acid value was <6.5%, and the reproducibility (RSDR) of acid value was <9.6%. The HorRat values (RSDR/predicted RSDR) were 1.2-1.8, where the RSDR and the predicted RSDR were obtained in terms of free fatty acids in the noodles per unit weight, using the equation [acid value = percent free fatty acids (as oleic) x 1.99] and the extracted lipid contents. This method was shown to have acceptable precision by the present study.     

Liquid chromatographic determination of deoxynivalenol in baby food and animal feed: interlaboratory study

An interlaboratory study was conducted for the determination of deoxynivalenol in baby food and animal feed by high-performance liquid chromatography with UV detection. The study included 14 participants representing a cross section of industry, official food control, and research facilities. Mean recoveries reported ranged from 89% (at 120 microg/kg) to 85% (at 240 microg/kg) for baby food and from 100% (at 200 microg/kg) to 93% (at 400 microg/kg) for animal feed. On the basis of the results for spiked samples (blind duplicates at 2 levels), as well as those for naturally contaminated samples (blind duplicates at 3 levels), the relative standard deviation for repeatability (RSDr) in analyses of baby food ranged from 6.4 to 14.0% and in analyses of animal feed, from 6.1 to 16.5%. The relative standard deviation for reproducibility (RSDR) in analyses of baby food ranged from 9.4 to 19.5% and in analyses of animal feed, from 10.5 to 25.2%. The HorRat values ranged from 0.4 to 1.0 and from 0.7 to 1.3, for baby food and animal feed, respectively. The method showed acceptable performance for within-laboratory and between-laboratory precision for each matrix, as required by European legislation.